The generic loader device supports the U-Boot and Intel HEX executable
formats in addition to the document raw and ELF formats. Reword the
documentation to include these formats and explain how various options
depend on the executable format.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180816145554.9814-1-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the recent set of CPU hardware vulnerabilities on x86, it is
increasingly difficult to understand which CPU configurations are
good to use and what flaws they might be vulnerable to.
This doc attempts to help management applications and administrators in
picking sensible CPU configuration on x86 hosts. It outlines which of
the named CPU models are good choices, and describes which extra CPU
flags should be enabled to allow the guest to mitigate hardware flaws.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180627160103.13634-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Invoking 'make vm-build-freebsd' and friends with V=1 should
propagate that verbosity setting down into the build run
inside the VM. Make sure we do that. This brings it into
line with how the container tests handle V=1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180803085230.30574-4-peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The '-trace' and '--trace' spellings are only both supported in qemu
binary, while for qemu-nbd or qemu-img only '--trace' spelling is
supported. So for the consistency of trace option invocation, we
should use double-dash spelling in our documentation.
This's also mentioned in
https://wiki.qemu.org/BiteSizedTasks#Consistent_option_usage_in_documentation
.
Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1530674247-31200-1-git-send-email-baiyaowei@cmss.chinamobile.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180612065150.21110-1-ville.skytta@iki.fi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will build a coverage report under the current directory in
reports/coverage. At the users option a report can be generated by
directly invoking something like:
make foo/bar/coverage-report.html
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This can be used to remove any stale coverage data before any
particular test run. This is useful for analysing individual tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>---
I'm not entirely sure who's using this information and certainly in a
CI environment it just washes over as additional noise. Later patches
will provide new reporting options so a user who wants to analyse
individual tests will be able to use that to get the information.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-33-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
However, it failed to reject unknown members of "control". For
instance, in QMP command
{"execute": "query-name", "id": 42, "control": {"crap": true}}
"crap" gets silently ignored.
Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob". Simpler code, simpler interface.
An out-of-band command
{"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}
becomes
{"exec-oob": "migrate-pause", "id": 42}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]
Commit cf869d5317 "qmp: support out-of-band (oob) execution" made
"id" mandatory for all commands when the client accepted capability
"oob". This is rather onerous when you play with QMP by hand, and
unnecessarily so: only out-of-band commands need an ID for reliable
matching of response to command.
Revert that part of commit cf869d5317 for now, but have documentation
advise on the need to use "id" with out-of-band commands.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703085358.13941-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
OOB documentation is spread over qmp-spec.txt sections 2.2.1
Capabilities and 2.3 Issuing Commands. The amount of detail is a bit
distracting there. Move the meat of the matter to new section 2.3.1
Out of band execution.
Throw in a few other improvements while there:
* 2.2 Server Greeting: Drop advice to search entire capabilities
array; should be obvious.
* 3. QMP Examples
- 3.1 Server Greeting: Update greeting to the one we expect for the
release. Now shows capability "oob". Update qmp-intro.txt
likewise.
- 3.2 Capabilities negotiation: Show client accepting capability
"oob".
- 3.7 Out-of-band execution: New.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-4-armbru@redhat.com>
[Whitespace tidied up]
Accept 'if' key in top-level elements, accepted as string or list of
string type. The following patches will modify the test visitor to
check the value is correctly saved, and generate #if/#endif code (as a
single #if/endif line or a series for a list).
Example of 'if' key:
{ 'struct': 'TestIfStruct', 'data': { 'foo': 'int' },
'if': 'defined(TEST_IF_STRUCT)' }
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-2-marcandre.lureau@redhat.com>
[Commit message and Documentation improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Affects documentation and a few error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>
Out-Of-Band handlers need to protect shared state if there is any.
Mention it in the document. Meanwhile, touch up some other places too,
either with better English, or reordering of bullets.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180620073223.31964-6-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The preferred way to select the KVM accelerator is to use "-accel kvm"
these days, so let's be consistent in our documentation and help texts.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1528866321-23886-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It often happens that just a few discriminator values imply extra data in
a flat union. Existing checks did not make possible to leave other values
uncovered. Such cases had to be worked around by either stating a dummy
(empty) type or introducing another (subset) discriminator enumeration.
Both options create redundant entities in qapi files for little profit.
With this patch it is not necessary anymore to add designated union
fields for every possible value of a discriminator enumeration.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-Id: <1529311206-76847-2-git-send-email-anton.nefedov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add experimental x-nbd-server-add-bitmap to expose a disabled
bitmap over NBD, in preparation for a pull model incremental
backup scheme. Also fix a corner case protocol issue with
NBD_CMD_BLOCK_STATUS, and add new NBD_CMD_CACHE.
- Eric Blake: tests: Simplify .gitignore
- Eric Blake: nbd/server: Reject 0-length block status request
- Vladimir Sementsov-Ogievskiy: 0/6 NBD export bitmaps
- Vladimir Sementsov-Ogievskiy: nbd/server: introduce NBD_CMD_CACHE
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbK7wDAAoJEKeha0olJ0NqJuMH/0o7wzP3HWIO1pJZvhRA81AP
ZZqZy/8xO0B++keCxzgTbdr9yf6RDtYGjDrNuOcVzqfA1k9E1Cl2pPjS93TzPlzZ
PEgtG6bLXL2jCUi/8/EbZ/TLuoQx5YJc7eXTNREgXDRMLiTEg5Kcmg1n0efhr8Sl
5/bRMDmW1+atO4dJS8bEW5WLuy4IoB823cSHjWoPFRHeNCwmFREwTx2xVULVje84
JZzHYxyaBRquYLKIAew1WidhKVC4OiYtm4F5PxGBB/ZCVkeoDBX5uqZSjOUVt8y7
uOhGYQGW/qSj/s3x74NEL6IPo57Iay/Wq065DbolDx7s0y5t38TocrBnakzOBFU=
=VK6J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-06-20-v2' into staging
nbd patches for 2018-06-20
Add experimental x-nbd-server-add-bitmap to expose a disabled
bitmap over NBD, in preparation for a pull model incremental
backup scheme. Also fix a corner case protocol issue with
NBD_CMD_BLOCK_STATUS, and add new NBD_CMD_CACHE.
- Eric Blake: tests: Simplify .gitignore
- Eric Blake: nbd/server: Reject 0-length block status request
- Vladimir Sementsov-Ogievskiy: 0/6 NBD export bitmaps
- Vladimir Sementsov-Ogievskiy: nbd/server: introduce NBD_CMD_CACHE
# gpg: Signature made Thu 21 Jun 2018 15:53:55 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-06-20-v2:
nbd/server: introduce NBD_CMD_CACHE
docs/interop: add nbd.txt
qapi: new qmp command nbd-server-add-bitmap
nbd/server: implement dirty bitmap export
nbd/server: add nbd_meta_empty_or_pattern helper
nbd/server: refactor NBDExportMetaContexts
nbd/server: fix trace
nbd/server: Reject 0-length block status request
tests: Simplify .gitignore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the very minimum infrastructure necessary for writing
and running functional/acceptance tests, including:
* Documentation
* The avocado_qemu.Test base test class
* One example tests (version.py)
Additional functionality is expected to be added along the tests that
require them.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20180530184156.15634-2-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[ehabkost: fix typo on testing.rst]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use mmap_lock in user-mode to protect TCG state and the page descriptors.
In !user-mode, each vCPU has its own TCG state, so no locks needed.
Per-page locks are used to protect the page descriptors.
Per-TB locks are used in both modes to protect TB jumps.
Some notes:
- tb_lock is removed from notdirty_mem_write by passing a
locked page_collection to tb_invalidate_phys_page_fast.
- tcg_tb_lookup/remove/insert/etc have their own internal lock(s),
so there is no need to further serialize access to them.
- do_tb_flush is run in a safe async context, meaning no other
vCPU threads are running. Therefore acquiring mmap_lock there
is just to please tools such as thread sanitizer.
- Not visible in the diff, but tb_invalidate_phys_page already
has an assert_memory_lock.
- cpu_io_recompile is !user-only, so no mmap_lock there.
- Added mmap_unlock()'s before all siglongjmp's that could
be called in user-mode while mmap_lock is held.
+ Added an assert for !have_mmap_lock() after returning from
the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic.
Performance numbers before/after:
Host: AMD Opteron(tm) Processor 6376
ubuntu 17.04 ppc64 bootup+shutdown time
700 +-+--+----+------+------------+-----------+------------*--+-+
| + + + + + *B |
| before ***B*** ** * |
|tb lock removal ###D### *** |
600 +-+ *** +-+
| ** # |
| *B* #D |
| *** * ## |
500 +-+ *** ### +-+
| * *** ### |
| *B* # ## |
| ** * #D# |
400 +-+ ** ## +-+
| ** ### |
| ** ## |
| ** # ## |
300 +-+ * B* #D# +-+
| B *** ### |
| * ** #### |
| * *** ### |
200 +-+ B *B #D# +-+
| #B* * ## # |
| #* ## |
| + D##D# + + + + |
100 +-+--+----+------+------------+-----------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/HwmBHXe
debian jessie aarch64 bootup+shutdown time
90 +-+--+-----+-----+------------+------------+------------+--+-+
| + + + + + + |
| before ***B*** B |
80 +tb lock removal ###D### **D +-+
| **### |
| **## |
70 +-+ ** # +-+
| ** ## |
| ** # |
60 +-+ *B ## +-+
| ** ## |
| *** #D |
50 +-+ *** ## +-+
| * ** ### |
| **B* ### |
40 +-+ **** # ## +-+
| **** #D# |
| ***B** ### |
30 +-+ B***B** #### +-+
| B * * # ### |
| B ###D# |
20 +-+ D ##D## +-+
| D# |
| + + + + + + |
10 +-+--+-----+-----+------------+------------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/iGpGFtv
The gains are high for 4-8 CPUs. Beyond that point, however, unrelated
lock contention significantly hurts scalability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This applies to both user-mode and !user-mode emulation.
Instead of relying on a global lock, protect the list of incoming
jumps with tb->jmp_lock. This lock also protects tb->cflags,
so update all tb->cflags readers outside tb->jmp_lock to use
atomic reads via tb_cflags().
In order to find the destination TB (and therefore its jmp_lock)
from the origin TB, we introduce tb->jmp_dest[].
I considered not using a linked list of jumps, which simplifies
code and makes the struct smaller. However, it unnecessarily increases
memory usage, which results in a performance decrease. See for
instance these numbers booting+shutting down debian-arm:
Time (s) Rel. err (%) Abs. err (s) Rel. slowdown (%)
------------------------------------------------------------------------------
before 20.88 0.74 0.154512 0.
after 20.81 0.38 0.079078 -0.33524904
GTree 21.02 0.28 0.058856 0.67049808
GHashTable + xxhash 21.63 1.08 0.233604 3.5919540
Using a hash table or a binary tree to keep track of the jumps
doesn't really pay off, not only due to the increased memory usage,
but also because most TBs have only 0 or 1 jumps to them. The maximum
number of jumps when booting debian-arm that I measured is 35, but
as we can see in the histogram below a TB with that many incoming jumps
is extremely rare; the average TB has 0.80 incoming jumps.
n_jumps: 379208; avg jumps/tb: 0.801099
dist: [0.0,1.0)|▄█▁▁▁▁▁▁▁▁▁▁▁ ▁▁▁▁▁▁ ▁▁▁ ▁▁▁ ▁|[34.0,35.0]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the recently-gained QHT feature of returning the matching TB if it
already exists. This allows us to get rid of the lookup we perform
right after acquiring tb_lock.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting parallel TCG generation.
We never remove entries from the radix tree, so we can use cmpxchg
to implement lockless insertions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There's a common pattern in QEMU where a function needs to perform
a data load or store of an N byte integer in a particular endianness.
At the moment this is handled by doing a switch() on the size and
calling the appropriate ld*_p or st*_p function for each size.
Provide a new family of functions ldn_*_p() and stn_*_p() which
take the size as an argument and do the switch() themselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611171007.4165-2-peter.maydell@linaro.org
xhci is rock solid meanwhile. So move it up in the docs and feature it
as prefered usb host adapter, instead of the old shy version saying "you
might want try ...".
While being at it rework the text on ehci and companion controllers too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20180605132915.3640-1-kraxel@redhat.com
Replace the "nvdimm-cap" option which took numeric arguments such as "2"
with a more user friendly "nvdimm-persistence" option which takes symbolic
arguments "cpu" or "mem-ctrl".
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a machine command line option to allow the user to control the Platform
Capabilities Structure in the virtualized NFIT. This Platform Capabilities
Structure was added in ACPI 6.2 Errata A.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a schema that describes the different uses and properties of virtual
machine firmware.
Each firmware executable installed on a host system should come with at
least one JSON file that conforms to this schema. Each file informs the
management applications about
- the firmware's properties and one possible use case / feature set,
- configuration bits that are required to run the firmware binary.
In addition, define rules for management apps for picking the highest
priority firmware JSON file when multiple such files match the search
criteria.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: David Gibson <dgibson@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Kashyap Chamarthy <kchamart@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180509152608.9343-1-lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function has been deprecated for 2.5 years, and there are just a handful
of users. Convert them to memory_region_init_io with NULL callbacks,
and while at it pass the right device as the owner.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New option will be used to allow commands, which are prepared/need
to run, during preconfig state. Other commands that should be able
to run in preconfig state, should be amended to not expect machine
in initialized state or deal with it.
For compatibility reasons, commands that don't use new flag
'allow-preconfig' explicitly are not permitted to run in
preconfig state but allowed in all other states like they used
to be.
Within this patch allow following commands in preconfig state:
qmp_capabilities
query-qmp-schema
query-commands
query-command-line-options
query-status
exit-preconfig
to allow qmp connection, basic introspection and moving to the next
state.
PS:
set-numa-node and query-hotpluggable-cpus will be enabled later in
a separate patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1526057503-39287-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbCMvcAAoJEHWtZYAqC0IRaZkIAKYYlLTjuiSXjOi3pwAIK9MS
kBXqEqQcAXeKXFVYfyrzxQGJK8vVm+I/P+L+Q3jOLanRWM+gZsxGpct7fDHAQQMY
iY+o5RAZUJH9rpr9mgvim332A52B/TmPl3viU6SFVM8y7PSOm3Tm7NsC17ak7XDF
rEY2q5Cou08SU5rTz6Dif2adoz9/YkITMIamz2nVmnjxS5zDCfe+DEh+TrQJXGt5
3n+Ywva7AzYCvuunKIscYD1QBOu7pMMOTduGkABduKyWr1oLeipG1QU/VTqz9S7O
xDvySSZMYUohj2D71J7brc05gmMQb668geDIxuKmnXrSYgSoraJatGvfV0UTxOA=
=BJKH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-05-23-4' into staging
Merge tpm 2018/05/23 v4
# gpg: Signature made Sat 26 May 2018 03:52:12 BST
# gpg: using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-05-23-4:
test: Add test cases that use the external swtpm with CRB interface
docs: tpm: add VM save/restore example and troubleshooting guide
tpm: extend TPM TIS with state migration support
tpm: extend TPM emulator with state migration support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces VHOST_USER_PROTOCOL_F_HOST_NOTIFIER.
With this feature negotiated, vhost-user backend can register
memory region based host notifiers. And it will allow the guest
driver in the VM to notify the hardware accelerator at the
vhost-user backend directly.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD protocol
feature to allow slave to send at most 8 descriptors
in each message to master via ancillary data using the
slave channel.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the docs related to TPM with specs related to VM save and
restore and a troubleshooting guide for TPM migration.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
qemu should read and report hugetlb page allocation
counts exported in the following kernel patch:
commit 4c3ca37c4a4394978fd0f005625f6064ed2b9a64
Author: Jonathan Helman <jonathan.helman@oracle.com>
Date: Mon Mar 19 11:00:35 2018 -0700
virtio_balloon: export hugetlb page allocation counts
Export the number of successful and failed hugetlb page
allocations via the virtio balloon driver. These 2 counts
come directly from the vm_events HTLB_BUDDY_PGALLOC and
HTLB_BUDDY_PGALLOC_FAIL.
Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Update the migration docs:
Among other changes:
* Added a general list of advice for device authors
* Reordered the section on conditional state (subsections etc)
into the order we prefer.
* Add a note about firmware
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180503191059.19576-1-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have just reduced the refcount cache size to the minimum unless
the user explicitly requests a larger one, so we have to update the
documentation to reflect this change.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: c5f0bde23558dd9d33b21fffc76ac9953cc19c56.1523968389.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Compressed clusters are not supposed to have the COPIED bit set, but
this is not made explicit in the specs, so let's document it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 74552e1d6e858d3159cb0c0e188e80bc9248e337.1523376013.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The new property ibm,dynamic-memory-v2 allows memory to be represented
in a more compact manner in device tree.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>