Commit Graph

42 Commits

Author SHA1 Message Date
Markus Armbruster 2a6a4076e1 Clean up ill-advised or unusual header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Samuel Thibault ef763fa4bd slirp: Support link-local DNS addresses
They look like fe80::%eth0

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

---
Changes since last submission:
- fix windows build
2016-07-03 23:29:13 +02:00
Samuel Thibault 1d17654e76 slirp: Add dns6 resolution
This makes get_dns_addr address family-agnostic, thus allowing to add the
IPv6 case.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-07-03 23:27:08 +02:00
Samuel Thibault 0b11c03662 slirp: Allow disabling IPv4 or IPv6
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-04-01 17:51:55 +02:00
Yann Bordenave 7aac531ef2 qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.

Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:25 +01:00
Liu Ping Fan a42e9c4188 slirp: set mainloop timeout with more precise value
If slirp needs to emulate tcp timeout, then the timeout value
for mainloop should be more precise, which is determined by
slirp's fasttimo or slowtimo. Achieve this by swap the logic
sequence of slirp_pollfds_fill and slirp_update_timeout.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17 12:26:05 +02:00
Stefan Hajnoczi 8917c3bdba slirp: switch to GPollFD
Slirp uses rfds/wfds/xfds more extensively than other QEMU components.

The rarely-used out-of-band TCP data feature is used.  That means we
need the full table of select(2) to g_poll(3) events:

  rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR
  wfds -> G_IO_OUT | G_IO_ERR
  xfds -> G_IO_PRI

I came up with this table by looking at Linux fs/select.c which maps
select(2) to poll(2) internally.

Another detail to watch out for are the global variables that reference
rfds/wfds/xfds during slirp_select_poll().  sofcantrcvmore() and
sofcantsendmore() use these globals to clear fd_set bits.  When
sofcantrcvmore() is called, the wfds bit is cleared so that the write
handler will no longer be run for this iteration of the event loop.

This actually seems buggy to me since TCP connections can be half-closed
and we'd still want to handle data in half-duplex fashion.  I think the
real intention is to avoid running the read/write handler when the
socket has been fully closed.  This is indicated with the SS_NOFDREF
state bit so we now check for it before invoking the TCP write handler.
Note that UDP/ICMP code paths don't care because they are
connectionless.

Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces.
I followed the style of the surrounding code.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21 16:17:31 -06:00
Klaus Stengel 63d2960bc4 slirp: Add domain-search option to slirp's DHCP server
This patch will allow the user to include the domain-search option in
replies from the built-in DHCP server. The domain suffixes can be
specified by adding dnssearch= entries to the "-net user" parameter.

[Jan: tiny style adjustments]

Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-11-15 10:27:14 +01:00
Zhi Yong Wu 691a4f3a95 net: determine if packets can be sent before net queue deliver packets
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01 13:32:11 +01:00
Stefano Stabellini 7c7db75576 main_loop_wait: block indefinitely
- remove qemu_calculate_timeout;

- explicitly size timeout to uint32_t;

- introduce slirp_update_timeout;

- pass NULL as timeout argument to select in case timeout is the maximum
value;

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-26 13:14:58 -05:00
Paolo Bonzini d3b12f5dec main-loop: create main-loop.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-10-21 18:14:30 +02:00
Stefan Weil 5a61cb60d6 Fix include statements for qemu-common.h
* qemu-common.h is not a system include file, so it should be included
  with "" instead of <>. Otherwise incremental builds might fail
  because only local include files are checked for changes.

* linux-user/syscall.c included the file twice.

Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-09 09:56:12 +01:00
Ed Swierk df7a86ed73 slirp: Read host DNS config on demand
Currently the qemu user-mode networking stack reads the host DNS
configuration (/etc/resolv.conf or the Windows equivalent) only once
when qemu starts.  This causes name lookups in the guest to fail if the
host is moved to a different network from which the original DNS servers
are unreachable, a common occurrence when the host is a laptop.

This patch changes the slirp code to read the host DNS configuration on
demand, caching the results for at most 1 second to avoid unnecessary
overhead if name lookups occur in rapid succession.  On non-Windows
hosts, /etc/resolv.conf is re-read only if the file has been replaced or
if its size or mtime has changed.

Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:46:58 -05:00
Jan Kiszka bb53fc5394 slirp: Fix guestfwd for incoming data
Unless a virtual server address was explicitly defined (which is
impossible with the legacy -net channel format), guestfwd did not
properly forwarded host->guest packets. This patch fixes it.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27 14:08:23 -05:00
Jan Kiszka ad0d8c4c32 slirp: Allocate/free stack instance dynamically
Allocate the internal slirp state dynamically and provide and call
slirp_cleanup to properly release it after use. This patch finally
unbreaks slirp release and re-instantiation via host_net_* monitor
commands.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka 9f8bd0421d slirp: Use internal state in interface
This now also exports the internal state to the slirp users in qemu,
returning it from slirp_init and expecting it along with service
invocations. Additionally provide an opaque value interface for the
callbacks from slirp into the qemu core.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka 460fec67ee slirp: Factor out internal state structure
The essence of this patch is to stuff (almost) all global variables of
the slirp stack into the structure Slirp. In this step, we still keep
the structure as global variable, directly accessible by the whole
stack. Changes to the external interface of slirp will be applied in
the following patches.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka d918f23efa slirp: Kill slirp_is_inited
Avoid the need for slirp_is_inited by refactoring the protected
slirp_select_* functions. This also avoids the clearing of all fd sets
on select errors.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka 0fe6a7f284 slirp: Drop statistic code
As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:46 -05:00
Jan Kiszka 0d62c4cfe2 slirp: Drop dead code
After all its years inside the qemu tree, there is no point in keeping
the dead code paths of slirp. This patch is a first round of removing
usually commented out code parts. More cleanups need to follow (and
maybe finally a proper reindention).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:46 -05:00
Jan Kiszka 6dbe553fe9 slirp: Add info usernet for dumping connection states
Break out sockstats from the slirp statistics and present them under the
new info category "usernet". This patch also improves the current output
/wrt proper reporting connection source and destination.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:46 -05:00
Jan Kiszka 3c6a05803c slirp: Bind support for host forwarding rules
Extend the hostfwd rule format so that the user can specify on which
host interface qemu should listen for incoming connections. If omitted,
binding will takes place against all interfaces.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:45 -05:00
Jan Kiszka c92ef6a22d slirp: Rework external configuration interface
With the internal IP configuration made more flexible, we can now
enhance the user interface. This patch adds a number of new options to
"-net user": net (address and mask), host, dhcpstart, dns and smbserver.
It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in
order to (hopefully) clarify their meanings. The format of guestfwd is
extended so that the user can define not only the port but also the
virtual server's IP address the forwarding starts from.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:45 -05:00
Jan Kiszka ad196a9d0c slirp: Move smb, redir, tftp and bootp parameters and -net channel
So far a couple of slirp-related parameters were expressed via
stand-alone command line options. This it inconsistent and unintuitive.
Moreover, it prevents both dynamically reconfigured (host_net_add/
delete) and multi-instance slirp.

This patch refactors the configuration by turning -smb, -redir, -tftp
and -bootp as well as -net channel into options of "-net user". The old
stand-alone command line options are still processed, but no longer
advertised. This allows smooth migration of management applications to
to the new syntax and also the extension of that syntax later in this
series.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:44 -05:00
Jan Kiszka e15f4a992c Revert "User networking: Show active connections"
This reverts commit 1c6ed9f337.

It's redundant to slirp statistics, which are going to be split up /
reworked later on.

Conflicts:

	monitor.c
	net.c

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:44 -05:00
Jan Kiszka b8e8af38ee slirp: Reorder initialization
This patch reorders the initialization of slirp itself as well as its
associated features smb and redirection. So far the first reference to
slirp triggered the initialization, independent of the actual -net user
option which may carry additional parameters. Now we save any request to
add a smb export or some redirections until the actual initialization of
the stack. This also allows to move a few parameters that were passed
via global variable into the argument list of net_slirp_init.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09 11:38:49 +01:00
Alexander Graf 1c6ed9f337 User networking: Show active connections
In case you're wondering what connections exactly you have open
or maybe redir'ed in the past, you can't really find out from qemu
right now.

This patch enables you to see all current connections the host
only networking holds open, so you can kill them using the previous
patch.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-28 02:14:56 -05:00
Alexander Graf c1261d8d16 User Networking: Enable removal of redirections
Using the new host_net_redir command you can easily create redirections
on the fly while your VM is running.

While that's great, it's missing the removal of redirections, in case you
want to have a port closed again at a later point in time.

This patch adds support for removal of redirections.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:46:12 -05:00
blueswir1 aa80613232 Move bootp_filename to avoid a sparse warning
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7174 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18 07:29:30 +00:00
blueswir1 511d2b140f Sparse fixes: NULL use, header order, ANSI prototypes, static
Fix Sparse warnings:
 * use NULL instead of plain 0
 * rearrange header include order to avoid redefining types accidentally
 * ANSIfy SLIRP
 * avoid "restrict" keyword
 * add static



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07 15:32:56 +00:00
aliguori a9ba3a856d Add slirp_restrict option (Gleb Natapov)
Add "slirp firewall" to permit connection only to vmchannel addresses.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6241 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08 19:24:00 +00:00
aliguori e1c5a2b334 Redirect slirp traffic to/from qemu character device (Gleb Natapov)
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6240 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08 19:18:21 +00:00
blueswir1 31a60e2275 Make Slirp statistics gathering and output conditional to LOG_ENABLED
Add 'info slirp' command to monitor to display statistics
Disable Slirp debugging code by default


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3451 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-26 18:42:59 +00:00
ths 5fafdf24ef find -type f | xargs sed -i 's/[\t ]$//g' # on most files
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16 21:08:06 +00:00
ths cb4b976b82 Move network related includes to vl.c to help SLIRP-less builds.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3167 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-13 12:39:35 +00:00
bellard 3f423c9c8f removed warnings
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1871 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-30 21:34:15 +00:00
pbrook 115defd163 Set slirp client hostname.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1813 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-16 11:06:58 +00:00
bellard 101c593562 64 bit fixes (initial patch by Gwenole Beauchesne)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1458 c046a42c-6fe2-441c-8c8c-71466251a162
2005-06-05 17:11:42 +00:00
bellard a3d4af03bb allow inetd like program exec
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1060 c046a42c-6fe2-441c-8c8c-71466251a162
2004-09-05 23:10:26 +00:00
bellard 9bf05444b2 port redirection support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1054 c046a42c-6fe2-441c-8c8c-71466251a162
2004-08-25 22:12:49 +00:00
bellard 379ff53dc9 win32 compile
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1016 c046a42c-6fe2-441c-8c8c-71466251a162
2004-07-12 22:33:07 +00:00
bellard f0cbd3ec9f initial user mode network support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@733 c046a42c-6fe2-441c-8c8c-71466251a162
2004-04-22 00:10:48 +00:00