# By Andreas Färber
# Via Alexander Graf
* agraf/s390-for-upstream:
target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()
target-s390x: Clean up cpu_inject_*() signatures
target-s390x: Fix debug output
target-s390x: Fix debug output (continued)
# By Andreas Färber (2) and Alexander Graf (1)
# Via Alexander Graf
* agraf/ppc-for-upstream:
target-ppc: Fix build for PPC_DEBUG_DISAS
target-ppc: Fix unused variable warning for FLUSH_ALL_TLBS
PPC: Unify dcbzl code path
# By Andreas Färber
# Via Andreas Färber
* afaerber/qom-cpu:
linux-user: bsd-user: Don't reset X86CPU twice
target-i386: Pass X86CPU to cpu_x86_set_a20()
target-unicore32: Rename CPU subtypes
target-openrisc: Rename CPU subtypes
target-openrisc: TYPE_OPENRISC_CPU should be abstract
target-m68k: Rename CPU subtypes
target-m68k: Mark as unmigratable
target-s390x: Mark as unmigratable
target-sh4: Mark as unmigratable
target-xtensa: Mark as unmigratable
target-microblaze: Mark as unmigratable
target-unicore32: Mark as unmigratable
ide/mmio: QOM'ify MMIO IDE for R2D
# By Henry Harrington (1) and Stefan Weil (1)
# Via Andreas Färber
* afaerber-or/cocoa-for-upstream:
cocoa: Replace non-portable asprintf() by g_strdup_printf()
cocoa: Fix VBE function Set Display Start
This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRCmGLAAoJECgfDbjSjVRp6PUH/1YsrRgrPUEhrhHwM4OPAMB5
D/kcTwrS4R7XNk6HRElfVnPbDYl2iIqi7a6RrY/x2jQvMBaghT5v6w07kg9gCooF
qNpHUr0y2YHy9yIFpG36SntqDmXXqvd4ngAMn7EviDH6OvwI8dSqbIVRUFc8yw5c
g+EyEQpyZieBVEGnWPEl6qDo4KFw9nU3p0A93fsQnKikXet00d+V01hQ4TALbBxk
EkeM1tYTjVlHOZAPsq6I2/CvRCO7YbIaboJJ9ZQ83GCX7TEsYELaMOc1qxVOAv0k
rKVijwqyHvhncxumPM/NIUuSnQTQxxeJmV4mWLARPGSh7FYorqMesnY4p1aX4RQ=
=k7PQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,make,pci,e1000,vfio,piix
This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 31 Jan 2013 06:20:27 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (6) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vfio-pci: Enable PCIe extended config space
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
ich9: add support for pci assignment
virtio-net: rename ctrl rx commands
virtio-net: introduce a new macaddr control
virtio-net: remove layout assumptions for ctrl vq
virtio-net: revert mac on reset
rules/mak: make clean should blow away timestamp files
Makefile: clean timestamp generation rule
rules.mak: cleanup config generation rules
e1000: document ICS read behaviour
This prepares for moving the halted field to CPUState.
Most call sites can already supply S390CPU, for some env becomes unused.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Despite cautioning that S390CPU is needed for upcoming CPUState
refactorings, commit 5d69c547d9 (s390:
I/O interrupt and machine check injection.) added functions
cpu_inject_io() and cpu_inject_crw_mchk() with CPUS390XState argument,
claiming consistency with cpu_inject_ext().
This complicates making cpu_interrupt() take a CPUState even more and it
required to pass &cpu->env from some S390CPU-aware call sites already,
creating inconsistency elsewhere. Address that.
This also eliminates the need for CPUS390XState in s390_virtio_irq().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 71e470886f (target-s390x: fix
style) renamed the cpu_s390x_handle_mmu_fault() argument from _vaddr to
orig_vaddr. Update the debug output code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since its introduction in d5a439645a
(s390x: helper functions for system emulation) the variable name was
raddr. Fix this.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
In r5949 / 76db3ba44e (target-ppc: memory
load/store rework) variable little_endian was replaced with ctx.le_mode.
Update the debug code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The bit that makes a dcbz instruction a dcbzl instruction was declared as
reserved in ppc32 ISAs. However, hardware simply ignores the bit, making
code valid if it simply invokes dcbzl instead of dcbz even on 750 and G4.
Thus, mark the bit as unreserved so that we properly emulate a simple dcbz
in case we're running on non-G5s.
While at it, also refactor the code to check the 970 special case during
runtime. This way we don't need to differenciate between a 970 dcbz and
any other dcbz anymore. We also allow for future improvements to add e500mc
dcbz handling.
Reported-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Since commit 65dee38052 (target-i386:
move cpu_reset and reset callback to cpu.c) the x86 CPU is reset through
cpu_init() but was still reset immediately after in linux-user and
bsd-user. Clean this up.
Similarly in linux-user/syscall.c it is also reset after cpu_copy().
But that's a bug of its own, fixing which poses a semantic change.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Prepares for cpu_interrupt() changing argument to CPUState.
While touching it, rename to x86_cpu_...() now that it takes an X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
In the initial conversion of CPU models to QOM types, model names were
mapped 1:1 to type names. As a side effect this gained us a type "any",
which is now a device.
To avoid "-device any" silliness and to pave the way for compiling
multiple targets into one executable, adopt a <name>-<arch>-cpu scheme.
No functional changes for -cpu arguments.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Model names were mapped 1:1 to type names. As a side effect this
registered a type "any", which is now a device.
To avoid "-device any" silliness and to pave the way for compiling
multiple targets into one executable, adopt a <name>-<arch>-cpu scheme.
No functional changes for -cpu arguments or -cpu ? output.
Signed-off-by: Andreas Färber <afaerber@suse.de>
A basic assumption of CPU subtypes is that only specific models get
instantiated. A user is not supposed to instantiate an <arch>-cpu.
Suppress it via abstract = true, which also drops or32-cpu from
-cpu ? output.
Cc: qemu-stable@nongnu.org
Cc: Jia Liu <proljc@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In the initial conversion of CPU models to QOM types, model names were
mapped 1:1 to type names. As a side effect this gained us a type "any",
which is now a device.
To avoid "-device any" silliness and to pave the way for compiling
multiple targets into one executable, adopt a <name>-<arch>-cpu scheme.
No functional changes for -cpu arguments or -cpu ? output.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It neither defined CPU_SAVE_VERSION nor implemented cpu_{save,load}().
Mark M68kCPU as unmigratable at device level.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CPU_SAVE_VERSION was undefined, so "cpu_common" VMState and
cpu_{save,load}() were not registered. They were no-ops.
Therefore there is no backwards compatibility to keep, so we can mark
S390CPU as unmigratable at device level.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
It neither defined CPU_SAVE_VERSION nor implemented cpu{save,load}().
Mark it as unmigratable at device level.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
There was no CPU_SAVE_VERSION defined, so neither "cpu_common" VMState
nor cpu_{save,load}() were registered. Their implementation was no-op.
Therefore there is no backwards compatibility to keep, so mark XtensaCPU
as unmigratable at device level.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
cpu_{save,load} were no-ops, so de facto it is unmigratable and no
backwards compatibility to keep. Therefore mark the MicroBlazeCPU as
unmigratable at device level the QOM way and suppress "cpu_common"
VMState registration by dropping CPU_SAVE_VERSION.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CPU_SAVE_VERSION 2 was bogus as both save and load would just throw a
hw_error(). Therefore we can without problems suppress registration of
"cpu_common" VMState by dropping CPU_SAVE_VERSION define and provide an
unmigratable "cpu" VMStateDescription for UniCore32CPU at device level
instead, where we can attach this the QOM way.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
It was not qdev'ified before, so turn it into a SysBusDevice.
Keep mmio_ide_init_drives() around to attach the hard drive.
Signed-off-by: Andreas Färberr <afaerber@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The pos field in the DSPControl register is not correctly initialized.
Per documentation, the result of MTHLIP is unpredictable if the value of the
pos field before the execution is greater than 32.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
compute_hflags() will reset DSP h-flags, so MX bit should be initially set
for usermode in cpu_state_reset() if DSP ASE is implemented.
This change will bring back user-mode support for DSP ASE, since one of the
recent changes broke it.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Turn MADD.fmt, MSUB.fmt, NMADD.fmt and NMSUB.fmt from fused to unfused
operations, so that they behave in the same way as a separate multiplication
and addition. The instructions were only fused in early MIPS IV processors.
Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Sign-extend the result of LWR, as is already done for LWL. This is necessary
in the case where LWR loads the full word (i.e. the address is actually
aligned). In the other cases, it is implementation defined whether the
upper 32 bits of the result are unchanged or a copy of bit 31. The latter
seems easier to implement.
Previously the code used:
(oldval & (0xfffffffe << (31 - bitshift))) | (newval >> bitshift)
which zeroed the upper bits of the register, losing any previous sign
extension in the unaligned cases.
Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make RESTORE use sign-extending rather than zero-extending loads.
Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Rename CPU types
target-arm: Fix TCG temp leaks for WI and UNDEF VFP sysreg writes
DSP instruction from the (d)append sub-class can be implemented with
TCG. Use a different function for these instructions are they are quite
different from compare-pick sub-class.
Fix BALIGN instruction for negative value, where the value should be
zero-extended before being shift to the right.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of playing with bit shifting, add two unions (one for 32-bit
values, one for 64-bit ones) to access all the DSP elements with the
correct type.
This make the code easier to read and less error prone, and allow GCC
to vectorize the code in some cases.
Reviewed-by: Eric Johnson <ericj@mips.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On CPU without DSP ASE support, a reserved instruction exception (instead of
a DSP ASE sate disabled) should be generated.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Copy insn_flags in DisasContext to avoid passing a CPUMIPSState pointer
to subroutines, as suggested by Richard Henderson. Change subroutines to
use this new field and remove the first argument.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When rd is 0, which still need to do the actually load to possibly
generate a TLB exception.
Reviewed-by: Eric Johnson <ericj@mips.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Register a dpy_gfx_setdata callback so that the Cocoa code
is notified whenever the screen start address changes.
Commit 1d3323d has a similar fix for the VNC UI.
Signed-off-by: Henry Harrington <henry.harrington@gmail.com>
Cc: qemu-stable@nongnu.org (1.3.x)
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
# By Christoffer Dall (1) and Peter Maydell (1)
# Via Peter Maydell
* pmaydell/arm-devs.next:
hw/vexpress: Use correct HBI (board model number) for vexpress-a15
hw/arm_sysctl: Clear sysctl cfgctrl start bit
# By Markus Armbruster (12) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
qmp-commands.hx: s/tray-open/tray_open/ to match qapi schema
tests: Fix {rtc, m48t59}-test build on illumos
qemu-pixman.h: Avoid mutual inclusion loop with console.h
qemu-ga: Fix unchecked strdup() by converting to g_strdup()
qapi: Fix unchecked strdup() by converting to g_strdup()
libcacard: Fix unchecked strdup() by converting to g_strdup()
qemu-log: Plug trivial memory leak in cpu_set_log_filename()
qemu-log: Fix unchecked strdup() by converting to g_strdup()
virtfs-proxy-helper: Fix unchecked strdup() by conv. to g_strdup()
spice: Fix unchecked strdup() by converting to g_strdup()
readline: Fix unchecked strdup() by converting to g_strdup()
hw/9pfs: Fix unchecked strdup() by converting to g_strdup()
g_strdup(NULL) returns NULL; simplify
g_malloc(0) and g_malloc0(0) return NULL; simplify
xilinx_axidma: Fix debug mode compile messages
cadence_gem: Debug mode compile fixes
cadence_ttc: Debug mode compile fixes
vnc: Clean up vncws_send_handshake_response()
# By Andreas Färber
# Via Andreas Färber
* afaerber-or/prep-up:
prep: Move PReP machine to hw/ppc/
prep_pci: Convert to QOM realizefn
prep_pci: Create PCIBus and PCIDevice in-place
# By Cornelia Huck (13) and others
# Via Alexander Graf
* agraf/s390-for-upstream:
s390: Drop set_bit usage in virtio_ccw.
s390: css error codes.
s390: Use s390_cpu_physical_memory_map for tpi.
sclpconsole: Don't instantiate sclpconsole with -nodefaults
s390: Add s390-ccw-virtio machine.
s390-virtio: Check for NULL device in reset hypercall
s390: Move hw files to hw/s390x
virtio-s390: add a reset function to virtio-s390 devices
s390: Make typeinfo const
s390: Add new channel I/O based virtio transport.
s390-virtio: Factor out some initialization code.
s390: Wire up channel I/O in kvm.
s390: Virtual channel subsystem support.
s390: Add channel I/O instructions.
s390: I/O interrupt and machine check injection.
s390: Channel I/O basic definitions.
s390: Add mapping helper functions.
s390: Lowcore mapping helper.
s390: Add default support for SCLP console
In the initial conversion of CPU models to QOM types, model names were
mapped 1:1 to type names. As a side effect this gained us a type "any",
which is now a device.
To avoid "-device any" silliness and to pave the way for compiling
multiple targets into one executable, adopt a <name>-<arch>-cpu scheme.
This leads to names like arm926-arm-cpu but is easiest to handle.
No functional changes for -cpu arguments or -cpu ? output.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a leak of a TCG temporary in code paths for VFP system register
writes for cases which UNDEF or are write-ignored.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The vexpress-a15 QEMU model is supposed to be a V2P-CA15; the HBI
(a kind of board model number) for this coretile is 237, not 217.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The start bit should only be set to indicate that a function call is
underway, right now. When done with function, clear it.
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, we are using 'tray_open' in QMP and 'tray-open' in
HMP. However, the QMP documentation was mistakenly using the
HMP version.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
