Commit Graph

171 Commits

Author SHA1 Message Date
Max Reitz 69dca43d6b block: Use bdrv_default_perms()
bdrv_default_perms() can decide which permission profile to use based on
the BdrvChildRole, so block drivers do not need to select it explicitly.

The blkverify driver now no longer shares the WRITE permission for the
image to verify.  We thus have to adjust two places in
test-block-iothread not to take it.  (Note that in theory, blkverify
should behave like quorum in this regard and share neither WRITE nor
RESIZE for both of its children.  In practice, it does not really
matter, because blkverify is used only for debugging, so we might as
well keep its permissions rather liberal.)

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-30-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18 19:05:25 +02:00
Max Reitz 8b1869daad block: Make format drivers use child_of_bds
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the
BdrvChildRole; but there are exceptions for drivers with external data
files (qcow2 and vmdk).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-26-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18 19:05:25 +02:00
Max Reitz 258b776515 block: Add BdrvChildRole to BdrvChild
For now, it is always set to 0.  Later patches in this series will
ensure that all callers pass an appropriate combination of flags.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18 19:05:25 +02:00
Max Reitz d67066d8bc block: Add BlockDriver.is_format
We want to unify child_format and child_file at some point.  One of the
important things that set format drivers apart from other drivers is
that they do not expect other format nodes under them (except in the
backing chain), i.e. we must not probe formats inside of formats.  That
means we need something on which to distinguish format drivers from
others, and hence this flag.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18 19:05:25 +02:00
Eric Blake a3aeeab557 block: Add blk_new_with_bs() helper
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.

Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
 https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-05 13:17:36 +02:00
Kevin Wolf 7b8e485742 block: Add flags to bdrv(_co)_truncate()
Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-04-30 17:51:07 +02:00
Maxim Levitsky b92902dfea block: pass BlockDriver reference to the .bdrv_co_create
This will allow the reuse of a single generic .bdrv_co_create
implementation for several drivers.
No functional changes.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-26 14:44:33 +01:00
Max Reitz c80d8b06cf block: Add @exact parameter to bdrv_co_truncate()
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk.  Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.

This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around.  All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior.  Future patches take care
of that.

Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28 12:00:07 +01:00
Max Reitz 26536c7fc2 block: Do not truncate file node when formatting
There is no reason why the format drivers need to truncate the protocol
node when formatting it.  When using the old .bdrv_co_create_ops()
interface, the file will be created with no size option anyway, which
generally gives it a size of 0.  (Exceptions are block devices, which
cannot be truncated anyway.)

When using blockdev-create, the user must have given the file node some
size anyway, so there is no reason why we should override that.

qed is an exception, it needs the file to start completely empty (as
explained by c743849bee).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-4-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-28 11:59:57 +01:00
John Snow 197bfa7da7 block/qcow: Improve error when opening qcow2 files as qcow
Reported-by: radmehrsaeed7@gmail.com
Fixes: https://bugs.launchpad.net/bugs/1832914
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-08 16:00:26 +02:00
Kevin Wolf d861ab3acf block: Add BlockBackend.ctx
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).

The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Vladimir Sementsov-Ogievskiy 4ed3e0c486 block/qcow: use buffer-based io
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30 15:29:00 +02:00
Peter Maydell adf2e451f3 Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
 - bdrv_set_aio_context() related fixes
 - HMP snapshot commands: Use only tag, not the ID to identify snapshots
 - qmeu-img, commit: Error path fixes
 - block/nvme: Build fix for gcc 9
 - MAINTAINERS updates
 - Fix various issues with bdrv_refresh_filename()
 - Fix various iotests
 - Include LUKS overhead in qemu-img measure for qcow2
 - A fix for vmdk's image creation interface
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcc/knAAoJEH8JsnLIjy/WptQP/3F8Lh52H4egXaP7NUUuDjQM
 AhqhuDAp/EZBS+xim9kLTogNJADe/rMWdSX/YB5aLpSPYbjasC66NgaLhd6QewgQ
 VIcsLUdlYAyZ5ZjJytimfMTLwm1X02RmVIe55y52DTY8LlfViZzOlf3qwqPm00ao
 EJB2cl8UJLM+PVEu59cCw3R0/06LY+WIJRB32d3tnCBRTkaJwfR9h4lrp/juVcFZ
 U+2eWU68KMbUHSYiWANowN+KRV3uPY4HVA98v3F0vDmcBxlVHOeBg6S+PcT7tK8p
 huzCMwcdwUyPMJgVs/+WBtUnbG0jN6SHUYmFLz859UMVgBnCw5tzBMf8qw1wOA4A
 Iw+zor27Pxj4IlxcLPp5f97YZ8k9acdMR2VKPH6xLJZ1JF+sKa54RfzESd5EJeIj
 Mfcp773H0lIaWcFJ6RY1F0L1E1ta7QigwNBiWMdYfh0a0EWHnDvGyYeaSPYEQ+rl
 e8bZOcfrYwVI7DTDiZOIkGA9D8DXEPDNp+sl6s1DxeY69D0NNaXTtCPqFNNAbFbd
 20uD7yDRZlWq32cQB/K9D5cSkZRSOzdUpLfLU3nQU2+dz11x6OpM6m7DVboSrztD
 1HtPPDzDEvH5dOP7ibd60s+ntjkSiNfNkUgnuVrBE/d/PocC1eHHpZt5V7f43Ofb
 RxVwH5+smzQ9nsNBfQR0
 =gaah
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface

# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (71 commits)
  iotests: Skip 211 on insufficient memory
  vmdk: false positive of compat6 with hwversion not set
  iotests: add LUKS payload overhead to 178 qemu-img measure test
  qcow2: include LUKS payload overhead in qemu-img measure
  iotests.py: s/_/-/g on keys in qmp_log()
  iotests: Let 045 be run concurrently
  iotests: Filter SSH paths
  iotests.py: Filter filename in any string value
  iotests.py: Add is_str()
  iotests: Fix 207 to use QMP filters for qmp_log
  iotests: Fix 232 for LUKS
  iotests: Remove superfluous rm from 232
  iotests: Fix 237 for Python 2.x
  iotests: Re-add filename filters
  iotests: Test json:{} filenames of internal BDSs
  block: BDS options may lack the "driver" option
  block/null: Generate filename even with latency-ns
  block/curl: Implement bdrv_refresh_filename()
  block/curl: Harmonize option defaults
  block/nvme: Fix bdrv_refresh_filename()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-26 19:04:47 +00:00
Max Reitz 2654267cc1 block: Add strong_runtime_opts to BlockDriver
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.

Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:27 +01:00
Max Reitz 998c201923 block: Add BDS.auto_backing_file
If the backing file is overridden, this most probably does change the
guest-visible data of a BDS.  Therefore, we will need to consider this
in bdrv_refresh_filename().

To see whether it has been overridden, we might want to compare
bs->backing_file and bs->backing->bs->filename.  However,
bs->backing_file is changed by bdrv_set_backing_hd() (which is just used
to change the backing child at runtime, without modifying the image
header), so bs->backing_file most of the time simply contains a copy of
bs->backing->bs->filename anyway, so it is useless for such a
comparison.

This patch adds an auto_backing_file BDS field which contains the
backing file path as indicated by the image header, which is not changed
by bdrv_set_backing_hd().

Because of bdrv_refresh_filename() magic, however, a BDS's filename may
differ from what has been specified during bdrv_open().  Then, the
comparison between bs->auto_backing_file and bs->backing->bs->filename
may fail even though bs->backing was opened from bs->auto_backing_file.
To mitigate this, we can copy the real BDS's filename (after the whole
bdrv_open() and bdrv_refresh_filename() process) into
bs->auto_backing_file, if we know the former has been opened based on
the latter.  This is only possible if no options modifying the backing
file's behavior have been specified, though.  To simplify things, this
patch only copies the filename from the backing file if no options have
been specified for it at all.

Furthermore, there are cases where an overlay is created by qemu which
already contains a BDS's filename (e.g. in blockdev-snapshot-sync).  We
do not need to worry about updating the overlay's bs->auto_backing_file
there, because we actually wrote a post-bdrv_refresh_filename() filename
into the image header.

So all in all, there will be false negatives where (as of a future
patch) bdrv_refresh_filename() will assume that the backing file differs
from what was specified in the image header, even though it really does
not.  However, these cases should be limited to where (1) the user
actually did override something in the backing chain (e.g. by specifying
options for the backing file), or (2) the user executed a QMP command to
change some node's backing file (e.g. change-backing-file or
block-commit with @backing-file given) where the given filename does not
happen to coincide with qemu's idea of the backing BDS's filename.

Then again, (1) really is limited to -drive.  With -blockdev or
blockdev-add, you have to adhere to the schema, so a user cannot give
partial "unimportant" options (e.g. by just setting backing.node-name
and leaving the rest to the image header).  Therefore, trying to fix
this would mean trying to fix something for -drive only.

To improve on (2), we would need a full infrastructure to "canonicalize"
an arbitrary filename (+ options), so it can be compared against
another.  That seems a bit over the top, considering that filenames
nowadays are there mostly for the user's entertainment.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:25 +01:00
Vladimir Sementsov-Ogievskiy 30d780f8fe block/qcow: use qemu_iovec_init_buf
Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-9-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-9-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22 09:42:13 +00:00
Vladimir Sementsov-Ogievskiy c972fa123c crypto: support multiple threads accessing one QCryptoBlock
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Peter Maydell a5fdff18a7 block/qcow: Don't take address of fields in packed structs
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.

There are a few places where the in-place swap function is
used on something other than a packed struct field; we convert
those anyway, for consistency.

This patch was produced with the following spatch script:

@@
expression E;
@@
-be16_to_cpus(&E);
+E = be16_to_cpu(E);
@@
expression E;
@@
-be32_to_cpus(&E);
+E = be32_to_cpu(E);
@@
expression E;
@@
-be64_to_cpus(&E);
+E = be64_to_cpu(E);
@@
expression E;
@@
-cpu_to_be16s(&E);
+E = cpu_to_be16(E);
@@
expression E;
@@
-cpu_to_be32s(&E);
+E = cpu_to_be32(E);
@@
expression E;
@@
-cpu_to_be64s(&E);
+E = cpu_to_be64(E);

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-11-05 15:09:54 +01:00
KONRAD Frederic 41b6513436 qcow: fix a reference leak
Since 42a3e1ab36 qemu asserts when using the
vvfat driver:

git clone git://qemu.org/qemu.git
cd qemu
./configure --target-list=ppc-softmmu --enable-debug
make -j8
mkdir foo
touch foo/hello
./ppc-softmmu/qemu-system-ppc -M prep --nographic --monitor null             \
                              -hda fat:rw:./foo

"Ctrl-C"

qemu-system-ppc: block.c:3368: bdrv_close_all: Assertion                     \
   `((&all_bdrv_states)->tqh_first == ((void *)0))' failed.

This is because we reference bs twice in qcow_co_create(..) one time in
bdrv_open_blockdev_ref(..) and in blk_insert_bs(..) but we unref it only once
in blk_unref which leads to the reference leak.

Note that I didn't tested much QCOW after this change as I don't use it much.

Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-30 15:35:37 +02:00
Eric Blake 609841a3f8 qcow: Switch to a byte-based driver
We are gradually moving away from sector-based interfaces, towards
byte-based.  The qcow driver is now ready to fully utilize the
byte-based callback interface, as long as we override the default
alignment to still be 512 (needed at least for asserts present
because of encryption, but easier to do everywhere than to audit
which sub-sector requests are handled correctly, especially since
we no longer recommend qcow for new disk images).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-29 14:20:56 +02:00
Eric Blake d1326a786d qcow: Switch qcow_co_writev to byte-based calls
We are gradually moving away from sector-based interfaces, towards
byte-based.  Make the change for the internals of the qcow
driver write function, by iterating over offset/bytes instead of
sector_num/nb_sectors, and with a rename of index_in_cluster and
repurposing of n to track bytes instead of sectors.

A later patch will then switch the qcow driver as a whole over
to byte-based operation.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-29 14:20:56 +02:00
Eric Blake a15312b017 qcow: Switch qcow_co_readv to byte-based calls
We are gradually moving away from sector-based interfaces, towards
byte-based.  Make the change for the internals of the qcow
driver read function, by iterating over offset/bytes instead of
sector_num/nb_sectors, and with a rename of index_in_cluster and
repurposing of n to track bytes instead of sectors.

A later patch will then switch the qcow driver as a whole over
to byte-based operation.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-29 14:20:56 +02:00
Eric Blake 787993a543 qcow: Switch get_cluster_offset to be byte-based
We are gradually moving away from sector-based interfaces, towards
byte-based.  Make the change for the internal helper function
get_cluster_offset(), by changing n_start and n_end to be byte
offsets rather than sector indices within the cluster being
allocated.  However, assert that these values are still
sector-aligned (at least qcrypto_block_encrypt() still wants that).
For now we get that alignment for free because we still use
sector-based driver callbacks.

A later patch will then switch the qcow driver as a whole over
to byte-based operation; but will still leave things at sector
alignments as it is not worth auditing the qcow image format
to worry about sub-sector requests.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-29 14:20:56 +02:00
Markus Armbruster 796d323945 block/crypto: Simplify block_crypto_{open,create}_opts_init()
block_crypto_open_opts_init() and block_crypto_create_opts_init()
contain a virtual visit of QCryptoBlockOptions and
QCryptoBlockCreateOptions less member "format", respectively.

Change their callers to put member "format" in the QDict, so they can
use the generated visitors for these types instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-29 14:20:56 +02:00
Markus Armbruster af91062ee1 block: Factor out qobject_input_visitor_new_flat_confused()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Markus Armbruster 92adf9dbcd block: Clean up a misuse of qobject_to() in .bdrv_co_create_opts()
The following pattern occurs in the .bdrv_co_create_opts() methods of
parallels, qcow, qcow2, qed, vhdx and vpc:

    qobj = qdict_crumple_for_keyval_qiv(qdict, errp);
    qobject_unref(qdict);
    qdict = qobject_to(QDict, qobj);
    if (qdict == NULL) {
         ret = -EINVAL;
         goto done;
    }

    v = qobject_input_visitor_new_keyval(QOBJECT(qdict));
    [...]
    ret = 0;
done:
    qobject_unref(qdict);
    [...]
    return ret;

If qobject_to() fails, we return failure without setting errp.  That's
wrong.  As far as I can tell, it cannot fail here.  Clean it up
anyway, by removing the useless conversion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Markus Armbruster e5af0da1dc block: Fix -blockdev for certain non-string scalars
Configuration flows through the block subsystem in a rather peculiar
way.  Configuration made with -drive enters it as QemuOpts.
Configuration made with -blockdev / blockdev-add enters it as QAPI
type BlockdevOptions.  The block subsystem uses QDict, QemuOpts and
QAPI types internally.  The precise flow is next to impossible to
explain (I tried for this commit message, but gave up after wasting
several hours).  What I can explain is a flaw in the BlockDriver
interface that leads to this bug:

    $ qemu-system-x86_64 -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234
    qemu-system-x86_64: -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234: Internal error: parameter user invalid

QMP blockdev-add is broken the same way.

Here's what happens.  The block layer passes configuration represented
as flat QDict (with dotted keys) to BlockDriver methods
.bdrv_file_open().  The QDict's members are typed according to the
QAPI schema.

nfs_file_open() converts it to QAPI type BlockdevOptionsNfs, with
qdict_crumple() and a qobject input visitor.

This visitor comes in two flavors.  The plain flavor requires scalars
to be typed according to the QAPI schema.  That's the case here.  The
keyval flavor requires string scalars.  That's not the case here.
nfs_file_open() uses the latter, and promptly falls apart for members
@user, @group, @tcp-syn-count, @readahead-size, @page-cache-size,
@debug.

Switching to the plain flavor would fix -blockdev, but break -drive,
because there the scalars arrive in nfs_file_open() as strings.

The proper fix would be to replace the QDict by QAPI type
BlockdevOptions in the BlockDriver interface.  Sadly, that's beyond my
reach right now.

Next best would be to fix the block layer to always pass correctly
typed QDicts to the BlockDriver methods.  Also beyond my reach.

What I can do is throw another hack onto the pile: have
nfs_file_open() convert all members to string, so use of the keyval
flavor actually works, by replacing qdict_crumple() by new function
qdict_crumple_for_keyval_qiv().

The pattern "pass result of qdict_crumple() to
qobject_input_visitor_new_keyval()" occurs several times more:

* qemu_rbd_open()

  Same issue as nfs_file_open(), but since BlockdevOptionsRbd has only
  string members, its only a latent bug.  Fix it anyway.

* parallels_co_create_opts(), qcow_co_create_opts(),
  qcow2_co_create_opts(), bdrv_qed_co_create_opts(),
  sd_co_create_opts(), vhdx_co_create_opts(), vpc_co_create_opts()

  These work, because they create the QDict with
  qemu_opts_to_qdict_filtered(), which creates only string scalars.
  The function sports a TODO comment asking for better typing; that's
  going to be fun.  Use qdict_crumple_for_keyval_qiv() to be safe.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Max Reitz 609f45ea95 block: Add block-specific QDict header
There are numerous QDict functions that have been introduced for and are
used only by the block layer.  Move their declarations into an own
header file to reflect that.

While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them.  Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-15 14:49:44 +02:00
Michael S. Tsirkin 0d8c41dae5 block: use local path for local headers
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-05-31 04:16:06 +03:00
Eric Blake e18a58b4e3 block: Merge .bdrv_co_writev{,_flags} in drivers
We have too many driver callback interfaces; simplify the mess
somewhat by merging the flags parameter of .bdrv_co_writev_flags()
into .bdrv_co_writev().  Note that as long as a driver doesn't set
.supported_write_flags, the flags argument will be 0 and behavior is
identical.  Also note that the public function bdrv_co_writev() still
lacks a flags argument; so the driver signature is thus intentionally
slightly different.  But that's not the end of the world, nor the first
time that the driver interface differs slightly from the public
interface.

Ideally, we should be rewriting all of these drivers to use modern
byte-based interfaces.  But that's a more invasive patch to write
and audit, compared to the simplification done here.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-15 16:11:41 +02:00
Marc-André Lureau cb3e7f08ae qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked().  Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Max Reitz 7dc847ebba qapi: Replace qobject_to_X(o) by qobject_to(X, o)
This patch was generated using the following Coccinelle script:

@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)

and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Kevin Wolf 42a3e1ab36 qcow: Support .bdrv_co_create
This adds the .bdrv_co_create driver callback to qcow, which
enables image creation over QMP.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-03-19 12:01:39 +01:00
Stefan Hajnoczi efc75e2a4c block: rename .bdrv_create() to .bdrv_co_create_opts()
BlockDriver->bdrv_create() has been called from coroutine context since
commit 5b7e1542cf ("block: make
bdrv_create adopt coroutine").

Make this explicit by renaming to .bdrv_co_create_opts() and add the
coroutine_fn annotation.  This makes it obvious to block driver authors
that they may yield, use CoMutex, or other coroutine_fn APIs.
bdrv_co_create is reserved for the QAPI-based version that Kevin is
working on.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170705102231.20711-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02 18:39:07 +01:00
Eric Blake d63b4c93e3 qcow: Switch to .bdrv_co_block_status()
We are gradually moving away from sector-based interfaces, towards
byte-based.  Update the qcow driver accordingly.  There is no
intent to optimize based on the want_zero flag for this format.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02 18:39:07 +01:00
Markus Armbruster 922a01a013 Move include qemu/option.h from qemu-common.h to actual users
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09 13:52:16 +01:00
Markus Armbruster 452fcdbc49 Include qapi/qmp/qdict.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster a82400cf5c Drop superfluous includes of qapi/qmp/qerror.h
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
2018-02-09 13:51:35 +01:00
Max Reitz 0abb1475f8 block/qcow: Add blkdebug events
This is not necessarily complete, but it should include the most
important places.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-01-23 12:34:43 +01:00
Daniel P. Berrange 4609742a49 block: convert qcrypto_block_encrypt|decrypt to take bytes offset
Instead of sector offset, take the bytes offset when encrypting
or decrypting data.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-6-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-10-06 16:30:47 +02:00
Eric Blake d7a753a148 qcow: Check failure of bdrv_getlength() and bdrv_truncate()
Omitting the check for whether bdrv_getlength() and bdrv_truncate()
failed meant that it was theoretically possible to return an
incorrect offset to the caller.  More likely, conditions for either
of these functions to fail would also cause one of our other calls
(such as bdrv_pread() or bdrv_pwrite_sync()) to also fail, but
auditing that we are safe is difficult compared to just patching
things to always forward on the error rather than ignoring it.

Use osdep.h macros instead of open-coded rounding while in the
area.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04 18:33:00 +02:00
Eric Blake 56439e9d55 qcow: Change signature of get_cluster_offset()
The old signature has an ambiguous meaning for a return of 0:
either no allocation was requested or necessary, or an error
occurred (but any errno associated with the error is lost to
the caller, which then has to assume EIO).

Better is to follow the example of qcow2, by changing the
signature to have a separate return value that cleanly
distinguishes between failure and success, along with a
parameter that cleanly holds a 64-bit value.  Then update all
callers.

While auditing that all return paths return a negative errno
(rather than -1), I also simplified places where we can pass
NULL rather than a local Error that just gets thrown away.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04 18:33:00 +02:00
Alberto Garcia c3a8fe331e misc: Remove unused Error variables
There's a few cases which we're passing an Error pointer to a function
only to discard it immediately afterwards without checking it. In
these cases we can simply remove the variable and pass NULL instead.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170829120836.16091-1-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-30 11:58:26 +01:00
Daniel P. Berrange 0696ae2c92 qcow: fix memory leaks related to encryption
Fix leak of the 'encryptopts' string, which was mistakenly
declared const.

Fix leak of QemuOpts entry which should not have been deleted
from the opts array.

Reported by: coverity
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170714103105.5781-1-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-25 16:33:31 +02:00
Max Reitz 3a691c50f1 block: Add PreallocMode to blk_truncate()
blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Max Reitz 7ea37c3066 block: Add PreallocMode to bdrv_truncate()
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Daniel P. Berrange 1cd9a787a2 block: pass option prefix down to crypto layer
While the crypto layer uses a fixed option name "key-secret",
the upper block layer may have a prefix on the options. e.g.
"encrypt.key-secret", in order to avoid clashes between crypto
option names & other block option names. To ensure the crypto
layer can report accurate error messages, we must tell it what
option name prefix was used.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-19-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Daniel P. Berrange c01c214b69 block: remove all encryption handling APIs
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Daniel P. Berrange d85f4222b4 qcow: convert QCow to use QCryptoBlock for encryption
This converts the qcow driver to make use of the QCryptoBlock
APIs for encrypting image content. This is only wired up to
permit use of the legacy QCow encryption format. Users who wish
to have the strong LUKS format should switch to qcow2 instead.

With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.

  $QEMU \
    -object secret,id=sec0,file=/home/berrange/encrypted.pw \
    -drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\
           encrypt.key-secret=sec0

Though note that running QEMU system emulators with the AES
encryption is no longer supported, so while the above syntax
is valid, QEMU will refuse to actually run the VM in this
particular example.

Likewise when creating images with the legacy AES-CBC format

  qemu-img create -f qcow \
    --object secret,id=sec0,file=/home/berrange/encrypted.pw \
    -o encrypt.format=aes,encrypt.key-secret=sec0 \
    /home/berrange/encrypted.qcow 64M

Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-10-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Daniel P. Berrange 1fad1f9400 qcow: make encrypt_sectors encrypt in place
Instead of requiring separate input/output buffers for
encrypting data, change encrypt_sectors() to assume
use of a single buffer, encrypting in place. One current
caller uses the same buffer for input/output already
and the other two callers are easily converted to do so.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-9-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00