Use the -dtb argument for passing is a custom dtb rather than the old
hardcoded "mb.dtb"
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
defined macros for the addresses of the peripherals in machine model
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This belongs in the machine specific reset function
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
factored out the copy-pasted common boot code from the two microblaze platforms
into a dedicated microblaze bootloader (microblaze_boot.o).
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This reworks the image loading on s390.
Newer kernels will not always have a 0dd0 (basr 13,0) at address 0x10000.
We must not rely on specific code at certain addresses. This check was
introduced to warn users that tried to load vmlinux, since ELF loading
was not supported. Lets wire that up. If elf loading fails, we assume
that this is a standard kernel image and load that via load_image_targphys.
This patch also changes all other users of load_image to
load_image_targphys to be consistent. (the elf loader registers the kernel
as rom).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm11mpcore: Fix broken realview_mpcore/arm11mpcore_priv properties
arm: add device tree support
arm: make sure that number of irqs can be represented in GICD_TYPER.
arm: clean up GIC constants
Fix confusion in the Property arrays for the "arm11mpcore_priv"
(per-CPU devices for the ARM11MPcore CPU) and "realview_mpcore"
(realview-eb board specific device encapsulating CPU and some
extra interrupt controllers) -- the num-irq property was defined
on the wrong device and the mpcore_rirq_properties were defined
as offsets in the wrong structure. The effect was that the
realview-eb-mpcore machine would abort on startup trying to
allocate an insane amount of memory. (This bug was introduced in
the QOM conversion in commit 999e12bb.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If compiled with CONFIG_FDT, allow user to specify a device tree file using
the -dtb argument. If the machine supports it then the dtb will be loaded
into memory and passed to the kernel on boot.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[Peter Maydell: Use machine opt rather than global to pass dtb filename]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We currently assume that the number of interrupts (ITLinesNumber in
the architecture reference manual) is divisible by 32, since we
present it to the guest when it reads GICD_TYPER (in gic_dist_readb())
as (N / 32) - 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Interrupts numbers 0-31 are private to the processor interface, 32-1019 are
general interrupts. Add GIC_INTERNAL and substitute everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[Peter Maydell: converted some tabs to spaces]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qemu-kvm/memory/core: (30 commits)
memory: allow phys_map tree paths to terminate early
memory: unify PhysPageEntry::node and ::leaf
memory: change phys_page_set() to set multiple pages
memory: switch phys_page_set() to a recursive implementation
memory: replace phys_page_find_alloc() with phys_page_set()
memory: simplify multipage/subpage registration
memory: give phys_page_find() its own tree search loop
memory: make phys_page_find() return a MemoryRegionSection
memory: move tlb flush to MemoryListener commit callback
memory: unify the two branches of cpu_register_physical_memory_log()
memory: fix RAM subpages in newly initialized pages
memory: compress phys_map node pointers to 16 bits
memory: store MemoryRegionSection pointers in phys_map
memory: unify phys_map last level with intermediate levels
memory: remove first level of l1_phys_map
memory: change memory registration to rebuild the memory map on each change
memory: support stateless memory listeners
memory: split memory listener for the two address spaces
xen: ignore I/O memory regions
memory: allow MemoryListeners to observe a specific address space
...
* qemu-kvm/uq/master:
pc-bios: update kvmvapic.bin
kvmvapic: Use optionrom helpers
optionsrom: Reserve space for checksum
kvmvapic: Simplify mp/up_set_tpr
kvmvapic: Introduce TPR access optimization for Windows guests
kvmvapic: Add option ROM
target-i386: Add infrastructure for reporting TPR MMIO accesses
Allow to use pause_all_vcpus from VCPU context
Process pending work while waiting for initial kick-off in TCG mode
Remove useless casts from cpu iterators
kvm: Set cpu_single_env only once
kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
* kwolf/for-anthony: (27 commits)
qemu-img: fix segment fault when the image format is qed
qemu-io: fix segment fault when the image format is qed
qemu-tool: revert cpu_get_clock() abort(3)
qemu-iotests: Test rebase with short backing file
qemu-iotests: 026: Reduce output changes for cache=none qcow2
qemu-iotests: Filter out DOS line endings
test: add image streaming tests
qemu-iotests: add iotests Python module
qemu-iotests: export TEST_DIR for non-bash tests
QMP: Add qmp command for blockdev-group-snapshot-sync
qapi: Introduce blockdev-group-snapshot-sync command
qcow2: Reject too large header extensions
qcow2: Fix offset in qcow2_read_extensions
block: drop aio_multiwrite in BlockDriver
block: remove unused fields in BlockDriverState
qcow2: Fix build with DEBUG_EXT enabled
ide: fail I/O to empty disk
fdc: DIR (Digital Input Register) should return status of current drive...
fdc: fix seek command, which shouldn't check tracks
fdc: check if media rate is correct before doing any transfer
...
* kraxel/usb.39: (21 commits)
usb: Resolve warnings about unassigned bus on usb device creation
usb-redir: Return USB_RET_NAK when we've no data for an interrupt endpoint
usb-redir: Limit return values returned by iso packets
usb-redir: Let the usb-host know about our device filtering
usb-redir: Always clear device state on filter reject
usb-redir: Fix printing of device version
ehci: drop old stuff
usb-ehci: Handle ISO packets failing with an error other then NAK
libcacard: fix reported ATR length
usb-ccid: advertise SELF_POWERED
libcacard: link with glib for g_strndup
usb-desc: fix user trigerrable segfaults (!config)
usb-ehci: sanity-check iso xfers
usb: add tracepoint for usb packet state changes.
usb-xhci: enable packet queuing
usb-uhci: implement packet queuing
usb-uhci: process uhci_handle_td return code via switch.
usb-uhci: add UHCIQueue
usb-uhci: cleanup UHCIAsync allocation & initialization.
usb-ehci: fix reset
...
Requesting a read or a write operation on an empty disk can lead
to QEMU dumping core.
Also fix a few braces here and there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The seek command just sends step pulses to the drive and doesn't care if
there is a medium inserted of if it is banging the head against the drive.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The programmed rate has to be the same as the required rate for the
floppy format ; if that's not the case, the transfer should abort.
This check can be disabled by using the 'check_media_rate' property.
Save media rate value only if media rate check is enabled.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set it to true for current Qemu versions, and false for previous ones
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Floppies must be read at a specific transfer rate, depending of its own format.
Update floppy description table to include required transfer rate.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DIR and CCR registers share the same address ; DIR is read-only
while CCR is write-only
CCR register is used to change media transfer rate, which will be
checked in following changes.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A real floppy doesn't attempt to write to read-only media either.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In fact, only three control commands generate an interrupt:
read_id, recalibrate and seek
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This bit must be active while a command is currently executed.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Floppies can be simple or double-sided. However, current code
was only taking the common case into account (ie 2 sides).
This repairs single-sided floppies, which where totally broken
before this patch : for track > 0, wrong sector number was
calculated, and data was read/written at wrong place on
underlying device.
Fortunately, only some 360 kB floppies are single-sided, so
this bug was probably not seen much.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Current memory listeners are incremental; that is, they are expected to
maintain their own state, and receive callbacks for changes to that state.
This patch adds support for stateless listeners; these work by receiving
a ->begin() callback (which tells them that new state is coming), a
sequence of ->region_add() and ->region_nop() callbacks, and then a
->commit() callback which signifies the end of the new state. They should
ignore ->region_del() callbacks.
Signed-off-by: Avi Kivity <avi@redhat.com>
This allows reverse iteration, which in turns allows consistent ordering
among multiple listeners:
l1->add
l2->add
l2->del
l1->del
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Although qxl creates a shared displaysurface when the qxl surface is
upright and doesn't need to be flipped there is no guarantee that the
surface doesn't become unshared for some reason. Rename qxl_flip to
qxl_blit and fix it to handle both flip and non-flip cases.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds an 64bit pci bar for vram. It is turned off by default.
It can be enabled by setting the size of the 64bit bar to be larger than
the 32bit bar. Both 32bit and 64bit bar refer to the same memory. Only
the first part of the memory is available via 32bit bar.
The intention is to allow large vram sizes for 64bit guests, by allowing
the vram bar being mapped above 4G, so we don't have to squeeze it into
the pci I/O window below 4G.
With vram_size_mb=16 and vram64_size_mb=256 it looks like this:
00:02.0 VGA compatible controller: Red Hat, Inc. Device 0100 (rev 02) (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc Device 1100
Physical Slot: 2
Flags: fast devsel, IRQ 10
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at fd020000 (32-bit, non-prefetchable) [size=8K]
I/O ports at c5a0 [size=32]
Memory at ffe0000000 (64-bit, prefetchable) [size=256M]
Expansion ROM at fd000000 [disabled] [size=64K]
[ mapping above 4G needs patched seabios:
http://www.kraxel.org/cgit/seabios/commit/?h=pci64 ]
When creating an USB device the old way, there is no way to specify the
target bus. Thus the warning issued by usb_create makes no sense and
rather confuses our users.
Resolve this by passing a bus reference to the usbdevice_init handler
and letting those handlers forward it to usb_create.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch the ehci code was not checking for any other errors other
then USB_RET_NAK. This causes 2 problems:
1) Other errors are not reported to the guest.
2) When transactions with the ITD_XACT_IOC bit set completing with another
error would not result in USBSTS_INT getting set.
I hit this problem when unplugging devices while iso data was streaming from
the device to the guest. When this happens it takes a while for the guest to
process the unplugging and remove ISO transactions from the ehci schedule, in
the mean time these transactions would complete with a result of USB_RET_NODEV,
which was not handled. This lead to the Linux guest's usb subsystem "hanging",
that is it would no longer see new usb devices getting plugged in and running
for example lsusb would lead to a stuck (D state) lsusb process. This patch
fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before commit ed5a83ddd8 each device
provided it's own response to USB_REQ_GET_STATUS, but after it that
response was based on bmAttributes, which was errounously set for
usb-ccid as 0xa0 and not 0xe0.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Check for dev->config being NULL in two places:
USB_REQ_GET_CONFIGURATION and USB_REQ_GET_STATUS.
The behavior of USB_REQ_GET_STATUS is unspecified in the Default state,
that corresponds to dev->config being NULL (it defaults to NULL and is
reset whenever a SET_CONFIGURATION with value 0, or attachment). I
implemented it to correspond with the state before
ed5a83ddd8, the commit moving SET_STATUS
to usb-desc; if dev->config is not set we return whatever is in the
first configuration.
The behavior of USB_REQ_GET_CONFIGURATION is also undefined before any
SET_CONFIGURATION, but here we just return 0 (same as specified for the
Address state).
A win7 guest failed to initialize the device before this patch,
segfaulting when GET_STATUS was called with dev->config == NULL. With
this patch the passthrough device still doesn't work but the failure is
unrelated.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a sanity check to itd processing to make sure the
endpoint addressed by the guest is actually an iso endpoint. Also
verify that usb drivers don't return USB_RET_ASYNC which is illegal for
iso xfers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When a usb device is busy processing a packet (and returns
USB_RET_ASYNC), continue walking the transfer descriptor list
and process them to fill the request queue.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Restruct the uhci_handle_td return code processing to make the
control flow more clear and the code more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
UHCIAsync structs (in-flight requests) grouped in UHCIQueue now.
Each (active) usb endpoint gets its own UHCIQueue.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Two reset fixes:
* pick up s->usbcmd value after ehci_reset call to make sure it
keeps the reset value and doesn't get rubbish filled in when
val is written back to the mmio register array later on.
* make sure the frame timer is zapped on reset.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Activate usb hid pointer devices (mouse+tablet) unconditionally
on polls, even if we NAK the poll due to lack of new events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
RHBZ# 747011
Removes the last user of QXL_SYNC when using update drivers that use the
_ASYNC io ports.
The last user is qxl_render_update, it is called both by qxl_hw_update
which is the vga_hw_update_ptr passed to graphic_console_init, and by
qxl_hw_screen_dump.
At the same time the QXLRect area being passed to the red_worker thread
is passed as a copy, as part of the QXLCookie.
The implementation uses interface_update_area_complete with a bh to make
sure dpy_update and qxl_flip are called from the io thread, otherwise
the vga->ds->surface.data can change under our feet.
With this patch sdl+spice works fine. But spice by itself doesn't
produce the expected screendumps unless repeated a few times, due to
ppm_save being called before update_area (rendering done in spice server
thread) having a chance to complete. Fixed by next patch, but see commit
message for problem introduced by it.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested on linux and windows guests. For negative stride, qxl_flip copies
directly to vga->ds->surface->data, for positive it's reallocated to
share qxl->guest_primary.data
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
