Commit Graph

15 Commits

Author SHA1 Message Date
Guillaume Subiron
fc3779a118 slirp: Generalizing and neutralizing ARP code
Basically, this patch replaces "arp" by "resolution" every time "arp"
means "mac resolution" and not specifically ARP.

This prepares for IPv6 support.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04 13:22:06 +08:00
Michael Tokarev
0e44486cdc slirp: remove mbuf(m_hdr,m_dat) indirection 2013-07-19 12:52:03 +04:00
Jan Kiszka
a68adc2206 slirp: Cleanup resources on instance removal
Close & free sockets when shutting down a slirp instance, also release
all buffers.

CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-03-13 14:05:49 +01:00
Jan Kiszka
79e7e937bd slirp: Clean up ifs_init
Remove duplicate ifs_init macros, reimplement the logic as static inline
in mbuf.h.

CC: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-02-27 14:54:49 +01:00
Thomas Huth
2b44043265 slirp: Fix packet expiration
The two new variables "arp_requested" and "expiration_date" in the mbuf
structure have been added after the variable-sized "m_dat_" array. The
variables have to be added before the m_dat_ array instead.
Without this patch, the expiration_date gets clobbered by code that
accesses the m_dat_ array.
I experienced this problem with the code in slirp/tftp.c: The
tftp_send_data() function created a new packet with the m_get()
function (which fills-in a default expiration_date value). Then the
TFTP code cleared the data section of the packet, which accidentially
also cleared the expiration_date. This zeroed expiration_date then
finally causes the packet to be discarded during if_start(), so that
TFTP packets were not transmitted anymore.

[Jan: added comment as suggested by Fabien ]

CC: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-09-28 13:11:30 +02:00
Fabien Chouteau
1ab74cea06 Delayed IP packets
In the current implementation, if Slirp tries to send an IP packet to a client
with an unknown hardware address, the packet is simply dropped and an ARP
request is sent (if_encap in slirp/slirp.c).

With this patch, Slirp will send the ARP request, re-queue the packet and try
to send it later. The packet is dropped after one second if the ARP reply is
not received.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-03 12:57:11 +02:00
Jan Kiszka
3acccfc67d slirp: Replace m_freem with m_free
Remove this pointless wrapping.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 10:19:49 -05:00
Blue Swirl
6cb9c6d36f Fix breakage by obsolete _P() for good
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-01 19:11:17 +00:00
Jan Kiszka
460fec67ee slirp: Factor out internal state structure
The essence of this patch is to stuff (almost) all global variables of
the slirp stack into the structure Slirp. In this step, we still keep
the structure as global variable, directly accessible by the whole
stack. Changes to the external interface of slirp will be applied in
the following patches.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:49 -05:00
Jan Kiszka
0fe6a7f284 slirp: Drop statistic code
As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:46 -05:00
Jan Kiszka
0d62c4cfe2 slirp: Drop dead code
After all its years inside the qemu tree, there is no point in keeping
the dead code paths of slirp. This patch is a first round of removing
usually commented out code parts. More cleanups need to follow (and
maybe finally a proper reindention).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:46 -05:00
aliguori
2f5f899631 Remove the advertising clause from the slirp license
According to the FSF, the 4-clause BSD license, which slirp is covered under,
is not compatible with the GPL or LGPL[1].

[1] http://www.fsf.org/licensing/licenses/index_html#GPLIncompatibleLicenses

There are three declared copyright holders in slirp that use the 4-clause
BSD license, the Regents of UC Berkley, Danny Gasparovski, and Kelly Price.
Below are the appropriate permissions to remove the advertise clause from slirp
from each party.

Special thanks go to Richard Fontana from Red Hat for contacting all of the
necessary authors to resolve this issue!

Regents of UC Berkley:
From ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change

July 22, 1999

To All Licensees, Distributors of Any Version of BSD:

As you know, certain of the Berkeley Software Distribution ("BSD") source
code files require that further distributions of products containing all or
portions of the software, acknowledge within their advertising materials
that such products contain software developed by UC Berkeley and its
contributors.

Specifically, the provision reads:

"     * 3. All advertising materials mentioning features or use of this software
      *    must display the following acknowledgement:
      *    This product includes software developed by the University of
      *    California, Berkeley and its contributors."

Effective immediately, licensees and distributors are no longer required to
include the acknowledgement within advertising materials.  Accordingly, the
foregoing paragraph of those BSD Unix files containing it is hereby deleted
in its entirety.

William Hoskins
Director, Office of Technology Licensing
University of California, Berkeley

Danny Gasparovski:

Subject: RE: Slirp license
Date: Thu, 8 Jan 2009 10:51:00 +1100
From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au>
To: "Richard Fontana" <rfontana@redhat.com>

Hi Richard,

I have no objection to having Slirp code in QEMU be licensed under the
3-clause BSD license.

Thanks for taking the effort to consult me about this.


Dan ...

Kelly Price:

Date: Thu, 8 Jan 2009 19:38:56 -0500
From: "Kelly Price" <strredwolf@gmail.com>
To: "Richard Fontana" <rfontana@redhat.com>
Subject: Re: Slirp license

Thanks for contacting me, Richard.  I'm glad you were able to find
Dan, as I've been "keeping the light on" for Slirp.  I have no use for
it now, and I have little time for it (now holding onto Keenspot's
Comic Genesis and having a regular US state government position). If
Dan would like to return to the project, I'd love to give it back to
him.

As for copyright, I don't own all of it.  Dan does, so I will defer to
him.  Any of my patches I will gladly license to the 3-part BSD
license.  My interest in re-licensing was because we didn't have ready
info to contact Dan.  If Dan would like to port Slirp back out of
QEMU, a lot of us 64-bit users would be grateful.

Feel free to share this email address with Dan.  I will be glad to
effect a transfer of the project to him and Mr. Bellard of the QEMU
project.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6451 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-26 19:37:41 +00:00
blueswir1
9634d9031c Use const and static as needed, disable unused code
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3452 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-26 19:01:16 +00:00
ths
5fafdf24ef find -type f | xargs sed -i 's/[\t ]$//g' # on most files
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16 21:08:06 +00:00
bellard
f0cbd3ec9f initial user mode network support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@733 c046a42c-6fe2-441c-8c8c-71466251a162
2004-04-22 00:10:48 +00:00