Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() violates this principle: it calls
error_report() via callback qemu_rdma_reg_whole_ram_blocks(). I
elected not to investigate how callers handle the error, i.e. precise
impact is not known.
Clean this up by converting the callback to Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-39-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() and qemu_rdma_exchange_recv() violate this
principle: they call error_report() via
qemu_rdma_exchange_get_response(). I elected not to investigate how
callers handle the error, i.e. precise impact is not known.
Clean this up by converting qemu_rdma_exchange_get_response() to
Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-38-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qio_channel_rdma_writev() violates this principle: it calls
error_report() via qemu_rdma_exchange_send(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_exchange_send() to Error.
Necessitates setting an error when qemu_rdma_post_recv_control(),
callback(), or qemu_rdma_exchange_get_response() failed. Since these
errors will go away later in this series, simply use "FIXME temporary
error message" there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-37-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qio_channel_rdma_readv() violates this principle: it calls
error_report() via qemu_rdma_exchange_recv(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_exchange_recv() to Error.
Necessitates setting an error when qemu_rdma_exchange_get_response()
failed. Since this error will go away later in this series, simply
use "FIXME temporary error message" there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-36-armbru@redhat.com>
These guards are all redundant now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-35-armbru@redhat.com>
qemu_rdma_resolve_host() and qemu_rdma_dest_init() iterate over
addresses to find one that works, holding onto the first Error from
qemu_rdma_broken_ipv6_kernel() for use when no address works. Issues:
1. If @errp was &error_abort or &error_fatal, we'd terminate instead
of trying the next address. Can't actually happen, since no caller
passes these arguments.
2. When @errp is a pointer to a variable containing NULL, and
qemu_rdma_broken_ipv6_kernel() fails, the variable no longer
contains NULL. Subsequent iterations pass it again, violating
Error usage rules. Dangerous, as setting an error would then trip
error_setv()'s assertion. Works only because
qemu_rdma_broken_ipv6_kernel() and the code following the loops
carefully avoids setting a second error.
3. If qemu_rdma_broken_ipv6_kernel() fails, and then a later iteration
finds a working address, @errp still holds the first error from
qemu_rdma_broken_ipv6_kernel(). If we then run into another error,
we report the qemu_rdma_broken_ipv6_kernel() failure instead.
4. If we don't run into another error, we leak the Error object.
Use a local error variable, and propagate to @errp. This fixes 3. and
also cleans up 1 and partly 2.
Free this error when we have a working address. This fixes 4.
Pass the local error variable to qemu_rdma_broken_ipv6_kernel() only
until it fails. Pass null on any later iterations. This cleans up
the remainder of 2.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-34-armbru@redhat.com>
ERROR() has become "error_setg() unless an error has been set
already". Hiding the conditional in the macro is in the way of
further work. Replace the macro uses by their expansion, and delete
the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-33-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
Macro ERROR() violates this principle. Delete the error_report()
there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-32-armbru@redhat.com>
When migration capability @rdma-pin-all is true, but the server cannot
honor it, qemu_rdma_connect() calls macro ERROR(), then returns
success.
ERROR() sets an error. Since qemu_rdma_connect() returns success, its
caller rdma_start_outgoing_migration() duly assumes @errp is still
clear. The Error object leaks.
ERROR() additionally reports the situation to the user as an error:
RDMA ERROR: Server cannot support pinning all memory. Will register memory dynamically.
Is this an error or not? It actually isn't; we disable @rdma-pin-all
and carry on. "Correcting" the user's configuration decisions that
way feels problematic, but that's a topic for another day.
Replace ERROR() by warn_report(). This plugs the memory leak, and
emits a clearer message to the user.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-31-armbru@redhat.com>
When a function returns 0 on success, negative value on error,
checking for non-zero suffices, but checking for negative is clearer.
So do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-30-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-29-armbru@redhat.com>
All we do with the value of RDMAContext member @error_state is test
whether it's zero. Change to bool and rename to @errored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-28-armbru@redhat.com>
This is just to make the error value more obvious. Callers don't
mind.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-27-armbru@redhat.com>
Several functions return negative errno codes on failure. Callers
check for specific codes exactly never. For some of the functions,
callers couldn't check even if they wanted to, because the functions
also return negative values that aren't errno codes, leaving readers
confused on what the function actually returns.
Clean up and simplify: return -1 instead of negative errno code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-26-armbru@redhat.com>
rdma_getaddrinfo() returns 0 on success. On error, it returns one of
the EAI_ error codes like getaddrinfo() does, or -1 with errno set.
This is broken by design: POSIX implicitly specifies the EAI_ error
codes to be non-zero, no more. They could clash with -1. Nothing we
can do about this design flaw.
Both callers of rdma_getaddrinfo() only recognize negative values as
error. Works only because systems elect to make the EAI_ error codes
negative.
Best not to rely on that: change the callers to treat any non-zero
value as failure. Also change them to return -1 instead of the value
received from getaddrinfo() on failure, to avoid positive error
values.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-25-armbru@redhat.com>
The QEMUFileHooks methods don't come with a written contract. Digging
through the code calling them, we find:
* save_page():
Negative values RAM_SAVE_CONTROL_DELAYED and
RAM_SAVE_CONTROL_NOT_SUPP are special. Any other negative value is
an unspecified error.
qemu_rdma_save_page() returns -EIO or rdma->error_state on error. I
believe the latter is always negative. Nothing stops either of them
to clash with the special values, though. Feels unlikely, but fix
it anyway to return only the special values and -1.
* before_ram_iterate(), after_ram_iterate():
Negative value means error. qemu_rdma_registration_start() and
qemu_rdma_registration_stop() comply as far as I can tell. Make
them comply *obviously*, by returning -1 on error.
* hook_ram_load:
Negative value means error. rdma_load_hook() already returns -1 on
error. Leave it alone.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-24-armbru@redhat.com>
qemu_rdma_data_init() neglects to set an Error when it fails because
@host_port is null. Fortunately, no caller passes null, so this is
merely a latent bug. Drop the flawed code handling null argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-23-armbru@redhat.com>
qemu_get_cm_event_timeout() neglects to set an error when it fails
because rdma_get_cm_event() fails. Harmless, as its caller
qemu_rdma_connect() substitutes a generic error then. Fix it anyway.
qemu_rdma_connect() also sets the generic error when its own call of
rdma_get_cm_event() fails. Make the error handling more obvious: set
a specific error right after rdma_get_cm_event() fails. Delete the
generic error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-22-armbru@redhat.com>
qemu_rdma_resolve_host() and qemu_rdma_dest_init() try addresses until
they find on that works. If none works, they return the first Error
set by qemu_rdma_broken_ipv6_kernel(), or else return a generic one.
qemu_rdma_broken_ipv6_kernel() neglects to set an Error when
ibv_open_device() fails. If a later address fails differently, we use
that Error instead, or else the generic one. Harmless enough, but
needs fixing all the same.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-21-armbru@redhat.com>
Hiding return statements in macros is a bad idea. Use a function
instead, and open code the return part.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-20-armbru@redhat.com>
QIOChannelClass methods qio_channel_rdma_readv() and
qio_channel_rdma_writev() violate their method contract when
rdma->error_state is non-zero:
1. They return whatever is in rdma->error_state then. Only -1 will be
fine. -2 will be misinterpreted as "would block". Anything less
than -2 isn't defined in the contract. A positive value would be
misinterpreted as success, but I believe that's not actually
possible.
2. They neglect to set an error then. If something up the call stack
dereferences the error when failure is returned, it will crash. If
it ignores the return value and checks the error instead, it will
miss the error.
Crap like this happens when return statements hide in macros,
especially when their uses are far away from the definition.
I elected not to investigate how callers are impacted.
Expand the two bad macro uses, so we can set an error and return -1.
The next commit will then get rid of the macro altogether.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-19-armbru@redhat.com>
Several error messages include numeric error codes returned by failed
functions:
* ibv_poll_cq() returns an unspecified negative value. Useless.
* rdma_accept and rdma_get_cm_event() return -1. Useless.
* qemu_rdma_poll() returns either -1 or an unspecified negative
value. Useless.
* qemu_rdma_block_for_wrid(), qemu_rdma_write_flush(),
qemu_rdma_exchange_send(), qemu_rdma_exchange_recv(),
qemu_rdma_write() return a negative value that may or may not be an
errno value. While reporting human-readable errno
information (which a number is not) can be useful, reporting an
error code that may or may not be an errno value is useless.
Drop these error codes from the error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-18-armbru@redhat.com>
We use errno after calling Libibverbs functions that are not
documented to set errno (manual page does not mention errno), or where
the documentation is unclear ("returns [...] the value of errno on
failure"). While this could be read as "sets errno and returns it",
a glance at the source code[*] kills that hope:
static inline int ibv_post_send(struct ibv_qp *qp, struct ibv_send_wr *wr,
struct ibv_send_wr **bad_wr)
{
return qp->context->ops.post_send(qp, wr, bad_wr);
}
The callback can be
static int mana_post_send(struct ibv_qp *ibqp, struct ibv_send_wr *wr,
struct ibv_send_wr **bad)
{
/* This version of driver supports RAW QP only.
* Posting WR is done directly in the application.
*/
return EOPNOTSUPP;
}
Neither of them touches errno.
One of these errno uses is easy to fix, so do that now. Several more
will go away later in the series; add temporary FIXME commments.
Three will remain; add TODO comments. TODO, not FIXME, because the
bug might be in Libibverbs documentation.
[*] https://github.com/linux-rdma/rdma-core.git
commit 55fa316b4b18f258d8ac1ceb4aa5a7a35b094dcf
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-17-armbru@redhat.com>
@error_reported and @received_error are flags. The latter is even
assigned bool true. Change them from int to bool.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-16-armbru@redhat.com>
qemu_rdma_buffer_mergeable() is semantically a predicate. It returns
int 0 or 1. Return bool instead, and fix the function name's
spelling.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-15-armbru@redhat.com>
qemu_rdma_search_ram_block() can't fail. Return void, and drop the
unreachable error handling.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-14-armbru@redhat.com>
rdma_add_block() can't fail. Return void, and drop the unreachable
error handling.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-13-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-12-armbru@redhat.com>
include/qapi/error.h demands:
* - Functions that use Error to report errors have an Error **errp
* parameter. It should be the last parameter, except for functions
* taking variable arguments.
qemu_rdma_connect() does not conform. Clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-11-armbru@redhat.com>
qemu_rdma_accept() returns 0 in some cases even when it didn't
complete its job due to errors. Impact is not obvious. I figure the
caller will soon fail again with a misleading error message.
Fix it to return -1 on any failure.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-10-armbru@redhat.com>
qemu_rdma_exchange_get_response() compares int parameter @expecting
with uint32_t head->type. Actual arguments are non-negative
enumeration constants, RDMAControlHeader uint32_t member type, or
qemu_rdma_exchange_recv() int parameter expecting. Actual arguments
for the latter are non-negative enumeration constants. Change both
parameters to uint32_t.
In qio_channel_rdma_readv(), loop control variable @i is ssize_t, and
counts from 0 up to @niov, which is size_t. Change @i to size_t.
While there, make qio_channel_rdma_readv() and
qio_channel_rdma_writev() more consistent: change the former's @done
to ssize_t, and delete the latter's useless initialization of @len.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-8-armbru@redhat.com>
qio_channel_rdma_readv() assigns the size_t value of qemu_rdma_fill()
to an int variable before it adds it to @done / subtracts it from
@want, both size_t. Truncation when qemu_rdma_fill() copies more than
INT_MAX bytes. Seems vanishingly unlikely, but needs fixing all the
same.
Fixes: 6ddd2d76ca (migration: convert RDMA to use QIOChannel interface)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-7-armbru@redhat.com>
We use int instead of uint64_t in a few places. Change them to
uint64_t.
This cleans up a comparison of signed qemu_rdma_block_for_wrid()
parameter @wrid_requested with unsigned @wr_id. Harmless, because the
actual arguments are non-negative enumeration constants.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-6-armbru@redhat.com>
wrid_desc[] uses 4001 pointers to map four integer values to strings.
print_wrid() accesses wrid_desc[] out of bounds when passed a negative
argument. It returns null for values 2..1999 and 2001..3999.
qemu_rdma_poll() and qemu_rdma_block_for_wrid() print wrid_desc[wr_id]
and passes print_wrid(wr_id) to tracepoints. Could conceivably crash
trying to format a null string. I believe access out of bounds is not
possible.
Not worth cleaning up. Dumb down to show just numeric wr_id.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-5-armbru@redhat.com>
rdma_delete_block() always returns 0, which its only caller ignores.
Return void instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-4-armbru@redhat.com>
qemu_rdma_data_init() return type is void *. It actually returns
RDMAContext *, and all its callers assign the value to an
RDMAContext *. Unclean.
Return RDMAContext * instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-3-armbru@redhat.com>
qemu_rdma_poll()'s return type is uint64_t, even though it returns 0,
-1, or @ret, which is int. Its callers assign the return value to int
variables, then check whether it's negative. Unclean.
Return int instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-2-armbru@redhat.com>
There's a bug on dest that if a double fault triggered on dest qemu (a
network issue during postcopy-recover), we won't set PAUSED correctly
because we assumed we always came from ACTIVE.
Fix that by always overwriting the state to PAUSE.
We could also check for these two states, but maybe it's an overkill. We
did the same on the src QEMU to unconditionally switch to PAUSE anyway.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-10-peterx@redhat.com>
There is currently no way to write a test for errors that happened in
qmp_migrate before the migration has started.
Add a version of qmp_migrate that ensures an error happens. To make
use of it a test needs to set MigrateCommon.result as
MIG_TEST_QMP_ERROR.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-6-farosas@suse.de>
We are sending a migration event of MIGRATION_STATUS_SETUP at
qemu_start_incoming_migration but never actually setting the state.
This creates a window between qmp_migrate_incoming and
process_incoming_migration_co where the migration status is still
MIGRATION_STATUS_NONE. Calling query-migrate during this time will
return an empty response even though the incoming migration command
has already been issued.
Commit 7cf1fe6d68 ("migration: Add migration events on target side")
has added support to the 'events' capability to the incoming part of
migration, but chose to send the SETUP event without setting the
state. I'm assuming this was a mistake.
This introduces a change in behavior, any QMP client waiting for the
SETUP event will hang, unless it has previously enabled the 'events'
capability. Having the capability enabled is sufficient to continue to
receive the event.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-5-farosas@suse.de>
Use the new migrate_incoming_qmp helper in the places that currently
open-code calling migrate-incoming.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-4-farosas@suse.de>
file-based migration requires the target to initiate its migration after
the source has finished writing out the data in the file. Currently
there's no easy way to initiate 'migrate-incoming', allow this by
introducing migrate_incoming_qmp helper, similarly to migrate_qmp.
Also make sure migration events are enabled and wait for the incoming
migration to start before returning. This avoid a race when querying
the migration status too soon after issuing the command.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-3-farosas@suse.de>
The following patch will make use of this function from within
migrate-helpers.c, so move it there.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-2-farosas@suse.de>
QEMU will crash if anyone tries to set tls-authz (which is a type
StrOrNull) with 'null' value. Fix it in the easy way by converting it to
qstring just like the other two tls parameters.
Cc: qemu-stable@nongnu.org # v4.0+
Fixes: d2f1d29b95 ("migration: add support for a "tls-authz" migration parameter")
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230905162335.235619-2-peterx@redhat.com>
Coverity complains that we have an unbalance use of mutex leading to
potential deadlocks.
Fixes: CID 1519048
Fixes: a208ba09bd ("tests/plugin: add a hotblocks plugin")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-26-alex.bennee@linaro.org>
Coverity complains that e don't check for a truncation when copying in
the path. Bail if we can't copy the whole path into sockaddr.
Fixes: CID 1519045
Fixes: CID 1519046
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-25-alex.bennee@linaro.org>
Coverity complains that appends_stats_line can be fed a 0 leading
to the undefined behaviour of a divide by 0.
Fixes: CID 1519044
Fixes: CID 1519047
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-24-alex.bennee@linaro.org>
Translation logic may partially decode an instruction, then abort and
remove the instruction from the TB. This can happen for example when an
instruction spans two pages. In this case, plugins may get an incorrect
result when calling qemu_plugin_tb_n_insns to query for the number of
instructions in the TB. This patch updates plugin_gen_tb_end to set the
final instruction count.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
[AJB: added g_assert to defed API]
Message-Id: <CADc=-s5RwGViNTR-h5cq3np673W3RRFfhr4vCGJp0EoDUxvhog@mail.gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-23-alex.bennee@linaro.org>