The current code assumes that we don't need to exit the TB
if a Data Cache Flush or Insert has happend. However, as we
have a shared Data/Instruction TLB, a Data cache flush also
flushes Instruction TLB entries, and a Data cache TLB insert
might also evict a Instruction TLB entry.
So exit the TB in all cases if Instruction translation is enabled.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-11-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-10-svens@stackframe.org>
[rth: Add required tlb flushing when prot id registers change.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ODE software calls itlbp on existing TLB entries without
calling itlba first, so this seems to be valid.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-9-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
b,gate does GR[t] ← cat(GR[t]{0..29},IAOQ_Front{30..31});
instead of saving the link address to register t.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-8-svens@stackframe.org>
[rth: Move link check outside of ifndef CONFIG_USER_ONLY;
use ctx->privilege; nullify the insn earlier.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
DIAG is usually only used by diagnostics software as it's CPU
specific. In most of the cases it's better to ignore it and log
a message that it's not implemented.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-7-svens@stackframe.org>
[rth: Free the nullify condition.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
HP ODE use rfi to set the Q bit, and i don't see anything in the
documentation that this is forbidden. So remove it.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-6-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To ease TLB debugging add a few trace events, which are disabled
by default so that there's no performance impact.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-5-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-4-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Assume the following sequence:
pitlbe r0(sr0,r0)
iitlba r4,(sr0,r0)
ldil L%3000000,r5
iitlbp r5,(sr0,r0)
This will purge the whole TLB and add an entry for page 0. However
the current TLB implementation in helper_iitlba() will store to
the last empty TLB entry, while helper_iitlbp() will write to the
first empty entry. That is because an empty entry will match address
0 in helper_iitlba()
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-3-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When one of the source registers is the same as the destination register,
the source register gets overwritten with the destionation value before
do_add_sv() is called, which leads to unexpection condition matches.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-2-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We got away with eliding this check when target/hppa was user-only,
but missed adding this check when adding system support.
Fixes an early crash in the HP-UX 11 installer.
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already use (we didn't notice it) IN_USE flag for marking bitmap
metadata outdated, such as AUTO flag, which mirrors enabled/disabled
bitmaps. Now we are going to support bitmap resize, so it's good to
write IN_USE meaning with more details.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190311185147.52309-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Commit a88b179f introduced the ability to set and query bitmap
persistence, but with an atypical spelling.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20190308205845.25734-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Set the inconsistent bit on load instead of rejecting such bitmaps.
There is no way to un-set it; the only option is to delete the bitmap.
Obvervations:
- bitmap loading does not need to update the header for in_use bitmaps.
- inconsistent bitmaps don't need to have their data loaded; they're
glorified corruption sentinels.
- bitmap saving does not need to save inconsistent bitmaps back to disk.
- bitmap reopening DOES need to drop the readonly flag from inconsistent
bitmaps to allow reopening of qcow2 files with non-qemu-owned bitmaps
being eventually flushed back to disk.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190301191545.8728-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We didn't do any state checking on source bitmaps at all,
so this adds inconsistent and busy checks. readonly is
allowed, so you can still copy a readonly bitmap to a new
destination to use it for operations like drive-backup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Remove is an inherently RW operation, so this will fail anyway, but
we can fail it very quickly instead of trying and failing, so do so.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
drive and blockdev backup cannot use readonly bitmaps, because the
sync=incremental mechanism actually edits the bitmaps on success.
If you really want to do this operation, use a copied bitmap.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of checking against busy, inconsistent, or read only directly,
use a check function with permissions bits that let us streamline the
checks without reproducing them in many places.
Included in this patch are permissions changes that simply add the
inconsistent check to existing permissions call spots, without
addressing existing bugs.
In general, this means that busy+readonly checks become BDRV_BITMAP_DEFAULT,
which checks against all three conditions. busy-only checks become
BDRV_BITMAP_ALLOW_RO.
Notably, remove allows inconsistent bitmaps, so it doesn't follow the pattern.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Even though the status field is deprecated, we still have to support
it for a few more releases. Since this is a very new kind of bitmap
state, it makes sense for it to have its own status field.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add an inconsistent bit to dirty-bitmaps that allows us to report a bitmap as
persistent but potentially inconsistent, i.e. if we find bitmaps on a qcow2
that have been marked as "in use".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds a simple test that ensures the busy bit works for push backups,
as well as doubling as bonus test for incremental backups that get interrupted
by EIO errors.
Recording bit tests are already handled sufficiently by 236.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20190223000614.13894-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This field isn't present anymore.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Simply move the big status enum comment block to above the status
function, and document it as being deprecated. The whole confusing
block can get deleted in three releases time.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These mean the same thing now. Unify them and rename the merged call
bdrv_dirty_bitmap_busy to indicate semantically what we are describing,
as well as help disambiguate from the various _locked and _unlocked
versions of bitmap helpers that refer to mutex locks.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of implying a user_locked/busy status, make it explicit.
Now, bitmaps in use by migration, NBD or backup operations
are all treated the same way with the same code paths.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Check that the bitmap is not in use prior to it checking if it is
not enabled/recording guest writes. The bitmap being busy was likely
at the behest of the user, so this error has a greater chance of being
understood by the user.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Currently, the enabled predicate means something like:
"the QAPI status of the bitmap is ACTIVE."
After this patch, it should mean exclusively:
"This bitmap is recording guest writes, and is allowed to do so."
In many places, this is how this predicate was already used.
Internal usages of the bitmap QPI can call user_locked to find out if
the bitmap is in use by an operation.
To accommodate this, modify the create_successor routine to now
explicitly disable the parent bitmap at creation time.
Justifications:
1. bdrv_dirty_bitmap_status suffers no change from the lack of
1:1 parity with the new predicates because of the order in which
the predicates are checked. This is now only for compatibility.
2. bdrv_set_dirty() is unchanged: pre-patch, it was skipping bitmaps that were
disabled or had a successor, while post-patch it is only skipping bitmaps
that are disabled. To accommodate this, create_successor now ensures that
any bitmap with a successor is explicitly disabled.
3. qcow2_store_persistent_dirty_bitmaps: No functional change. This function
cares only about the literal enabled bit, and makes no effort to check if
the bitmap is in-use or not. After this patch there are still no ways to
produce an enabled bitmap with a successor.
4. block_dirty_bitmap_enable_prepare
block_dirty_bitmap_disable_prepare
init_dirty_bitmap_migration
nbd_export_new
These functions care about the literal enabled bit,
and already check user_locked separately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
bdrv_set_dirty_bitmap and bdrv_reset_dirty_bitmap are only used as an
internal API by the mirror and migration areas of our code. These
calls modify the bitmap, but do so at the behest of QEMU and not the
guest.
Presently, these bitmaps are always "enabled" anyway, but there's no
reason they have to be.
Modify these internal APIs to drop this assertion.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
"Frozen" was a good description a long time ago, but it isn't adequate now.
Rename the frozen predicate to has_successor to make the semantics of the
predicate more clear to outside callers.
In the process, remove some calls to frozen() that no longer semantically
make sense. For bdrv_enable_dirty_bitmap_locked and
bdrv_disable_dirty_bitmap_locked, it doesn't make sense to prohibit QEMU
internals from performing this action when we only wished to prohibit QMP
users from issuing these commands. All of the QMP API commands for bitmap
manipulation already check against user_locked() to prohibit these actions.
Several other assertions really want to check that the bitmap isn't in-use
by another operation -- use the bitmap_user_locked function for this instead,
which presently also checks for has_successor. This leaves some redundant
checks of has_successor through different helpers that are addressed in
forthcoming patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The current API allows us to report a single status, which we've defined as:
Frozen: has a successor, treated as qmp_locked, may or may not be enabled.
Locked: no successor, qmp_locked. may or may not be enabled.
Disabled: Not frozen or locked, disabled.
Active: Not frozen, locked, or disabled.
The problem is that both "Frozen" and "Locked" mean nearly the same thing,
and that both of them do not intuit whether they are recording guest writes
or not.
This patch deprecates that status field and introduces two orthogonal
properties instead to replace it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Fixes the following failure with --enable-debug:
/tmp/qemu-test/src/tests/test-char.c:838:10: runtime error: load of value 40, which is not a valid value for type bool
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior /tmp/qemu-test/src/tests/test-char.c:838:10 in
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The glfs_*_async() functions do a callback once finished. This callback
has changed its arguments, pre- and post-stat structures have been
added. This makes it possible to improve caching, which is useful for
Samba and NFS-Ganesha, but not so much for QEMU. Gluster 6 is the first
release that includes these new arguments.
With an additional detection in ./configure, the new arguments can
conditionally get included in the glfs_io_cbk handler.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New versions of Glusters libgfapi.so have an updated glfs_ftruncate()
function that returns additional 'struct stat' structures to enable
advanced caching of attributes. This is useful for file servers, not so
much for QEMU. Nevertheless, the API has changed and needs to be
adopted.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This pull requests supersedes ppc-for-4.0-20190310. Changes are:
* Fixed a bunch of minor style problems
* Suppressed warnings about Spectre/Meltdown mitigations with TCG
* Added one more patch, a preliminary fix towards the not-quite-ready
support for NVLink VFIO passthrough.
This is a final pull request before the 4.0 soft freeze. Changes
include:
* A Great Renaming to use camel case properly in spapr code
* Optimization of some vector instructions
* Support for POWER9 cpus in the powernv machine
* Fixes a regression from the last pull request in handling VSX
instructions with mixed operands from the FPR and VMX parts of the
register array
* Optimization hack to avoid scanning all the (empty) entries on a
new IOMMU window
* Add FSL I2C controller model for E500
* Support for KVM acceleration of the H_PAGE_INIT hypercall on spapr
* Update u-boot image for E500
* Enable Specre/Meltdown mitigations by default on the new machine type
* Enable large decrementer support for POWER9
-----BEGIN PGP SIGNATURE-----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=f+No
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190312' into staging
ppc patch queue for 2019-03-10
This pull requests supersedes ppc-for-4.0-20190310. Changes are:
* Fixed a bunch of minor style problems
* Suppressed warnings about Spectre/Meltdown mitigations with TCG
* Added one more patch, a preliminary fix towards the not-quite-ready
support for NVLink VFIO passthrough.
This is a final pull request before the 4.0 soft freeze. Changes
include:
* A Great Renaming to use camel case properly in spapr code
* Optimization of some vector instructions
* Support for POWER9 cpus in the powernv machine
* Fixes a regression from the last pull request in handling VSX
instructions with mixed operands from the FPR and VMX parts of the
register array
* Optimization hack to avoid scanning all the (empty) entries on a
new IOMMU window
* Add FSL I2C controller model for E500
* Support for KVM acceleration of the H_PAGE_INIT hypercall on spapr
* Update u-boot image for E500
* Enable Specre/Meltdown mitigations by default on the new machine type
* Enable large decrementer support for POWER9
# gpg: Signature made Tue 12 Mar 2019 08:14:51 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.0-20190312: (62 commits)
vfio: Make vfio_get_region_info_cap public
Suppress test warnings about missing Spectre/Meltdown mitigations with TCG
spapr: Use CamelCase properly
target/ppc: Optimize x[sv]xsigdp using deposit_i64()
target/ppc: Optimize xviexpdp() using deposit_i64()
target/ppc: add HV support for POWER9
ppc/pnv: add a "ibm,opal/power-mgt" device tree node on POWER9
ppc/pnv: add more dummy XSCOM addresses
ppc/pnv: activate XSCOM tests for POWER9
ppc/pnv: POWER9 XSCOM quad support
ppc/pnv: extend XSCOM core support for POWER9
ppc/pnv: add a OCC model for POWER9
ppc/pnv: add a OCC model class
ppc/pnv: add SerIRQ routing registers
ppc/pnv: add a LPC Controller model for POWER9
ppc/pnv: add a 'dt_isa_nodename' to the chip
ppc/pnv: add a LPC Controller class model
ppc/pnv: lpc: fix OPB address ranges
ppc/pnv: add a PSI bridge model for POWER9
ppc/pnv: add a PSI bridge class model
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I'm the sole author (aside from a one line by Greg fixing encoding)
and I was asked nicely on IRC to bring it into line with the rest of
the files.
Cc: Greg Kurz <groug@kaod.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some machines have an SDHCI device, but no PCI. To be able to
compile hw/sd/sdhci.c without CONFIG_PCI, we must not call functions
like pci_get_address_space() and pci_allocate_irq() there. Thus
move the PCI-related code into a separate file.
This is required for the new Kconfig-like build system, e.g. it is
needed if a user wants to compile a QEMU binary with just one machine
that has SDHCI, but no PCI, like the ARM "raspi" machines for example.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Managing parallel connections to two different monitors via
the implicit global_qtest makes it hard to copy-and-paste code
to tests that are not aware of the implicit state; the
management of global_qtest is even harder to follow because
it was masked behind set_context().
Instead, explicitly pass QTestState* around (generally, by
reusing the member already present in ahci->parent QOSState),
and call explicit qtest_* functions on all places that
interact with a monitor.
We can assert that the conversion is correct by checking that
global_qtest remains NULL throughout the test (a later patch
that changes global_qtest to not be a public global variable
will drop the assertions).
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
[thuth: rebased patch to current master branch]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Spotted by ASAN while running 'make check'.
Fixes: 4b9b7000 ("tests: Add a test for qemu self announcements")
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This makes vfio_get_region_info_cap() to be used in quirks.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20190307050518.64968-3-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new pseries-4.0 machine type defaults to enabling Spectre/Meltdown
mitigations. Unfortunately those mitigations aren't implemented for TCG
because we're not yet sure if they're necessary or how to implement them.
We don't fail fatally, but we do warn in this case, because it is quite
plausible that Spectre/Meltdown can be exploited through TCG (at least for
the guest to get access to the qemu address space).
This create noise in our testcases though. So, modify the affected tests
to explicitly disable the mitigations to suppress these warnings.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The qemu coding standard is to use CamelCase for type and structure names,
and the pseries code follows that... sort of. There are quite a lot of
places where we bend the rules in order to preserve the capitalization of
internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR".
That was a bad idea - it frequently leads to names ending up with hard to
read clusters of capital letters, and means they don't catch the eye as
type identifiers, which is kind of the point of the CamelCase convention in
the first place.
In short, keeping type identifiers look like CamelCase is more important
than preserving standard capitalization of internal "words". So, this
patch renames a heap of spapr internal type names to a more standard
CamelCase.
In addition to case changes, we also make some other identifier renames:
VIOsPAPR* -> SpaprVio*
The reverse word ordering was only ever used to mitigate the capital
cluster, so revert to the natural ordering.
VIOsPAPRVTYDevice -> SpaprVioVty
VIOsPAPRVLANDevice -> SpaprVioVlan
Brevity, since the "Device" didn't add useful information
sPAPRDRConnector -> SpaprDrc
sPAPRDRConnectorClass -> SpaprDrcClass
Brevity, and makes it clearer this is the same thing as a "DRC"
mentioned in many other places in the code
This is 100% a mechanical search-and-replace patch. It will, however,
conflict with essentially any and all outstanding patches touching the
spapr code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Peter Maydell
Sven Schnelle
Richard Henderson
Vladimir Sementsov-Ogievskiy
Eric Blake
John Snow
Paolo Bonzini
Niels de Vos
Prasanna Kumar Kalever
Alex Bennée
Thomas Huth
Li Qiang
Alexey Kardashevskiy
David Gibson