A lot of the hang I see are when we end up spinning in
rr_wait_io_event for an event that will never come in playback. As a
new check functions which can see if we are in PLAY mode and kick us
us the wait function so the event can be processed.
This fixes most of the failures in replay_kernel.py
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2013
Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-12-alex.bennee@linaro.org>
Figuring out why replay has failed is tricky at the best of times.
Lets centralise the reporting of a replay sync error and add a little
bit of extra information to help with debugging.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-10-alex.bennee@linaro.org>
The round-robin scheduler will iterate over the CPU list with an
assigned budget until the next timer expiry and may exit early because
of a TB exit. This is fine under normal operation but with icount
enabled and SMP it is possible for a CPU to be starved of run time and
the system live-locks.
For example, booting a riscv64 platform with '-icount
shift=0,align=off,sleep=on -smp 2' we observe a livelock once the kernel
has timers enabled and starts performing TLB shootdowns. In this case
we have CPU 0 in M-mode with interrupts disabled sending an IPI to CPU
1. As we enter the TCG loop, we assign the icount budget to next timer
interrupt to CPU 0 and begin executing where the guest is sat in a busy
loop exhausting all of the budget before we try to execute CPU 1 which
is the target of the IPI but CPU 1 is left with no budget with which to
execute and the process repeats.
We try here to add some fairness by splitting the budget across all of
the CPUs on the thread fairly before entering each one. The CPU count
is cached on CPU list generation ID to avoid iterating the list on each
loop iteration. With this change it is possible to boot an SMP rv64
guest with icount enabled and no hangs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-3-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
replay_add_blocker() takes an Error *. All callers pass one created
like this:
error_setg(&blocker, QERR_REPLAY_NOT_SUPPORTED, "some feature");
Folding this into replay_add_blocker() simplifies the callers, losing
a bit of generality we haven't needed in more than six years.
Since there are no other uses of macro QERR_REPLAY_NOT_SUPPORTED,
replace the remaining one by its expansion, and drop the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There is no need to guard g_free(P) with if (P): g_free(NULL) is safe.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220923090428.93529-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch joins replay event id and async event id into single byte in the log.
It makes processing a bit faster and log a bit smaller.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
--
v2: minor enum fixes (suggested by Richard Henderson)
Message-Id: <165364838393.688121.8191379555130516329.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch decouples checkpoints and async events.
It was a tricky part of replay implementation. Now it becomes
much simpler and easier to maintain.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes event queue flush in the case of emulator
shutdown. replay_finish_events should be called when replay_mode
is not cleared.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364836758.688121.7959245442743676491.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Record/replay uses checkpoints to synchronize the execution
of the threads and timers. Hardware events such as BH are
processed at the checkpoints too.
Event processing can cause refreshing the virtual timers
and calling the icount-related functions, that also use checkpoints.
This patch prevents recursive processing of such checkpoints,
because they have their own records in the log and should be
processed later.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161700476500.1140362.10108444973730452257.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Record/replay provides REPLAY_CLOCK_LOCKED macro to access
the clock when vm_clock_seqlock is locked. This macro is
needed because replay internals operate icount. In locked case
replay use icount_get_raw_locked for icount request, which prevents
excess locking which leads to deadlock. But previously only
record code used *_locked function and replay did not.
Therefore sometimes clock access lead to deadlocks.
This patch fixes clock access for replay too and uses *_locked
icount access function.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161347990483.1313189.8371838968343494161.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces replay_break, replay_delete_break
qmp and hmp commands.
These commands allow stopping at the specified instruction.
It may be useful for debugging when there are some known
events that should be investigated.
replay_break command has one argument - number of instructions
executed since the start of the replay.
replay_delete_break removes previously set breakpoint.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
--
v4 changes:
- removed useless error_free call
Message-Id: <160174520606.12451.7056879546045599378.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds an accessor function for the name of the record/replay
log file. Adding an accessor instead of making variable global,
prevents accidental modification of this variable by other modules.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <160174517710.12451.17645787545733927488.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes virtual timer callbacks depend on order
of virtual timer processing and warping of virtual clock.
Therefore every callback should be logged to make replay deterministic.
This patch creates a checkpoint before every virtual timer callback.
With these checkpoints virtual timers processing and clock warping
events order is completely deterministic.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
--
v2:
- remove mutex lock/unlock for virtual clock checkpoint since it is
not process any asynchronous events (commit ca9759c2a9)
- bump record/replay log file version
Message-Id: <159012932716.27256.8854065545365559921.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU is used without any graphical window,
QEMU execution is terminated with the signal (e.g., Ctrl-C).
Signal processing in QEMU does not include
qemu_system_shutdown_request call. That is why shutdown
event is not recorded by record/replay in this case.
This patch adds shutdown event to the end of the record log.
Now every replay will shutdown the machine at the end.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <159012995470.27967.18129611453659045726.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Record/replay feature of icount allows deterministic running of execution
scenarios. Some CPUs and peripheral devices read random numbers from
external sources making deterministic execution impossible.
This patch adds recording and replaying of random read operations
into guest-random module, which is used by the virtual hardware.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <157675984852.14505.15709141760677102489.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After recent updates block devices cannot be closed on qemu exit.
This happens due to the block request polling when replay is not finished.
Therefore now we stop execution recording before closing the block devices.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KtI3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190821-pull-request' into staging
audio: second batch of -audiodev support, adding support for multiple backends.
# gpg: Signature made Wed 21 Aug 2019 09:40:37 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/audio-20190821-pull-request:
audio: fix memory leak reported by ASAN
audio: use size_t where makes sense
audio: remove read and write pcm_ops
paaudio: fix playback glitches
audio: do not run each backend in audio_run
audio: remove audio_MIN, audio_MAX
paaudio: properly disconnect streams in fini_*
paaudio: do not move stream when sink/source name is specified
audio: audiodev= parameters no longer optional when -audiodev present
paaudio: prepare for multiple audiodev
audio: add audiodev properties to frontends
audio: add audiodev property to vnc and wav_capture
audio: basic support for multi backend audio
audio: reduce glob_audio_state usage
audio: Add missing fall through comments
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch renames replay_get_current_step() and related variables
to make these names consistent with existing 'icount' command line
option and future record/replay hmp/qmp commands.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404428377.18669.15476429889039912070.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes shutdown of the replay process, which is terminated with
the assert when shutdown event is read from the log.
replay_finish_event reads new data_kind and therefore the value of data_kind
should be preserved to be valid at qemu_system_shutdown_request call.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404427238.18669.12378772823692338069.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
As QEMU becomes more multi-threaded and non-synchronized, checkpoints
move from thread to thread. And the event queue that processed at checkpoints
should belong to the same thread in both record and replay executions.
This patch disables asynchronous event processing at virtual clock
checkpoint, because it may be invoked in different threads at record and
replay. This patch is temporary fix until the checkpoints are completely
refactored.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20181018063345.7433.11678.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In record/replay icount mode vCPU thread and iothread synchronize
the execution using the checkpoints.
vCPU thread processes the virtual timers and iothread processes all others.
When iothread wants to wake up sleeping vCPU thread, it sends dummy queued
work. Therefore it could be the following sequence of the events in
record mode:
- IO: sending dummy work
- IO: processing timers
- CPU: wakeup
- CPU: clearing dummy work
- CPU: processing virtual timers
But due to the races in replay mode the sequence may change:
- IO: sending dummy work
- CPU: wakeup
- CPU: clearing dummy work
- CPU: sleeping again because nothing to do
- IO: Processing timers
- CPU: zzzz
In this case vCPU will not wake up, because dummy work is not to be set up
again.
This patch tries to wake up the vCPU when it sleeps and the icount warp
checkpoint isn't met. It means that vCPU has something to do, because
there are no other reasons of non-matching warp checkpoint.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
--
v5: improve checking that vCPU is still sleeping
Message-Id: <20180912081945.3228.19776.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Virtual clock is warped from iothread and vcpu thread. When the hardware
events associated with warp checkpoint, then interrupt delivering may be
non-deterministic if checkpoint is processed in different threads in record
and replay.
This patch disables event processing for clock warp checkpoint and leaves
all hardware events to other checkpoints (e.g., virtual clock).
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095316.1060.4134.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch adds a flag which denies recursive call of replay_checkpoint
function. Checkpoints may be accompanied by the hardware events. When event
is processed, virtual device may invoke timer modification functions that
also invoke the checkpoint function. This leads to infinite loop.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095305.1060.56463.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Replay mutex is held by vCPU thread and destroy function is called
from atexit of the main thread. Therefore we cannot destroy it safely.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180227095254.1060.96971.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This time commit 802f045a5f broke the
replay file format. Also add a comment about this to
replay-internal.h.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180227095231.1060.91180.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.
It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.
Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With the recent addition of ShutdownCause, we want to be able to pass
a cause through any shutdown request, and then faithfully replay that
cause when later replaying the same sequence. The easiest way is to
expand the reply event mechanism to track a series of values for
EVENT_SHUTDOWN, one corresponding to each value of ShutdownCause.
We are free to change the replay stream as needed, since there are
already no guarantees about being able to use a replay stream by
any other version of qemu than the one that generated it.
The cause is not actually fed back until the next patch changes the
signature for requesting a shutdown; a TODO marks that upcoming change.
Yes, this uses the gcc/clang extension of a ranged case label,
but this is not the first time we've used non-C99 constructs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170515214114.15442-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If we find ourselves trying to add an event to the log where time has
gone backwards it is because a vCPU event has occurred and the
main-loop is not yet aware of time moving forward. This should not
happen and if it does its better to fail early than generate a log
that will have weird behaviour.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
A previous commit (3d4d16f4) added support for audio record/playback.
However this breaks the logfile ABI due to the re-ordering of the
ReplayEvents enum. The REPLAY_VERSION check is meant to prevent you
from using old log files in newer QEMUs but this is currently broken.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This dependency is the wrong way, and we will need util/qemu-timer.h from
sysemu/cpus.h in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements initial vmstate creation or loading at the start
of record/replay. It is needed for rewinding the execution in the replay mode.
v4 changes:
- snapshots are not created by default anymore
v3 changes:
- added rrsnapshot option
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071746.4572.61449.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support of recording and replaying network packets in
irount rr mode.
Record and replay for network interactions is performed with the network filter.
Each backend must have its own instance of the replay filter as follows:
-netdev user,id=net1 -device rtl8139,netdev=net1
-object filter-replay,id=replay,netdev=net1
Replay network filter is used to record and replay network packets. While
recording the virtual machine this filter puts all packets coming from
the outer world into the log. In replay mode packets from the log are
injected into the network device. All interactions with network backend
in replay mode are disabled.
v5 changes:
- using iov_to_buf function instead of loop
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch introduces vmstate for replay data structures.
It allows saving and loading vmstate while replaying.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160926080810.6992.68420.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves replay static variables into the structure
to allow saving and loading them with savevm/loadvm.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160926080804.6992.87687.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
replay_configure() pushes and pops a Location with automatic storage
duration. Except it fails to pop when -icount parameter "rr" isn't
given. cur_loc then points to unused stack space, and will most
likely get clobbered in short order.
Clobbered cur_loc can make loc_pop() and error_print_loc() crash or
report bogus locations.
Broken in commit 890ad55.
I didn't take the time to find a reproducer.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1461767349-15329-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
This patch introduces block driver that implement recording
and replaying of block devices' operations.
All block completion operations are added to the queue.
Queue is flushed at checkpoints and information about processed requests
is recorded to the log. In replay phase the queue is matched with
events read from the log. Therefore block devices requests are processed
deterministically.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
[ kwolf: Rebased onto modified and already applied part of the series ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements record and replay of character devices.
It records chardevs communication in replay mode. Recorded information
include data read from backend and counter of bytes written
from frontend to backend to preserve frontend internal state.
If character device was configured through the command line in record mode,
then in replay mode it should be also added to command line. Backend of
the character device could be changed in replay mode.
Replaying of devices that perform ioctl and get_msgfd operations is not
supported.
gdbstub which also acts as a backend is not recorded to allow controlling
the replaying through gdb. Monitor backends are also not recorded.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160314074436.4980.83856.stgit@PASHA-ISP>
[Add stubs. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set error location so the error_report() calls will show
appropriate command-line argument or config file info.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch introduces command line options for enabling recording or replaying
virtual machine behavior. These options are added to icount command line
parameter. They include 'rr' which switches between record and replay
and 'rrfile' for specifying the filename for replay log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162518.8676.70792.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Some devices are not supported by record/replay subsystem.
This patch introduces replay blocker which denies starting record/replay
if such devices are included into the configuration.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162512.8676.11367.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch introduces the functions for enabling the record/replay and for
freeing the resources when simulator closes.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162507.8676.90232.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
