Switch make rules over to use trace-events-all as the
master trace events input file. Add rule that will
construct trace-events-all from $(trace-events-y).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU compiles a list of data directories from various sources. When
consuming a QEMU binary it's useful to be able to get this list of
data directories: a primary reason is so you can list what BIOSes or
keymaps ship with this version of QEMU. However without reproducing
the method that QEMU uses internally, it's not possible to get the
list of data directories.
This commit adds a simple '-L help' option that just lists out the
data directories as qemu calculates them:
$ ./x86_64-softmmu/qemu-system-x86_64 -L help
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu
$ ./x86_64-softmmu/qemu-system-x86_64 -L /tmp -L help
/tmp
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463416475-11728-2-git-send-email-rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The -machine kvm_shadow_mem option takes a size in bytes; say
so explicitly in its documentation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Tobi (github.com/tobimensch)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Robert Ho <robert.hu@intel.com>
Message-Id: <1464678190-9290-2-git-send-email-robert.hu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Limits the rate kbd events from the vnc server are forwarded to the
guest, so input devices which are typically low-bandwidth can keep
up even on bulky input.
v2: update documentation too.
v3: spell fixes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Yang Hongyang <hongyang.yang@easystack.cn>
Message-id: 1464762150-25817-1-git-send-email-kraxel@redhat.com
FW CFG's primary user is QEMU, which uses it to expose configuration
information (in the widest sense) to Firmware. Thus the name FW CFG.
FW CFG can also be used by others for their own purposes. QEMU is
merely acting as transport then. Names starting with opt/ are
reserved for such uses. There is no provision, however, to guide safe
sharing among different such users.
Fix that, loosely following QMP precedence: names should start with
opt/RFQDN/, where RFQDN is a reverse fully qualified domain name you
control.
Based on a more ambitious patch from Michael Tsirkin.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The docs for the secret object type specified the wrong number
of bytes for the AES initialization vector.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Filter-redirector is a netfilter plugin.
It gives qemu the ability to redirect net packet.
redirector can redirect filter's net packet to outdev.
and redirect indev's packet to filter.
filter
+
redirector |
+--------------+
| | |
indev +-----------+ +----------> outdev
| | |
+--------------+
|
v
filter
usage:
-netdev user,id=hn0
-chardev socket,id=s0,host=ip_primary,port=X,server,nowait
-chardev socket,id=s1,host=ip_primary,port=Y,server,nowait
-filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-mirror is a netfilter plugin.
It gives qemu the ability to mirror
packets to a chardev.
usage:
-netdev tap,id=hn0
-chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait
-filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename the recently-added ip6-foo options into ipv6-foo options, to make
them coherent with other ipv6 options.
Also rework the documentation.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
This patches makes input-linux use -object instead of a new command line
switch. So, instead of the switch ...
-input-linux /dev/input/event$nr
... you must create an object this way:
-object input-linux,id=$name,evdev=/dev/input/event$nr
Bonus is that you can hot-add and hot-remove them via monitor now.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1457681901-30916-1-git-send-email-kraxel@redhat.com
When debugging big programs or system emulation sometimes you want both
the verbosity of cpu,exec et all but don't want to generate lots of logs
for unneeded stuff. This patch adds a new option -dfilter which allows
you to specify interesting address ranges in the form:
-dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,...
Then logging code can use the new qemu_log_in_addr_range() function to
decide if it will output logging information for the given range.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch adds support for reading input events directly from linux
evdev devices and forward them to the guest. Unlike virtio-input-host
which simply passes on all events to the guest without looking at them
this will interpret the events and feed them into the qemu input
subsystem.
Therefore this is limited to what the qemu input subsystem and the
emulated input devices are able to handle. Also there is no support for
absolute coordinates (tablet/touchscreen). So we are talking here about
basic mouse and keyboard support.
The advantage is that it'll work without virtio-input drivers in the
guest, the events are delivered to the usual ps/2 or usb input devices
(depending on what the machine happens to have). And for keyboards
qemu is able to switch the keyboard between guest and host on hotkey.
The hotkey is hard-coded for now (both control keys), initialy the
guest owns the keyboard.
Probably most useful when assigning vga devices with vfio and using a
physical monitor instead of vnc/spice/gtk as guest display.
Usage: Add '-input-linux /dev/input/event<nr>' to the qemu command
line. Note that udev has rules which populate /dev/input/by-{id,path}
with static names, which might be more convinient to use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1457087116-4379-2-git-send-email-kraxel@redhat.com
With this property, users can control if this filter is 'on'
or 'off'. The default behavior for filter is 'on'.
For some types of filters, they may need to react to status changing,
So here, we introduced status changing callback/notifier for filter class.
We will skip the disabled ('off') filter when delivering packets in net layer.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
icount sleep takes on or off as options. A few places mention sleep=no
which is not accepted. This patch corrects them.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <1456499811-16819-1-git-send-email-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Migration of pseries-2.3 doesn't have configuration section. Unfortunately,
QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration
section, and break migration both ways.
This patch introduces a property which allows to enforce a configuration
section for machines who don't have one.
It can be set at startup:
-machine enforce-config-section=on
or later from the QEMU monitor:
qom-set /machine enforce-config-section on
It is up to the tooling to set or unset this property according to the
version of the QEMU at the other end of the pipe.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds support for dma-buf passing to spice. This makes virtio-gpu
with 3d acceleration work with spice.
Workflow:
* virglrenderer renders the guest command stream into a texture.
* qemu exports the texture as dma-buf and passes on that dma-buf
to spice-server.
* spice-server passes the dma-buf to spice-client, using unix
socket file descriptor passing.
* spice-client asks the window systems composer to render the
dma-buf to the screen.
Requires cutting edge spice (server) and spice-gtk (client) builds,
from git master branch.
Also requires libvirt managing your qemu instance, and using
"virt-viewer --attach $guest". libvirt will connect spice-server and
spice-client using unix sockets instead of tcp sockets then, which
is required for file descriptor passing.
Works for the local case (spice server and client on the same machine)
only. Supporting remote too is planned (by feeding the dma-bufs into
gpu-assisted video encoder), but not there yet.
gl mode is turned off by default, use "-spice gl=on,$otherargs" to
enable it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current documentation of chardev mux=on is rather brief and opaque;
expand it to hopefully be a bit more helpful.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1455643738-6068-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Microsoft spec about the SLIC and MSDM ACPI tables at
<http://go.microsoft.com/fwlink/p/?LinkId=234834> requires the OEM ID and
OEM Table ID fields to be consistent between the SLIC and the RSDT/XSDT.
That further affects the FADT, because a similar match between the FADT
and the RSDT/XSDT is required by the ACPI spec in general.
This patch wires up the previous three patches.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
Print a list of trace points
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-7-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow enabling events without going through a file, for example:
qemu-system-x86_64 -trace bdrv_aio_writev -trace bdrv_aio_readv
or with globbing too:
qemu-system-x86_64 -trace 'bdrv_aio_*'
if an appropriate backend is enabled (simple, stderr, ftrace).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-6-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Mention the ftrace backend too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-2-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This integrates support for QIOChannelTLS object in the TCP
chardev backend. If the 'tls-creds=NAME' option is passed with
the '-chardev tcp' argument, then it will setup the chardev
such that the client is required to establish a TLS handshake
when connecting. There is no support for checking the client
certificate against ACLs in this initial patch. This is pending
work to QOM-ify the ACL object code.
A complete invocation to run QEMU as the server for a TLS
encrypted serial dev might be
$ qemu-system-x86_64 \
-nodefconfig -nodefaults -device sga -display none \
-chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0,server \
-device isa-serial,chardev=s0 \
-object tls-creds-x509,id=tls0,endpoint=server,verify-peer=off,\
dir=/home/berrange/security/qemutls
To test with the gnutls-cli tool as the client:
$ gnutls-cli --priority=NORMAL -p 9000 \
--x509cafile=/home/berrange/security/qemutls/ca-cert.pem \
127.0.0.1
If QEMU was told to use 'anon' credential type, then use the
priority string 'NORMAL:+ANON-DH' with gnutls-cli
Alternatively, if setting up a chardev to operate as a client,
then the TLS credentials registered must be for the client
endpoint. First a TLS server must be setup, which can be done
with the gnutls-serv tool
$ gnutls-serv --priority=NORMAL -p 9000 --echo \
--x509cafile=/home/berrange/security/qemutls/ca-cert.pem \
--x509certfile=/home/berrange/security/qemutls/server-cert.pem \
--x509keyfile=/home/berrange/security/qemutls/server-key.pem
Then QEMU can connect with
$ qemu-system-x86_64 \
-nodefconfig -nodefaults -device sga -display none \
-chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0 \
-device isa-serial,chardev=s0 \
-object tls-creds-x509,id=tls0,endpoint=client,\
dir=/home/berrange/security/qemutls
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453202071-10289-5-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Typically a UNIX guest OS will log boot messages to a serial
port in addition to any graphical console. An admin user
may also wish to use the serial port for an interactive
console. A virtualization management system may wish to
collect system boot messages by logging the serial port,
but also wish to allow admins interactive access.
Currently providing such a feature forces the mgmt app
to either provide 2 separate serial ports, one for
logging boot messages and one for interactive console
login, or to proxy all output via a separate service
that can multiplex the two needs onto one serial port.
While both are valid approaches, they each have their
own downsides. The former causes confusion and extra
setup work for VM admins creating disk images. The latter
places an extra burden to re-implement much of the QEMU
chardev backends logic in libvirt or even higher level
mgmt apps and adds extra hops in the data transfer path.
A simpler approach that is satisfactory for many use
cases is to allow the QEMU chardev backends to have a
"logfile" property associated with them.
$QEMU -chardev socket,host=localhost,port=9000,\
server=on,nowait,id-charserial0,\
logfile=/var/log/libvirt/qemu/test-serial0.log
-device isa-serial,chardev=charserial0,id=serial0
This patch introduces a 'ChardevCommon' struct which
is setup as a base for all the ChardevBackend types.
Ideally this would be registered directly as a base
against ChardevBackend, rather than each type, but
the QAPI generator doesn't allow that since the
ChardevBackend is a non-discriminated union. The
ChardevCommon struct provides the optional 'logfile'
parameter, as well as 'logappend' which controls
whether QEMU truncates or appends (default truncate).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com>
[Call qemu_chr_parse_common if cd->parse is NULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info
- MEM DEV structure, it has the @handle which is used to associate specified
ACPI NVDIMM device we will introduce in later patch.
Also we can happily ignored the memory device's interleave, the real
nvdimm hardware access is hidden behind host
- DCR structure, it defines vendor ID used to associate specified vendor
nvdimm driver. Since we only implement PMEM mode this time, Command
window and Data window are not needed
The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1
It is disabled on default
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add some basic documentation for the IPMI device.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make use of the QCryptoSecret object to support loading of
encrypted x509 keys. The optional 'passwordid' parameter
to the tls-creds-x509 object type, provides the ID of a
secret object instance that holds the decryption password
for the PEM file.
# printf "123456" > mypasswd.txt
# $QEMU \
-object secret,id=sec0,filename=mypasswd.txt \
-object tls-creds-x509,passwordid=sec0,id=creds0,\
dir=/home/berrange/.pki/qemu,endpoint=server \
-vnc :1,tls-creds=creds0
This requires QEMU to be linked to GNUTLS >= 3.1.11. If
GNUTLS is too old an error will be reported if an attempt
is made to pass a decryption password.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a new QCryptoSecret object class which will be used
for providing passwords and keys to other objects which need
sensitive credentials.
The new object can provide secret values directly as properties,
or indirectly via a file. The latter includes support for file
descriptor passing syntax on UNIX platforms. Ordinarily passing
secret values directly as properties is insecure, since they
are visible in process listings, or in log files showing the
CLI args / QMP commands. It is possible to use AES-256-CBC to
encrypt the secret values though, in which case all that is
visible is the ciphertext. For ad hoc developer testing though,
it is fine to provide the secrets directly without encryption
so this is not explicitly forbidden.
The anticipated scenario is that libvirtd will create a random
master key per QEMU instance (eg /var/run/libvirt/qemu/$VMNAME.key)
and will use that key to encrypt all passwords it provides to
QEMU via '-object secret,....'. This avoids the need for libvirt
(or other mgmt apps) to worry about file descriptor passing.
It also makes life easier for people who are scripting the
management of QEMU, for whom FD passing is significantly more
complex.
Providing data inline (insecure, only for ad hoc dev testing)
$QEMU -object secret,id=sec0,data=letmein
Providing data indirectly in raw format
printf "letmein" > mypasswd.txt
$QEMU -object secret,id=sec0,file=mypasswd.txt
Providing data indirectly in base64 format
$QEMU -object secret,id=sec0,file=mykey.b64,format=base64
Providing data with encryption
$QEMU -object secret,id=master0,file=mykey.b64,format=base64 \
-object secret,id=sec0,data=[base64 ciphertext],\
keyid=master0,iv=[base64 IV],format=base64
Note that 'format' here refers to the format of the ciphertext
data. The decrypted data must always be in raw byte format.
More examples are shown in the updated docs.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds the initial plumbing for split IRQ chip mode via
KVM_CAP_SPLIT_IRQCHIP. In addition to option processing, a number of
kvm_*_in_kernel macros are defined to help clarify which component is
where.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces command line options for enabling recording or replaying
virtual machine behavior. These options are added to icount command line
parameter. They include 'rr' which switches between record and replay
and 'rrfile' for specifying the filename for replay log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162518.8676.70792.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Add a short description for the filter-dump command line options.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This filter is to buffer/release packets. Can be used when using
MicroCheckpointing or other Remus like VM FT solutions.
You can also use it to crudely simulate network delay. Doesn't
actually delay individual packets, but batches them together, which is
a delay of sorts.
Usage:
-netdev tap,id=bn0
-object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000
NOTE:
Interval is in microseconds, it can't be omitted currently, and can't be 0.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch is initially based a patch from Nikolay Nikolaev.
This patch adds vhost-user multiple queue support, by creating a nc
and vhost_net pair for each queue.
Qemu exits if find that the backend can't support the number of requested
queues (by providing queues=# option). The max number is queried by a
new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol
feature VHOST_USER_PROTOCOL_F_MQ is present first.
The max queue check is done at vhost-user initiation stage. We initiate
one queue first, which, in the meantime, also gets the max_queues the
backend supports.
In older version, it was reported that some messages are sent more times
than necessary. Here we came an agreement with Michael that we could
categorize vhost user messages to 2 types: non-vring specific messages,
which should be sent only once, and vring specific messages, which should
be sent per queue.
Here I introduced a helper function vhost_user_one_time_request(), which
lists following messages as non-vring specific messages:
VHOST_USER_SET_OWNER
VHOST_USER_RESET_DEVICE
VHOST_USER_SET_MEM_TABLE
VHOST_USER_GET_QUEUE_NUM
For above messages, we simply ignore them when they are not sent the first
time.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.
With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.
Old syntax for anon-DH credentials:
-vnc hostname:0,tls
New syntax:
-object tls-creds-anon,id=tls0,endpoint=server \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, no client certs:
-vnc hostname:0,tls,x509=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, requiring client certs:
-vnc hostname:0,tls,x509verify=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
-vnc hostname:0,tls-creds=tls0
This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.
If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics
Example CLI configuration:
$QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
dir=/path/to/creds/dir,verify-peer=yes
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-x509,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.
Simple example CLI configuration:
$QEMU -object tls-creds-anon,id=tls0,endpoint=server
Example using pre-created diffie-hellman parameters
$QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
dir=/path/to/creds/dir
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-anon,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch generates smbios tables for ARM mach-virt. Also add
CONFIG_SMBIOS=y for ARM default config.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com
[PMM: Added missing braces around an if().]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Daniel P. Berrange
Richard W.M. Jones
Peter Maydell
Michael Tokarev
Robert Ho
Gerd Hoffmann
Markus Armbruster
Samuel Thibault
Zhang Chen
Alex Bennée
Yann Bordenave
zhanghailiang
Pranith Kumar
Greg Kurz
Laszlo Ersek
Paolo Bonzini
Xiao Guangrong
Corey Minyard
Matt Gingell
Pavel Dovgalyuk
Thomas Huth
Gabriel L. Somlo
Yang Hongyang
Changchun Ouyang
Laurent Vivier
Tiejun Chen
Wei Huang
Gonglei