It is currently impossible to hot-unplug a memory device between
machine reset and CAS.
(qemu) device_del dimm1
Error: Memory hot unplug not supported for this guest
This limitation was introduced in order to provide an explicit
error path for older guests that didn't support hot-plug event
sources (and thus memory hot-unplug).
The linux kernel has been supporting these since 4.11. All recent
enough guests are thus capable of handling the removal of a memory
device at all time, including during early boot.
Lift the limitation for the latest machine type. This means that
trying to unplug memory from a guest that doesn't support it will
likely just do nothing and the memory will only get removed at
next reboot. Such older guests can still get the existing behavior
by using an older machine type.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160794035064.23292.17560963281911312439.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Section 13.5.2 of LoPAPR mandates various DR related indentifiers
for all hot-pluggable entities to be exposed in the "ibm,drc-indexes",
"ibm,drc-power-domains", "ibm,drc-names" and "ibm,drc-types" properties
of their parent node. These properties are created with spapr_dt_drc().
PHBs and LMBs are both children of the machine. Their DR identifiers
are thus supposed to be exposed in the afore mentioned properties of
the root node.
When PHB hot-plug support was added, an extra call to spapr_dt_drc()
was introduced: this overwrites the existing properties, previously
populated with the LMB identifiers, and they end up containing only
PHB identifiers. This went unseen so far because linux doesn't care,
but this is still not conformant with LoPAPR.
Fortunately spapr_dt_drc() is able to handle multiple DR entity types
at the same time. Use that to handle DR indentifiers for PHBs and LMBs
with a single call to spapr_dt_drc(). While here also account for PMEM
DR identifiers, which were forgotten when NVDIMM hot-plug support was
added. Also add an assert to prevent further misuse of spapr_dt_drc().
With -m 1G,maxmem=2G,slots=8 passed on the QEMU command line we get:
Without this patch:
/proc/device-tree/ibm,drc-indexes
0000001f 20000001 20000002 20000003
20000000 20000005 20000006 20000007
20000004 20000009 20000008 20000010
20000011 20000012 20000013 20000014
20000015 20000016 20000017 20000018
20000019 2000000a 2000000b 2000000c
2000000d 2000000e 2000000f 2000001a
2000001b 2000001c 2000001d 2000001e
These are the DRC indexes for the 31 possible PHBs.
With this patch:
/proc/device-tree/ibm,drc-indexes
0000002b 90000000 90000001 90000002
90000003 90000004 90000005 90000006
90000007 20000001 20000002 20000003
20000000 20000005 20000006 20000007
20000004 20000009 20000008 20000010
20000011 20000012 20000013 20000014
20000015 20000016 20000017 20000018
20000019 2000000a 2000000b 2000000c
2000000d 2000000e 2000000f 2000001a
2000001b 2000001c 2000001d 2000001e
80000004 80000005 80000006 80000007
And now we also have the 4 ((2G - 1G) / 256M) LMBs and the
8 (slots) PMEMs.
Fixes: 3998ccd092 ("spapr: populate PHB DRC entries for root DT node")
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160794479566.35245.17809158217760761558.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All memory DRC objects are created during machine init. It is thus safe
to assume spapr_drc_by_id() cannot return NULL when hot-plug/unplugging
memory.
Make this clear with an assertion, like the code already does a few lines
above when looping over memory DRCs. This fixes Coverity reports 1437757
and 1437758.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160805381160.228955.5388294067094240175.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since NVDIMM support was introduced on pseries machine,
it ignored machine's nvdimm=on|off option and effectively
was always enabled on machines that support NVDIMM.
Later on commit
(28f5a71621 ppc/spapr_nvdimm: do not enable support with 'nvdimm=off')
makes QEMU error out in case user explicitly set 'nvdimm=off'
on CLI by peeking at machine_opts.
However that's a workaround and leaves 'nvdimms_state->is_enabled'
in inconsistent state (false) when it should be set true
by default.
Instead of using on machine_opts, set default to true for pseries
machine in initfn time. If user sets manually 'nvdimm=off'
it will overwrite default value to false and QEMU will error
as expected without need to peek into machine_opts.
That way pseries will have, nvdimm enabled by default and
will honor user provided 'nvdimm=on|off'.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201208164606.4109134-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
spapr_kvm_type() is considering 'vm_type=NULL' as a valid input, where
the function returns 0. This is relying on the current QEMU machine
options handling logic, where the absence of the 'kvm-type' option
will be reflected as 'vm_type=NULL' in this function.
This is not robust, and will break if QEMU options code decides to propagate
something else in the case mentioned above (e.g. an empty string instead
of NULL).
Let's avoid this entirely by setting a non-NULL default value in case of
no user input for 'kvm-type'. spapr_kvm_type() was changed to handle 3 fixed
values of kvm-type: "auto", "hv", and "pr", with "auto" being the default
if no kvm-type was set by the user. This allows us to always be predictable
regardless of any enhancements/changes made in QEMU options mechanics.
While we're at it, let's also document in 'kvm-type' description the
already existing default mode, now named 'auto'. The information provided
about it is based on how the pseries kernel handles the KVM_CREATE_VM
ioctl(), where the default value '0' makes the kernel choose an available
KVM module to use, giving precedence to kvm_hv. This logic is described in
the kernel source file arch/powerpc/kvm/powerpc.c, function kvm_arch_init_vm().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201210145517.1532269-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
All users are passing &error_abort already. Document the fact
that spapr_drc_attach() should only be passed a free DRC, which
is supposedly the case if appropriate checking is done earlier.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-5-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_pre_plug() already guarantees that the slot for the given core
ID is available. It is thus safe to assume that spapr_find_cpu_slot()
returns a slot during plug. Turn the error path into an assertion.
It is also safe to assume that no device is attached to the corresponding
DRC and that spapr_drc_attach() shouldn't fail.
Pass &error_abort to spapr_drc_attach() and simplify error handling.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-4-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU is hot-plugged, we set its compat mode to match the boot
CPU, which was either set by machine reset or by CAS. This is currently
handled in the plug handler after the core got realized. Potential errors
of ppc_set_compat() are propagated to the hot-plug logic.
Handling errors this late in the hot-plug sequence is generally frown
upon. Ideally, we should do sanity checks in a pre-plug handler and pass
&error_abort to ppc_set_compat() in the plug handler.
We can filter out some error cases of ppc_set_compat() by calling
ppc_check_compat() at pre-plug. But ppc_set_compat() also sets the
compat register in KVM, and KVM doesn't provide any API that would
allow to check valid compat mode settings beforehand.
However, at this point we know that the compat mode was already
successfully set for the boot CPU. Since this all boils down to
setting a register with the very same value that was valid
for the boot CPU, it should definitely not fail for hot-plugged
CPUS.
Pass &error_abort to ppc_set_compat().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-3-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This hack registers dummy VMState entries of ICPs in order to
support migration of old pseries machine types that used to
create all smp.max_cpus possible ICPs at machine init.
Part of the work is to unregister the dummy entries when plugging
an actual vCPU core, and to register them back when unplugging the
core. The code that unregisters the dummy ICPs in spapr_core_plug()
is misplaced: if ppc_set_compat() fails afterwards, the hotplug
operation will be cancelled and the dummy ICPs won't be registered
back since the unplug handler isn't called.
Unregister the dummy ICPs at the end of spapr_core_plug().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There can be only one TPM proxy at a time. This is currently
checked at plug time. But this can be detected at pre-plug in
order to error out earlier.
This allows to get rid of error handling in the plug handler.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-9-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We currently detect that a PHB index is already in use at plug time.
But this can be decteted at pre-plug in order to error out earlier.
This allows to pass &error_abort to spapr_drc_attach() and to end
up with a plug handler that doesn't need to report errors anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-8-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Read documentation in "qapi/error.h" and changelog of commit
e3fe3988d7 ("error: Document Error API usage rules") for
rationale.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-7-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Pre-plug of a memory device, be it an NVDIMM or a PC-DIMM, ensures
that the memory slot is available and that addresses don't overlap
with existing memory regions. The corresponding DRCs in the LMB
and PMEM namespaces are thus necessarily attachable at plug time.
Pass &error_abort to spapr_drc_attach() in spapr_add_lmbs() and
spapr_add_nvdimm(). This allows to greatly simplify error handling
on the plug path.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-3-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
serial_hd(i) is NULL if and only if i >= serial_max_hds(). Test
serial_hd(i) instead of bounding the loop at serial_max_hds(),
thus removing one more function that vl.c is expected to export.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add 6.0 machine types for arm/i440fx/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201109173928.1001764-1-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes QEMU needs to allocate the HPT in userspace, namely with TCG
or PR KVM. This is performed with qemu_memalign() because of alignment
requirements. Like glib's allocators, its behaviour is to abort on OOM
instead of returning NULL.
This could be changed to qemu_try_memalign(), but in the specific case
of spapr_reallocate_hpt(), the outcome would be to terminate QEMU anyway
since no HPT means no MMU for the guest. Drop the dead code instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160398562892.32380.15006707861753544263.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_reallocate_hpt() has three users, two of which pass &error_fatal
and the third one, htab_load(), passes &local_err, uses it to detect
failures and simply propagates -EINVAL up to vmstate_load(), which will
cause QEMU to exit. It is thus confusing that spapr_reallocate_hpt()
doesn't return right away when an error is detected in some cases. Also,
the comment suggesting that the caller is welcome to try to carry on
seems like a remnant in this respect.
This can be improved:
- change spapr_reallocate_hpt() to always report a negative errno on
failure, either as reported by KVM or -ENOSPC if the HPT is smaller
than what was asked,
- use that to detect failures in htab_load() which is preferred over
checking &local_err,
- propagate this negative errno to vmstate_load() because it is more
accurate than propagating -EINVAL for all possible errors.
[dwg: Fix compile error due to omitted prelim patch]
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160371605460.305923.5890143959901241157.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If kvmppc_load_htab_chunk() fails, its return value is propagated up
to vmstate_load(). It should thus be a negative errno, not -1 (which
maps to EPERM and would lure the user into thinking that the problem
is necessarily related to a lack of privilege).
Return the error reported by KVM or ENOSPC in case of short write.
While here, propagate the error message through an @errp argument
and have the caller to print it with error_report_err() instead
of relying on fprintf().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160371604713.305923.5264900354159029580.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hints should be added with the dedicated error_append_hint() API
because we don't want to print them when using QMP. This requires
to insert ERRP_GUARD as explained in "qapi/error.h".
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160371604030.305923.17464161378167312662.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", add a bool return value to
spapr_add_lmbs() and spapr_add_nvdimm(), and use them instead
of local_err in spapr_memory_plug().
This allows to get rid of the error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309734178.2739814.3488437759887793902.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the
default property list of the PC DIMM device class:
DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0),
DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot,
PC_DIMM_UNASSIGNED_SLOT),
They should thus be always gettable for both PC DIMMs and NVDIMMs.
An error in getting them can only be the result of a programming
error. It doesn't make much sense to propagate the error in this
case. Abort instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309732180.2739814.7243774674998010907.stgit@bahia.lan>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PC_DIMM_SLOT_PROP property is defined as:
DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot,
PC_DIMM_UNASSIGNED_SLOT),
Use object_property_get_int() instead of object_property_get_uint().
Since spapr_memory_plug() only gets called if pc_dimm_pre_plug()
succeeded, we expect to have a valid >= 0 slot number, either because
the user passed a valid slot number or because pc_dimm_get_free_slot()
picked one up for us.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309730758.2739814.15821922745424652642.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PC_DIMM_ADDR_PROP property is defined as:
DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0),
Use object_property_get_uint() instead of object_property_get_int().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309729609.2739814.4996614957953215591.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
pc_dimm_plug() doesn't use it. It only aborts on error.
Drop @errp and adapt the callers accordingly.
[dwg: Removed unused label to fix compile]
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309728447.2739814.12831204841251148202.stgit@bahia.lan>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr_create_nvdimm_dr_connectors() function doesn't need to access
any internal details of the sPAPR NVDIMM implementation. Also, pretty
much like for the LMBs, only spapr_machine_init() is responsible for the
creation of DR connectors for NVDIMMs.
Make this clear by making this function static in hw/ppc/spapr.c.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160249772183.757627.7396780936543977766.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The changes to come to NUMA support are all guest visible. In
theory we could just create a new 5_1 class option flag to
avoid the changes to cascade to 5.1 and under. The reality is that
these changes are only relevant if the machine has more than one
NUMA node. There is no need to change guest behavior that has
been around for years needlesly.
This new helper will be used by the next patches to determine
whether we should retain the (soon to be) legacy NUMA behavior
in the pSeries machine. The new behavior will only be exposed
if:
- machine is pseries-5.2 and newer;
- more than one NUMA node is declared in NUMA state.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201007172849.302240-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-14-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-13-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-11-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", return true on success and false on
failure. This allows to reduce error propagation overhead in the callers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-9-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that ppc_set_compat() indicates success/failure with a return
value, use it and reduce error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200914123505.612812-5-groug@kaod.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The nested KVM code does not yet support HPT guests. Calling the
KVM_CAP_PPC_ALLOC_HTAB ioctl currently leads to KVM setting the guest
as HPT and erroneously executing code in L1 that should only run in
hypervisor mode, leading to an exception in the L1 vcpu thread when it
enters the nested guest.
This can be reproduced with -machine max-cpu-compat=power8 in the L2
guest command line.
The KVM code has since been modified to fail the ioctl when running in
a nested environment so QEMU needs to be able to handle that. This
patch provides an error message informing the user about the lack of
support for HPT in nested guests.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20200911043123.204162-1-farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
it was deprecated since 4.1
commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes)
Users of existing VMs, wishing to preserve the same RAM distribution,
should configure it explicitly using ``-numa node,memdev`` options.
Current RAM distribution can be retrieved using HMP command
`info numa` and if separate memory devices (pc|nv-dimm) are present
use `info memory-device` and subtract device memory from output of
`info numa`.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200911084410.788171-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several callers of load_elf() pass pointers for lowaddr and highaddr
parameters which are then not used for anything. This may stem from a
misunderstanding that load_elf need a value here but in fact it can
take NULL to ignore these values. Remove such unused variables and
pass NULL instead from callers that don't need these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In a similar fashion as the previous patch, let's move the
handling of ibm,associativity-lookup-arrays from spapr.c to
spapr_numa.c. A spapr_numa_write_assoc_lookup_arrays() helper was
created, and spapr_dt_dynamic_reconfiguration_memory() can now
use it to advertise the lookup-arrays.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Vcpus have an additional paramenter to be appended, vcpu_id. This
also changes the size of the of property itself, which is being
represented in index 0 of numa_assoc_array[cpu->node_id],
and defaults to MAX_DISTANCE_REF_POINTS for all cases but
vcpus.
All this logic makes more sense in spapr_numa.c, where we handle
everything NUMA and associativity. A new helper spapr_numa_fixup_cpu_dt()
was added, and spapr.c uses it the same way as it was using the former
spapr_fixup_cpu_numa_dt().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-3-danielhb413@gmail.com>
[dwg: Correct uint to int type, which can break windows builds]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The next step to centralize all NUMA/associativity handling in
the spapr machine is to create a 'one stop place' for all
things ibm,associativity.
This patch introduces numa_assoc_array, a 2 dimensional array
that will store all ibm,associativity arrays of all NUMA nodes.
This array is initialized in a new spapr_numa_associativity_init()
function, called in spapr_machine_init(). It is being initialized
with the same values used in other ibm,associativity properties
around spapr files (i.e. all zeros, last value is node_id).
The idea is to remove all hardcoded definitions and FDT writes
of ibm,associativity arrays, doing instead a call to the new
helper spapr_numa_write_associativity_dt() helper, that will
be able to write the DT with the correct values.
We'll start small, handling the trivial cases first. The
remaining instances of ibm,associativity will be handled
next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're going to make changes in how spapr handles all
ibm,associativity* related properties to enhance our current NUMA
support.
At this moment we have associativity code scattered all around
spapr_* files, with hardcoded values and array sizes. This
makes it harder to change any NUMA specific parameters in
the future. Having everything in the same place allows not
only for easier tuning, but also easier understanding since all
NUMA related code is on the same file.
This patch introduces a new file to gather all NUMA/associativity
handling code in spapr, spapr_numa.c. To get things started, let's
remove associativity-reference-points and max-associativity-domains
code from spapr_dt_rtas() to a new helper called spapr_numa_write_rtas_dt().
This will decouple spapr_dt_rtas() from the NUMA changes that
are going to happen in those two properties.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200901125645.118026-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
NVDIMM has different contraints and conditions than the regular
DIMM and we'll need to add at least one more.
Instead of relying on 'if (nvdimm)' conditionals in the body of
spapr_memory_pre_plug(), use the existing spapr_nvdimm_validate_opts()
and put all NVDIMM handling code there. Rename it to
spapr_nvdimm_validate() to reflect that the function is now checking
more than the nvdimm device options. This makes spapr_memory_pre_plug()
a bit easier to follow, and we can tune in NVDIMM parameters
and validation in the same place.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
-----BEGIN PGP SIGNATURE-----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=L9Wi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging
ppc patch queue 2020-08-18
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
# gpg: Signature made Tue 18 Aug 2020 05:18:36 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20200818: (40 commits)
spapr/xive: Use xive_source_esb_len()
nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
spapr/xive: Simplify error handling of kvmppc_xive_cpu_synchronize_state()
ppc/xive: Simplify error handling in xive_tctx_realize()
spapr/xive: Simplify error handling in kvmppc_xive_connect()
ppc/xive: Fix error handling in vmstate_xive_tctx_*() callbacks
spapr/xive: Fix error handling in kvmppc_xive_post_load()
spapr/kvm: Fix error handling in kvmppc_xive_pre_save()
spapr/xive: Rework error handling of kvmppc_xive_set_source_config()
spapr/xive: Rework error handling in kvmppc_xive_get_queues()
spapr/xive: Rework error handling of kvmppc_xive_[gs]et_queue_config()
spapr/xive: Rework error handling of kvmppc_xive_cpu_[gs]et_state()
spapr/xive: Rework error handling of kvmppc_xive_mmap()
spapr/xive: Rework error handling of kvmppc_xive_source_reset()
spapr/xive: Rework error handling of kvmppc_xive_cpu_connect()
spapr: Simplify error handling in spapr_phb_realize()
spapr/xive: Convert KVM device fd checks to assert()
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers
ppc/xive: Rework setup of XiveSource::esb_mmio
target/ppc: Integrate icount to purr, vtb, and tbu40
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add 5.2 machine types for arm/i440fx/q35/s390x/spapr.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200819144016.281156-1-cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When testing large LMB sizes (eg 4GB), I found a couple of places
that assume they are 32bit in size.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20200715004228.1262681-1-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
NUMA nodes corresponding to GPU memory currently have the same
affinity/distance as normal memory nodes. Add a third NUMA associativity
reference point enabling us to give GPU nodes more distance.
This is guest visible information, which shouldn't change under a
running guest across migration between different qemu versions, so make
the change effective only in new (pseries > 5.0) machine types.
Before, `numactl -H` output in a guest with 4 GPUs (nodes 2-5):
node distances:
node 0 1 2 3 4 5
0: 10 40 40 40 40 40
1: 40 10 40 40 40 40
2: 40 40 10 40 40 40
3: 40 40 40 10 40 40
4: 40 40 40 40 10 40
5: 40 40 40 40 40 10
After:
node distances:
node 0 1 2 3 4 5
0: 10 40 80 80 80 80
1: 40 10 80 80 80 80
2: 80 80 10 80 80 80
3: 80 80 80 10 80 80
4: 80 80 80 80 10 80
5: 80 80 80 80 80 10
These are the same distances as on the host, mirroring the change made
to host firmware in skiboot commit f845a648b8cb ("numa/associativity:
Add a new level of NUMA for GPU's").
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Message-Id: <20200716225655.24289-1-arbab@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace
error_setg(&err, ...);
error_propagate(errp, err);
by
error_setg(errp, ...);
Related pattern:
if (...) {
error_setg(&err, ...);
goto out;
}
...
out:
error_propagate(errp, err);
return;
When all paths to label out are that way, replace by
if (...) {
error_setg(errp, ...);
return;
}
and delete the label along with the error_propagate().
When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.
foo(..., &err);
if (err) {
goto out;
}
...
bar(..., &err);
out:
error_propagate(errp, err);
return;
move the error_propagate() to where it's needed, like
if (...) {
foo(..., &err);
error_propagate(errp, err);
return;
}
...
bar(..., errp);
return;
and transform the error_setg() as above.
In some places, the transformation results in obviously unnecessary
error_propagate(). The next few commits will eliminate them.
Bonus: the elimination of gotos will make later patches in this series
easier to review.
Candidates for conversion tracked down with this Coccinelle script:
@@
identifier err, errp;
expression list args;
@@
- error_setg(&err, args);
+ error_setg(errp, args);
... when != err
error_propagate(errp, err);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
qbus_set_hotplug_handler() is a simple wrapper around
object_property_set_link().
object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails. These are all programming
errors here, so passing &error_abort to qbus_set_hotplug_handler() is
appropriate.
Most of its callers do. Exceptions:
* pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL,
i.e. they ignore errors.
* spapr_machine_init() passes &error_fatal.
* s390_pcihost_realize(), virtio_serial_device_realize(),
s390_pcihost_plug() pass the error to their callers. The latter two
keep going after the error, which looks wrong.
Drop the @errp parameter, and instead pass &error_abort to
object_property_set_link().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
spapr_machine_init() leaks an Error object when
kvmppc_check_papr_resize_hpt() fails and spapr->resize_hpt is
SPAPR_RESIZE_HPT_DISABLED, i.e. when the host doesn't support hash
page table resizing, and the user didn't ask for it. As harmless as
memory leaks can possibly be. Plug it.
Fixes: 30f4b05bd0
Cc: David Gibson <dgibson@redhat.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200630090351.1247703-8-armbru@redhat.com>
Deprecation period is run out and it's a time to flip the switch
introduced by cd5ff8333a. Disable legacy option for new machine
types (since 5.1) and amend documentation.
'-numa node,memdev' shall be used instead of disabled option
with new machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200609135635.761587-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO()
can; they abort on error.
To clean up this inconsistency, rename qdev_prop_set_drive() to
qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that
aborts on error.
Coccinelle script to update callers:
@ depends on !(file in "hw/core/qdev-properties-system.c")@
expression dev, name, value;
symbol error_abort;
@@
- qdev_prop_set_drive(dev, name, value, &error_abort);
+ qdev_prop_set_drive(dev, name, value);
@@
expression dev, name, value, errp;
@@
- qdev_prop_set_drive(dev, name, value, errp);
+ qdev_prop_set_drive_err(dev, name, value, errp);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
On reboot, all memory that was previously added using object_add and
device_add is placed in this DIMM area.
The new SPAPR_LMB_FLAGS_HOTREMOVABLE flag helps Linux to put this memory in
the correct memory zone, so no unmovable allocations are made there,
allowing the object to be easily hot-removed by device_del and
object_del.
This new flag was accepted in Power Architecture documentation.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20200511200201.58537-1-leobras.c@gmail.com>
[dwg: Fixed syntax error spotted by Cédric Le Goater]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The DEVICE() macro is defined as:
#define DEVICE(obj) OBJECT_CHECK(DeviceState, (obj), TYPE_DEVICE)
which expands to:
((DeviceState *)object_dynamic_cast_assert((Object *)(obj), (name),
__FILE__, __LINE__,
__func__))
This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.
Remove the unnecessary DEVICE() casts when we already know the
pointer is of DeviceState type.
Patch created mechanically using spatch with this script:
@@
typedef DeviceState;
DeviceState *s;
@@
- DEVICE(s)
+ s
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-4-f4bug@amsat.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
-----BEGIN PGP SIGNATURE-----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=INvG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200507' into staging
ppc patch queue for 2020-04-07
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
# gpg: Signature made Thu 07 May 2020 06:00:55 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.1-20200507:
target-ppc: fix rlwimi, rlwinm, rlwnm for Clang-9
spapr_nvdimm: Tweak error messages
spapr_nvdimm.c: make 'label-size' mandatory
target/ppc: Add support for Radix partition-scoped translation
target/ppc: Rework ppc_radix64_walk_tree() for partition-scoped translation
target/ppc: Extend ppc_radix64_check_prot() with a 'partition_scoped' bool
target/ppc: Introduce ppc_radix64_xlate() for Radix tree translation
spapr: Don't allow unplug of NVLink2 devices
target/ppc: Assert if HV mode is set when running under a pseries machine
target/ppc: Introduce a relocation bool in ppc_radix64_handle_mmu_fault()
target/ppc: Enforce that the root page directory size must be at least 5
spapr: Drop CAS reboot flag
spapr/cas: Separate CAS handling from rebuilding the FDT
spapr: Simplify selection of radix/hash during CAS
ppc/pnv: Add support for NMI interface
ppc/spapr: tweak change system reset helper
spapr: Don't check capabilities removed between CAS calls
target/ppc: Improve syscall exception logging
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CAS reboot flag is false by default and all the locations that
could set it to true have been dropped. This means that all code
blocks depending on the flag being set is dead code and the other
code blocks should be executed always.
Just do that and drop the now uneeded CAS reboot flag. Fix a
comment on the way to make checkpatch happy.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994893.478799.11772512888322840990.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment "ibm,client-architecture-support" ("CAS") is implemented
in SLOF and QEMU assists via the custom H_CAS hypercall which copies
an updated flatten device tree (FDT) blob to the SLOF memory which
it then uses to update its internal tree.
When we enable the OpenFirmware client interface in QEMU, we won't need
to copy the FDT to the guest as the client is expected to fetch
the device tree using the client interface.
This moves FDT rebuild out to a separate helper which is going to be
called from the "ibm,client-architecture-support" handler and leaves
writing FDT to the guest in the H_CAS handler.
This should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200310050733.29805-3-aik@ozlabs.ru>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994229.478799.2178881312094922324.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The guest can select the MMU mode by setting bits 0-1 of byte 24
in OV5 to to 0b00 for hash or 0b01 for radix. As required by the
architecture, we terminate the boot process if any other value
is found there.
The usual way to negotiate features in OV5 is basically ANDing
the bitfield provided by the guest and the bitfield of features
supported by QEMU, previously populated at machine init.
For some not documented reason, MMU is treated differently : bit 1
of byte 24 (the radix/hash bit) is cleared from the guest OV5 and
explicitely set in the final negotiated OV5 if radix was requested.
Since the only expected input from the guest is the radix/hash bit
being set or not, it seems more appropriate to handle this like we
do for XIVE.
Set the radix bit in spapr->ov5 at machine init if it has a chance
to work (ie. power9, either TCG or a radix capable KVM) and rely
exclusively on spapr_ovec_intersect() to set the radix bit in
spapr->ov5_cas.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514993621.478799.4204740354545734293.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than have the helper take an optional vector address
override, instead have its caller modify env->nip itself.
This is more consistent when adding pnv nmi support, and also
with mce injection added later.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200325144147.221875-2-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl5wnnsACgkQbDjKyiDZ
s5JdpQ//eY/AOTs09UhvKxt8DN7lC2WyHGxYSncb2Tj2zaJyPPX9p296IDBMw+KX
Cafr6LzwLjpcpOyf/EWzg7qYGbNYoYgRWoOkHI/9pHsrIH3ZvhmnyTVQI5CffeEb
EDDXJUQo/2sFpAGeODr5zz+zAQUGzt6ZZUxAiQAF9RYc9ohUGD2x5c86Asx6ZTZo
/14bd3qnrcy1x+TxDetb1idFxFr2DsdYqpHAi88zHm+UaWzxYrb7kakd+YbqI24N
tYryf5SdtGrWAAdF/7nq2PQJFzskx+t0QearU+ruovRydxYbUtBpkr5HauoVuQXR
LiV270sDYDS/D1vvQQKzLxkUuvWmbZ0rB+2BAtS1rwq2sOKqYyQEAkTWfGtSXcf8
7fuZm2i1G78MuYGTOLCrF1u0owUB3QYHvt1NUW09GyWS8X3mahtj2fRe1RtPV/5d
NL217bcd32fkMoGCg/lFvK9sCQzR6zJGKkJvOGMVW4ahHCLixpjIWabWtdXjfguT
UahRPvlX7fzeVT+DISfjqyxwL+THnTvB3CTMWG2cktf0K1ke4SXcQ0mPyksN1NuC
QocfPCr1TN2ri8g9dAPwQmOkojnNs9izpIWRYSl3avTJFNseNPxuHQALXj2Y3Y/O
EoYxLN+cqPukQ1O3GxEj5QMKe8V/0986mxWnuS/dMohQOoy+zV4=
=BPnR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200317' into staging
ppc patch queue 2020-03-17
Here's my final pull request for the qemu-5.0 soft freeze. Sorry this
is just under the wire - I hit some last minute problems that took a
while to fix up and retest.
Highlights are:
* Numerous fixes for the FWNMI feature
* A handful of cleanups to the device tree construction code
* Numerous fixes for the spapr-vscsi device
* A number of fixes and cleanups for real mode (MMU off) softmmu
handling
* Fixes for handling of the PAPR RMA
* Better handling of hotplug/unplug events during boot
* Assorted other fixes
# gpg: Signature made Tue 17 Mar 2020 09:55:07 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200317: (45 commits)
pseries: Update SLOF firmware image
ppc/spapr: Ignore common "ibm,nmi-interlock" Linux bug
ppc/spapr: Implement FWNMI System Reset delivery
target/ppc: allow ppc_cpu_do_system_reset to take an alternate vector
ppc/spapr: Allow FWNMI on TCG
ppc/spapr: Fix FWNMI machine check interrupt delivery
ppc/spapr: Add FWNMI System Reset state
ppc/spapr: Change FWNMI names
ppc/spapr: Fix FWNMI machine check failure handling
spapr: Rename DT functions to newer naming convention
spapr: Move creation of ibm,architecture-vec-5 property
spapr: Move creation of ibm,dynamic-reconfiguration-memory dt node
spapr/rtas: Reserve space for RTAS blob and log
pseries: Update SLOF firmware image
ppc/spapr: Move GPRs setup to one place
target/ppc: Fix rlwinm on ppc64
spapr/xive: use SPAPR_IRQ_IPI to define IPI ranges exposed to the guest
hw/scsi/spapr_vscsi: Convert debug fprintf() to trace event
hw/scsi/spapr_vscsi: Prevent buffer overflow
hw/scsi/spapr_vscsi: Do not mix SRP IU size with DMA buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PAPR requires that if "ibm,nmi-register" succeeds, then the hypervisor
delivers all system reset and machine check exceptions to the registered
addresses.
System Resets are delivered with registers set to the architected state,
and with no interlock.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-8-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Provide for an alternate delivery location, -1 defaults to the
architected address.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-7-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The FWNMI option must deliver system reset interrupts to their
registered address, and there are a few constraints on the handler
addresses specified in PAPR. Add the system reset address state and
checks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-4-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviwed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The option is called "FWNMI", and it involves more than just machine
checks, also machine checks can be delivered without the FWNMI option,
so re-name various things to reflect that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200316142613.121089-3-npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In the spapr code we've been gradually moving towards a convention that
functions which create pieces of the device tree are called spapr_dt_*().
This patch speeds that along by renaming most of the things that don't yet
match that so that they do.
For now we leave the *_dt_populate() functions which are actual methods
used in the DRCClass::dt_populate method.
While we're there we remove a few comments that don't really say anything
useful.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
This is currently called from spapr_dt_cas_updates() which is a hang
over from when we created this only as a diff to the DT at CAS time.
Now that we fully rebuild the DT at CAS time, just create it along
with the rest of the properties in /chosen.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently this node with information about hotpluggable memory is created
from spapr_dt_cas_updates(). But that's just a hangover from when we
created it only as a diff to the device tree at CAS time. Now that we
fully rebuild the DT as CAS time, it makes more sense to create this along
with the rest of the memory information in the device tree.
So, move it to spapr_populate_memory(). The patch is huge, but it's nearly
all just code motion.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
At the moment SLOF reserves space for RTAS and instantiates the RTAS blob
which is 20 bytes binary blob calling an hypercall. The rest of the RTAS
area is a log which SLOF has no idea about but QEMU does.
This moves RTAS sizing to QEMU and this overrides the size from SLOF.
The only remaining problem is that SLOF copies the number of bytes it
reserved (2KB for now) so QEMU needs to reserve at least this much;
SLOF will be fixed separately to check that rtas-size from QEMU is
enough for those 20 bytes for the H_RTAS hcall.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200316011841.99970-1-aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment "pseries" starts in SLOF which only expects the FDT blob
pointer in r3. As we are going to introduce a OpenFirmware support in
QEMU, we will be booting OF clients directly and these expect a stack
pointer in r1, Linux looks at r3/r4 for the initramdisk location
(although vmlinux can find this from the device tree but zImage from
distro kernels cannot).
This extends spapr_cpu_set_entry_state() to take more registers. This
should cause no behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200310050733.29805-2-aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the calculation of the Real Mode Area (RMA) size into a helper
function. While we're there clean it up and correct it in a few ways:
* Add comments making it clearer where the various constraints come from
* Remove a pointless check that the RMA fits within Node 0 (we've just
clamped it so that it does)
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In spapr_machine_init() we clamp the size of the RMA to 16GiB and the
comment saying why doesn't make a whole lot of sense. In fact, this was
done because the real mode handling code elsewhere limited the RMA in TCG
mode to the maximum value configurable in LPCR[RMLS], 16GiB.
But,
* Actually LPCR[RMLS] has been able to encode a 256GiB size for a very
long time, we just didn't implement it properly in the softmmu
* LPCR[RMLS] shouldn't really be relevant anyway, it only was because we
used to abuse the RMOR based translation mode in order to handle the
fact that we're not modelling the hypervisor parts of the cpu
We've now removed those limitations in the modelling so the 16GiB clamp no
longer serves a function. However, we can't just remove the limit
universally: that would break migration to earlier qemu versions, where
the 16GiB RMLS limit still applies, no matter how bad the reasons for it
are.
So, we replace the 16GiB clamp, with a clamp to a limit defined in the
machine type class. We set it to 16 GiB for machine types 4.2 and earlier,
but set it to 0 meaning unlimited for the new 5.0 machine type.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Real Mode Area (RMA) is the part of memory which a guest can access
when in real (MMU off) mode. Of course, for a guest under KVM, the MMU
isn't really turned off, it's just in a special translation mode - Virtual
Real Mode Area (VRMA) - which looks like real mode in guest mode.
The mechanics of how this works when using the hash MMU (HPT) put a
constraint on the size of the RMA, which depends on the size of the
HPT. So, the latter part of spapr_setup_hpt_and_vrma() clamps the RMA
we advertise to the guest based on this VRMA limit.
There are several things wrong with this:
1) spapr_setup_hpt_and_vrma() doesn't actually clamp, it takes the minimum
of Node 0 memory size and the VRMA limit. That will *often* work the
same as clamping, but there can be other constraints on RMA size which
supersede Node 0 memory size. We have real bugs caused by this
(currently worked around in the guest kernel)
2) Some callers of spapr_setup_hpt_and_vrma() are in a situation where
we're past the point that we can actually advertise an RMA limit to the
guest
3) But most fundamentally, the VRMA limit depends on host configuration
(page size) which shouldn't be visible to the guest, but this partially
exposes it. This can cause problems with migration in certain edge
cases, although we will mostly get away with it.
In practice, this clamping is almost never applied anyway. With 64kiB
pages and the normal rules for sizing of the HPT, the theoretical VRMA
limit will be 4x(guest memory size) and so never hit. It will hit with
4kiB pages, where it will be (guest memory size)/4. However all mainstream
distro kernels for POWER have used a 64kiB page size for at least 10 years.
So, simply replace this logic with a check that the RMA we've calculated
based only on guest visible configuration will fit within the host implied
VRMA limit. This can break if running HPT guests on a host kernel with
4kiB page size. As noted that's very rare. There also exist several
possible workarounds:
* Change the host kernel to use 64kiB pages
* Use radix MMU (RPT) guests instead of HPT
* Use 64kiB hugepages on the host to back guest memory
* Increase the guest memory size so that the RMA hits one of the fixed
limits before the RMA limit. This is relatively easy on POWER8 which
has a 16GiB limit, harder on POWER9 which has a 1TiB limit.
* Use a guest NUMA configuration which artificially constrains the RMA
within the VRMA limit (the RMA must always fit within Node 0).
Previously, on KVM, we also temporarily reduced the rma_size to 256M so
that the we'd load the kernel and initrd safely, regardless of the VRMA
limit. This was a) confusing, b) could significantly limit the size of
images we could load and c) introduced a behavioural difference between
KVM and TCG. So we remove that as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
This function calculates the maximum size of the RMA as implied by the
host's page size of structure of the VRMA (there are a number of other
constraints on the RMA size which will supersede this one in many
circumstances).
The current interface takes the current RMA size estimate, and clamps it
to the VRMA derived size. The only current caller passes in an arguably
wrong value (it will match the current RMA estimate in some but not all
cases).
We want to fix that, but for now just keep concerns separated by having the
KVM helper function just return the VRMA derived limit, and let the caller
combine it with other constraints. We call the new function
kvmppc_vrma_limit() to more clearly indicate its limited responsibility.
The helper should only ever be called in the KVM enabled case, so replace
its !CONFIG_KVM stub with an assert() rather than a dummy value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cedric Le Goater <clg@fr.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
MIN_RMA_SLOF records the minimum about of RMA that the SLOF firmware
requires. It lets us give a meaningful error if the RMA ends up too small,
rather than just letting SLOF crash.
It's currently stored as a number of megabytes, which is strange for global
constants. Move that megabyte scaling into the definition of the constant
like most other things use.
Change from M to MiB in the associated message while we're at it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Several objects implemented their own uint property getters and setters,
despite them being straightforward (without any checks/validations on
the values themselves) and identical across objects. This makes use of
an enhanced API for object_property_add_uintXX_ptr() which offers
default setters.
Some of these setters used to update the value even if the type visit
failed (eg. because the value being set overflowed over the given type).
The new setter introduces a check for these errors, not updating the
value if an error occurred. The error is propagated.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no good reason for it to be type int, change it to bool.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200207161948.15972-3-philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory)
and consolidates it around hostmem backend. It allows to
* resolve conflicts between global -mem-prealloc and hostmem's "policy" option,
fixing premature allocation before binding policy is applied
* simplify complicated memory allocation routines which had to deal with 2 ways
to allocate RAM.
* reuse hostmem backends of a choice for main RAM without adding extra CLI
options to duplicate hostmem features. A recent case was -mem-shared, to
enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)
* move RAM allocation from individual boards into generic machine code and
provide them with prepared MemoryRegion.
* clean up deprecated NUMA features which were tied to the old API (see patches)
- "numa: remove deprecated -mem-path fallback to anonymous RAM"
- (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types"
- (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes"
Introduce a new machine.memory-backend property and wrapper code that aliases
global -mem-path and -mem-alloc into automatically created hostmem backend
properties (provided memory-backend was not set explicitly given by user).
A bulk of trivial patches then follow to incrementally convert individual
boards to using machine.memory-backend provided MemoryRegion.
Board conversion typically involves:
* providing MachineClass::default_ram_size and MachineClass::default_ram_id
so generic code could create default backend if user didn't explicitly provide
memory-backend or -m options
* dropping memory_region_allocate_system_memory() call
* using convenience MachineState::ram MemoryRegion, which points to MemoryRegion
allocated by ram-memdev
On top of that for some boards:
* missing ram_size checks are added (typically it were boards with fixed ram size)
* ram_size fixups are replaced by checks and hard errors, forcing user to
provide correct "-m" values instead of ignoring it and continuing running.
After all boards are converted, the old API is removed and memory allocation
routines are cleaned up.
This allows moving the kernel in the guest memory. The option is useful
for step debugging (as Linux is linked at 0x0); it also allows loading
grub which is normally linked to run at 0x20000.
This uses the existing kernel address by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200203032943.121178-6-aik@ozlabs.ru>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm
device interface in QEMU to support virtual NVDIMM devices for Power.
Create the required DT entries for the device (some entries have
dummy values right now).
The patch creates the required DT node and sends a hotplug
interrupt to the guest. Guest is expected to undertake the normal
DR resource add path in response and start issuing PAPR SCM hcalls.
The device support is verified based on the machine version unlike x86.
This is how it can be used ..
Ex :
For coldplug, the device to be added in qemu command line as shown below
-object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
-device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
For hotplug, the device to be added from monitor as below
object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[Early implementation]
Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are going to add more init for the latest machine, so move the setup
to a function so we don't have to change the DEFINE_SPAPR_MACHINE macro
each time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200207064628.1196095-1-mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-68-imammedo@redhat.com>
This patch sets the default value of SPAPR_CAP_FWNMI_MCE
to SPAPR_CAP_ON for machine type 5.0.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Message-Id: <20200130184423.20519-8-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch includes migration support for machine check
handling. Especially this patch blocks VM migration
requests until the machine check error handling is
complete as these errors are specific to the source
hardware and is irrelevant on the target hardware.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
[Do not set FWNMI cap in post_load, now its done in .apply hook]
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Message-Id: <20200130184423.20519-7-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Memory error such as bit flips that cannot be corrected
by hardware are passed on to the kernel for handling.
If the memory address in error belongs to guest then
the guest kernel is responsible for taking suitable action.
Patch [1] enhances KVM to exit guest with exit reason
set to KVM_EXIT_NMI in such cases. This patch handles
KVM_EXIT_NMI exit.
[1] https://www.spinics.net/lists/kvm-ppc/msg12637.html
(e20bbd3d and related commits)
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200130184423.20519-4-ganeshgr@linux.ibm.com>
[dwg: #ifdefs to fix compile for 32-bit target]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce fwnmi an spapr capability and add a helper function
which tries to enable it, which would be used by following patch
of the series. This patch by itself does not change the existing
behavior.
Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com>
[eliminate cap_ppc_fwnmi, add fwnmi cap to migration state
and reprhase the commit message]
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200130184423.20519-3-ganeshgr@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For POWER9 DD2.2 cpus, the best current Spectre v2 indirect branch
mitigation is "count cache disabled", which is configured with:
-machine cap-ibs=fixed-ccd
However, this option isn't available on DD2.3 CPUs with KVM, because they
don't have the count cache disabled.
For POWER9 DD2.3 cpus, it is "count cache flush with assist", configured
with:
-machine cap-ibs=workaround,cap-ccf-assist=on
However this option isn't available on DD2.2 CPUs with KVM, because they
don't have the special CCF assist instruction this relies on.
On current machine types, we default to "count cache flush w/o assist",
that is:
-machine cap-ibs=workaround,cap-ccf-assist=off
This runs, with mitigation on both DD2.2 and DD2.3 host cpus, but has a
fairly significant performance impact.
It turns out we can do better. The special instruction that CCF assist
uses to trigger a count cache flush is a no-op on earlier CPUs, rather than
trapping or causing other badness. It doesn't, of itself, implement the
mitigation, but *if* we have count-cache-disabled, then the count cache
flush is unnecessary, and so using the count cache flush mitigation is
harmless.
Therefore for the new pseries-5.0 machine type, enable cap-ccf-assist by
default. Along with that, suppress throwing an error if cap-ccf-assist
is selected but KVM doesn't support it, as long as KVM *is* giving us
count-cache-disabled. To allow TCG to work out of the box, even though it
doesn't implement the ccf flush assist, downgrade the error in that case to
a warning. This matches several Spectre mitigations where we allow TCG
to operate for debugging, since we don't really make guarantees about TCG
security properties anyway.
While we're there, make the TCG warning for this case match that for other
mitigations.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
While loading the executable, some platforms (like AVR) need to
detect CPU type that executable is built for - and, with this patch,
this is enabled by reading the field 'e_flags' of the ELF header of
the executable in question. The change expands functionality of
the following functions:
- load_elf()
- load_elf_as()
- load_elf_ram()
- load_elf_ram_sym()
The argument added to these functions is called 'pflags' and is of
type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word'
being the type of the field 'e_flags', in both 32-bit and 64-bit
variants of ELF header). Callers are allowed to pass NULL as that
argument, and in such case no lookup to the field 'e_flags' will
happen, and no information will be returned, of course.
CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
CC: Michael Walle <michael@walle.cc>
CC: Thomas Huth <huth@tuxfamily.org>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
CC: Aurelien Jarno <aurelien@aurel32.net>
CC: Jia Liu <proljc@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: BALATON Zoltan <balaton@eik.bme.hu>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
CC: Fabien Chouteau <chouteau@adacore.com>
CC: KONRAD Frederic <frederic.konrad@adacore.com>
CC: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
spapr_match_nvt() is a XIVE operation and is used by the machine to
look for a matching target when an event notification is being
delivered. An assert checks that spapr_match_nvt() is called only when
the machine has selected the XIVE interrupt mode but it is redundant
with the XIVE_PRESENTER() dynamic cast.
Apply the cast to spapr->active_intc and remove the assert.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200106163207.4608-1-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
'out' can be replaced by 'return' with the appropriate
return value.
CC: David Gibson <david@gibson.dropbear.id.au>
CC: qemu-ppc@nongnu.org
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200106182425.20312-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A pseries guest can be run as a secure guest on Ultravisor-enabled
POWER platforms. When such a secure guest is reset, we need to
release/reset a few resources both on ultravisor and hypervisor side.
This is achieved by invoking this new ioctl KVM_PPC_SVM_OFF from the
machine reset path.
As part of this ioctl, the secure guest is essentially transitioned
back to normal mode so that it can reboot like a regular guest and
become secure again.
This ioctl has no effect when invoked for a normal guest. If this ioctl
fails for a secure guest, the guest is terminated.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20191219031445.8949-3-bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
