Commit Graph

9 Commits

Author SHA1 Message Date
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Eric Auger 1e575b6664 hw/intc/arm_gicv3: Introduce redist-region-count array property
To prepare for multiple redistributor regions, we introduce
an array of uint32_t properties that stores the redistributor
count of each redistributor region.

Non accelerated VGICv3 only supports a single redistributor region.
The capacity of all redist regions is checked against the number of
vcpus.

Machvirt is updated to set those properties, ie. a single
redistributor region with count set to the number of vcpus
capped by 123.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1529072910-16156-4-git-send-email-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22 13:28:36 +01:00
Philippe Mathieu-Daudé bf85388169 qdev: use device_class_set_parent_realize/unrealize/reset()
changes generated using the following Coccinelle patch:

  @@
  type DeviceParentClass;
  DeviceParentClass *pc;
  DeviceClass *dc;
  identifier parent_fn;
  identifier child_fn;
  @@
  (
  +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->realize;
  ...
  -dc->realize = child_fn;
  |
  +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->unrealize;
  ...
  -dc->unrealize = child_fn;
  |
  +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn);
  -pc->parent_fn = dc->reset;
  ...
  -dc->reset = child_fn;
  )

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180114020412.26160-4-f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-05 13:54:38 +01:00
Peter Maydell 0bfa02595a hw/intc/arm_gicv3: Don't signal Pending+Active interrupts to CPU
The GICv3 requires that we only signal Pending interrupts to
the CPU. This category does not include Pending+Active interrupts,
which means we need to check whether the interrupt is Active in
the gicr_int_pending() and gicd_int_pending() functions.

Interrupts are rarely in the Active+Pending state, but KVM
uses this as part of its handling of the virtual timer, so
this bug was causing KVM to go into an infinite loop of
taking the vtimer interrupt when the guest first triggered it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-12-27 14:59:25 +00:00
Peter Maydell 359fbe65e0 hw/intc/arm_gicv3: Implement GICv3 CPU interface registers
Implement the CPU interface registers for the GICv3; these are
CPU system registers, not MMIO registers.

This commit implements all the registers which are simple
accessors for GIC state, but not those which act as interfaces
for acknowledging, dismissing or generating interrupts. (Those
will be added in a later commit.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-16-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Peter Maydell c84428b33f hw/intc/arm_gicv3: Implement gicv3_set_irq()
Implement the code which updates the GIC state when an interrupt
input into the GIC is asserted.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-15-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Peter Maydell 287c181ae4 hw/intc/arm_gicv3: Wire up distributor and redistributor MMIO regions
Wire up the MMIO functions exposed by the distributor and the
redistributor into MMIO regions exposed by the GICv3 device.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-14-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Peter Maydell ce187c3c15 hw/intc/arm_gicv3: Implement functions to identify next pending irq
Implement the GICv3 logic to recalculate the highest priority pending
interrupt for each CPU after some part of the GIC state has changed.
We avoid unnecessary full recalculation where possible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1465915112-29272-11-git-send-email-peter.maydell@linaro.org
2016-06-17 15:23:51 +01:00
Shlomo Pongratz 56992670a4 hw/intc/arm_gicv3: ARM GICv3 device framework
This patch includes the device class itself, some ID register
value functions which will be needed by both distributor
and redistributor, and some skeleton functions for handling
interrupts coming in and going out, which will be filled in
in a subsequent patch.

Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1465915112-29272-10-git-send-email-peter.maydell@linaro.org
[PMM: pulled this patch earlier in the sequence, and left
 some code out of it for a later patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2016-06-17 15:23:51 +01:00