We're getting a ridiculous number of child classes of
TestInitiallyFilled and TestInitiallyEmpty that differ only in a few
attributes that we want to test in all combinations.
Instead of explicitly writing down every combination, let's use a loop
and create those classes dynamically.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190805113526.20319-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Perform two guest writes to not yet backed up areas of an image, where
the former touches an inner area of the latter.
Before HEAD^, copy offloading broke this in two ways:
(1) The target image differs from the reference image (what the source
was when the backup started).
(2) But you will not see that in the failing output, because the job
offset is reported as being greater than the job length. This is
because one cluster is copied twice, and thus accounted for twice,
but of course the job length does not increase.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190801173900.23851-3-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch "iotests: Set read-zeroes on in null block driver for Valgrind"
with the commit ID a6862418fe needs the change in 051.out when
compared against on the s390 system.
Fixes: a6862418fe
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While older toolchains produced binaries where the physical load address
of ELF segments was the same as the virtual address, newer versions seem
to choose a different physical address if it isn't specified explicitly.
The means that the test kernel doesn't use the right addresses to access
e.g. format strings any more and the whole output disappears, causing
all test cases to fail.
Fix this by specifying the physical load address of sections explicitly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since docker caches the different layers, updating the package
list does not invalidate the previous "apt-get update" layer,
and it is likely "apt-get install" hits an outdated repository.
See commit beac6a98f6 and
https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#apt-get
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190723141528.18023-1-philmd@redhat.com>
[AJB: manually applies and fixed up]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The 'seq' command is not available by default on OpenBSD, so these
iotests are currently failing there. It could be installed as 'gseq'
from the coreutils package - but since it is using a different name
there and we are running the iotests with the "bash" shell anyway,
let's simply use the built-in double parentheses for the for-loops
instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190723111201.1926-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Remove some more tests from the "auto" group that either have issues
in certain environments (like macOS or FreeBSD, or on certain file systems
like ZFS or tmpfs), do not work with the qcow2 format, or that are simply
taking too much time.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190717111947.30356-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The regular expressions in the "check" script currently expect that there
is always a space after the test number in the group file, so you can't
have a test in there without a group unless the line still ends with a
space - which is quite error prone since some editors might remove spaces
at the end of lines automatically.
Thus let's fix the regular expressions so that it is also possible to
have lines with one test number only in the group file.
Suggested-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190717111947.30356-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's very confusing when things work in the debug shell because the
environment is different from what the test is running. Fix this by
ensuring we only have the inherited environment from the run shell.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The NSIS installer generates an executable suitable to install
QEMU on Windows.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190715174817.18981-9-philmd@redhat.com>
[AJB: also --enable-docs in configure step]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The 'makeinfo' is required to generate the documentation from
the 'html' Makefile rule (called by 'install-doc').
The NSIS installer uses these files.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190715174817.18981-6-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This silents a bunch of warnings while compiling the Slirp objects:
$ make
[...]
CC slirp/src/tftp.o
Package glib-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'glib-2.0' found
CC slirp/src/udp6.o
Package glib-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib-2.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'glib-2.0' found
[...]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190715174817.18981-5-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since commit 5f71eac06e the Sphinx tool is required
to build the rST documentation.
This fixes:
$ ./configure --enable-docs
ERROR: User requested feature docs
configure was not able to find it.
Install texinfo, Perl/perl-podlators and python-sphinx
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190715174817.18981-3-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
While fixing up pkg.mxe.cc they move the URLs around a bit and dropped
Jessie support in favour of Stretch. We also need to update the keys
used to verify the packages.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Quite often the information about which test failed is hidden by the
wall of repeated failures for each page. Stop outputting the error
after 10 bad pages and just summarise the total damage at the end.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
We correctly use the DEBIAN_FRONTEND environment variable on
the Debian images, but forgot the Ubuntu ones are based on it.
Since building docker images is not interactive, we need to
inform the APT tools about it using the DEBIAN_FRONTEND
environment variable (we already use it on our Debian images).
This fixes:
$ make docker-image-ubuntu V=1
[...]
Setting up tzdata (2019b-0ubuntu0.19.04) ...
debconf: unable to initialize frontend: Dialog
debconf: (TERM is not set, so the dialog frontend is not usable.)
debconf: falling back to frontend: Readline
Configuring tzdata
------------------
Please select the geographic area in which you live. Subsequent configuration
questions will narrow this down by presenting a list of cities, representing
the time zones in which they are located.
1. Africa 4. Australia 7. Atlantic 10. Pacific 13. Etc
2. America 5. Arctic 8. Europe 11. SystemV
3. Antarctica 6. Asia 9. Indian 12. US
Geographic area: 12
[HANG]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190711124805.26476-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since commit 5f71eac06e the Sphinx tool is required
to build the rST documentation.
This fixes:
$ ./configure --enable-docs
ERROR: User requested feature docs
configure was not able to find it.
Install texinfo, Perl/perl-podlators and python-sphinx
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190711102710.2263-1-philmd@redhat.com>
[AJB: also add /usr/libexec/python3-sphinx/ to PATH]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since commit 5f71eac06e the Sphinx tool is required
to build the rST documentation.
This fixes:
$ ./configure --enable-docs
ERROR: User requested feature docs
configure was not able to find it.
Install texinfo, Perl/perl-podlators and python-sphinx
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190711120609.12773-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Add yet another test type so we cna quickly exercise the miscellaneous
build products of the build system under various docer configurations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
mtree" that has been lingering for too long.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl0yOgoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmdwf/WM4Su7hXnyp34Z6lcT4Wq25qb397
Bmv3GSqA94Ex3mUAFPx8+PyF1KVxRGsFuobxZ9KartPt7VwLFONApN6D+Ul1GXMn
aSZ/eR9K7GCdrjVCKMSEtIX2KSgyrAhNIKVF61DjWCGXXYVXllqbtaaCHAkl012g
JR5nlCqRTYqODgwhkynoqNtq13gkRokiAO0BMsk3xwzJ9UO6aOIu71TtFy3jsUn5
ff0Mm4G6SEP9IIAC3L9lbwZvEArnWbJlL7X1j5C1tbid+Gx5b/W5CWDWO84idZZh
FctkRgCPoVHucQYZh+OdAveWuN24tBLfA1a4zu4vSKNkTKS/SHb5YpSXAA==
=nIGk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Mostly bugfixes, plus a patch to mark accelerator MemoryRegions in "info
mtree" that has been lingering for too long.
# gpg: Signature made Fri 19 Jul 2019 22:45:46 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
target/i386: sev: fix failed message typos
i386: indicate that 'pconfig' feature was removed intentionally
build-sys: do no support modules on Windows
qmp: don't emit the RESET event on wakeup
hmp: Print if memory section is registered with an accelerator
test-bitmap: add test for bitmap_set
scsi-generic: Check sense key before request snooping and patching
vhost-user-scsi: Call virtio_scsi_common_unrealize() when device realize failed
vhost-scsi: Call virtio_scsi_common_unrealize() when device realize failed
virtio-scsi: remove unused argument to virtio_scsi_common_realize
target/i386: skip KVM_GET/SET_NESTED_STATE if VMX disabled, or for SVM
target/i386: kvm: Demand nested migration kernel capabilities only when vCPU may have enabled VMX
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test for bitmap_set. There are three cases:
* Both start and end is BITS_PER_LONG aligned
* Only start is BITS_PER_LONG aligned
* Only end is BITS_PER_LONG aligned
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718010456.4234-3-richardw.yang@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When qemu quits, all throttling should be ignored. That means, if there
is a mirror job running from a throttled node, it should be cancelled
immediately and qemu close without blocking.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before the previous patches, the first case resulted in a failed
assertion (which is noted as qemu receiving a SIGABRT in the test
output), and the second usually triggered a segmentation fault.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a test has issued a quit command already (which may be useful to do
explicitly because the test wants to show its effects),
QEMUMachine.shutdown() should not do so again. Otherwise, the VM may
well return an ECONNRESET which will lead QEMUMachine.shutdown() to
killing it, which then turns into a "qemu received signal 9" line.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When changing a node's AioContext, the caller must acquire the old
AioContext (unless it currently runs in that old context). Therefore,
unless the node currently is in the main context, we always have to
acquire the old context around calls that may change a node's
AioContext.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Valgrind tool reports about the uninitialised buffer 'buf'
instantiated on the stack of the function guess_disk_lchs().
Pass 'read-zeroes=on' to the null block driver to make it deterministic.
The output of the tests 051, 186 and 227 now includes the parameter
'read-zeroes'. So, the benchmark output files are being changed too.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Fixes for the NVMe block driver, the gluster block driver, and for
running multiple block jobs concurrently on a single chain
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl0shO8SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AO3kIAKu5HCVcA3XnDlWGAzhtLxkaMb+KR+7V
qiN/YvZ5ECAVsh4gwpZkUlt2VEZEzKV8YCSZ6mFaE8zlFN4ujAq2S03ok7xxR6xP
JGf3cwhNgnIpJ3juYARe2l8o+zREt6Y6ImFcydMEkuFZBoYsvSWOYEIy+ACxlLKc
m54+w6590P1wpk3mlEGKm2hB9/1kSCDv/6LS1ig2Cv2T2U/VigZ9eGkKfVE5bWb4
4fc8Qxnde+ZDnzmhcd+hN/7epyASptMQzywJuFraspxSHhsQvOX3joIMSY3A3QXl
rmttuWctOGT7pgRoC6j+JsdFuNFn6AwRaewL6DtE9c6gKk2n4bcWs6s=
=+FyQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-07-15' into staging
Block patches for 4.1-rc1:
- Fixes for the NVMe block driver, the gluster block driver, and for
running multiple block jobs concurrently on a single chain
# gpg: Signature made Mon 15 Jul 2019 14:51:43 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-07-15:
gluster: fix .bdrv_reopen_prepare when backing file is a JSON object
iotests: Add read-only test case to 030
iotests: Add new case to 030
iotests: Add @use_log to VM.run_job()
iotests: Compare error messages in 030
iotests: Fix throttling in 030
block: Deep-clear inherits_from
block/stream: Swap backing file change order
block/stream: Fix error path
block: Add BDS.never_freeze
nvme: Set number of queues later in nvme_init()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tests that the stream job exits cleanly (without abort) when the
top node is read-only and cannot be reopened read/write.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190703172813.6868-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We recently removed the dependency of the stream job on its base node.
That makes it OK to use a commit filter node there. Test that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190703172813.6868-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
unittest-style tests generally do not use the log file, but VM.run_job()
can still be useful to them. Add a parameter to it that hides its
output from the log file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190703172813.6868-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, 030 just compares the error class, which does not say
anything.
Before HEAD^ added throttling to test_overlapping_4, that test actually
usually failed because node2 was already gone, not because it was the
commit and stream job were not allowed to overlap.
Prevent such problems in the future by comparing the error description
instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190703172813.6868-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, TestParallelOps in 030 creates images that are too small for
job throttling to be effective. This is reflected by the fact that it
never undoes the throttling.
Increase the image size and undo the throttling when the job should be
completed. Also, add throttling in test_overlapping_4, or the jobs may
not be so overlapping after all. In fact, the error usually emitted
here is that node2 simply does not exist, not that overlapping jobs are
not allowed -- the fact that this job ignores the exact error messages
and just checks the error class is something that should be fixed in a
follow-up patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190703172813.6868-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
These helpers copy the source bitmap to destination bitmap with a
shift either on the src or dst bitmap.
Meanwhile, we never have bitmap tests but we should.
This patch also introduces the initial test cases for utils/bitmap.c
but it only tests the newly introduced functions.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190603065056.25211-5-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
Bitmap test used sizeof(unsigned long) instead of BITS_PER_LONG.
We would need _str ones on the next patch.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A bunch of fixes all over the place.
ACPI tests will now run on more systems: might
introduce new failure reports but that's for
the best, isn't it?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdKJ/kAAoJECgfDbjSjVRp4dUH/A/eeIm24ul74NRnQHzsiL7F
duiFhPcnGhMYdTFbrV/vCAenaGR5eBl10XwVHeMEFC1ltIpwc3erdFotRp3WhOzo
P57ZpqCKr6G8MayhSSTAiNq6GJrQlQ2/eF5TSZlo6kpfP3MDYDS9W/C4Zlp52f0Y
sxvB49zXytMOJHlM0JqtiMuOfTftn+1GdEzfylJlSX0P3mKmYZG9l2++ByLoKQWd
8TNdTdGGV3go/xJ3rjmZTTLAS+rEuclVvfSXX6Y1RdGwUxmqZI/JxKmtt9eRRDdw
896p5dfYbxIGk3kOatfLfCEIBu6EcpvxwKMbbULYibITn939uNZX6rn4bI6FD9I=
=BUdh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc, pci: fixes, cleanups, tests
A bunch of fixes all over the place.
ACPI tests will now run on more systems: might
introduce new failure reports but that's for
the best, isn't it?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 12 Jul 2019 15:57:40 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio pmem: remove transitional names
virtio pmem: remove memdev null check
virtio pmem: fix wrong mem region condition
tests: acpi: do not skip tests when IASL is not installed
tests: acpi: do not require IASL for dumping AML blobs
virtio-balloon: fix QEMU 4.0 config size migration incompatibility
pcie: consistent names for function args
xio3130_downstream: typo fix
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tests do binary comparision so we can check tables without
IASL. Move IASL condition right before decompilation step
and skip it if IASL is not installed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190708092410.11167-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IASL isn't needed when dumping ACPI tables from guest for
rebuild purposes. So move this part out from IASL branch.
Makes rebuild-expected-aml.sh work without IASL installed
on host.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20190708092410.11167-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A recent tweak to the '-o help' output for qemu-img needs to be
reflected into the iotests expected outputs.
Fixes: f7077c98
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A side effect of piping the output to head is squash the exit status
of the diff command. Fix this by only doing the pipe if the diff
failed and then ensuring the status is non-zero.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We never shipped the reference data in the source tree because it's
quite big (64M). As a result the only option is to generate it
locally. Although we have a rule to generate the reference file we
missed the dependency and location changes, probably because it's only
run for SLOW test runs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The test aarch64 kernel is in an array defined with
unsigned char aarch64_kernel[] = { [...] }
which means it could be any size; currently it's quite small.
However we write it to a file using init_bootfile(), which
writes exactly 512 bytes to the file. This will break if
we ever end up with a kernel larger than that, and will
read garbage off the end of the array in the current setup
where the kernel is smaller.
Make init_bootfile() take an argument giving the length of
the data to write. This allows us to use it for all architectures
(previously s390 had a special-purpose init_bootfile_s390x
which hardcoded the file to write so it could write the
correct length). We assert that the x86 bootfile really is
exactly 512 bytes as it should be (and as we were previously
just assuming it was).
This was detected by the clang-7 asan:
==15607==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55a796f51d20 at pc 0x55a796b89c2f bp 0x7ffc58e89160 sp 0x7ffc58e88908
READ of size 512 at 0x55a796f51d20 thread T0
#0 0x55a796b89c2e in fwrite (/home/petmay01/linaro/qemu-from-laptop/qemu/build/sanitizers/tests/migration-test+0xb0c2e)
#1 0x55a796c46492 in init_bootfile /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:99:5
#2 0x55a796c46492 in test_migrate_start /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:593
#3 0x55a796c44101 in test_baddest /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:854:9
#4 0x7f906ffd3cc9 (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72cc9)
#5 0x7f906ffd3bfa (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72bfa)
#6 0x7f906ffd3bfa (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72bfa)
#7 0x7f906ffd3ea1 in g_test_run_suite (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72ea1)
#8 0x7f906ffd3ec0 in g_test_run (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x72ec0)
#9 0x55a796c43707 in main /home/petmay01/linaro/qemu-from-laptop/qemu/tests/migration-test.c:1187:11
#10 0x7f906e9abb96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#11 0x55a796b6c2d9 in _start (/home/petmay01/linaro/qemu-from-laptop/qemu/build/sanitizers/tests/migration-test+0x932d9)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702150311.20467-1-peter.maydell@linaro.org
it will test preferred memdev option more extensively and remove
undesired deprecation warnings during 'make check'
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190702140745.27767-3-imammedo@redhat.com>
[ehabkost: remove numa-test.c changes]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add new version of Cascadelake-Server CPU model, setting
stepping=5 and enabling the IA32_ARCH_CAPABILITIES MSR
with some flags.
The new feature will introduce a new host software requirement,
breaking our CPU model runnability promises. This means we can't
enable the new CPU model version by default in QEMU 4.1, because
management software isn't ready yet to resolve CPU model aliases.
This is why "pc-*-4.1" will keep returning Cascadelake-Server-v1
if "-cpu Cascadelake-Server" is specified.
Includes a test case to ensure the right combinations of
machine-type + CPU model + command-line feature flags will work
as expected.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628002844.24894-10-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190703221723.8161-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
