This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Add the minimum of code to prepare for the following patches.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit_active_start is implemented in block/mirror.c, It will create a
job with "commit" type and designated base in block-commit command. This
will be used for committing active layer of device.
Sync mode is removed from MirrorBlockJob because there's no proper type
for commit. The used information is is_none_mode.
The common part of mirror_start and commit_active_start is moved to
mirror_start_job().
Fix the comment wording for commit_start.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since later this function will be used so improve it. The only caller of it
now is qemu-img, and it is not impacted by introduce function
bdrv_snapshot_load_tmp_by_id_or_name() that call bdrv_snapshot_load_tmp()
twice to keep old search logic. bdrv_snapshot_load_tmp_by_id_or_name() return
int to let caller know the errno, and errno will be used later.
Also fix a typo in comments of bdrv_snapshot_delete().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds "remove_break" command which is the reverse of blkdebug
command "break": it removes all breakpoints with given tag and resumes
all the requests.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sheepdog support two kinds of redundancy, full replication and erasure coding.
# create a fully replicated vdi with x copies
-o redundancy=x (1 <= x <= SD_MAX_COPIES)
# create a erasure coded vdi with x data strips and y parity strips
-o redundancy=x:y (x must be one of {2,4,8,16} and 1 <= y < SD_EC_MAX_STRIP)
E.g, to convert a vdi into sheepdog vdi 'test' with 8:3 erasure coding scheme
$ qemu-img convert -o redundancy=8:3 linux-0.2.img sheepdog:test
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previously a BlockDriverState has only one dirty bitmap, so only one
caller (e.g. a block job) can keep track of writing. This changes the
dirty bitmap to a list and creates a BdrvDirtyBitmap for each caller, the
lifecycle is managed with these new functions:
bdrv_create_dirty_bitmap
bdrv_release_dirty_bitmap
Where BdrvDirtyBitmap is a linked list wrapper structure of HBitmap.
In place of bdrv_set_dirty_tracking, a BdrvDirtyBitmap pointer argument
is added to these functions, since each caller has its own dirty bitmap:
bdrv_get_dirty
bdrv_dirty_iter_init
bdrv_get_dirty_count
bdrv_set_dirty and bdrv_reset_dirty prototypes are unchanged but will
internally walk the list of all dirty bitmaps and set them one by one.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this patch adds BlockLimits which introduces discard and write_zeroes
limits and alignment information to the BlockDriverState.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block layer generally keeps the size of an image cached in
bs->total_sectors so that it doesn't have to perform expensive
operations to get the size whenever it needs it.
This doesn't work however when using a backend that can change its size
without qemu being aware of it, i.e. passthrough of removable media like
CD-ROMs or floppy disks. For this reason, the caching is disabled when a
removable device is used.
It is obvious that checking whether the _guest_ device has removable
media isn't the right thing to do when we want to know whether the size
of the host backend can change. To make things worse, non-top-level
BlockDriverStates never have any device attached, which makes qemu
assume they are removable, so drv->bdrv_getlength() is always called on
the protocol layer. In the case of raw-posix, this causes unnecessary
lseek() system calls, which turned out to be rather expensive.
This patch completely changes the logic and disables bs->total_sectors
caching only for certain block driver types, for which a size change is
expected: host_cdrom and host_floppy on POSIX, host_device on win32; also
the raw format in case it sits on top of one of these protocols, but in
the common case the nested bdrv_getlength() call on the protocol driver
will use the cache again and avoid an expensive drv->bdrv_getlength()
call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This field is used by blkverify to disable external snapshots creation.
It will also be used by block filters like quorum to disable external
snapshot creation.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function for retrieving an ImageInfoSpecific object from a block
driver.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some drivers will have driver specifics options but no filename.
This new bool allow the block layer to treat them correctly.
The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and
not having .bdrv_open.
The first exception to this rule will be the quorum driver.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Snapshot creation actually already distinguish id and name since it take
a structured parameter *sn, but delete can't. Later an accurate delete
is needed in qmp_transaction abort and blockdev-snapshot-delete-sync,
so change its prototype. Also *errp is added to tip error, but return
value is kepted to let caller check what kind of error happens. Existing
caller for it are savevm, delvm and qemu-img, they are not impacted by
introducing a new function bdrv_snapshot_delete_by_id_or_name(), which
check the return value and do the operation again.
Before this patch:
For qcow2, it search id first then name to find the one to delete.
For rbd, it search name.
For sheepdog, it does nothing.
After this patch:
For qcow2, logic is the same by call it twice in caller.
For rbd, it always fails in delete with id, but still search for name
in second try, no change to user.
Some code for *errp is based on Pavel's patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the "amend" option to qemu-img which allows changing
image options on existing image files. It also adds the generic bdrv
implementation which is basically just a wrapper for the image format
specific function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.
This also touches all block drivers with a mostly mechanical rename. The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce bdrv_ref/bdrv_unref to manage the lifecycle of
BlockDriverState. They are unused for now but will used to replace
bdrv_delete() later.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).
We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.
[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds sync-modes to the drive-backup interface and
implements the FULL, NONE and TOP modes of synchronization.
FULL performs as before copying the entire contents of the drive
while preserving the point-in-time using CoW.
NONE only copies new writes to the target drive.
TOP copies changes to the topmost drive image and preserves the
point-in-time using CoW.
For sync mode TOP are creating a new target image using the same backing
file as the original disk image. Then any new data that has been laid
on top of it since creation is copied in the main backup_run() loop.
There is an extra check in the 'TOP' case so that we don't bother to copy
all the data of the backing file as it already exists in the target.
This is where the bdrv_co_is_allocated() is used to determine if the
data exists in the topmost layer or below.
Also any new data being written is intercepted via the write_notifier
hook which ends up calling backup_do_cow() to copy old data out before
it gets overwritten.
For mode 'NONE' we create the new target image and only copy in the
original data from the disk image starting from the time the call was
made. This preserves the point in time data by only copying the parts
that are *going to change* to the target image. This way we can
reconstruct the final image by checking to see if the given block exists
in the new target image first, and if it does not, you can get it from
the original image. This is basically an optimization allowing you to
do point-in-time snapshots with low overhead vs the 'FULL' version.
Since there is no old data to copy out the loop in backup_run() for the
NONE case just calls qemu_coroutine_yield() which only wakes up after
an event (usually cancel in this case). The rest is handled by the
before_write notifier which again calls backup_do_cow() to write out
the old data so it can be preserved.
Signed-off-by: Ian Main <imain@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
backup_start() creates a block job that copies a point-in-time snapshot
of a block device to a target block device.
We call backup_do_cow() for each write during backup. That function
reads the original data from the block device before it gets
overwritten. The data is then written to the target device.
Currently backup cluster size is hardcoded to 65536 bytes.
[I made a number of changes to Dietmar's original patch and folded them
in to make code review easy. Here is the full list:
* Drop BackupDumpFunc interface in favor of a target block device
* Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes()
* Use 0 delay instead of 1us, like other block jobs
* Unify creation/start functions into backup_start()
* Simplify cleanup, free bitmap in backup_run() instead of cb
* function
* Use HBitmap to avoid duplicating bitmap code
* Use bdrv_getlength() instead of accessing ->total_sectors
* directly
* Delete the backup.h header file, it is no longer necessary
* Move ./backup.c to block/backup.c
* Remove #ifdefed out code
* Coding style and whitespace cleanups
* Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks
* Keep our own in-flight CowRequest list instead of using block.c
tracked requests. This means a little code duplication but is much
simpler than trying to share the tracked requests list and use the
backup block size.
* Add on_source_error and on_target_error error handling.
* Use trace events instead of DPRINTF()
-- stefanha]
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_add_before_write_notifier() function installs a callback that
is invoked before a write request is processed. This will be used to
implement copy-on-write point-in-time snapshots where we need to copy
out old data before overwriting it.
Note that BdrvTrackedRequest is moved to block_int.h since it is passed
to .notify() functions.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is a pure code move patch, except following modification:
1 get_human_readable_size() is changed to static function.
2 dump_human_image_info() is renamed to bdrv_image_info_dump().
3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs)
instead of direct traverse of global array 'bdrv_states'.
4 collect_snapshots() and collect_image_info() are renamed, unused parameter
*fmt in collect_image_info() is removed.
5 code style fix.
To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H
instead of QAPI_H. Now block.h and snapshot.h are at the same level in
include path, block_int.h and qapi.h will both include them.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not necessary to adjust the slice time at runtime. We already
extend the current slice in order to carry over accounting into the next
slice. Changing the actual slice time value introduces oscillations.
The guest may experience large changes in throughput or IOPS from one
moment to the next when slice times are adjusted.
Reported-by: Benoît Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I/O throttling relies on bdrv_acct_done() which is called when a request
completes. This leaves a blind spot since we only charge for completed
requests, not submitted requests.
For example, if there is 1 operation remaining in this time slice the
guest could submit 3 operations and they will all be submitted
successfully since they don't actually get accounted for until they
complete.
Originally we probably thought this is okay since the requests will be
accounted when the time slice is extended. In practice it causes
fluctuations since the guest can exceed its I/O limit and it will be
punished for this later on.
Account for I/O upon submission so that I/O limits are enforced
properly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After this patch, using -drive with an empty file name continues to open
the file if driver-specific options are used. If no driver-specific
options are specified, the semantics stay as it was: It defines a drive
without an inserted medium.
In order to achieve this, bdrv_open() must be made safe to work with a
NULL filename parameter. The assumption that is made is that only block
drivers which implement bdrv_parse_filename() support using driver
specific options and could therefore work without a filename. These
drivers must make sure to cope with NULL in their implementation of
.bdrv_open() (this is only NBD for now). For all other drivers, the
block layer code will make sure to error out before calling into their
code - they can't possibly work without a filename.
Now an NBD connection can be opened like this:
qemu-system-x86_64 -drive file.driver=nbd,file.port=1234,file.host=::1
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a driver needs structured data and not just a string, it can provide
a .bdrv_parse_filename callback now that parses the command line string
into separate options. Keeping this separate from .bdrv_open_filename
ensures that the preferred way of directly specifying the options always
works as well if parsing the string works.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For now bdrv_get_aio_context() is just a stub that calls
qemu_aio_get_context() since the block layer is currently tied to the
main loop AioContext.
Add the stub now so that the block layer can begin accessing its
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a new option "adapter_type" when converting to vmdk images.
It can be one of the following: ide (default), buslogic, lsilogic
or legacyESX (according to the vmdk spec from vmware).
In case of a non-ide adapter, heads is set to 255 instead of the 16.
The latter is used for "ide".
Also see LP#545089
Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes sense when the next commit starts using the extra buffer space
to perform many I/O operations asynchronously.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The desired granularity may be very different depending on the kind of
operation (e.g. continuous replication vs. collapse-to-raw) and whether
the VM is expected to perform lots of I/O while mirroring is in progress.
Allow the user to customize it, while providing a sane default so that
in general there will be no extra allocated space in the target compared
to the source.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.
Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf
Benoît Canet
Fam Zheng
Peter Lieven
Wenchao Xia
Liu Yuan
Max Reitz
Paolo Bonzini
Alex Bligh
Asias He
Ian Main
Dietmar Maurer
Stefan Hajnoczi
Othmar Pasteka