Improve the layout when listing non-vlan clients via 'info network'. The
result looks like this:
(qemu) info network
Devices not on any VLAN:
orphan: net=10.0.2.0, restricted=n
virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:56
\ network2: fd=5
e1000.0: model=e1000,macaddr=52:54:00:12:34:57
\ network1: net=10.0.2.0, restricted=n
rtl8139.0: model=rtl8139,macaddr=52:54:00:12:34:58
ie. peers are grouped, orphans are listed as before.
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this
feature to forward guest pings to the outer world. The host admin has to
set the ping_group_range in order to grant access to those sockets. To
allow ping for the users group (GID 100):
echo 100 100 > /proc/sys/net/ipv4/ping_group_range
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Recent smb daemons tend to terminate themselves via a process group
SIGTERM. If the daemon is still in qemu's group by that time, qemu will
die as well. Avoid this by always pushing fork_exec processes into a
group of their own, not just (unused) type 2 execs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of accepting every DHCP/BOOTP and TFTP packet, only invoke the
built-in servers if the target is the virtual host.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All other boolean arguments accept on|off - except for slirp's restrict.
Fix that while still accepting the formerly allowed yes|y|no|n, but
reject everything else. This avoids accidentally allowing external
connections because syntax errors were so far interpreted as
'restrict=no'.
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This aligns the code to what the documentation claims: Allow everything
but requests that would have to be routed outside of the virtual LAN.
So we need to drop the unneeded IP-level filter, allow TFTP requests,
and add the missing protocol-level filter to ICMP.
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Superseded by -machine. Therefore, this patch removes -M from the help
list and pushes -machine at the same place in the output.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-machine somehow suggests that it selects the machine, but it doesn't.
Fix that before this command is set in stone.
Actually, -machine should supersede -M and allow to introduce arbitrary
per-machine options to the command line. That will change the internal
realization again, but we will be able to keep the user interface
stable.
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This change is needed because commit 06e12b65
now uses an unsigned long long value
(uint64_t && unsigned long long => unsigned long long).
Cc: Tsuneo Saito <tsnsaito@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
copy_string reimplements strndup, this commit removes it and
replaces all copy_string uses with strndup.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
vcard_emul_options now has repetitive code to read the current
token and advance to the next. After the previous changes,
this repetitive code can be moved in a NEXT_TOKEN macro to
avoid having this code duplicated.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
The previous parser had copy and paste errors when computing
vname_length and type_params_length, "name" was used instead
of respectively vname and type_params. This led to length that could
be bigger than the input string, and to access out of the array
bounds when trying to copy these strings. valgrind rightfully
complained about this. It also didn't handle empty fields correctly,
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
vcard_emul_options used args = strip(args++) a few times, which
was not returning the expected result since the rest of the code
expected args to be increased by at least 1, which is not the case
if *args is not a blank space when this function is called.
Replace these calls by "strip(args+1)" which will do what we expect.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
vcard_emul_mirror_card and vcard_emul_init use
vcard_emul_alloc_arrays to allocate memory for temporary arrays
which will contain elements that in the end will be used one by
one in cac_card_init. The arrays themselves are never stored
anywhere, they are only used as temporary containers. Hence
the memory that was allocated for these arrays should be freed
after use or they will be leaked.
Some tokens claim to do CKM_RSA_X_509, but then choke when they try to do the
actual operations. Try to detect those cases and treat them as if the token
didn't claim support for X_509.
Signed-off-by: Robert Relyea <rrelyea@redhat.com>
This patch adds support for a usb-redir device, which takes a chardev
as a communication channel to an actual usbdevice using the usbredir protocol.
Compiling the usb-redir device requires usbredir-0.3 to be installed for
the usbredir protocol parser, usbredir-0.3 also contains a server for
redirecting usb traffic from an actual usb device. You can get the 0.3
release of usbredir here:
http://people.fedoraproject.org/~jwrdegoede/usbredir-0.3.tar.bz2
(getting a more formal site for it is a WIP)
Example usage:
1) Start usbredirserver for a usb device:
sudo usbredirserver 045e:0772
2) Start qemu with usb2 support + a chardev talking to usbredirserver +
a usb-redir device using this chardev:
qemu ... \
-readconfig docs/ich9-ehci-uhci.cfg \
-chardev socket,id=usbredirchardev,host=localhost,port=4000 \
-device usb-redir,chardev=usbredirchardev,id=usbredirdev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"next" is reserved in systemtap thus using this as a
trace parameter name causes trouble when trying to trace
with systemtap.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spec on UHCI_STS_USBERR: "If the TD on which the error interrupt
occurred also had its IOC bit set, both this bit and Bit 0 are set."
Make UHCI emulation do that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove leftover calls to usb_hid_changed().
Take care to update the changed flag after delivering a event via
GET_REPORT like we do when sending events via interrupt endpoint.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch implements MMU faults caused by TTE.NFO and TTE.E:
- access other than nonfaulting load to a page marked NFO should
raise data_access_exception
- nonfaulting load to a page marked with E bit should raise
data_access_exception
To distinguish nonfaulting loads, this patch extends (abuses?) the rw
argument of get_physical_address_data(). rw is set to 4 on nonfaulting
loads.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Nonfaulting loads should raise fast_data_access_MMU_miss traps as
normal loads do. It is up to the guest OS kernel that detect MMU misses
on nonfaulting load instructions and make them complete without signaling.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cpu_get_phys_page_nofault() calls get_physical_address() twice,
that results in overwriting the fault status in the SFSR.
We need this change in order for nonfaulting loads to raising MMU faults
as normal loads do.
Also removed the call to cpu_get_physical_page_desc() since we are
going to modify nonfaulting loads raising MMU faults.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch makes cpu_get_phys_page_debug() independent from
cpu_get_phys_page_nofault() in advance of implementing nonfaulting load.
This also modifies cpu_get_phys_page_nofault() to be compiled only on
TARGET_SPARC64 because it is not required on SPARC32.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce cpu_sparc_get_phys_page() to be used as a help for splitting
cpu_get_phys_page_debug() from cpu_get_phys_page_nofault().
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add macros for SFSR fields and use macros instead of magic numbers.
Also fix the update of the register fields on MMU faults.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add macros for TTE bits and modify to use macros instead of
magic numbers.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.
A shorthand invocation:
qemu-ga -d
Is equivalent to:
qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
-f /var/run/qemu-ga.pid -d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Missing from previous addition of error to qerror.h. Needed for
qerror_format() and friends.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This is how QMP commands/parameters/types would be defined. We use a
subset of that functionality here to implement functions/types for unit
testing.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This is the code generator for qapi command marshaling/dispatch.
Currently only generators for synchronous qapi/qmp functions are
supported. This script generates the following files:
$(prefix)qmp-marshal.c: command marshal/dispatch functions for each
QMP command defined in the schema. Functions
generated by qapi-visit.py are used to
convert qobjects recieved from the wire into
function parameters, and uses the same
visiter functions to convert native C return
values to qobjects from transmission back
over the wire.
$(prefix)qmp-commands.h: Function prototypes for the QMP commands
specified in the schema.
$(prefix) is used in the same manner as with qapi-types.py
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This is the code generator for qapi visiter functions used to
marshal/unmarshal/dealloc qapi types. It generates the following 2
files:
$(prefix)qapi-visit.c: visiter function for a particular c type, used
to automagically convert qobjects into the
corresponding C type and vice-versa, and well
as for deallocation memory for an existing C
type
$(prefix)qapi-visit.h: declarations for previously mentioned visiter
functions
$(prefix) is used as decribed for qapi-types.py
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
This is the code generator for qapi types. It will generation the
following files:
$(prefix)qapi-types.h - C types corresponding to types defined in
the schema you pass in
$(prefix)qapi-types.c - Cleanup functions for the above C types
The $(prefix) is used to as a namespace to keep the generated code from
one schema/code-generation separated from others so code and be
generated from multiple schemas with clobbering previously created code.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
We need this to parse dictionaries with schema ordering intact so that C
prototypes can be generated deterministically.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Given an object recieved via QMP, this code uses the dispatch table
provided by qmp_registry.c to call the corresponding marshalling/dispatch
function and format return values/errors for delivery to the QMP.
Currently only synchronous QMP functions are supported, but this will
also be used for async QMP functions and QMP guest proxy dispatch as
well.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Registration/lookup functions for that provide a lookup table for
dispatching QMP commands.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Type of Visitor class that can be passed into a qapi-generated C
type's visitor function to free() any heap-allocated data types.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
