Function added to arch_init.c because it depends on arch-specific
settings.
Changes v1 -> v2:
- Move qemu_read_default_config_file() prototype to qemu-config.h
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add -spice command line switch. Has support setting passwd and port for
now. With this patch applied the spice client can successfully connect
to qemu. You can't do anything useful yet though.
Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently the commandline to create a virtual-filesystem pass-through between
the guest and the host is as follows:
#qemu -fsdev fstype,id=ID,path=path/to/share \
-device virtio-9p-pci,fsdev=ID,mount_tag=tag \
This patch provides a syntactic short-cut to achieve the same as follows:
#qemu -virtfs fstype,path=path/to/share,mount_tag=tag
This will be internally expanded as:
#qemu -fsdev fstype,id=tag,path=path/to/share, \
-device virtio-9p-pci,fsdev=tag,mount_tag=tag \
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch creates a new command line option named -fsdev to hold any file
system specific information.
The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id: Identifier used to refer to this fsdev
path: The path on the host that is identified by this fsdev.
[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu_config_parse gets the option groups as a parameter now instead of
hardcoding the VM configuration groups. This way it can be used for other
configurations, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new function qemu_read_config_file which reads the VM configuration
from a config file. Unlike qemu_config_parse it doesn't take a open file but a
filename and reduces code duplication as a side effect.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New LOC_FILE. Use it for tracking file name and line number in
qemu_config_parse(). We now report errors like
qemu:foo.conf:42: Did not find I2C bus for smbus-eeprom
In particular, gems like this message:
-device: no driver specified
become almost nice now:
qemu:foo.conf:44: -device: no driver specified
(A later commit will get rid of the bogus -device:)
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.
A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration. It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage. The other
consideration was providing models names reflective of
current processors. Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.
This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models. Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.
Proposed new model definitions are provided here for current
AMD and Intel processors. Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.
A table of names/model_ids may be queried via "-cpu ?model":
:
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
:
Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.
The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:
# qemu-system-x86_64 ... -cpu Nehalem,check
warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]
A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.
Configuration data for a cpu model resides in the target config
file which by default will be installed as:
/usr/local/etc/qemu/target-<arch>.conf
The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.
Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.
This patch was tested relative to qemu.git.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch reworks the -monitor handling:
- It adds a new "mon" QemuOpts list for the monitor(s).
- It adds a monitor_parse() function to parse the -monitor switch.
- It adds a mon_init function to initialize the monitor(s) from the
"mon" QemuOpts list.
- It winds up everything and removes the old bits.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds infrastructure and command line option for setting
global defaults for device properties, i.e. you can for example use
-global virtio-blk-pci.vectors=0
to turn off msi by default for all virtio block devices. The config
file syntax is:
[global]
driver = "virtio-blk-pci"
property = "vectors"
value = "0"
This can also be used to set properties for devices which are not
created via -device but implicitly via machine init, i.e.
-global isa-fdc,driveA=<name>
This patch uses the mechanism which configures properties for the
compatibility machine types (pc-0.10 & friends). The command line
takes precedence over the machine type values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add functions to parse QemuOpts from a git-style config file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a function to write the QemuOpts configuration to a git-style
config file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The first step in porting -net to QemuOpts. We do not include parameter
descriptions in the QemuOptsList because we use the first parameter to
choose which descriptions validate against.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Deprecate -localtime, -setdate and -rtc-td-hack in favor of a new
unified command line switch:
-rtc [base=utc|localtime|date][,driftfix=none|slew]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
start switching chardevs to QemuOpts. This patch adds the
infrastructure and converts the null device.
The patch brings two new functions:
qemu_chr_open_opts()
same as qemu_chr_open(), but uses QemuOpts instead of a
option char string.
qemu_chr_parse_compat()
accepts a traditional chardev option string, returns the
corresponding QemuOpts instance, to handle backward
compatibility.
The patch also adds a new -chardev switch which can be used to create
named+unconnected chardevs, like this:
-chardev null,id=test
This uses the new qemu_chr_open_opts. Thus with this patch alone only
the null device works. The other devices will follow ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu-option.h has no protection against including it twice.
This patch adds the usual "#ifndef header" bits.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make -device switch use the QemuOpts framework.
Everything should continue to work like it did before.
New: "-set device.$id.$property=$value" works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
One use case will be file for drives (no filename quoting issues), i.e.
-drive id=test,if=virtio
-set drive.test.file=/vmdisk/test-virtio.img
It will work for any other option (assuming handled by QemuOpts) though.
Except for id= for obvious reasons ;).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
