This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:
1.) The PIC, PIT, and IOAPIC are implemented in userspace while
the LAPIC is implemented by KVM.
2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
kvm_set_irq. Interrupt delivery is configured via the MSI routing
table, for which routes are reserved in target-i386/kvm.c then
configured in hw/intc/ioapic.c
3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
which is handled in target-i386/kvm.c and relayed to the software
IOAPIC via ioapic_eoi_broadcast.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 01c22f2cdd ("main-loop: Suppress
"I/O thread spun" warnings for qtest") doesn't actually disable the
warning for everyone since some tests don't run under the qtest
accelerator.
Check qtest_driver instead.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1448882964-22433-1-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment get_monitor_def() returns only registers from statically
defined monitor_defs array. However there is a lot of BOOK3S SPRs
which are not in the list and cannot be printed from the monitor.
This adds a new target platform hook - target_get_monitor_def().
The hook is called if a register was not found in the static
array returned by the target_monitor_defs() hook.
The hook is only defined for POWERPC, it returns registered
SPRs and fails on unregistered ones providing the user with information
on what is actually supported on the running CPU. The register value is
saved as uint64_t as it is the biggest supported register size;
target_ulong cannot be used because of the stub - it is in a "common"
code and cannot include "cpu.h", etc; this is also why the hook prototype
is redefined in the stub instead of being included from some header.
This replaces static descriptors for GPRs, FPRs, SRs with a helper which
looks for a value in a corresponding array in the CPUPPCState.
The immediate effect is that all 32 SRs can be printed now (instead of 16);
later this can be reused for VSX or TM registers.
This replaces callbacks for MSR and XER with static descriptors in
monitor_defs as they are stored in CPUPPCState.
While we are here, this adds "cr" as a synonym of "ccr".
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch introduces the functions for enabling the record/replay and for
freeing the resources when simulator closes.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162507.8676.90232.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch introduces checkpoints that synchronize cpu thread and iothread.
When checkpoint is met in the code all asynchronous events from the queue
are executed.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162444.8676.52916.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Clock ticks are considered as the sources of non-deterministic data for
virtual machine. This patch implements saving the clock values when they
are acquired (virtual, host clock).
When replaying the execution corresponding values are read from log and
transfered to the module, which wants to read the values.
Such a design required the clock polling to be synchronized. Sometimes
it is not true - e.g. when timeouts for timer lists are checked. In this case
we use a cached value of the clock, passing it to the client code.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162427.8676.36558.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch includes modifications of common cpu files. All interrupts and
exceptions occured during recording are written into the replay log.
These events allow correct replaying the execution by kicking cpu thread
when one of these events is found in the log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162416.8676.57647.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds global variables, defines, function declarations,
and function stubs for deterministic VM replay used by external modules.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKMrnAAoJECgfDbjSjVRpVL0H/iRc31o00QE4nWBRpxUpf8WJ
V5RWE8qKkDgBha5bS5Nt4vs8K4jkkHGXCbmygMidWph96hUPK8/yHy1A/wmpBibB
5hVSPDK8onavNGJwpaWDrkhd9OhKAaKOuu49T6+VWJGZY/uX5ayqmcN934y0NPUa
4EhH5tyxPpYOYeW9i/VOMQ374gCJcpzYBMug4NJZRyFpfz/b2mzAQtoqw3EsPtB0
vpVJ+fKiCyG39HFKQJW7cL12yBeXOoyhjfDxpumLqwLWMfmde+vJwTFx6wbechgV
aU3jIdvUX8wHCNYaB937NsMaDALoGNqUjbpKnf+xD1w7xr9pwTzdyrGH3rpGLEE=
=+G1+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc, virtio features, fixes, cleanups
New features:
VT-d support for devices behind a bridge
vhost-user migration support
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (37 commits)
hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
i386: keep cpu_model field in MachineState uptodate
vhost: set the correct queue index in case of migration with multiqueue
piix: fix resource leak reported by Coverity
seccomp: add memfd_create to whitelist
vhost-user-test: check ownership during migration
vhost-user-test: add live-migration test
vhost-user-test: learn to tweak various qemu arguments
vhost-user-test: wrap server in TestServer struct
vhost-user-test: remove useless static check
vhost-user-test: move wait_for_fds() out
vhost: add migration block if memfd failed
vhost-user: use an enum helper for features mask
vhost user: add rarp sending after live migration for legacy guest
vhost user: add support of live migration
net: add trace_vhost_user_event
vhost-user: document migration log
vhost: use a function for each call
vhost-user: add a migration blocker
vhost-user: send log shm fd along with log_base
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
it will allow for other parts of QEMU check if it's safe
to map memory region during hotplug/runtime.
That way hotplug path will have a chance to cancel
hotplug operation instead of crashing in vhost_commit().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery. The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function will be used to avoid recursive locking of the iothread lock
whenever address_space_rw/ld*/st* are called with the BQL held, which is
almost always the case.
Tracking whether the iothread is owned is very cheap (just use a TLS
variable) but requires some care because now the lock must always be
taken with qemu_mutex_lock_iothread(). Previously this wasn't the case.
Outside TCG mode this is not a problem. In TCG mode, we need to be
careful and avoid the "prod out of compiled code" step if already
in a VCPU thread. This is easily done with a check on current_cpu,
i.e. qemu_in_vcpu_thread().
Hopefully, multithreaded TCG will get rid of the whole logic to kick
VCPUs whenever an I/O event occurs!
Cc: Frederic Konrad <fred.konrad@greensocs.com>
Message-Id: <1434646046-27150-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Remove it except for two things in qerror.h:
* Two #include to be cleaned up separately to avoid cluttering this
patch.
* The QERR_ macros. Mark as obsolete.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
All users are converted to qemu_set_fd_handler now, drop
qemu_set_fd_handler2 and IOHandlerRecord.fd_read_poll.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-9-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some qemu_set_fd_handler2 stub callers will be converted to
call qemu_set_fd_handler, add this stub for them before making the
change.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
The global parameter 'ram_size' does not take into account
the hotplugged memory.
In some codes, we use 'ram_size' as current VM's real RAM size,
which is not correct.
Add function 'get_current_ram_size' to calculate VM's current RAM size,
it will enumerate present memory devices and also plus ram_size.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).
In all this time, nobody reported the loss. I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.
Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.
Remove the commands along with the code backing them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Warning from the Sparse static analysis tool:
stubs/qtest.c:14:6:
warning: symbol 'qtest_allowed' was not declared. Should it be static?
Add the missing include statement which declares qtest_allowed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not
the BDS. This can happen in three places:
* Device model destruction during unplug: blockdev_auto_del()
* Xen IDE unplug: pci_piix3_xen_ide_unplug()
* drive_del command when no device model is attached: do_drive_del()
The other callers of drive_del are on error paths where refcnt == 1.
If the user somehow manages to plug in a device model using a BDS that
has gone through drive_del(), the legacy configuration passed in
DriveInfo doesn't reach the device model, and automatic deletion on
unplug doesn't work. Worse, some device models such as scsi-disk
crash when DriveInfo doesn't exist.
This is theoretical; I didn't research an actual reproducer. The problem
was introduced when we replaced DriveInfo reference counting by BDS
reference counting in commit a94a3fa..fa510eb.
Fix by keeping DriveInfo alive until its BDS dies.
This affects qemu_drive_opts: now you can't reuse the same ID for new
drive options until the BDS dies. Before, you could, but since the
code always attempts to create a BDS with the same ID next, the
enclosing operation "create a new drive" failed anyway. Different
error path, same result.
Unfortunately, the fix involves use of blockdev.c stuff from block.c,
which is a layering violation. Fortunately, my forthcoming
BlockBackend work will get rid of it again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function monitor_fdset_dup_fd_find_remove() references member of
'mon_fdset' which - when remove flag is set - may be freed in function
monitor_fdset_cleanup().
remove is set by monitor_fdset_dup_fd_remove which in practice
does not need the returned value, so make it void,
and return -1 from monitor_fdset_dup_fd_find_remove.
Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.
Currently there is a single command implemented, "q". It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.
It can be used as:
$QEMU ... \
-device virtio-serial-device \
-device virtserialport,chardev=ctd -chardev testdev,id=ctd
or, use:
$QEMU ... \
-device virtio-serial-device \
-device virtconsole,chardev=ctd -chardev testdev,id=ctd
to bind it to virtio-serial port0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Additional stubs:
- chr_baum_init
- qemu_chr_open_spice_vmc
- qemu_chr_open_spice_port
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
move generic chardev APIs to sysemu/char.h, to make them available to
callers which can not depend on the whole of ui/console.h.
This fixes a build error on systems without pixman-devel:
./configure --disable-tools --disable-docs --target-list=arm-linux-user
...
pixman none
...
make
...
In file included from
/data/home/nchip/linaro/qemu/include/ui/console.h:4:0,
from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2:
/data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal
error: pixman.h: No such file or directory
#include <pixman.h>
^
compilation terminated.
Reported-by: Riku Voipio <riku.voipio@iki.fi>
Tested-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With virtio-blk dataplane, I/O errors might occur while QEMU is
not in the main I/O thread. However, it's invalid to call vm_stop
when we're neither in a VCPU thread nor in the main I/O thread,
even if we were to take the iothread mutex around it.
To avoid this problem, we can raise a request to the main I/O thread,
similar to what QEMU does when vm_stop is called from a CPU thread.
We know that bdrv_error_action is called from an AIO callback, and
the moment at which the callback will fire is not well-defined; it
depends on the moment at which the disk or OS finishes the operation,
which can happen at any time. Note that QEMU is certainly not in a CPU
thread and we do not need to call cpu_stop_current() like vm_stop() does.
However, we need to ensure that any action taken by management will
result in correct detection of the error _and_ a running VM. In particular:
- the event must be raised after the iostatus has been set, so that
"info block" will return an iostatus that matches the event.
- the VM must be stopped after the iostatus has been set, so that
"info block" will return an iostatus that matches the runstate.
The ordering between the STOP and BLOCK_IO_ERROR events is preserved;
BLOCK_IO_ERROR is documented to come first.
This makes bdrv_error_action() thread safe (assuming QMP events are,
which is attacked by a separate series).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This test creates a 'server' chardev to listen for vhost-user messages.
Once VHOST_USER_SET_MEM_TABLE is received it mmaps each received region,
and read 1k bytes from it. The read data is compared to data from readl.
The test requires hugetlbfs to be already mounted and writable. The mount
point defaults to '/hugetlbfs' and can be specified via the environment
variable QTEST_HUGETLBFS_PATH.
The rom pc-bios/pxe-virtio.rom is used to instantiate a virtio pcicontroller.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix up coding style
MST: disable vhost test temporarily
This test needs a bit more work: issues have been
found on legacy systems, disable it for now to
avoid false positives for people.
Will re-enable after issues are addressed.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
chardev depends on lots of external symbols that are not necessarily
needed to be able to use, for example, 'socket chardev'. So add stubs
for these functions:
- bdrv_commit_all
- qemu_chr_open_msmouse
- is_daemonized
- qemu_add_machine_init_done_notifier
- monitor_init
- qemu_notify_event
- vc_init
and this array:
- serial_hds
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make DumpState and endian conversion routines available for arch-specific dump
code by moving into dump.h. DumpState will be needed by arch-specific dump
code to access target endian information from DumpState->ArchDumpInfo. Also
break the dependency of dump.h from stubs/dump.c by creating a separate
dump-arch.h.
This patch doesn't change any functionality.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[ rebased on top of current master branch,
renamed endian helpers to cpu_to_dump{16,32,64},
pass a DumpState * argument to endian helpers,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[agraf: fix to apply]
Signed-off-by: Alexander Graf <agraf@suse.de>
The former is only used twice, the latter is used over 30 times, and
has a nicer error message.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Opening an encrypted image takes an additional step: setting the key.
Between open and the key set, the image must not be used.
We have some protection against accidental use in place: you can't
unpause a guest while we're missing keys. You can, however, hot-plug
block devices lacking keys into a running guest just fine, or insert
media lacking keys. In the latter case, notifying the guest of the
insert is delayed until the key is set, which may suffice to protect
at least some guests in common usage.
This patch makes the protection apply in more cases, in a rather
heavy-handed way: it doesn't let you open encrypted images unless
we're in a paused state.
It doesn't extend the protection to users other than the guest (block
jobs?). Use of runstate_check() from block.c is disgusting. Best I
can do right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When running under qtest we don't actually have any vcpu threads
to be starved, so the warning about the I/O thread spinning isn't
relevant, and the way qtest manipulates the simulated clock means
the warning is produced a lot as a false positive. Suppress it if
qtest_enabled(), so 'make check' output is less noisy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It does not need qemu-common.h. Including exec/gdbstub.h fixes a warning
from static code analyzers and avoids mismatching declarations for
xml_builtin.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation
for architecture-specific use of the device control API to create IRQ
chips.
Following patches will implement the ARM irqchip create method to prefer
the device control API over the older KVM_CREATE_IRQCHIP API.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# By Liu Ping Fan (3) and Jan Kiszka (1)
# Via Jan Kiszka
* kiszka/queues/slirp:
slirp: clean up slirp_update_timeout
slirp: set mainloop timeout with more precise value
slirp: define timeout as macro
slirp: make timeout local
Message-id: cover.1379415024.git.jan.kiszka@siemens.com
If slirp needs to emulate tcp timeout, then the timeout value
for mainloop should be more precise, which is determined by
slirp's fasttimo or slowtimo. Achieve this by swap the logic
sequence of slirp_pollfds_fill and slirp_update_timeout.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Paolo Bonzini