Commit cc3d15a5ea ("docs: rstfy s390 dasd ipl documentation")
converted docs/devel/s390-dasd-ipl.txt to docs/devel/s390-dasd-ipl.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/s390-dasd-ipl.txt/s390-dasd-ipl.rst/ \
$(git grep -l docs/devel/s390-dasd-ipl.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20210517151702.109066-6-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang versions before v11.0 insist on having the %rX or %cX register
names instead of just a number. Since our Travis-CI is currently
still using Clang v6.0, we have to fix this to avoid failing jobs.
Message-Id: <20210512171550.476130-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clang unfortunately does not support generating code for the z900
architecture level and starts with the z10 instead. Thus to be able
to support compiling with Clang, we have to check for the supported
compiler flags. The disadvantage is of course that the bios image
will only run with z10 guest CPUs upwards (which is what most people
use anyway), so just in case let's also emit a warning in that case
(we will continue to ship firmware images that have been pre-built
with GCC in future releases, so this should not impact normal users,
too).
Message-Id: <20210502174836.838816-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When building on Fedora 34 (gcc version 11.0.0 20210210) we get:
In file included from pc-bios/s390-ccw/main.c:11:
In function ‘memset’,
inlined from ‘boot_setup’ at pc-bios/s390-ccw/main.c:185:5,
inlined from ‘main’ at pc-bios/s390-ccw/main.c:288:5:
pc-bios/s390-ccw/libc.h:28:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
28 | p[i] = c;
| ~~~~~^~~
The offending code is:
memset((char *)S390EP, 0, 6);
where S390EP is a const address:
#define S390EP 0x10008
The compiler doesn't know how big that pointed area is, so it assume that
its length is zero. This has been reported as BZ#99578 to GCC:
"gcc-11 -Warray-bounds or -Wstringop-overread warning when accessing a
pointer from integer literal"
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
As this warning does us more harm than good in the BIOS code (where
lot of direct accesses to low memory are done), silence this warning
for all BIOS objects.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210422145911.2513980-1-philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210502174836.838816-4-thuth@redhat.com>
[thuth: Use the pre-existing cc-option macro instead of adding a new one]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cc-option macro is not doing what it should - compared with the
original from the rules.mak file that got removed with commit
660f793093 ("Makefile: inline the relevant parts of rules.mak"),
the arguments got changed and thus the macro is rather doubling
the QEMU_CFLAGS than adding the flag that should be tested.
Message-Id: <20210502174836.838816-3-thuth@redhat.com>
Fixes: 22fb2ab096 ("pc-bios/s390-ccw: do not use rules.mak")
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with Clang, the compiler emits a warning:
pc-bios/s390-ccw/main.c:210:5: warning: variable 'found' is used uninitialized
whenever switch default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
pc-bios/s390-ccw/main.c:214:16: note: uninitialized use occurs here
IPL_assert(found, "Boot device not found\n");
^~~~~
It's a false positive, it only happens because Clang is not smart enough
to see that the panic() function in the "default:" case can never return.
Anyway, let's explicitely mark panic() with "noreturn" to shut up the
warning.
Message-Id: <20210502174836.838816-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are using the compiler to do the linking of the bios files. GCC still
accepts the "-Ttext=..." linker flag directly and is smart enough to
pass it to the linker, but in case we are compiling with Clang, we have
to use the official way with the "-Wl," prefix instead.
Message-Id: <20210423153646.593153-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with clang, it emits a warning like this:
pc-bios/s390-ccw/jump2ipl.c:86:9: warning: indirection of non-volatile null
pointer will be deleted, not trap [-Wnull-dereference]
if (*((uint64_t *)0) & RESET_PSW_MASK) {
^~~~~~~~~~~~~~~~
pc-bios/s390-ccw/jump2ipl.c:86:9: note: consider using __builtin_trap() or
qualifying pointer with 'volatile'
We could add a "volatile" here to shut it up, but on the other hand,
we also have a pointer variable called "reset_psw" in this file already
that points to the PSW at address 0, so we can simply use that pointer
variable instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210423142440.582188-1-thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw bios with Clang, the compiler complains:
pc-bios/s390-ccw/bootmap.c:302:9: warning: logical not is only applied
to the left hand side of this comparison [-Wlogical-not-parentheses]
if (!mbr->dev_type == DEV_TYPE_ECKD) {
^ ~~
The code works (more or less by accident), since dev_type can only be
0 or 1, but it's better of course to use the intended != operator here
instead.
Fixes: 5dc739f343 ("Allow booting in case the first virtio-blk disk is bad")
Message-Id: <20210421163331.358178-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't read the block if a null block number is reached, because this means that
the end of chunk is reached.
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20210416074736.17409-1-mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When QEMU originally supported the ppce500 machine back in Jan 2014,
it was created with a 1:1 mapping of PCI bus address. Things seemed
to change rapidly that in Nov 2014 with the following QEMU commits:
commit e6b4e5f479 ("PPC: e500: Move CCSR and MMIO space to upper end of address space")
and
commit cb3778a045 ("PPC: e500 pci host: Add support for ATMUs")
the PCI memory and IO physical address were moved to beyond 4 GiB,
but PCI bus address remained below 4 GiB, hence a non-identity
mapping was created. Unfortunately corresponding U-Boot updates
were missed along with the QEMU changes and the U-Boot QEMU ppce500
PCI support has been broken since then, until this issue was fixed
recently in U-Boot mainline v2021.04 release, specifically by the
following U-Boot series:
http://patchwork.ozlabs.org/project/uboot/list/?series=230985&state=*
The cross-compilation toolchain used to build the U-Boot image is:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/10.1.0/x86_64-gcc-10.1.0-nolibc-powerpc-linux.tar.xz
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is mostly compiler warnings fixed but while doing this,
a bug in MIN() in tcgbios was found.
Alexey Kardashevskiy (14):
helpers: Define MIN()
libc: Compile with -Wextra
elf: Compile with -Wextra
usb: Compile with -Wextra
veth: Compile with -Wextra
virtio: Compile with -Wextra
e1000: Compile with -Wextra
libnet: Compile with -Wextra
libhv: Compile with -Wextra
libnvram: Compile with -Wextra
libtpm: Compile with -Wextra
slof/prim: Compile with -Wextra
Makefile: Actually compile with -Wextra
version: update to 20210217
Thomas Huth (1):
virtio-serial: Remove superfluous serial-* words
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before the change /usr/share/qemu/firmware/50-edk2-x86_64-secure.json
contained the relative path:
"filename": "share/qemu/edk2-x86_64-secure-code.fd",
"filename": "share/qemu/edk2-i386-vars.fd",
After then change the paths are absolute:
"filename": "/usr/share/qemu/edk2-x86_64-secure-code.fd",
"filename": "/usr/share/qemu/edk2-i386-vars.fd",
The regression appeared in qemu-5.2.0 (seems to be related
to meson port).
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: "Marc-André Lureau" <marcandre.lureau@redhat.com>
CC: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Bug: https://bugs.gentoo.org/766743
Bug: https://bugs.launchpad.net/qemu/+bug/1913012
Signed-off-by: Jannik Glückert <jannik.glueckert@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Message-Id: <20210131143434.2513363-1-slyfox@gentoo.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210122204441.2145197-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The --enable-bzip2/--disable-bzip2 configure arguments are
somehow misleading, they check for the bzip2 library, not
the bzip2 program.
We need the bzip2 program to install the EDK2 firmware blobs
(see commit 623ef637a2 "configure: Check bzip2 is available").
Check if the bzip2 program in the global meson.build to avoid
the configuration to succeed, but a later when trying to install
the firmware blobs:
../pc-bios/meson.build:5:2: ERROR: Program 'bzip2' not found
Reported-by: John Snow <jsnow@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: c8d5450bba ("configure: move install_blobs from configure to meson")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Globally declare in the main meson.build:
- the list of EDK2 targets,
- whether the EDK2 blobs have to be installed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114174509.2944817-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent binutils changes dropping unsupported options [1] caused a build
issue in regard to the optionroms.
ld -m elf_i386 -T /<<PKGBUILDDIR>>/pc-bios/optionrom//flat.lds -no-pie \
-s -o multiboot.img multiboot.o
ld.bfd: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
This isn't really a regression in ld.bfd, filing the bug upstream
revealed that this never worked as a ld flag [2] - in fact it seems we
were by accident setting --nmagic).
Since it never had the wanted effect this usage of LDFLAGS_NOPIE, should be
droppable without any effect. This also is the only use-case of LDFLAGS_NOPIE
in .mak, therefore we can also remove it from being added there.
[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=983d925d
[2]: https://sourceware.org/bugzilla/show_bug.cgi?id=27050#c5
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20201214150938.1297512-1-christian.ehrhardt@canonical.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A Linux binary will have the string "S390EP" at address 0x10008,
which is important in getting the guest up off the ground. In the
case of a reboot (specifically chreipl going to a new device),
we should defer to the PSW at address zero for the new config,
which will re-write "S390EP" from the new image.
Let's clear it out at this point so that a reipl to, say, a DASD
passthrough device drives the IPL path from scratch without disrupting
disrupting the order of operations for other boots.
Rather than hardcoding the address of this magic (again), let's
define it somewhere so that the two users are visibly related.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20201120160117.59366-3-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If, for example, we boot off a virtio device and chreipl to a vfio-ccw
device, the space at lowcore will be non-zero. We build a Read IPL CCW
at address zero, but it will have leftover PSW data that will conflict
with the Format-0 CCW being generated:
0x0: 00080000 80010000
------ Ccw0.cda
-- Ccw0.chainData
-- Reserved bits
The data address will be overwritten with the correct value (0x0), but
the apparent data chain bit will cause subsequent memory to be used as
the target of the data store, which may not be where we expect (0x0).
Clear out this space when we boot from DASD, so that we know it exists
exactly as we expect.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201120160117.59366-2-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This also brings in two patches that Debian had to include,
qboot_stop_using_inttypes.patch and qboot_no_jump_tables.diff.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201120152408.164346-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The architecture states that the iplb location is only written to low
core for list directed ipl and not for traditional ccw ipl. If we don't
skip this then operating systems that load by reading into low core
memory may fail to start.
We should also not write the iplb pointer for network boot as it might
overwrite content that we got via network.
Fixes: 9bfc04f9ef ("pc-bios: s390x: Save iplb location in lowcore")
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201030122823.347140-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we are now always doing out-of-tree builds, these gitignore
files should not be necessary anymore.
Message-Id: <20200919133637.72744-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's setup a PGM PSW, so we won't load 0s when a program exception
happens. Instead we'll load a disabled wait PSW.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If a blob provides a reset PSW then we should use it instead of
branching to the PSW address and using our own mask.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-4-frankja@linux.ibm.com>
[thuth: Use Elvis operator to shorten long line]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We don't need to save the ipl_continue variable in lowcore and have it
limited to 32 bits because of the lowcore layout. Let's move it to a
new 64 bit variable and get rid of the reset info struct.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-3-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The two main types of zipl component entries are execute and
load/data. The last member of the component entry struct therefore
denotes either a PSW or an address. Let's make this a bit more clear
by introducing a union and cleaning up the code that uses that struct
member.
The execute type component entries written by zipl contain short PSWs,
not addresses. Let's mask them and only pass the address part to
jump_to_IPL_code(uint64_t address) because it expects an address as
visible by the name of the argument.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-2-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Break the loop if `cur_block_nr` is a null block number because this
means that the end of chunk is reached. In this case we will try to
boot the default entry.
Fixes: ba831b2526 ("s390-ccw: read stage2 boot loader data to find menu")
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-3-mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This error takes effect when the magic value "zIPL" is located at the
end of a block. For example if s2_cur_blk = 0x7fe18000 and the magic
value "zIPL" is located at 0x7fe18ffc - 0x7fe18fff.
Fixes: ba831b2526 ("s390-ccw: read stage2 boot loader data to find menu")
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200924085926.21709-2-mhartmay@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Use "<= ... - 4" instead of "< ... - 3"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
enable_subchannel() is already done during is_dev_possibly_bootable()
(which is called from find_boot_device() -> find_subch()), so there
is no need to do this again in the main() function.
Message-Id: <20200806105349.632-9-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If you try to boot with two virtio-blk disks (without bootindex), and
only the second one is bootable, the s390-ccw bios currently stops at
the first disk and does not continue booting from the second one. This
is annoying - and all other major QEMU firmwares succeed to boot from
the second disk in this case, so we should do the same in the s390-ccw
bios, too.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200806105349.632-8-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If no boot device has been specified (via "bootindex=..."), the s390-ccw
bios scans through all devices to find a bootable device. But so far, it
stops at the very first block device (including virtio-scsi controllers
without attached devices) that it finds, no matter whether it is bootable
or not. That leads to some weird situatation where it is e.g. possible
to boot via:
qemu-system-s390x -hda /path/to/disk.qcow2
but not if there is e.g. a virtio-scsi controller specified before:
qemu-system-s390x -device virtio-scsi -hda /path/to/disk.qcow2
While using "bootindex=..." is clearly the preferred way of booting
on s390x, we still can make the life for the users at least a little
bit easier if we look at all available devices to find a bootable one.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1846975
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200806105349.632-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In case the user did not specify a boot device, we want to continue
looking for other devices if there are no valid SCSI disks on a virtio-
scsi controller. As a first step, do not panic in this case and let
the control flow carry the error to the upper functions instead.
Message-Id: <20200806105349.632-6-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move the code to a separate function to be able to re-use it from a
different spot later.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200806105349.632-5-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the "#ifndef E..." guards from the defines here - the header
guard S390_CCW_H at the top of the file should avoid double definition,
and if the error code is defined in a different file already, we're in
trouble anyway, then it's better to see the error at compile time instead
of hunting weird behavior during runtime later.
Also define ENODEV - we will use this in a later patch.
Message-Id: <20200806105349.632-4-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's move this part of the code into a separate function to be able
to use it from multiple spots later.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20200806105349.632-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The main QEMU code is compiled with -std=gnu99, -fwrapv and -fno-common.
We should use the same flags for the s390-ccw bios, too, to avoid that
we get different behavior with different compiler versions that changed
their default settings in the course of time (it happened at least with
-std=... and -fno-common in the past already).
While we're at it, also group the other flags here in a little bit nicer
fashion: Move the two "-m" flags out of the "-f" area and specify them on
a separate line.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20200806105349.632-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200918130354.1879275-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qboot isn't a bios and shouldnt be named that way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200915120909.20838-2-kraxel@redhat.com
This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and not much else.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-7-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refresh the "pc-bios/README" file with edk2 and OpenSSL release info,
matching the edk2-stable202008 firmware images added in the previous
patch.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1852196
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <e967b4d5-bcc2-3846-0ad6-9e8f4d2f9115@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
