Commit Graph

24 Commits

Author SHA1 Message Date
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Max Reitz 1e47cb7f52 block/null: Generate filename even with latency-ns
While we cannot represent the latency-ns option in a filename, it is not
a strong option so not being able to should not stop us from generating
a filename nonetheless.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-30-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:27 +01:00
Max Reitz 998b3a1e5a block: Purify .bdrv_refresh_filename()
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both
refresh the filename (BDS.exact_filename) and set BDS.full_open_options.
Now that we have generic code in the central bdrv_refresh_filename() for
creating BDS.full_open_options, we can drop the latter part from all
BlockDriver.bdrv_refresh_filename() implementations.

This also means that we can drop all of the existing default code for
this from the global bdrv_refresh_filename() itself.

Furthermore, we now have to call BlockDriver.bdrv_refresh_filename()
after having set BDS.full_open_options, because the block driver's
implementation should now be allowed to depend on BDS.full_open_options
being set correctly.

Finally, with this patch we can drop the @options parameter from
BlockDriver.bdrv_refresh_filename(); also, add a comment on this
function's purpose in block/block_int.h while touching its interface.

This completely obsoletes blklogwrite's implementation of
.bdrv_refresh_filename().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-25-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:27 +01:00
Max Reitz 2654267cc1 block: Add strong_runtime_opts to BlockDriver
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.

Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:27 +01:00
Vladimir Sementsov-Ogievskiy f66b1f0e27 block: drop empty .bdrv_close handlers
.bdrv_close handler is optional after previous commit, no needs to keep
empty functions more.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-08-15 12:50:39 +02:00
Eric Blake b3241e9274 null: Switch to byte-based read/write
We are gradually moving away from sector-based interfaces, towards
byte-based.  Make the change for the last few sector-based callbacks
in the null-co and null-aio drivers.

Note that since the null driver does nothing on writes, it trivially
supports the BDRV_REQ_FUA flag (all writes have already landed to
the same bit-bucket without needing an extra flush call).  Also, since
the null driver does just as well with byte-based requests, we can
now avoid cycles wasted on read-modify-write by taking advantage of
the block layer now defaulting the alignment to 1 instead of 512.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-15 16:11:41 +02:00
Marc-André Lureau f5a74a5a50 qobject: Modify qobject_ref() to return obj
For convenience and clarity, make it possible to call qobject_ref() at
the time when the reference is associated with a variable, or
argument, by making qobject_ref() return the same pointer as given.
Use that to simplify the callers.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Useless change to qobject_ref_impl() dropped, commit message improved
slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Marc-André Lureau cb3e7f08ae qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked().  Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Eric Blake 05c33f1021 null: Switch to .bdrv_co_block_status()
We are gradually moving away from sector-based interfaces, towards
byte-based.  Update the null driver accordingly.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02 18:39:07 +01:00
Markus Armbruster 922a01a013 Move include qemu/option.h from qemu-common.h to actual users
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09 13:52:16 +01:00
Stefan Hajnoczi 78f1d3d6a6 coroutine: simplify co_aio_sleep_ns() prototype
The AioContext pointer argument to co_aio_sleep_ns() is only used for
the sleep timer.  It does not affect where the caller coroutine is
resumed.

Due to changes to coroutine and AIO APIs it is now possible to drop the
AioContext pointer argument.  This is safe to do since no caller has
specific requirements for which AioContext the timer must run in.

This patch drops the AioContext pointer argument and renames the
function to simplify the API.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171109102652.6360-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-19 09:25:27 +00:00
Kevin Wolf 809eb70ed6 block/null: Remove 'filename' option
This option was only added to allow 'null-co://' and 'null-aio://' as
filenames, its value never served any actual purpose and was ignored.
Nevertheless it was accepted as '-drive driver=null,filename=foo'.

The correct way to enable the protocol prefixes (and that without adding
a useless -drive option) is implementing .bdrv_parse_filename. This is
what this patch does.

Technically, this is an incompatible change, but the null block driver
is only used for benchmarking, testing and debugging, and an option
without effect isn't likely to be used by anyone anyway, so no bad
effects are to be expected.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-08 15:19:16 +02:00
Eric Blake 46f5ac205a qobject: Use simpler QDict/QList scalar insertion macros
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.

Patch created mechanically via:
  spatch --sp-file scripts/coccinelle/qobject.cocci \
    --macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09 09:13:51 +02:00
Paolo Bonzini fffb6e1223 block: use aio_bh_schedule_oneshot
This simplifies bottom half handlers by removing calls to qemu_bh_delete and
thus removing the need to stash the bottom half pointer in the opaque
datum.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-10-07 13:34:07 +02:00
Max Reitz 67882b1535 block/null: Implement bdrv_refresh_filename()
The null block driver ignores any filename used for creating its BDSs,
which allows creating such BDSs even without any filename at all. In
that case, we currently construct a JSON filename when queried instead
of a plain "null-co://" or "null-aio://". This patch implements
bdrv_refresh_filename() to remedy this behavior.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-4-mreitz@redhat.com
[mreitz@redhat.com: Added commit message]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-06-16 15:20:37 +02:00
Max Reitz a90639270d block/null-{co,aio}: Implement get_block_status()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30 12:16:04 +02:00
Max Reitz cd219eb1e5 block/null-{co,aio}: Allow reading zeroes
This is optional so that it does not impede the null block driver's
performance unless this behavior is desired.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30 12:16:03 +02:00
Markus Armbruster da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Peter Maydell 80c71a241a block: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20 13:36:23 +01:00
Fam Zheng 1c2b49a172 block/null: Support reopen
Reopen is used in block-commit. With this always-succeed operation, it
is now possible to test committing to a null drive, by specifying
"null-aio://" or "null-co://" as the backing image when creating the
qcow2 image.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427852740-24315-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:09 +02:00
Fam Zheng e5e51dd3af block/null: Latency simulation by adding new option "latency-ns"
Aio context switch should just work because the requests will be
drained, so the scheduled timer(s) on the old context will be freed.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427852740-24315-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:09 +02:00
Markus Armbruster 097310b53e block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
I'll use it with block backends shortly, and the name is going to fit
badly there.  It's a block layer thing anyway, not just a block driver
thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Markus Armbruster 7c84b1b831 block: Rename BlockDriverAIOCB* to BlockAIOCB*
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there.  It's a block layer thing anyway, not just a
block driver thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Fam Zheng e819ab2277 block: Introduce "null" drivers
This is an analogue to Linux null_blk. It can be used for testing or
benchmarking block device emulation and general block layer
functionalities such as coroutines and throttling, where disk IO is not
necessary or wanted.

Use null-aio:// for AIO version, and null-co:// for coroutine version.

[Resolved conflict with Fam's async bdrv_aio_cancel() series:
1. Drop .bdrv_aio_cancel() since it is now done by block.c
2. Rename qemu_aio_release() to qemu_aio_unref()
--Stefan]

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1410415798-20673-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:23 +01:00