Commit Graph

11 Commits

Author SHA1 Message Date
Markus Armbruster 9af21dbee1 pci: Trivial device model conversions to realize
Convert the device models where initialization obviously can't fail.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-02-26 12:42:16 +01:00
Alexander Graf cb3778a045 PPC: e500 pci host: Add support for ATMUs
The e500 PCI controller has configurable windows that allow a guest OS
to selectively map parts of the PCI bus space to CPU address space and
to selectively map parts of the CPU address space for DMA requests into
PCI visible address ranges.

So far, we've simply assumed that this mapping is 1:1 and ignored it.

However, the PCICSRBAR (CCSR mapped in PCI bus space) always has to live
inside the first 32bits of address space. This means if we always treat
all mappings as 1:1, this map will collide with our RAM map from the CPU's
point of view.

So this patch adds proper ATMU support which allows us to keep the PCICSRBAR
below 32bits local to the PCI bus and have another, different window to PCI
BARs at the upper end of address space. We leverage this on e500plat though,
mpc8544ds stays virtually 1:1 like it was before, but now also goes via ATMU.

With this patch, I can run guests with lots of RAM and not coincidently access
MSI-X mappings while I really want to access RAM.

Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07 16:16:24 +01:00
Peter Maydell f2e2bc9ca0 hw/pci-host/ppce500: Fix typo in vmstate definition
Fix a typo in the ppce500_pci vmstate definition which meant that
we were migrating the struct pci_inbound using the vmstate for
pci_outbound. Fortunately the two structures have exactly the same
format at the moment (four uint32_ts) so this was harmless, and
we can correcting the typo without a migration compatibility
break because the vmstate name doesn't go out on the wire.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:41 +02:00
Bharat Bhushan 3016dca06c PPC: e500: implement PCI INTx routing
This patch adds pci pin to irq_num routing callback.
This callback is called from pci_device_route_intx_to_irq to
find which pci device maps to which irq.
This fix is required for pci-device passthrough using vfio.

Also without this patch we gets below prints

"
  PCI: Bug - unimplemented PCI INTx routing (e500-pcihost)
  qemu-system-ppc64: PCI: Bug - unimplemented PCI INTx routing (e500-pcihost) "

and Legacy interrupt does not work with pci device passthrough.

Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[agraf: remove double semicolon]
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:34 +02:00
Bharat Bhushan d575a6ce0e PPC: e500: some pci related cleanup
- Use PCI_NUM_PINS rather than hardcoding
 - use "pin" wherever possible

Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:34 +02:00
Juan Quintela 3aff6c2fea savevm: Remove all the unneeded version_minimum_id_old (ppc)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2014-06-16 04:55:26 +02:00
Markus Armbruster 08c58f92f6 pci-host: Consistently set cannot_instantiate_with_device_add_yet
Many PCI host bridges consist of a sysbus device and a PCI device.
You need both for the thing to work.  Arguably, these bridges should
be modelled as a single, composite devices instead of pairs of
seemingly independent devices you can only use together, but we're not
there, yet.

Since the sysbus part can't be instantiated with device_add, yet,
permitting it with the PCI part is useless.  We shouldn't offer
useless options to the user, so let's set
cannot_instantiate_with_device_add_yet for them.

It's already set for Bonito, Grackle, i440FX and Raven.  Document why.

Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch,
pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp,
uni-north-internal-pci, uni-north-pci, and versatile_pci_host.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:23 +01:00
Marcel Apfelbaum 125ee0ed9c devices: Associate devices to their logical category
The category will be used to sort the devices displayed in
the command line help.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
Paolo Bonzini 40c5dce99b hw/p*: pass owner to memory_region_init* functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:48 +02:00
Paolo Bonzini 2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Paolo Bonzini c0907c9e64 hw: move PCI bridges to hw/pci-* or hw/ARCH
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00