Commit Graph

227 Commits

Author SHA1 Message Date
Peter Maydell
ff688cd2c7 hmp-commands.hx: List abbreviation after command for cont, quit, print
We have four HMP commands which have a single-character abbreviated
version: cont ('c'), quit ('q'), print ('p') and help ('h').  For
cont, quit and print, we list the abbreviation first in the help
documentation and the command name.  This has the odd effect that in
the full 'help' command list these commands end up sorted out of
alphabetical order (they end up after all the other commands that
start with the same letter).  As it happens, the only place this
currently changes the order is for 'cont'.

Abbreviation first is also not a very logical order, and it doesn't
match what we use for 'help' (which is 'help|?').  Put the full
command name first in both the help text and the .name field for
cont, quit and print.

Fixes: https://bugs.launchpad.net/qemu/+bug/1614609
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201121151711.20783-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Paolo Bonzini
ebe3444468 monitor: allow quitting while in preconfig state
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:57 -05:00
Zenghui Yu
8ad4e4519c pcie_aer: Fix help message of pcie_aer_inject_error command
There is an interesting typo in the help message of pcie_aer_inject_error
command. Use 'tlp' instead of 'tlb' to match the PCIe AER term.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201204030953.837-1-yuzenghui@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-09 13:04:17 -05:00
Marc-André Lureau
0d9b90ce5c console: make QMP/HMP screendump run in coroutine
Thanks to the monitors' coroutine support (merge commit b7092cda1b),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.

The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-04 08:02:25 +01:00
Kevin Wolf
eb94b81a94 block: Convert 'block_resize' to coroutine
block_resize performs some I/O that could potentially take quite some
time, so use it as an example for the new 'coroutine': true annotation
in the QAPI schema.

bdrv_truncate() requires that we're already in the right AioContext for
the BlockDriverState if called in coroutine context. So instead of just
taking the AioContext lock, move the QMP handler coroutine to the
context.

Call blk_unref() only after switching back because blk_unref() may only
be called in the main thread.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-15-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:20 +02:00
Pavel Dovgalyuk
f6baed3d14 replay: implement replay-seek command
This patch adds hmp/qmp commands replay_seek/replay-seek that proceed
the execution to the specified instruction count.
The command automatically loads nearest snapshot and replays the execution
to find the desired instruction count.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>

--

v4 changes:
 - fixed HMP command description indent
 - removed useless error_free call
Message-Id: <160174521180.12451.14033112911009278753.stgit@pasha-ThinkPad-X280>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Pavel Dovgalyuk
e751067179 replay: introduce breakpoint at the specified step
This patch introduces replay_break, replay_delete_break
qmp and hmp commands.
These commands allow stopping at the specified instruction.
It may be useful for debugging when there are some known
events that should be investigated.
replay_break command has one argument - number of instructions
executed since the start of the replay.
replay_delete_break removes previously set breakpoint.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>

--

v4 changes:
 - removed useless error_free call
Message-Id: <160174520606.12451.7056879546045599378.stgit@pasha-ThinkPad-X280>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Igor Mammedov
63e79833c4 cphp: remove deprecated cpu-add command(s)
These were deprecated since 4.0, remove both HMP and QMP variants.

Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29 02:14:30 -04:00
zhaolichang
e3a6e0daf4 qemu/: fix some comment spelling errors
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.

Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-17 20:35:43 +02:00
David Hildenbrand
2d9e3dd9be hmp: Make json format optional for qom-set
Commit 7d2ef6dcc1 ("hmp: Simplify qom-set") switched to the json
parser, making it possible to specify complex types. However, with this
change it is no longer possible to specify proper sizes (e.g., 2G, 128M),
turning the interface harder to use for properties that consume sizes.

Let's switch back to the previous handling and allow to specify passing
json via the "-j" parameter.

Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200610075153.33892-1-david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Dr. David Alan Gilbert
7d2ef6dcc1 hmp: Simplify qom-set
Simplify qom_set by making it use qmp_qom_set and the JSON parser.

(qemu) qom-get /machine smm
"auto"
(qemu) qom-set /machine smm "auto"

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-3-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  With 's'->'S' type change suggested by Paolo and Markus
2020-06-01 18:44:27 +01:00
Dr. David Alan Gilbert
89cf4fe34f hmp: Implement qom-get HMP command
This started off as Andreas Färber's implementation from
March 2015, but after feedback from Paolo and Markus it morphed into
using the json output which handles structs reasonably.

Use with qom-list to find the members of an object.

(qemu) qom-get /backend/console[0]/device/vga.rom[0] size
65536
(qemu) qom-get /machine smm
"auto"
(qemu) qom-get /machine rtc-time
{
    "tm_year": 120,
    "tm_sec": 51,
    "tm_hour": 9,
    "tm_min": 50,
    "tm_mon": 4,
    "tm_mday": 20
}
(qemu) qom-get /machine frob
Error: Property '.frob' not found

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200520151108.160598-2-dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-01 18:44:27 +01:00
Peter Maydell
3c95fdef94 Update comments in .hx files that mention Texinfo
Update the header comments in .hx files that mention STEXI/ETEXI
markup; this is now SRST/ERST as all these files have been
converted to rST.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
2020-03-12 11:14:05 +00:00
Thomas Huth
b4983c570c net: Remove deprecated [hub_id name] tuple of 'hostfwd_add' / 'hostfwd_remove'
It's been deprecated since QEMU v3.1.0. Time to finally remove it now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205104109.18680-1-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Reworked Thomas's deprecated.texi to the rst
2020-03-09 18:44:04 +00:00
Peter Maydell
29f9dff790 *.hx: Remove all the STEXI/ETEXI blocks
We no longer generate texinfo from the hxtool input files,
so delete all the STEXI/ETEXI blocks.

This commit was created using the following Perl one-liner:
  perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06 11:06:55 +00:00
Peter Maydell
a6b30bcae6 hmp-commands.hx: Add rST documentation fragments
Add the rST versions of the documentation fragments.  Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.

Since the only consumer of the hmp-commands hxtool documentation
is the HTML manual, all we need to do for the monitor command
documentation to appear in the Sphinx system manual is add the
one line that invokes the hxtool extension on the .hx file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-21-peter.maydell@linaro.org
2020-03-06 10:05:12 +00:00
Kevin Wolf
89b6fc4561 hmp: Allow using qdev ID for qemu-io command
In order to issue requests on an existing BlockBackend with the
'qemu-io' HMP command, allow specifying the BlockBackend not only with a
BlockBackend name, but also with a qdev ID/QOM path for a device that
owns the (possibly anonymous) BlockBackend.

Because qdev names could be conflicting with BlockBackend and node
names, introduce a -d option to explicitly address a device. If the
option is not given, a BlockBackend or a node is addressed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-19 18:04:25 +01:00
Kővágó, Zoltán
f0b9f36d71 audio: add audiodev property to vnc and wav_capture
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 8cbc9e865bbf40850c14340fc0549e6ac2d5fe9c.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 09:13:37 +02:00
Dr. David Alan Gilbert
c6644548c7 net/announce: Add HMP optional ID
Add the optional ID to the HMP command.

e.g.
   # start an announce for a long time on eth1
   migrate_set_parameter announce-rounds 1000
   announce_self "eth1" e1

   # start an announce on eth2
   announce_self "eth2" e2

   # Change e1 to be announcing on eth1 and eth3
   announce_self "eth1,eth3" e1

   # Cancel e1
   migrate_set_parameter announce-rounds 0
   announce_self "" e1

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02 10:21:07 +08:00
Dr. David Alan Gilbert
0852827115 net/announce: Add HMP optional interface list
Add the optional interface list to the HMP command.

i.e.

   All interfaces
        announce_self

   Just the named interfaces:
        announce_self vn1,vn2

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02 10:21:06 +08:00
Kevin Wolf
a0cd5e1c8e monitor: Rename HMP command type and tables
This renames the type for HMP monitor commands and the tables holding
the commands to make clear that they are related to HMP and to allow
making them public later:

* mon_cmd_t -> HMPCommand (fixing use of a reserved name, too)
* mon_cmds -> hmp_cmds
* info_cmds -> hmp_info_cmds

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[sortcmdlist() cleaned up to make checkpatch.pl happy]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17 20:36:56 +02:00
Dr. David Alan Gilbert
574d96933c hmp: gva2gpa debug command
Add a gva2gpa command purely for debug which performs
address translation on the gva, the existing gpa2hva
command can then also be used to find it in the qemu
userspace; e.g.

(qemu) info registers
.... RSP=ffffffff81c03e98
....
(qemu) gva2gpa 0xffffffff81c03e98
gpa: 0x1c03e98
(qemu) gpa2hva 0x1c03e98
Host virtual address for 0x1c03e98 (pc.ram) is 0x7f0599a03e98
(qemu) x/10x 0xffffffff81c03e98
ffffffff81c03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff
ffffffff81c03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000
ffffffff81c03eb8: 0x81c03ec8 0xffffffff

gdb -p ...qemu...
(gdb) x/10x 0x7f0599a03e98
0x7f0599a03e98:	0x81c03eb8	0xffffffff	0x8101ea3f	0xffffffff
0x7f0599a03ea8:	0x81d27b00	0xffffffff	0x00000000	0x00000000
0x7f0599a03eb8:	0x81c03ec8	0xffffffff

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190412152652.827-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-05-01 10:46:59 +01:00
Dr. David Alan Gilbert
544f6ea324 hmp: Add hmp_announce_self
Add an HMP command to trigger self annocements.
Unlike the QMP command (which takes a set of parameters), the HMP
command reuses the set of parameters used for migration.

Signend-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-03-05 11:27:41 +08:00
Daniel Henrique Barboza
6ca080453e block/snapshot.c: eliminate use of ID input in snapshot operations
At this moment, QEMU attempts to create/load/delete snapshots
by using either an ID (id_str) or a name. The problem is that the code
isn't consistent of whether the entered argument is an ID or a name,
causing unexpected behaviors.

For example, when creating snapshots via savevm <arg>, what happens is that
"arg" is treated as both name and id_str. In a guest without snapshots, create
a single snapshot via savevm:

(qemu) savevm 0
(qemu) info snapshots
List of snapshots present on all disks:
ID        TAG                 VM SIZE                DATE       VM CLOCK
--        0                      741M 2018-07-31 13:39:56   00:41:25.313

A snapshot with name "0" is created. ID is hidden from the user, but the
ID is a non-zero integer that starts at "1". Thus, this snapshot has
id_str=1, TAG="0". Creating a second snapshot with arg = 1, the first one
is deleted:

(qemu) savevm 1
(qemu) info snapshots
List of snapshots present on all disks:
ID        TAG                 VM SIZE                DATE       VM CLOCK
--        1                      741M 2018-07-31 13:42:14   00:41:55.252

What happened?

- when creating the second snapshot, a verification is done inside
bdrv_all_delete_snapshot to delete any existing snapshots that matches an
string argument. Here, the code calls bdrv_all_delete_snapshot("1", ...);

- bdrv_all_delete_snapshot calls bdrv_snapshot_find(..., "1") for each
BlockDriverState of the guest. And this is where things goes tilting:
bdrv_snapshot_find does a search by both id_str and name. It finds
out that there is a snapshot that has id_str = 1, stores a reference
to the snapshot in the sn_info pointer and then returns match found;

- since a match was found, a call to bdrv_snapshot_delete_by_id_or_name() is
made. This function ignores the pointer written by bdrv_snapshot_find. Instead,
it deletes the snapshot using bdrv_snapshot_delete() calling it first with
id_str = 1. If it fails to delete, then it calls it again with name = 1.

- after all that, QEMU creates the new snapshot, that has id_str = 1 and
name = 1. The user is left wondering that happened with the first snapshot
created. Similar bugs can be triggered when using loadvm and delvm.

Before contemplating discarding the use of ID input in these operations,
I've searched the code of what would be the implications. My findings
are:

- the RBD and Sheepdog drivers don't care. Both uses the 'name' field as
key in their logic, making id_str = name when appropriate.
replay-snapshot.c does not make any special use of id_str;

- qcow2 uses id_str as an unique identifier but it is automatically
calculated, not being influenced by user input. Other than that, there are
no distinguish operations made only with id_str;

- in blockdev.c, the delete operation uses a match of both id_str AND
name. Given that id_str is either a copy of 'name' or auto-generated,
we're fine here.

This gives motivation to not consider ID as a valid user input in HMP
commands - sticking with 'name' input only is more consistent. To
accomplish that, the following changes were made in this patch:

- bdrv_snapshot_find() does not match for id_str anymore, only 'name'. The
function is called in save_snapshot(), load_snapshot(), bdrv_all_delete_snapshot()
and bdrv_all_find_snapshot(). This change makes the search function more
predictable and does not change the behavior of any underlying code that uses
these affected functions, which are related to HMP (which is fine) and the
main loop inside vl.c (which doesn't care about it anyways);

- bdrv_all_delete_snapshot() does not call bdrv_snapshot_delete_by_id_or_name
anymore. Instead, it uses the pointer returned by bdrv_snapshot_find to
erase the snapshot with the exact match of id_str an name. This function
is called in save_snapshot and hmp_delvm, thus this change  produces the
intended effect;

- documentation changes to reflect the new behavior. I consider this to
be an API fix instead of an API change - the user was already creating
snapshots using 'name', but now he/she will also enjoy a consistent
behavior.

Ideally we would get rid of the id_str field entirely, but this would have
repercussions on existing snapshots. Another day perhaps.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-25 15:03:18 +01:00
Kashyap Chamarthy
e25701b730 Deprecate HMP cpu-add
Since we're deprecating the QMP `cpu-add`, let's deprecate its HMP
equivalent, too.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20181030123526.26415-3-kchamart@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11 15:45:22 -02:00
Emilio G. Cota
dd12e1bbf2 hmp-commands: add sync-profile
The command introduced here is just for developers. This means that:

- the interface implemented here could change in the future
- the command is only meant to be used from HMP, not from QMP

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Kevin Wolf
b24ec3c462 block: Remove deprecated -drive geometry options
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.

hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-08-15 12:50:39 +02:00
Cornelia Huck
6703db131f Revert "block: Remove deprecated -drive geometry options"
This reverts commit a7aff6dd10.

Hold off removing this for one more QEMU release (current libvirt
release still uses it.)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:12 +02:00
Viktor Prutyanov
2da91b54fe dump: add Windows dump format to dump-guest-memory
This patch adds Windows crashdumping feature. Now QEMU can produce ELF-dump
containing Windows crashdump header, which can help to convert to a valid
WinDbg-understandable crashdump file, or immediately create such file.
The crashdump will be obtained by joining physical memory dump and 8K header
exposed through vmcoreinfo/fw_cfg device by guest driver at BSOD time. Option
'-w' was added to dump-guest-memory command. At the moment, only x64
configuration is supported.
Suitable driver can be found at
https://github.com/virtio-win/kvm-guest-drivers-windows/tree/master/fwcfg64

Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180517162342.4330-2-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-29 13:02:48 +02:00
Dr. David Alan Gilbert
8e8581e6b1 hmp: add exit_preconfig
Add the exit_preconfig command to return to normality.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20180620153947.30834-7-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21 13:18:05 +01:00
Dr. David Alan Gilbert
8c7c7ecbb1 hmp: Add commands for preconfig
Allow a bunch of the info commands to be used in preconfig.

version, chardev, name, uuid,memdev, iothreads
  Were enabled in QMP in the previous patch from Igor

status, hotpluggable_cpus
  Was enabled in the original allow-preconfig series

history
  is HMP specific

qom-tree
  Don't have a QMP equivalent

Also enable the qom commands qom-list and qom-set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180620153947.30834-6-dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Dropped info numa as per Igor's 2018-06-21 review
2018-06-21 13:16:48 +01:00
Dr. David Alan Gilbert
31785f1b03 hmp: Allow help on preconfig commands
Allow the 'help' command in preconfig state but
make it only list the preconfig commands.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20180620153947.30834-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21 12:48:54 +01:00
Suraj Jitindar Singh
65fa57b09b hmp-commands: use long for begin and length in dump-guest-memory
The dump-guest-memory command is used to dump an area of guest memory
to a file, the piece of memory is specified by a begin address and
a length. These parameters are specified as ints and thus have a maximum
value of 4GB. This means you can't dump the guest memory past the first
4GB and instead get:
(qemu) dump-guest-memory tmp 0x100000000 0x100000000
'dump-guest-memory' has failed: integer is for 32-bit values
Try "help dump-guest-memory" for more information

This limitation is imposed in monitor_parse_arguments() since they are
both ints. hmp_dump_guest_memory() uses 64 bit quantities to store both
the begin and length values. Thus specify begin and length as long so
that the entire guest memory space can be dumped.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20180620003202.10546-1-sjitindarsingh@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-21 12:45:05 +01:00
Kevin Wolf
a7aff6dd10 block: Remove deprecated -drive geometry options
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.

hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-06-15 14:49:44 +02:00
Peter Xu
d37297dc66 migration/hmp: add migrate_pause command
Wrapper for QMP command "migrate-pause".

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-25-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-15 22:13:08 +02:00
Peter Xu
3b563c4be0 hmp/migration: add migrate_recover command
Sister command to migrate-recover in QMP.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-22-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-05-15 22:12:41 +02:00
Peter Xu
7a4da28b26 qmp: hmp: add migrate "resume" option
It will be used when we want to resume one paused migration.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-8-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
2018-05-15 20:54:49 +02:00
Alberto Garcia
83592184d8 hmp: Allow using a qdev id in block_set_io_throttle
The QMP version of this command can take a qdev ID since 7a9877a026,
but the HMP version is still using the deprecated block device name so
there's no way to refer to a block device added like this:

  -blockdev node-name=disk0,driver=qcow2,file.driver=file,file.filename=hd.qcow2
  -device virtio-blk-pci,id=virtio-blk-pci0,drive=disk0

This patch works around this problem by using the specified name as a
qdev ID if the block device name is not found.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-15 16:11:41 +02:00
Liang Li
b76e4458b1 block/mirror: change the semantic of 'force' of block-job-cancel
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.

Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync.  However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration.  Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.

The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused.  However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:39 +01:00
Thomas Huth
f771c5440e qapi: Add device ID and head parameters to screendump
QEMU's screendump command can only take dumps from the primary display.
When using multiple VGA cards, there is no way to get a dump from a
secondary card or other display heads yet. So let's add a 'device' and
a 'head' parameter to the HMP and QMP commands to be able to specify
alternative devices and heads with the screendump command, too.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1520267868-31778-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-03-12 09:03:15 +01:00
Thomas Huth
7cc28cb061 net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands
They are deprecated since QEMU v2.10, and so far nobody complained that
these commands are still necessary for any reason - and since you can use
'netdev_add' and 'netdev_remove' instead, there also should not be any
real reason. Since they are also standing in the way for the upcoming
'vlan' clean-up, it's now time to remove them.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05 10:30:15 +08:00
Greg Kurz
c2eb7f213a migration: improve documentation of postcopy-ram
This capability must have the same value on both source and destination,
otherwise migration fails (commit 875fcd013a "migration: incoming
postcopy advise sanity checks").

Let's write it down in various places where postcopy-ram is documented.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <151801810352.29167.4832480228518630626.stgit@bahia.lan>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-14 10:23:15 +00:00
Peter Maydell
0d1442912b -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJabtfbAAoJEO8Ells5jWIROgUH/2SeXD7Du1w0Ry5Bc7uKBR51
 jGm+324jfT5mqajlWQ5rGMTEUHLGX8H4s05FT3/gTl0xTea5rSrUTeW+7RgJaE+N
 pOaF0vEhms3sg9rZoF84XlkKjKKsZvAFcK4QRrp4Jc1djQQmOc7d+7wbiGFN5+Ii
 OCzq3V4hhVhyFvpasP92aIxdvmz4yW1Vng35njVLm7xTyblMm4mQ/S6qH+/j5UXT
 8vEheABU5nt9XTMJO8FaeFe2XzsXgV9ng5NiwR7aPLdghRFffSKUsxTsDJ061BIJ
 PbJh/XpELIgsscK6SpEhACeV2gcr2qYbqXS94kWNXziEYdl+oU7ZYLEEMdQIKeE=
 =sd76
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Mon 29 Jan 2018 08:14:19 GMT
# gpg:                using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  MAINTAINERS: update Dmitry Fleytman email
  qemu-doc: Get rid of "vlan=X" example in the documentation
  net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'
  net: Allow hubports to connect to other netdevs
  colo: compare the packet based on the tcp sequence number
  colo: modified the payload compare function

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29 14:29:17 +00:00
Thomas Huth
9365306644 net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'
It does not make much sense to limit these commands to the legacy 'vlan'
concept only, they should work with the modern netdevs, too. So now
it is possible to use this command with one, two or three parameters.

With one parameter, the command installs a hostfwd rule on the default
"user" network:
    hostfwd_add tcp:...

With two parameters, the command installs a hostfwd rule on a netdev
(that's the new way of using this command):
    hostfwd_add netdev_id tcp:...

With three parameters, the command installs a rule on a 'vlan' (aka hub):
    hostfwd_add hub_id name tcp:...

Same applies to the hostfwd_remove command now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-01-29 16:05:37 +08:00
Eric Blake
08fb10a729 hmp: Add nbd_server_remove to mirror QMP command
Since everything else about the nbd-server-* QMP commands is
accessible from HMP, we might as well make removing an export
available as well.  For now, I went with a bool flag rather
than a mode string for choosing between safe (default) and
hard modes.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180125144557.25502-1-eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-01-26 09:56:12 -06:00
Eric Blake
dba49323ea hmp: Add name parameter to nbd_server_add
Extend the flexibility of the previous QMP patch to also work
in HMP.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180109192802.17167-1-eblake@redhat.com>
2018-01-26 09:37:20 -06:00
Thomas Huth
81950da681 hmp-commands: Remove the deprecated usb_add and usb_del
It's easy to use device_add and device_del as replacement instead.
The usb_add and usb_del commands are deprecated since QEMU 2.10,
and nobody complained that they are still needed, so let's get rid
of them now to make the HMP interface a little bit less overloaded.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-12-14 10:16:52 +00:00
Dr. David Alan Gilbert
94ae12cba4 migrate: HMP migate_continue
HMP equivalent to the just added migrate-continue
Unpause a migrate paused at a given state.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23 18:03:31 +02:00
Peter Maydell
fbc8ea1ed0 s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
 - migration of storage attributes like the CMMA used/unused state
 - PCI related enhancements - full support for aen, ais and zpci
 - migration support for css with vmstates (Halil Pasic)
 - cpu model enhancements for cpu features
 - guarded storage support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJZaJ3gAAoJEBF7vIC1phx8VSAP/1zKh7ti4Y2dIVb94c1tvECE
 LRNdCdAPhEqL6zybty85aG04sjAmSu50NGfo5t8AGq1U9WBWrCy7/wWSFdK2GI63
 Umc1fR7aBF9FiFayKONhExaREh6gSWVHZF1RyaPIWnnjRIeX8nqgPEnpdZNiVVrG
 5cKHV2SUd5pMDJUiQdZGZgbgG1c+MWJx2BHoduM+K0UnmFjpyLCL4Rq58Q2Q87Nj
 /+yPSVApFFeMsDpem6DNttE6Msa+V+K+EmRhRKqZNOWrdRKH5vvj6Fl/LSxVtd9c
 CEG+aZGjFd693uP9ge0WmjeUJtVHIGt9xKdeU0d7FijZWehjsIqalLoqapzK8ddF
 h6HJuNsmk/SZF7O9JsbHT3Epyr+7Hk0dx78Ku1GNQuUxtFL93eyIJmRdgz7Zo3Lj
 ZTPJvCA13GjPWtgzG5dG3JH1hiAS+Yai18BgdzGbs+qfMCwPdbWkoqg7sARwAJNe
 50fo/ayJvcmHJnSNO6hErFoU38WctGgO8fWp+oVvD8Um1ny1aBFFuJgJIMf47nhu
 x1IdA6UGrNN0yNC4/UgyYBDV1hfvo/phMdoHqle9AcMmPYOD1DBr0genK/bYbICk
 Dio7og9nKgheLRBHz2u5TuYcCsfE/7rtwZX+iXMvoC7VE7Dqs+Q7Zjwwwtwj4x9F
 FwWuf/Bv1s6IkVLlP8Ow
 =2bOV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging

s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups

- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support

# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg:                using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB  FBCA 117B BC80 B5A6 1C7C

* remotes/borntraeger/tags/s390x-20170714: (40 commits)
  s390x/gdb: add gs registers
  s390x/arch_dump: also dump guarded storage control block
  s390x/kvm: enable guarded storage
  s390x/kvm: Enable KSS facility for nested virtualization
  s390x/cpumodel: add esop/esop2 to z12 model
  s390x/cpumodel: we are always in zarchitecture mode
  s390x/cpumodel: wire up new hardware features
  s390x/flic: migrate ais states
  s390x/cpumodel: add zpci, aen and ais facilities
  s390x: initialize cpu firstly
  pc-bios/s390: rebuild s390-ccw.img
  pc-bios/s390: add s390-netboot.img
  pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
  pc-bios/s390-ccw: Add virtio-net driver code
  pc-bios/s390-ccw: Add core files for the network bootloading program
  roms/SLOF: Update submodule to latest status
  pc-bios/s390-ccw: Add code for virtio feature negotiation
  pc-bios/s390-ccw: Remove unused structs from virtio.h
  pc-bios/s390-ccw: Move byteswap functions to a separate header
  pc-bios/s390-ccw: Add a write() function for stdio
  ...

Conflicts:
	target/s390x/kvm.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 14:19:35 +01:00
Claudio Imbrenda
f860d49753 s390x/migration: Monitor commands for storage attributes
Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00