Move to meson the code to detect the presence of accelerators, and
to define accelerator-specific config-target.h symbols.
The logic for now is duplicated in configure because it is still
in use to build the list of targets (which is in turn used to
create the config-target.mak files). The next patches remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare to process "auto" in meson rather than configure: standardize the
shape of the code that changes "auto" to enabled/disabled, to ease the review
when it will be moved to meson.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for moving the tests to meson. For now they only have
enabled/disabled as the possible values when meson is invoked,
but "auto" will be a possibility later, when configure will only
parse the command line options.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make room for target files in default-configs/targets/
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCI is already covered on gitlab CI, so we can remove it.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is always possible to tell the length of an insn, even if the
actual insn is unknown. Skip the correct number of bytes, so that
we stay in sync with the instruction stream.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enable s390x, aka SYSZ, in the git submodule build.
Set the capstone parameters for both s390x host and guest.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target-specific about this code, so it
can be added to common_ss. This also requires that the
base capstone dependency be added to common_ss, so that
we get the correct include paths added to CFLAGS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ifdef tangle failed to set cap_arch if libvixl itself
was not configured (e.g. due to lack of c++ compiler).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not retain a GString in thread-local storage. Allocate a
new one and free it on every invocation. Do not g_strdup the
result; return the buffer from the GString. Do not use
warn_report.
Using cs_disasm allocated memory via the &insn parameter, but
that was never freed. Use cs_disasm_iter so that we use the
memory that we've already allocated, and so that we only try
to disassemble one insn, as desired. Do not allocate 1k to
hold the bytes for a single instruction.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the routines we have already instead of open-coding.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename several functions, dropping "generic" and making "host"
vs "target" clearer. Make a bunch of functions static that are
not used outside this file. Replace INIT_DISASSEMBLE_INFO with
a trio of functions.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of creating GStrings and passing them into log_disas,
just print the annotations directly in tb_gen_code.
Fix the annotations for the slow paths of the TB, after the
part implementing the final guest instruction.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to use a portion of the 4.0 API.
Reject a system library version prior to that.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This branch contains a number of improvements over master,
including making all of the disassembler data constant.
We are skipping past the 4.0 branchpoint, which changed
the location of the includes within the source directory.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are better ways to do this, e.g. meson cmake subproject,
but that requires cmake 3.7 and some of our CI environments
only provide cmake 3.5.
Nor can we add a meson.build file to capstone/, because the git
submodule would then always report "untracked files". Fixing that
would require creating our own branch on the qemu git mirror, at
which point we could just as easily create a native meson subproject.
Instead, build the library via the main meson.build.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libcapstone.a, which we wouldn't
do before-hand. In addition, the use of the configuration header file
instead of command-line -DEFINES means that we will rebuild the
capstone objects with changes to meson.build.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We overlooked these in 02b1ecfa10
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200928162333.14998-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5f479a8d renamed the 'device' option of --export into
'node-name', but forgot to update the help in qemu-storage-daemon.
Fixes: 5f479a8dc086bfa42c9f94e9ab69962f256e207f
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200930133909.58820-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-32-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is useful for specifying 'generic' as supported (which includes
only writable image formats), but still excluding some incompatible
writable formats.
It also removes more lines than it adds.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-31-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function to list the NBD exports offered by an NBD server.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-30-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have three almost identical functions that call an external process
and return its output and return code. Refactor them into small wrappers
around a common function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-29-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These QMP commands are replaced by block-export-add/del.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-28-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no real reason any more why nbd_export_new() and
nbd_export_create() should be separate functions. The latter only
performs a few checks before it calls the former.
What makes the current state stand out is that it's the only function in
BlockExportDriver that is not a static function inside nbd/server.c, but
a small wrapper in blockdev-nbd.c that then calls back into nbd/server.c
for the real functionality.
Move all the checks to nbd/server.c and make the resulting function
static to improve readability.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-27-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'writable' option is a basic option that will probably be applicable
to most if not all export types that we will implement. Move it from NBD
to the generic BlockExport layer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-26-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a simple QMP command to query the list of block exports.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-25-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every export type will need a BlockBackend, so creating it centrally in
blk_exp_add() instead of the .create driver callback avoids duplication.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-24-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every block export has a BlockBackend representing the disk that is
exported. It should live in BlockExport therefore.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-23-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clients may want to know when an export has finally disappeard
(block-export-del returns earlier than that in the general case), so add
a QAPI event for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-22-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implement a new QMP command block-export-del and make nbd-server-remove
a wrapper around it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The reference owned by the user/monitor that is created when adding the
export and dropped when removing it was tied to the 'exports' list in
nbd/server.c. Every block export will have a user reference, so move it
to the block export level and tie it to the 'block_exports' list in
block/export/export.c instead. This is necessary for introducing a QMP
command for removing exports.
Note that exports are present in block_exports even after the user has
requested shutdown. This is different from NBD's exports where exports
are immediately removed on a shutdown request, even if they are still in
the process of shutting down. In order to avoid that the user still
interacts with an export that is shutting down (and possibly removes it
a second time), we need to remember if the user actually still owns it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-20-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll need an id to identify block exports in monitor commands. This
adds one.
Note that this is different from the 'name' option in the NBD server,
which is the externally visible export name. While block export ids need
to be unique in the whole process, export names must be unique only for
the same server. Different export types or (potentially in the future)
multiple NBD servers can have the same export name externally, but still
need different block export ids internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a function to shut down all block exports, and another one to
shut down the block exports of a single type. The latter is used for now
when stopping the NBD server. As soon as we implement support for
multiple NBD servers, we'll need a per-server list of exports and it
will be replaced by a function using that.
As a side effect, the BlockExport layer has a list tracking all existing
exports now. closed_exports loses its only user and can go away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-18-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of letting the driver allocate and return the BlockExport
object, allocate it already in blk_exp_add() and pass it. This allows us
to initialise the generic part before calling into the driver so that
the driver can just use these values instead of having to parse the
options a second time.
For symmetry, move freeing the BlockExport to blk_exp_unref().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-17-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every block export needs a block node to export, so add a 'node-name'
option to BlockExportOptions and remove the replaced option 'device'
from BlockExportOptionsNbd.
To maintain compatibility in nbd-server-add, BlockExportOptionsNbd needs
to be wrapped by a new type NbdServerAddOptions that adds 'device' back
because nbd-server-add doesn't use the BlockExportOptions base type at
all (so even without changing it to a 'node-name' option in
block-export-add, this compatibility code would be necessary).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-16-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-15-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Having a refcount makes sense for all types of block exports. It is also
a prerequisite for keeping a list of all exports at the BlockExport
level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-14-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Closing export is somewhat convoluted because nbd_export_close() and
nbd_export_put() call each other and the ways they actually end up being
nested is not necessarily obvious.
However, it is not really necessary to call nbd_export_close() from
nbd_export_put() when putting the last reference because it only does
three things:
1. Close all clients. We're going to refcount 0 and all clients hold a
reference, so we know there is no active client any more.
2. Close the user reference (represented by exp->name being non-NULL).
The same argument applies: If the export were still named, we would
still have a reference.
3. Freeing exp->description. This is really cleanup work to be done when
the export is finally freed. There is no reason to already clear it
while clients are still in the process of shutting down.
So after moving the cleanup of exp->description, the code can be
simplified so that only nbd_export_close() calls nbd_export_put(), but
never the other way around.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-13-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With this change, NBD exports are now only created through the
BlockExport interface. This allows us finally to move things from the
NBD layer to the BlockExport layer if they make sense for other export
types, too.
blk_exp_add() returns only a weak reference, so the explicit
nbd_export_put() goes away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-12-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The export close callback is unused by the built-in NBD server. qemu-nbd
uses it only during shutdown to wait for the unrefed export to actually
go away. It can just use nbd_export_close_all() instead and do without
the callback.
This removes the close callback from nbd_export_new() and makes both
callers of it more similar.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-11-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-nbd allows use of writethrough cache modes, which mean that write
requests made through NBD will cause a flush before they complete.
Expose the same functionality in block-export-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-10-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a QMP equivalent of qemu-nbd's --shared option, limiting the
maximum number of clients that can attach at the same time.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-9-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd-server-add tries to be convenient and adds two questionable
features that we don't want to share in block-export-add, even for NBD
exports:
1. When requesting a writable export of a read-only device, the export
is silently downgraded to read-only. This should be an error in the
context of block-export-add.
2. When using a BlockBackend name, unplugging the device from the guest
will automatically stop the NBD server, too. This may sometimes be
what you want, but it could also be very surprising. Let's keep
things explicit with block-export-add. If the user wants to stop the
export, they should tell us so.
Move these things into the nbd-server-add QMP command handler so that
they apply only there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of implementing qemu-nbd --offset in the NBD code, just put a
raw block node with the requested offset on top of the user image and
rely on that doing the job.
This does not only simplify the nbd_export_new() interface and bring it
closer to the set of options that the nbd-server-add QMP command offers,
but in fact it also eliminates a potential source for bugs in the NBD
code which previously had to add the offset manually in all relevant
places.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-7-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No reason to duplicate the functionality locally, we can now just reuse
the QMP command block-export-add for --export.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-6-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to have a common set of commands for all types of block exports.
Currently, this is only NBD, but we're going to add more types.
This patch adds the basic BlockExport and BlockExportDriver structs and
a QMP command block-export-add that creates a new export based on the
given BlockExportOptions.
qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-5-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The name BlockExport will be used for the struct containing the runtime
state of block exports, so change the name of export creation options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-4-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move all block export related types and commands from block-core to the
new QAPI module block-export.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-3-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-2-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini
Richard Henderson
Peter Maydell
Alberto Garcia
Kevin Wolf