Without this, we just dirty a single byte, and so if the caller writes
more than one byte to the host memory then we won't have invalidated any
translation blocks that start after the first byte and overlap those
writes. In particular, AArch64's DC ZVA implementation uses probe_access
(via probe_write), and so we don't invalidate the entire block, only the
TB overlapping the first byte (and, in the unusual case an unaligned VA
is given to the instruction, we also probe that specific address in
order to get the right VA reported on an exception, so will invalidate a
TB overlapping that address too). Since our IC IVAU implementation is a
no-op for system emulation that relies on the softmmu already having
detected self-modifying code via this mechanism, this means we have
observably wrong behaviour when jumping to code that has been DC ZVA'ed.
In practice this is an unusual thing for software to do, as in reality
the OS will DC ZVA the page and the application will go and write actual
instructions to it that aren't UDF #0, but you can write a test that
clearly shows the faulty behaviour.
For functions other than probe_access it's not clear what size to use
when 0 is passed in. Arguably a size of 0 shouldn't dirty at all, since
if you want to actually write then you should pass in a real size, but I
have conservatively kept the implementation as dirtying the first byte
in that case so as to avoid breaking any assumptions about that
behaviour.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20231104031232.3246614-1-jrtc27@jrtc27.com>
[rth: Move the dirtysize computation next to notdirty_write.]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In cpu_exec_step_atomic, we did not set CF_LAST_IO, which lead
to a loop with cpu_io_recompile.
But since 18a536f1f8 ("Always require can_do_io") we no longer
need a flag to indicate when the last insn should have can_do_io set,
so remove the flag entirely.
Reported-by: Clément Chigot <chigot@adacore.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1961
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Factor the TCG specific code from cpu_common_reset_hold() to
tcg_cpu_reset_hold() within tcg-accel-ops.c. Since this file
is sysemu specific, we can inline tcg_flush_softmmu_tlb(),
removing its declaration in "exec/cpu-common.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-4-philmd@linaro.org>
Introduce cpu_exec_reset_hold() which call an accelerator
specific AccelOpsClass::cpu_reset_hold() handler.
Define a stub on TCG user emulation, because CPU reset is
irrelevant there.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-3-philmd@linaro.org>
"exec/cpu-common.h" is meant to contain the declarations
related to CPU usable with any accelerator / target
combination.
tcg_flush_jmp_cache() is specific to TCG, so restrict its
declaration by moving it to "exec/tb-flush.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-2-philmd@linaro.org>
Store bytes under a mask is fundamentally a cmpxchg, not a straight store.
Use HAVE_CMPXCHG128 instead of HAVE_ATOMIC128_RW.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-8-richard.henderson@linaro.org>
We handled the HAVE_ATOMIC128_RW case with atomic16_set at the top of
the function; the only thing left for a host without that support is
to fall through to cpu_loop_exit_atomic.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-7-richard.henderson@linaro.org>
Move all of it into accel/tcg/monitor.c. This puts everything
about tcg that is only used by the monitor in the same place.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
copy_call() has an unused parameter so remove it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231019101030.128431-7-akihiko.odaki@daynix.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231029145033.592566-19-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Translation logic may partially decode an instruction, then abort and
remove the instruction from the TB. This can happen for example when an
instruction spans two pages. In this case, plugins may get an incorrect
result when calling qemu_plugin_tb_n_insns to query for the number of
instructions in the TB. This patch updates plugin_gen_tb_end to set the
final instruction count.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
[AJB: added g_assert to defed API]
Message-Id: <CADc=-s5RwGViNTR-h5cq3np673W3RRFfhr4vCGJp0EoDUxvhog@mail.gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-23-alex.bennee@linaro.org>
The softmmu/ directory contains files specific to system
emulation. Rename it as system/. Update meson rules, the
MAINTAINERS file and all the documentation and comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend. The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can load tcg_ctx just as easily within the callee.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_in_serial_context() is not target specific,
move it declaration to "internal-common.h" (which
we include in the 4 source files modified).
Remove the unused "exec/exec-all.h" header from
cpu-exec-common.c. There is no more target specific
code in this file: make it target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-12-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the unused "exec/exec-all.h" header. There is
no more target specific code in it: make it target
agnostic (rename using the '-common' suffix). Since
it is TCG specific, move it to accel/tcg, updating
MAINTAINERS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-11-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target-agnostic declarations from "internal-target.h"
to a new "internal-common.h" header.
monitor.c now don't include target specific headers and can
be compiled once in system_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg/internal.h contains target specific declarations.
Unit files including it become "target tainted": they can not
be compiled as target agnostic. Rename using the '-target'
suffix to make this explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 00c9a5c2c3 ("accel/tcg: Restrict 'qapi-commands-machine.h'
to system emulation") we moved the definition to accel/tcg/ which is
where this function is called. No need to expose it outside.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A large chunk of ld/st functions are moved from cputlb.c and user-exec.c
to ldst_common.c.inc as their implementation is the same between both
modes.
Eventually, ldst_common.c.inc could be compiled into a separate
target-specific compilation unit, and be linked in with the targets.
Keeping CPUArchState usage out of cputlb.c (CPUArchState is primarily
used to access the mmu index in these functions).
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-12-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The prototype of do_[st|ld]*_mmu() is unified between system- and
user-mode allowing a large chunk of helper_[st|ld]*() and cpu_[st|ld]*()
functions to be expressed in same manner between both modes. These
functions will be moved to ldst_common.c.inc in a following commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-11-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes ldst_atomicity.c.inc almost target-independent, with the exception
of TARGET_PAGE_MASK, which will be addressed in a future patch.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-8-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The goal is to (in the future) allow for per-target compilation of
functions in atomic_template.h whilst atomic_mmu_lookup() and cputlb.c
are compiled once-per user- or system mode.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-7-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_[ld|st]*() and mmu_lookup*() are changed to use CPUState over
CPUArchState, moving the target-dependence to the target-facing facing
cpu_[ld|st] functions.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-6-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb; cpu_env instead of env_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_internal() is changed to instead take the generic CPUState
over CPUArchState, in order to lessen the target-specific coupling of
cputlb.c. Note: probe_access*() also don't need the full CPUArchState,
but aren't touched in this patch as they are target-facing.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-5-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes tlb_*() functions to take CPUState instead of CPUArchState, as
they don't require the full CPUArchState. This makes it easier to
decouple target-(in)dependent code.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-4-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that there is no padding between CPUNegativeOffsetState
and CPUArchState, this value is constant across all targets.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that CPUNegativeOffsetState is part of CPUState,
we can reference it directly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Minimize the displacement to can_do_io, since it may
be touched at the start of each TranslationBlock.
It fits into other padding within the substructure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't need to expose these TCG-specific methods to the
whole code base. Register them as AccelClass handlers, they
will be called by the generic accel_cpu_[un]realize() methods.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20231003123026.99229-8-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have tcg_exec_realizefn() return
a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20231003123026.99229-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix:
tcg/tcg.c:2551:27: error: declaration shadows a local variable [-Werror,-Wshadow]
MemOp op = get_memop(oi);
^
tcg/tcg.c:2437:12: note: previous declaration is here
TCGOp *op;
^
accel/tcg/tb-maint.c:245:18: error: declaration shadows a local variable [-Werror,-Wshadow]
for (int i = 0; i < V_L2_SIZE; i++) {
^
accel/tcg/tb-maint.c:210:9: note: previous declaration is here
int i;
^
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-2-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Require i/o as the last insn of a TranslationBlock always,
not only with icount. This is required for i/o that alters
the address space, such as a pci config space write.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1866
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Without this we can get see loops through cpu_io_recompile,
in which the cpu makes no progress.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize can_do_io to true if this the TB has CF_LAST_IO
and will consist of a single instruction. This avoids a
set to 0 followed immediately by a set to 1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify translator_io_start by recording the current
known value of can_do_io within DisasContextBase.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The condition checked is loop invariant; check it only once.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With CF_NOIRQ and without !CF_USE_ICOUNT, the load isn't used.
Avoid emitting it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
enable_cpu_pm is only used by softmmu-specific code, namely target/i386/host-cpu.c
and target/i386/kvm/*. It does not need a stub definition anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out int_st_mmio_leN, to be used by both do_st_mmio_leN
and do_st16_mmio_leN. Move the locks down into the two
functions, since each one now covers all accesses to once page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out int_ld_mmio_beN, to be used by both do_ld_mmio_beN
and do_ld16_mmio_beN. Move the locks down into the two
functions, since each one now covers all accesses to once page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid multiple calls to io_prepare for unaligned acceses.
One call to do_st_mmio_leN will never cross pages.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid multiple calls to io_prepare for unaligned acceses.
One call to do_ld_mmio_beN will never cross pages.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Push computation down into the if statements to the point
the data is used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
