Linux recently added a new io_uring(7) optimization API that QEMU
doesn't take advantage of yet. The liburing library that QEMU uses
has added a corresponding new API calling io_uring_register_ring_fd().
When this API is called after creating the ring, the io_uring_submit()
library function passes a flag to the io_uring_enter(2) syscall
allowing it to skip the ring file descriptor fdget()/fdput()
operations. This saves some CPU cycles.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20220531105011.111082-1-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include the full path in TARGET_DIR, so that messages from sub-Makefiles
are clearer. Also, prepare for possibly building firmware outside
pc-bios/ from the Makefile,
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While at it, remove a dead assignment and simply inline the value of the
"target" variable, which is used just once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to spec:
"TSEG Enable (T_EN): Enabling of SMRAM memory for Extended SMRAM space
only. When G_SMRAME = 1 and TSEG_EN = 1, the TSEG is enabled to appear
in the appropriate physical address space. Note that once D_LCK is set,
this bit becomes read only."
Changed to match the spec description.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220615034501.2733802-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The existing check has two problems:
1. Meson uses a private directory for the get_supported_arguments check.
./instrumentation-filter does not exist in that private directory (it is
copied into the root of the build-directory).
2. fsanitize-coverage-allowlist is unused when coverage instrumentation
is not configured. No instrumentation are passed for the
get_supported_arguments check
Thus the check always fails. To work around this, change the check to an
"if cc.compiles" check and provide /dev/null, instead of the real
filter.
Meson log:
Working directory: build/meson-private/tmpl6wld2d9
Command line: clang-13 -m64 -mcx16
build/meson-private/tmpl6wld2d9/output.obj -c -O3 -D_FILE_OFFSET_BITS=64
-O0 -Werror=implicit-function-declaration -Werror=unknown-warning-option
-Werror=unused-command-line-argument
-Werror=ignored-optimization-argument
-fsanitize-coverage-allowlist=instrumentation-filter
Error:
error: argument unused during compilation:
'-fsanitize-coverage-allowlist=instrumentation-filter'
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220614155415.4023833-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tests/vm/Makefile.include used to assume that it could run in an unconfigured
source tree, and Cirrus CI relies on that. It was however broken by commit
f4c66f1705 ("tests: use tests/venv to run basevm.py-based scripts", 2022-06-06),
which co-opted the virtual environment being used by avocado tests
to also run the basevm.py tests.
For now, reintroduce the usage of qemu.qmp from the source directory, but
without the sys.path() hacks. The CI configuration can be changed to
install the package via pip when qemu.qmp is removed from the source tree.
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place it only inside the 'if test "$pie" = "no"' conditional. Since
commit 43924d1e53 ("pc-bios/optionrom: detect -fno-pie", 2022-05-12),
the PIE options are detected independently by pc-bios/optionrom/Makefile,
and the CFLAGS_NOPIE/LDFLAGS_NOPIE variables are not used anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make virtio_mmio_soft_reset reset the virtio device, which is performed by
both the "soft" and the "hard" reset; and then call virtio_mmio_soft_reset
from virtio_mmio_reset to emphasize that the latter is a superset of the
former.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All calls to virtio_bus_reset are preceded by virtio_bus_stop_ioeventfd,
move the call in virtio_bus_reset: that makes sense and clarifies
that the vdc->reset function is called with ioeventfd already stopped.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the queue PFN is set to zero on a virtio-mmio device, the device is reset.
In that case however the virtio_bus_stop_ioeventfd function was not
called; add it so that the behavior is similar to when status is set to 0.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call virtio_bus_reset instead of virtio_reset, so that the function
need not receive the VirtIODevice.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Of the block device commands, those that are available outside system
emulators do not require a fully constructed machine by definition.
Allow running them before machine initialization has concluded.
Of the ones that are available inside system emulation, allow querying
the PR managers, and setting up accounting and throttling.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the user to request only a specific subset of statistics.
This can be useful when working on a feature or optimization that is
known to affect that statistic.
Example:
(qemu) info stats vcpu halt_poll_fail_ns
provider: kvm
halt_poll_fail_ns (cumulative, ns): 0
In case multiple providers have the same statistic, the provider can be
specified too:
(qemu) info stats vcpu halt_poll_fail_ns kvm
provider: kvm
halt_poll_fail_ns (cumulative, ns): 0
Extracted from a patch by Mark Kanda.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow retrieving only a subset of statistics. This can be useful
for example in order to plot a subset of the statistics many times
a second: KVM publishes ~40 statistics for each vCPU on x86; retrieving
and serializing all of them would be useless.
Another use will be in HMP in the following patch; implementing the
filter in the backend is easy enough that it was deemed okay to make
this a public interface.
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vcpu",
"vcpus": [ "/machine/unattached/device[2]",
"/machine/unattached/device[4]" ],
"providers": [
{ "provider": "kvm",
"names": [ "l1d_flush", "exits" ] } } }
{ "return": {
"vcpus": [
{ "path": "/machine/unattached/device[2]"
"providers": [
{ "provider": "kvm",
"stats": [ { "name": "l1d_flush", "value": 41213 },
{ "name": "exits", "value": 74291 } ] } ] },
{ "path": "/machine/unattached/device[4]"
"providers": [
{ "provider": "kvm",
"stats": [ { "name": "l1d_flush", "value": 16132 },
{ "name": "exits", "value": 57922 } ] } ] } ] } }
Extracted from a patch by Mark Kanda.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the user to request statistics for a single provider of interest.
Extracted from a patch by Mark Kanda.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow retrieving the statistics from a specific provider only.
This can be used in the future by HMP commands such as "info
sync-profile" or "info profile". The next patch also adds
filter-by-provider capabilities to the HMP equivalent of
query-stats, "info stats".
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vm",
"providers": [
{ "provider": "kvm" } ] } }
The QAPI is a bit more verbose than just a list of StatsProvider,
so that it can be subsequently extended with filtering of statistics
by name.
If a provider is specified more than once in the filter, each request
will be included separately in the output.
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an HMP command to retrieve statistics collected at run-time.
The command will retrieve and print either all VM-level statistics,
or all vCPU-level statistics for the currently selected CPU.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the knowledge of IEC and SI prefixes out of size_to_str and
freq_to_str, so that it can be reused when printing statistics.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a simple filtering of statistics, that allows to retrieve
statistics for a subset of the guest vCPUs. This will be used for
example by the HMP monitor, in order to retrieve the statistics
for the currently selected CPU.
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vcpu",
"vcpus": [ "/machine/unattached/device[2]",
"/machine/unattached/device[4]" ] } }
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for querying fd-based KVM stats - as introduced by Linux kernel
commit:
cb082bfab59a ("KVM: stats: Add fd-based API to read binary stats data")
This allows the user to analyze the behavior of the VM without access
to debugfs.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gathering statistics is important for development, for monitoring and
for performance measurement. There are tools such as kvm_stat that do
this and they rely on the _user_ knowing the interesting data points
rather than the tool (which can treat them as opaque).
The commands introduced in this commit introduce QMP support for
querying stats; the goal is to take the capabilities of these tools
and making them available throughout the whole virtualization stack,
so that one can observe, monitor and measure virtual machines without
having shell access + root on the host that runs them.
query-stats returns a list of all stats per target type (only VM
and vCPU to start); future commits add extra options for specifying
stat names, vCPU qom paths, and providers. All these are used by the
HMP command "info stats". Because of the development usecases around
statistics, a good HMP interface is important.
query-stats-schemas returns a list of stats included in each target
type, with an option for specifying the provider. The concepts in the
schema are based on the KVM binary stats' own introspection data, just
translated to QAPI.
There are two reasons to have a separate schema that is not tied to
the QAPI schema. The first is the contents of the schemas: the new
introspection data provides different information than the QAPI data,
namely unit of measurement, how the numbers are gathered and change
(peak/instant/cumulative/histogram), and histogram bucket sizes.
There's really no reason to have this kind of metadata in the QAPI
introspection schema (except possibly for the unit of measure, but
there's a very weak justification).
Another reason is the dynamicity of the schema. The QAPI introspection
data is very much static; and while QOM is somewhat more dynamic,
generally we consider that to be a bug rather than a feature these days.
On the other hand, the statistics that are exposed by QEMU might be
passed through from another source, such as KVM, and the disadvantages of
manually updating the QAPI schema for outweight the benefits from vetting
the statistics and filtering out anything that seems "too unstable".
Running old QEMU with new kernel is a supported usecase; if old QEMU
cannot expose statistics from a new kernel, or if a kernel developer
needs to change QEMU before gathering new info from the new kernel,
then that is a poor user interface.
The framework provides a method to register callbacks for these QMP
commands. Most of the work in fact is done by the callbacks, and a
large majority of this patch is new QAPI structs and commands.
Examples (with KVM stats):
- Query all VM stats:
{ "execute": "query-stats", "arguments" : { "target": "vm" } }
{ "return": [
{ "provider": "kvm",
"stats": [
{ "name": "max_mmu_page_hash_collisions", "value": 0 },
{ "name": "max_mmu_rmap_size", "value": 0 },
{ "name": "nx_lpage_splits", "value": 148 },
... ] },
{ "provider": "xyz",
"stats": [ ... ] }
] }
- Query all vCPU stats:
{ "execute": "query-stats", "arguments" : { "target": "vcpu" } }
{ "return": [
{ "provider": "kvm",
"qom_path": "/machine/unattached/device[0]"
"stats": [
{ "name": "guest_mode", "value": 0 },
{ "name": "directed_yield_successful", "value": 0 },
{ "name": "directed_yield_attempted", "value": 106 },
... ] },
{ "provider": "kvm",
"qom_path": "/machine/unattached/device[1]"
"stats": [
{ "name": "guest_mode", "value": 0 },
{ "name": "directed_yield_successful", "value": 0 },
{ "name": "directed_yield_attempted", "value": 106 },
... ] },
] }
- Retrieve the schemas:
{ "execute": "query-stats-schemas" }
{ "return": [
{ "provider": "kvm",
"target": "vcpu",
"stats": [
{ "name": "guest_mode",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "instant" },
{ "name": "directed_yield_successful",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "cumulative" },
... ]
},
{ "provider": "kvm",
"target": "vm",
"stats": [
{ "name": "max_mmu_page_hash_collisions",
"unit": "none",
"base": 10,
"exponent": 0,
"type": "peak" },
... ]
},
{ "provider": "xyz",
"target": "vm",
"stats": [ ... ]
}
] }
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implemenet rmdir and __getcwd. __getcwd is the undocumented
back end to getcwd(3).
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This change adds a new member, refresh_rate to QemuUIInfo in
include/ui/console.h. It represents the refresh rate of the
physical display backend, and it is more appropriate than
GUI update interval as the refresh rate which the emulated device
reports:
- sdl may set GUI update interval shorter than the refresh rate
of the physical display to respond to user-generated events.
- sdl and vnc aggressively changes GUI update interval, but
a guests is typically not designed to respond to frequent
refresh rate changes, or frequent "display mode" changes in
general. The frequency of refresh rate changes of the physical
display backend matches better to the guest's expectation.
QemuUIInfo also has other members representing "display mode",
which makes it suitable for refresh rate representation. It has
a throttling of update notifications, and prevents frequent changes
of the display mode.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-3-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The returned value is not used and misleading.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It only needs to update the scanouts containing the rect area
coming with the resource-flush request from the guest.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20220505214030.4261-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When launching QEMU with "-loadvm", usbredir_create_parser() should avoid
setting up the hello packet (just as with "-incoming". On the latest version
of libusbredir, usbredirparser_unserialize() will return error if the parser
is not "pristine."
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20220507041850.98716-1-j@getutm.app>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'active' bit passes control over a qTD between the guest and the
controller: set to 1 by guest to enable execution by the controller,
and the controller sets it to '0' to hand back control to the guest.
ehci_state_writeback write two dwords to main memory using DMA:
the third dword of the qTD (containing dt, total bytes to transfer,
cpage, cerr and status) and the fourth dword of the qTD (containing
the offset).
This commit makes sure the fourth dword is written before the third,
avoiding a race condition where a new offset written into the qTD
by the guest after it observed the status going to go to '0' gets
overwritten by a 'late' DMA writeback of the previous offset.
This race condition could lead to 'cpage out of range (5)' errors,
and reproduced by:
./qemu-system-x86_64 -enable-kvm -bios $SEABIOS/bios.bin -m 4096 -device usb-ehci -blockdev driver=file,read-only=on,filename=/home/aengelen/Downloads/openSUSE-Tumbleweed-DVD-i586-Snapshot20220428-Media.iso,node-name=iso -device usb-storage,drive=iso,bootindex=0 -chardev pipe,id=shell,path=/tmp/pipe -device virtio-serial -device virtconsole,chardev=shell -device virtio-rng-pci -serial mon:stdio -nographic
(press a key, select 'Installation' (2), and accept the default
values. On my machine the 'cpage out of range' is reproduced while
loading the Linux Kernel about once per 7 attempts. With the fix in
this commit it no longer fails)
This problem was previously reported as a seabios problem in
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/OUTHT5ISSQJGXPNTUPY3O5E5EPZJCHM3/
and as a nixos CI build failure in
https://github.com/NixOS/nixpkgs/issues/170803
Signed-off-by: Arnout Engelen <arnout@bzzt.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit added a new emulated device called CanoKey to QEMU.
CanoKey implements platform independent features in canokey-core
https://github.com/canokeys/canokey-core, and leaves the USB implementation
to the platform.
In this commit the USB part was implemented in QEMU using QEMU's USB APIs,
therefore the emulated CanoKey can communicate with the guest OS using USB.
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <YoY6Mgph6f6Hc/zI@Sun>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since about 2018 virglrenderer (commit fa835b0f88 "vrend: don't
hardcode context version") tries to open the highest available GL
context version. This is done by creating the known GL context
versions from the highest to the lowest until (*create_gl_context)
returns a context != NULL.
This does not work properly with
the current QEMU gd_gl_area_create_context() function, because
gdk_gl_context_realize() on Wayland creates a version 3.0 legacy
context if the requested GL context version can't be created.
In order for virglrenderer to find the highest available GL
context version, return NULL if the created context version is
lower than the requested version.
This fixes the following error:
QEMU started with -device virtio-vga-gl -display gtk,gl=on.
Under Wayland, the guest window remains black and the following
information can be seen on the host.
gl_version 30 - compat profile
(qemu:5978): Gdk-WARNING **: 16:19:01.533:
gdk_gl_context_set_required_version
- GL context versions less than 3.2 are not supported.
(qemu:5978): Gdk-WARNING **: 16:19:01.537:
gdk_gl_context_set_required_version -
GL context versions less than 3.2 are not supported.
(qemu:5978): Gdk-WARNING **: 16:19:01.554:
gdk_gl_context_set_required_version -
GL context versions less than 3.2 are not supported.
vrend_renderer_fill_caps: Entering with stale GL error: 1282
To reproduce this error, an OpenGL driver is required on the host
that doesn't have the latest OpenGL extensions fully implemented.
An example for this is the Intel i965 driver on a Haswell processor.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220605085131.7711-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The counterpart function for gd_gl_area_create_context() is
currently empty. Implement the gd_gl_area_destroy_context()
function to avoid GL context leaks.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220605085131.7711-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- fix compiler abi for test-armv6m-undef
- fix isns suffixes for i386 tcg tests
- fix gitlab cfi jobs
- fix makefile docker invocation
- don't enable xtensa-linux-user builds with system compiler
- fix CIRRUS_nn var checking
- don't spam the aarch64/32 runners with too many jobs at once
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmKnxfUACgkQ+9DbCVqe
KkSksAf/eXGL/k0zUU4RmxmQGWatCPPfbdxWj/pRDJrZl4cvegYK4cqXcfblDkiJ
f5kdB4FsSHgJUKic7K7sBSke2xgoi2bvBMeqNIknLo89b+xXZLJSzTE7XCi0W+hm
ll3GtHNJMEPjrIhSIAsqiSMFloL5xi7uz+ylBAB49skGF6F3rkCMv4fl7TDFKqaH
y5fRzLZMJg+FhlHNwGO0H8O32ZU7FlyqLGQT3JWZywR0n241kQ+gXLykQjQ7//nd
9EbtppXiSOuusbggGCbmUQrEprW93TAEkgxUcuUuQYiAwDp89s66Q0gcwo1qMtcx
mORfc+018/WJpBwFF904hBPPjgO08w==
=PfzM
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-next-140622-1' of https://github.com/stsquad/qemu into staging
Various testing fixes:
- fix compiler abi for test-armv6m-undef
- fix isns suffixes for i386 tcg tests
- fix gitlab cfi jobs
- fix makefile docker invocation
- don't enable xtensa-linux-user builds with system compiler
- fix CIRRUS_nn var checking
- don't spam the aarch64/32 runners with too many jobs at once
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmKnxfUACgkQ+9DbCVqe
# KkSksAf/eXGL/k0zUU4RmxmQGWatCPPfbdxWj/pRDJrZl4cvegYK4cqXcfblDkiJ
# f5kdB4FsSHgJUKic7K7sBSke2xgoi2bvBMeqNIknLo89b+xXZLJSzTE7XCi0W+hm
# ll3GtHNJMEPjrIhSIAsqiSMFloL5xi7uz+ylBAB49skGF6F3rkCMv4fl7TDFKqaH
# y5fRzLZMJg+FhlHNwGO0H8O32ZU7FlyqLGQT3JWZywR0n241kQ+gXLykQjQ7//nd
# 9EbtppXiSOuusbggGCbmUQrEprW93TAEkgxUcuUuQYiAwDp89s66Q0gcwo1qMtcx
# mORfc+018/WJpBwFF904hBPPjgO08w==
# =PfzM
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 13 Jun 2022 04:19:17 PM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-next-140622-1' of https://github.com/stsquad/qemu:
.gitlab: use less aggressive nproc on our aarch64/32 runners
gitlab: compare CIRRUS_nn vars against 'null' not ""
tests/tcg: disable xtensa-linux-user again
tests/docker: fix the IMAGE for build invocation
gitlab-ci: Fix the build-cfi-aarch64 and build-cfi-ppc64-s390x jobs
tests/tcg/i386: Use explicit suffix on fist insns
test/tcg/arm: Use -mfloat-abi=soft for test-armv6m-undef
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Running on all 80 cores of our aarch64 runner does occasionally
trigger a race condition which fails the build. However the CI system
is not the time and place to play with much heisenbugs so turn down
the nproc to "only" use 40 cores in the build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220613171258.1905715-8-alex.bennee@linaro.org>
The GitLab variable comparisons don't have shell like semantics where
an unset variable compares equal to empty string. We need to explicitly
test against 'null' to detect an unset variable.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220608160651.248781-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220613171258.1905715-7-alex.bennee@linaro.org>
The move from tests/tcg/configure.sh started enabling the container image
for xtensa-linux-user, which fails because the compiler does not have
the full set of headers. The cause is the "xtensa*-softmmu)" case
in tests/tcg/configure.sh which became just "xtensa*)" in the new
probe_target_compiler shell function. Look out for xtensa*-linux-user
and do not configure it.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220608135727.1341946-1-pbonzini@redhat.com>
Fixes: cd362defbb ("tests/tcg: merge configure.sh back into main configure script")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220613171258.1905715-6-alex.bennee@linaro.org>
We inadvertently broke the ability to run local builds when the code
was re-factored. The result was the run stanza failing to find the
docker image with it's qemu/ prefix.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: d39eaa2266 ("tests/docker: simplify docker-TEST@IMAGE targets")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220613171258.1905715-5-alex.bennee@linaro.org>
The job definitions recently got a second "variables:" section by
accident and thus are failing now if one tries to run them. Merge
the two sections into one again to fix the issue.
And while we're at it, bump the timeout here (70 minutes are currently
not enough for the aarch64 job). The jobs are marked as manual anyway,
so if the user starts them, they want to see their result for sure and
then it's annoying if the job timeouts too early.
Fixes: e312d1fdbb ("gitlab: convert build/container jobs to .base_job_template")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220603124809.70794-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220613171258.1905715-4-alex.bennee@linaro.org>
