1) makes the public APIs in cipher-nettle/gcrypt/builtin static,
and rename them with "nettle/gcrypt/builtin" prefix.
2) introduces cipher framework, including QCryptoCipherDriver
and new public APIs.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extracts qcrypto_cipher_ctx_new() from qcrypto_cipher_new() for
nettle-backend impls.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactors the qcrypto_cipher_free(), splits it into two parts. One
is gcrypt/nettle__cipher_free_ctx() to free the special context.
This makes code more clear, what's more, it would be used by the
later patch.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Libgcrypt and nettle support 3des-ede, so this patch add 3des-ede
support when using libgcrypt or nettle.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On error path, ctx may be leaked. Assign ctx earlier, and call
qcrypto_cipher_free() on error.
Spotted thanks to ASAN.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce CTR mode support for the cipher APIs.
CTR mode uses a counter rather than a traditional IV.
The counter has additional properties, including a nonce
and initial counter block. We reuse the ctx->iv as
the counter for conveniences.
Both libgcrypt and nettle are support CTR mode, the
cipher-builtin doesn't support yet.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It can't guarantee all cipher modes are supported
if one cipher algorithm is supported by a backend.
Let's extend qcrypto_cipher_supports() to take both
the algorithm and mode as parameters.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Several error messages print out the raw enum value, which
is less than helpful to users, as these values are not
documented, nor stable across QEMU releases. Switch to use
the enum string instead.
The nettle impl also had two typos where it mistakenly
said "algorithm" instead of "mode", and actually reported
the algorithm value too.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XTS cipher mode needs to be used with a cipher which has
a block size of 16 bytes. If a mis-matching block size is used,
the code will either corrupt memory beyond the IV array, or
not fully encrypt/decrypt the IV.
This fixes a memory corruption crash when attempting to use
cast5-128 with xts, since the former has an 8 byte block size.
A test case is added to ensure the cipher creation fails with
such an invalid combination.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For versions of nettle < 3.0.0, the cipher functions took a
'void *ctx' and 'unsigned len' instad of 'const void *ctx'
and 'size_t len'. The xts functions though are builtin to
QEMU and always expect the latter signatures. Define a
second set of wrappers to use with the correct signatures
needed by XTS mode.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Prior to the nettle 3.0.0 release, the cast5_set_key function
was actually named cast128_set_key, so we must add a compatibility
definition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce 'XTS' as a permitted mode for the cipher APIs.
With XTS the key provided must be twice the size of the
key normally required for any given algorithm. This is
because the key will be split into two pieces for use
in XTS mode.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The built-in and nettle cipher backends for AES maintain
two separate AES contexts, one for encryption and one for
decryption. This is going to be inconvenient for the future
code dealing with XTS, so wrap them up in a single struct
so there is just one pointer to pass around for both
encryption and decryption.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New cipher algorithms 'twofish-128', 'twofish-192' and
'twofish-256' are defined for the Twofish algorithm.
The gcrypt backend does not support 'twofish-192'.
The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New cipher algorithms 'serpent-128', 'serpent-192' and
'serpent-256' are defined for the Serpent algorithm.
The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A new cipher algorithm 'cast-5-128' is defined for the
Cast-5 algorithm with 128 bit key size. Smaller key sizes
are supported by Cast-5, but nothing in QEMU should use
them, so only 128 bit keys are permitted.
The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-3-git-send-email-peter.maydell@linaro.org
When encrypting/decrypting data, the plaintext/ciphertext
buffers are required to be a multiple of the cipher block
size. If this is not done, nettle will abort and gcrypt
will report an error. To get consistent behaviour add
explicit checks upfront for the buffer sizes.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit d3462e3 broke qcow2's encryption functionality by using encrypt
instead of decrypt in the wrapper function it introduces. This was found
by qemu-iotests case 134.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Calling a function pointer that was cast from an incompatible function
results in undefined behavior. 'void *' isn't compatible with 'struct
XXX *', so we can't cast to nettle_cipher_func, but have to provide a
wrapper. (Conversion from 'void *' to 'struct XXX *' might require
computation, which won't be done if we drop argument's true type, and
pointers can have different sizes so passing arguments on stack would
bug.)
Having two different prototypes based on nettle version doesn't make
this solution any nicer.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1437062641-12684-3-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In nettle 3, cbc_encrypt() accepts 'nettle_cipher_func' instead of
'nettle_crypt_func' and these two differ in 'const' qualifier of the
first argument. The build fails with:
In file included from crypto/cipher.c:71:0:
./crypto/cipher-nettle.c: In function ‘qcrypto_cipher_encrypt’:
./crypto/cipher-nettle.c:154:38: error: passing argument 2 of
‘nettle_cbc_encrypt’ from incompatible pointer type
cbc_encrypt(ctx->ctx_encrypt, ctx->alg_encrypt,
^
In file included from ./crypto/cipher-nettle.c:24:0,
from crypto/cipher.c:71:
/usr/include/nettle/cbc.h:48:1: note: expected
‘void (*)(const void *, size_t, uint8_t *, const uint8_t *)
but argument is of type
‘void (*)( void *, size_t, uint8_t *, const uint8_t *)
To allow both versions, we switch to the new definition and #if typedef
it for old versions.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1436548682-9315-2-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we are linking to gnutls already and gnutls is built against
nettle, then we should use nettle as a cipher backend in
preference to our built-in backend.
This will be used when linking against some GNUTLS 2.x versions
and all GNUTLS 3.x versions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-7-git-send-email-berrange@redhat.com>
[Change "#elif" to "#elif defined". - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Markus Armbruster
Longpeng(Mike)
Marc-André Lureau
Gonglei
Daniel P. Berrange
Peter Maydell
Kevin Wolf
Radim Krčmář