Add VSX, DFP and ISA 2.06 to the bits identified in the AT_HWCAP
entry of the AUXV.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Decimal Floating Point is emulated, so add it the mask. This will
fix the erroneous message:
Warning: Disabling some instructions which are not emulated by TCG (0x0, 0x4)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Set the AT_ICACHEBSIZE and AT_DCACHEBSIZE entries of the AUXV to match the
CPU model's cache line sizes. This fixes memory clobbering problems on more
recent Book 3s implementations; memset(p, 0, N) will use the dcbz instruction
when N is sufficiently large and many of the newer server CPUs have cache lines
sizes of 128 bytes.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Although we defined an eepro100_mdi_mask[] array indicating which bits
in the registers are read-only, we weren't actually doing anything with
it. Make the MDI register-write code use it rather than manually making
register 1 read-only and leaving the rest as reads-as-written. (The
special-case handling of register 0 remains as before since its mask is
all-zeros and the special casing happens before we apply the masking.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402159924-13853-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add code that allows us to start from two further ECKD DASD disk
layouts: LDL (Linux disk layout) and CMS (cms-formatted disk).
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add code that allows us to start from ECKD DASD using the z/OS
compatible disk layout (CDL), which is the most common format for ECKD
DASD.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move the scsi-disk specific ipl code from zipl_load() into a new
function ipl_scsi(). This makes it easier to add ipl routines for other
disk types.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Factor out helper function for dumping a hex value into a buffer.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Use the virtio device's configuration to figure out the disk geometry
and use a sector size based upon the layout.
[CH: s/SECTOR_SIZE/MAX_SECTOR_SIZE/g]
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add declarations to describe structure of different dasd IPL sources
(eckd and fba). Move the structure definitions to a new header bootmap.h.
While we are at it, change structs to typedefs.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If 'base' is smaller than the overlay image being committed into it,
then the base image will be grown in commit_run via bdrv_truncate().
This tests to make sure that this works, and the bdrv_truncate() is
not blocked when it shouldn't be.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we check for the RESIZE blocker in bdrv_truncate(), that means a
commit will fail if the overlay layer is larger than the base, due to
the backing blocker.
This is a regression in behavior from 2.0; currently, commit will try to
grow the size of the base image to match the overlay size, if the
overlay size is larger.
By moving this into the QMP command qmp_block_resize(), it allows
usage of bdrv_truncate() within block jobs.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It indicates the number of elements in ncs field and makes sense to have
int inside NICPeers. Also in parse_netdev we do not need to access
container and work with NICPeers only.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This transport allows to connect a QEMU nic to a static Ethernet
over L2TPv3 tunnel. The transport supports all options present
in the Linux kernel implementation. It allows QEMU to connect
to any Linux host running kernel 3.3+, most routers and network
devices as well as other QEMU instances.
[Fixed up net_client_init1() switch statement to support -netdev
--Stefan]
Signed-off-by: Anton Ivanov <antivano@cisco.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
initialize fd and ctlfd, and close them at the end
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When running a libvirt test suite I've noticed the qemu-img is
crashing occasionally. Tracing the problem down led me to the
following valgrind output:
qemu.git $ valgrind -q ./qemu-img create -f qed -obacking_file=/dev/null,backing_fmt=raw qed
==14881== Invalid write of size 8
==14881== at 0x1D263F: qemu_opts_create (qemu-option.c:692)
==14881== by 0x130782: bdrv_img_create (block.c:5531)
==14881== by 0x118DE0: img_create (qemu-img.c:462)
==14881== by 0x11E7E4: main (qemu-img.c:2830)
==14881== Address 0x11fedd38 is 24 bytes inside a block of size 232 free'd
==14881== at 0x4C2CA5E: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==14881== by 0x592D35E: g_realloc (in /usr/lib64/libglib-2.0.so.0.3800.2)
==14881== by 0x1D38D8: qemu_opts_append (qemu-option.c:1129)
==14881== by 0x13075E: bdrv_img_create (block.c:5528)
==14881== by 0x118DE0: img_create (qemu-img.c:462)
==14881== by 0x11E7E4: main (qemu-img.c:2830)
==14881==
Formatting 'qed', fmt=qed size=0 backing_file='/dev/null' backing_fmt='raw' cluster_size=65536
==14881== Invalid write of size 8
==14881== at 0x1D28BE: qemu_opts_del (qemu-option.c:750)
==14881== by 0x130BF3: bdrv_img_create (block.c:5638)
==14881== by 0x118DE0: img_create (qemu-img.c:462)
==14881== by 0x11E7E4: main (qemu-img.c:2830)
==14881== Address 0x11fedd38 is 24 bytes inside a block of size 232 free'd
==14881== at 0x4C2CA5E: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==14881== by 0x592D35E: g_realloc (in /usr/lib64/libglib-2.0.so.0.3800.2)
==14881== by 0x1D38D8: qemu_opts_append (qemu-option.c:1129)
==14881== by 0x13075E: bdrv_img_create (block.c:5528)
==14881== by 0x118DE0: img_create (qemu-img.c:462)
==14881== by 0x11E7E4: main (qemu-img.c:2830)
==14881==
The problem is apparently in the qemu_opts_append(). Well, if it
gets called twice or more. On the first call, when @dst is NULL
some initialization is done during which @dst->head list gets
initialized. The list is initialized in a way, so that the list
tail points at the list head. However, the next time
qemu_opts_append() is called for new options to be added,
g_realloc() may move @dst to a new address making the old list tail
point at an invalid address. If that's the case, we must update the
list pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A gcc codegen bug in x86_64-w64-mingw32-gcc (GCC) 4.6.3 means that
non-debug builds of QEMU for Windows tend to assert when using
coroutines. Work around this by marking qemu_coroutine_switch
as noinline.
If we allow gcc to inline qemu_coroutine_switch into
coroutine_trampoline, then it hoists the code to get the
address of the TLS variable "current" out of the while() loop.
This is an invalid transformation because the SwitchToFiber()
call may be called when running thread A but return in thread B,
and so we might be in a different thread context each time
round the loop. This can happen quite often. Typically.
a coroutine is started when a VCPU thread does bdrv_aio_readv:
VCPU thread
main VCPU thread coroutine I/O coroutine
bdrv_aio_readv ----->
start I/O operation
thread_pool_submit_co
<------------ yields
back to emulation
Then I/O finishes and the thread-pool.c event notifier triggers in
the I/O thread. event_notifier_ready calls thread_pool_co_cb, and
the I/O coroutine now restarts *in another thread*:
iothread
main iothread coroutine I/O coroutine (formerly in VCPU thread)
event_notifier_ready
thread_pool_co_cb -----> current = I/O coroutine;
call AIO callback
But on Win32, because of the bug, the "current" being set here the
current coroutine of the VCPU thread, not the iothread.
noinline is a good-enough workaround, and quite unlikely to break in
the future.
(Thanks to Paolo Bonzini for assistance in diagnosing the problem
and providing the detailed example/ascii art quoted above.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403535303-14939-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
* Filter out MONITOR for KVM
* Fix filtering for TCG
* -cpu foo,check and -cpu foo,enforce support for TCG
* -cpu host migration support (-cpu host,migratable=no to disable)
* Add invtsc feature support
* New model: Broadwell
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=h6c5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-cpu-for-2.1' into staging
X86CPU
* Filter out MONITOR for KVM
* Fix filtering for TCG
* -cpu foo,check and -cpu foo,enforce support for TCG
* -cpu host migration support (-cpu host,migratable=no to disable)
* Add invtsc feature support
* New model: Broadwell
# gpg: Signature made Wed 25 Jun 2014 22:55:04 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-cpu-for-2.1:
target-i386: Broadwell CPU model
target-i386: Fix indentation of CPU model definitions
target-i386: Support "invariant tsc" flag
target-i386: block migration and savevm if invariant tsc is exposed
savevm: check vmsd for migratability status
target-i386: Set migratable=yes by default on "host" CPU mooel
target-i386: Add "migratable" property to "host" CPU model
target-i386: Support check/enforce flags in TCG mode, too
target-i386: Loop-based feature word filtering in TCG mode
target-i386: Loop-based copying and setting/unsetting of feature words
target-i386: Define TCG_*_FEATURES earlier in cpu.c
target-i386: Filter KVM and 0xC0000001 features on TCG
target-i386: Filter FEAT_7_0_EBX TCG features too
target-i386: Make TCG feature filtering more readable
target-i386: Isolate KVM-specific code on CPU feature filtering logic
target-i386: Pass FeatureWord argument to report_unavailable_features()
target-i386: Merge feature filtering/checking functions
target-i386: Simplify reporting of unavailable features
target-i386: kvm: Don't enable MONITOR by default on any CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Otherwise, Windows fails with a deadlock.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1403679897-11480-1-git-send-email-pbonzini@redhat.com
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only semantic change is that bs->open_flags gets BDRV_O_PROTOCOL set
now. This isn't useful, but it doesn't hurt either. The code that was
previously skipped by 'goto done' is automatically disabled because
protocol drivers don't support backing files (and if they did, this
would probably be a fix) and can't have snapshot_flags set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This recursion was introduced in commit 505d7583 in order to allow
nesting image formats. It only ever takes effect when the user
explicitly specifies a driver name and that driver isn't suitable for
the protocol level.
We can check this earlier in bdrv_open() and if the explicitly
requested driver is a format driver, clear BDRV_O_PROTOCOL so that
another bs->file layer is opened.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It doesn't do much any more, we can move the code to bdrv_open() now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves the bdrv_open_file() call a bit down so that it can use the
bdrv_open() code that selects the right block driver.
The code between the old and the new call site is either common code
(the error message for an unknown driver has been unified now) or
doesn't run with cleared BDRV_O_PROTOCOL (added an if block in one
place, whereas the right path was already asserted in another place)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
The "driver" entry in the options QDict is now only missing if we're
opening an image with format probing.
We also catch cases now where both the drv argument and a "driver"
option is specified, e.g. by specifying -drive format=qcow2,driver=raw
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The idea of bdrv_fill_options() is to convert every parameter for
opening images, in particular the filename and flags, to entries in the
options QDict.
This patch starts with moving the filename parsing and driver probing
part from bdrv_file_open() to the new function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
upcoming libnfs will feature internal readahead support.
Add a knob to pass the optional readahead value as a URL
parameter.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this patch fixes the incorrect usage of strncmp and
adds simple error checking by means of parse_uint_full
instead of atoi for the supplied URL parameters.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All behavior and invariant should hold for images with 0 length, so
add a class to repeat all the tests in TestSingleDrive.
Hide two unapplicable test methods that would fail with 0 image length
because it's also used as cluster size.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There should be a BLOCK_JOB_READY event with active commit, regardless
of image length. Let's test the 0 length image case, and make sure it
goes through the ready->complete process.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring or active committing a zero length image, BLOCK_JOB_READY
is not reported now, instead the job completes because we short circuit
the mirror job loop.
This is inconsistent with non-zero length images, and only confuses
management software.
Let's do the same thing when seeing a 0-length image: report ready
immediately; wait for block-job-cancel or block-job-complete; clear the
cancel flag as existing non-zero image synced case (cancelled after
ready); then jump to the exit.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1403683241-20678-1-git-send-email-imammedo@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will unset busy flag and put coroutine to sleep, can be used to
wait for QMP complete/cancel.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new CPU model named "Broadwell". It has all the features
from Haswell, plus PREFETCHW, RDSEED, ADX, SMAP.
PREFETCHW was already supported as "3dnowprefetch".
RDSEED, ADX was added on Linux v3.15-rc1.
SMAP was added on Linux v3.15-rc2.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Wang, Yong Y <yong.y.wang@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dugger, Donald D <donald.d.dugger@intel.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Expose "Invariant TSC" flag, if KVM is enabled. From Intel documentation:
17.13.1 Invariant TSC The time stamp counter in newer processors may
support an enhancement, referred to as invariant TSC. Processor’s
support for invariant TSC is indicated by CPUID.80000007H:EDX[8].
The invariant TSC will run at a constant rate in all ACPI P-, C-.
and T-states. This is the architectural behavior moving forward. On
processors with invariant TSC support, the OS may use the TSC for wall
clock timer services (instead of ACPI or HPET timers). TSC reads are
much more efficient and do not incur the overhead associated with a ring
transition or access to a platform resource.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
[ehabkost: redo feature filtering to use .tcg_features]
[ehabkost: add CPUID_APM_INVTSC macro, add it to .unmigratable_flags]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Invariant TSC documentation mentions that "invariant TSC will run at a
constant rate in all ACPI P-, C-. and T-states".
This is not the case if migration to a host with different TSC frequency
is allowed, or if savevm is performed. So block migration/savevm.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[AF+mtosatti: Updated error message]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Check vmsd for unmigratable field, allowing migratibility status
to be modified after vmstate_register.
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Having only migratable flags reported by default on the "host" CPU model
is safer for the following reasons:
* Existing users may expect "-cpu host" to be migration-safe, if they
take care of always using compatible host CPUs, host kernels, and
QEMU versions.
* Users who don't care aboug migration and want to enable all features
supported by the host kernel can simply change their setup to use
migratable=no.
Without this change, people using "-cpu host" will stop being able to
migrate, because now "invtsc" is getting enabled by default.
We are not setting migratable=yes by default on all X86CPU subclasses,
because users should be able to get non-migratable features enabled if
they ask for them explicitly.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This flag will allow the user to choose between two modes:
* All flags that can be enabled on the host, even if unmigratable
(migratable=no);
* All flags that can be enabled on the host, are known to QEMU
and migratable (migratable=yes).
The default is still migratable=false, to keep current behavior, but
this will be changed to migratable=true by another patch.
My plan was to support the "migratable" flag on all CPU classes, but
have the default to "false" on all CPU models except "host". However,
DeviceClass has no mechanism to allow a child class to have a different
property default from the parent class yet, so by now only the "host"
CPU model will support the "migratable" flag.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
If enforce/check is specified in TCG mode, QEMU will ensure all CPU
features are supported by TCG, so no CPU feature is silently disabled.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Be explicit about TCG vs. !KVM]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of manually filtering each feature word, add a tcg_features
field to FeatureWordInfo, and use that field to filter all feature words
in TCG mode.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that we have the feature word arrays, we don't need to manually copy
each array item, we can simply iterate through each feature word.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Those macros will be used in the feature_word_info array data, so need
to be defined earlier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tom Musta
Peter Maydell
Jens Freimann
Eugene (jno) Dvurechenski
Jeff Cody
Jiri Pirko
Anton Ivanov
Gonglei
Michal Privoznik
Paolo Bonzini
Kevin Wolf
Peter Lieven
Fam Zheng
Igor Mammedov
Eduardo Habkost
Marcelo Tosatti