Commit Graph

53 Commits

Author SHA1 Message Date
Peter Xu be933ffc23 monitor: new parameter "x-oob"
Add new parameter to optionally enable Out-Of-Band for a QMP server.

An example command line:

  ./qemu-system-x86_64 -chardev stdio,id=char0 \
                       -mon chardev=char0,mode=control,x-oob=on

By default, Out-Of-Band is off.

It is not allowed if either MUX or non-QMP is detected, since
Out-Of-Band is currently only for QMP, and non-MUX chardev backends.

Note that the client STILL has to request 'oob' during qmp_capabilities;
in part because the x-oob command line option may disappear in the
future if we decide the capabilities negotiation is sufficient.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-4-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: enhance commit message]
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-27 10:17:45 -05:00
Peter Xu 6adf08dd42 monitor: unify global init
There are many places where the monitor initializes its globals:

- monitor_init_qmp_commands() at the very beginning
- single function to init monitor_lock
- in the first entry of monitor_init() using "is_first_init"

Unify them a bit.

monitor_lock is not used before monitor_init() (as confirmed by code
analysis and gdb watchpoints); so we are safe delaying what was a
constructor-time initialization of the mutex into the later first call
to monitor_init().

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Markus Armbruster 112ed241f5 qapi: Empty out qapi-schema.json
The previous commit improved compile time by including less of the
generated QAPI headers.  This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.

Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.

It's possible everywhere, except:

* monitor.c needs qmp-command.h to get qmp_init_marshal()

* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
  qapi-event.h to get enum QAPIEvent

Perhaps we'll get rid of those some other day.

Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Markus Armbruster 9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Markus Armbruster 452fcdbc49 Include qapi/qmp/qdict.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Daniel P. Berrange 788cf9f8c8 block: rip out all traces of password prompting
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Markus Armbruster 0587568780 qmp: Dumb down how we run QMP command registration
The way we get QMP commands registered is high tech:

* qapi-commands.py generates qmp_init_marshal() that does the actual work

* it also generates the magic to register it as a MODULE_INIT_QAPI
  function, so it runs when someone calls
  module_call_init(MODULE_INIT_QAPI)

* main() calls module_call_init()

QEMU needs to register a few non-qapified commands.  Same high tech
works: monitor.c has its own qmp_init_marshal() along with the magic
to make it run in module_call_init(MODULE_INIT_QAPI).

QEMU also needs to unregister commands that are not wanted in this
build's configuration (commit 5032a16).  Simple enough:
qmp_unregister_commands_hack().  The difficulty is to make it run
after the generated qmp_init_marshal().  We can't simply run it in
monitor.c's qmp_init_marshal(), because the order in which the
registered functions run is indeterminate.  So qmp_init_marshal()
registers qmp_unregister_commands_hack() separately.  Since
registering *appends* to the list of registered functions, this will
make it run after all the functions that have been registered already.

I suspect it takes a long and expensive computer science education to
not find this silly.

Dumb it down as follows:

* Drop MODULE_INIT_QAPI entirely

* Give the generated qmp_init_marshal() external linkage.

* Call it instead of module_call_init(MODULE_INIT_QAPI)

* Except in QEMU proper, call new monitor_init_qmp_commands() that in
  turn calls the generated qmp_init_marshal(), registers the
  additional commands and unregisters the unwanted ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
2017-03-05 09:02:10 +01:00
Marc-André Lureau 0ec7b3e7f2 char: rename CharDriverState Chardev
Pick a uniform chardev type name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:59 +01:00
Juergen Gross ce49b734b4 qdev: add function qdev_set_id()
In order to have an easy way to add a new qdev with a specific id
carve out the needed functionality from qdev_device_add() into a new
function qdev_set_id().

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-11-22 10:29:37 -08:00
Marc-André Lureau bdbcb547cf monitor: deprecate 'default' option
This option does nothing since commit 06ac27f.  Deprecate it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28 18:17:23 +03:00
Marc-André Lureau 2ef45716e1 monitor: fix crash when leaving qemu with spice audio
Since aa5cb7f5e, the chardevs are being cleaned up when leaving
qemu. However, the monitor has still references to them, which may
lead to crashes when running atexit() and trying to send monitor
events:

 #0  0x00007fffdb18f6f5 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54
 #1  0x00007fffdb1912fa in __GI_abort () at abort.c:89
 #2  0x0000555555c263e7 in error_exit (err=22, msg=0x555555d47980 <__func__.13537> "qemu_mutex_lock") at util/qemu-thread-posix.c:39
 #3  0x0000555555c26488 in qemu_mutex_lock (mutex=0x5555567a2420) at util/qemu-thread-posix.c:66
 #4  0x00005555558c52db in qemu_chr_fe_write (s=0x5555567a2420, buf=0x55555740dc40 "{\"timestamp\": {\"seconds\": 1470041716, \"microseconds\": 989699}, \"event\": \"SPICE_DISCONNECTED\", \"data\": {\"server\": {\"port\": \"5900\", \"family\": \"ipv4\", \"host\": \"127.0.0.1\"}, \"client\": {\"port\": \"40272\", \"f"..., len=240) at qemu-char.c:280
 #5  0x0000555555787cad in monitor_flush_locked (mon=0x5555567bd9e0) at /home/elmarco/src/qemu/monitor.c:311
 #6  0x0000555555787e46 in monitor_puts (mon=0x5555567bd9e0, str=0x5555567a44ef "") at /home/elmarco/src/qemu/monitor.c:353
 #7  0x00005555557880fe in monitor_json_emitter (mon=0x5555567bd9e0, data=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:401
 #8  0x00005555557882d2 in monitor_qapi_event_emit (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:472
 #9  0x000055555578838f in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0, errp=0x7fffffffca88) at /home/elmarco/src/qemu/monitor.c:497
 #10 0x0000555555c15541 in qapi_event_send_spice_disconnected (server=0x5555571139d0, client=0x5555570d0db0, errp=0x5555566c0428 <error_abort>) at qapi-event.c:1038
 #11 0x0000555555b11bc6 in channel_event (event=3, info=0x5555570d6c00) at ui/spice-core.c:248
 #12 0x00007fffdcc9983a in adapter_channel_event (event=3, info=0x5555570d6c00) at reds.c:120
 #13 0x00007fffdcc99a25 in reds_handle_channel_event (reds=0x5555567a9d60, event=3, info=0x5555570d6c00) at reds.c:324
 #14 0x00007fffdcc7d4c4 in main_dispatcher_self_handle_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:175
 #15 0x00007fffdcc7d5b1 in main_dispatcher_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:194
 #16 0x00007fffdcca7674 in reds_stream_push_channel_event (s=0x5555570d9910, event=3) at reds-stream.c:354
 #17 0x00007fffdcca749b in reds_stream_free (s=0x5555570d9910) at reds-stream.c:323
 #18 0x00007fffdccb5dad in snd_disconnect_channel (channel=0x5555576a89a0) at sound.c:229
 #19 0x00007fffdccb9e57 in snd_detach_common (worker=0x555557739720) at sound.c:1589
 #20 0x00007fffdccb9f0e in snd_detach_playback (sin=0x5555569fe3f8) at sound.c:1602
 #21 0x00007fffdcca3373 in spice_server_remove_interface (sin=0x5555569fe3f8) at reds.c:3387
 #22 0x00005555558ff6e2 in line_out_fini (hw=0x5555569fe370) at audio/spiceaudio.c:152
 #23 0x00005555558f909e in audio_atexit () at audio/audio.c:1754
 #24 0x00007fffdb1941e8 in __run_exit_handlers (status=0, listp=0x7fffdb5175d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true) at exit.c:82
 #25 0x00007fffdb194235 in __GI_exit (status=<optimized out>) at exit.c:104
 #26 0x00007fffdb17b738 in __libc_start_main (main=0x5555558d7874 <main>, argc=67, argv=0x7fffffffcf48, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffcf38) at ../csu/libc-start.c:323

Add a monitor_cleanup() functions to remove all the monitors before
cleaning up the chardev. Note that we are "losing" some events that
used to be sent during atexit().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160801112343.29082-2-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-08-08 14:16:11 +02:00
Markus Armbruster 175de52487 Clean up decorations and whitespace around header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Markus Armbruster 121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Markus Armbruster 14b6d44d47 Use scripts/clean-includes to drop redundant qemu/typedefs.h
Re-run scripts/clean-includes to apply the previous commit's
corrections and updates.  Besides redundant qemu/typedefs.h, this only
finds a redundant config-host.h include in ui/egl-helpers.c.  No idea
how that escaped the previous runs.

Some manual whitespace trimming around dropped includes squashed in.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:16 +01:00
Daniel P. Berrange 90998d5896 qom: add helpers for UserCreatable object types
The QMP monitor code has two helper methods object_add
and qmp_object_del that are called from several places
in the code (QMP, HMP and main emulator startup).

The HMP and main emulator startup code also share
further logic that extracts the qom-type & id
values from a qdict.

We soon need to use this logic from qemu-img, qemu-io
and qemu-nbd too, but don't want those to depend on
the monitor, nor do we want to duplicate the code.

To avoid this, move some code out of qmp.c and hmp.c
adding new methods to qom/object_interfaces.c

 - user_creatable_add - takes a QDict holding a full
   object definition & instantiates it
 - user_creatable_add_type - takes an ID, type name,
   and QDict holding object properties & instantiates
   it
 - user_creatable_add_opts - takes a QemuOpts holding
   a full object definition & instantiates it
 - user_creatable_add_opts_foreach - variant on
   user_creatable_add_opts which can be directly used
   in conjunction with qemu_opts_foreach.
 - user_creatable_del - takes an ID and deletes the
   corresponding object

The existing code is updated to use these new methods.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16 17:12:57 +01:00
Alexey Kardashevskiy 0a9516c2d6 monitor/target-ppc: Define target_get_monitor_def
At the moment get_monitor_def() returns only registers from statically
defined monitor_defs array. However there is a lot of BOOK3S SPRs
which are not in the list and cannot be printed from the monitor.

This adds a new target platform hook - target_get_monitor_def().
The hook is called if a register was not found in the static
array returned by the target_monitor_defs() hook.

The hook is only defined for POWERPC, it returns registered
SPRs and fails on unregistered ones providing the user with information
on what is actually supported on the running CPU. The register value is
saved as uint64_t as it is the biggest supported register size;
target_ulong cannot be used because of the stub - it is in a "common"
code and cannot include "cpu.h", etc; this is also why the hook prototype
is redefined in the stub instead of being included from some header.

This replaces static descriptors for GPRs, FPRs, SRs with a helper which
looks for a value in a corresponding array in the CPUPPCState.
The immediate effect is that all 32 SRs can be printed now (instead of 16);
later this can be reused for VSX or TM registers.

This replaces callbacks for MSR and XER with static descriptors in
monitor_defs as they are stored in CPUPPCState.

While we are here, this adds "cr" as a synonym of "ccr".

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 14:53:36 +11:00
Pavel Butsykin d665d696c5 hmp: added io apic dump state
Added the hmp command to query io apic state, may be usefull after guest
crashes to understand IRQ routing in guest.

Implementation is only for kvm here. The dump will look like
(qemu) info ioapic
ioapic id=0x00 sel=0x26 (redir[11])
pin 0  0x0000000000010000 dest=0 vec=0   active-hi edge  masked fixed  physical
pin 1  0x0000000000000031 dest=0 vec=49  active-hi edge         fixed  physical
...
pin 23 0x0000000000010000 dest=0 vec=0   active-hi edge  masked fixed  physical
IRR        (none)
Remote IRR (none)

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:42 +02:00
Pavel Butsykin 1f871d49e3 hmp: added local apic dump state
Added the hmp command to query local apic registers state, may be
usefull after guest crashes to understand IRQ routing in guest.

(qemu) info lapic
dumping local APIC state for CPU 0

LVT0    0x00010700 active-hi edge  masked                      ExtINT (vec 0)
LVT1    0x00000400 active-hi edge                              NMI
LVTPC   0x00010000 active-hi edge  masked                      Fixed  (vec 0)
LVTERR  0x000000fe active-hi edge                              Fixed  (vec 254)
LVTTHMR 0x00010000 active-hi edge  masked                      Fixed  (vec 0)
LVTT    0x000000ef active-hi edge                 one-shot     Fixed  (vec 239)
Timer   DCR=0x3 (divide by 16) initial_count = 61360
SPIV    0x000001ff APIC enabled, focus=off, spurious vec 255
ICR     0x000000fd physical edge de-assert no-shorthand
ICR2    0x00000001 cpu 1 (X2APIC ID)
ESR     0x00000000
ISR     (none)
IRR     239

APR 0x00 TPR 0x00 DFR 0x0f LDR 0x00 PPR 0x00

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-7-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:42 +02:00
Pavel Butsykin caf15319e8 monitor: make monitor_fprintf and mon_get_cpu externally visible
monitor_fprintf and mon_get_cpu will be used in the target-specific monitor,
so it is advisable to make it external.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-6-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:42 +02:00
Markus Armbruster 6eb3937e9b qom: Don't use 'gen': false for qom-get, qom-set, object-add
With the previous commit, the generated marshalers just work, and save
us a bit of handwritten code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-23-git-send-email-armbru@redhat.com>
2015-09-21 09:56:49 +02:00
Pavel Butsykin bf95728400 monitor: remove target-specific code from monitor.c
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery.  The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16 17:33:32 +02:00
Markus Armbruster a0b1a66ea3 Include monitor/monitor.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster 4629ed1e98 qerror: Finally unused, clean up
Remove it except for two things in qerror.h:

* Two #include to be cleaned up separately to avoid cluttering this
  patch.

* The QERR_ macros.  Mark as obsolete.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 485febc6d1 qmp: Wean off qerror_report()
The traditional QMP command handler interface

    int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);

doesn't provide for returning an Error object.  Instead, the handler
is expected to stash it in the monitor with qerror_report().

When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one.  More than
three years later, we're still using it.

Middle mode has two effects:

* Instead of the native input marshallers

      static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)

  it generates input marshallers conforming to the traditional QMP
  command handler interface.

* It suppresses generation of code to register them with
  qmp_register_command()

  This permits giving them internal linkage.

As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.

The former has to go to get rid of qerror_report().  Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().

Switch middle mode to generate native input marshallers, and adapt the
stragglers.  Simplifies both the monitor code and the stragglers.

Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster f006cf7fa9 qdev-monitor: Propagate errors through qdev_device_add()
Also polish an error message while I'm touching the line anyway,

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-06-22 18:20:39 +02:00
Kővágó, Zoltán 06ac27f683 audio: remove LOG_TO_MONITOR along with default_mon
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log
to the monitor before it's being initialized), and also nothing else in
qemu logs to the monitor.

This log to monitor feature was the last thing that used the default_mon
variable, so I removed it too (as using it can cause problems).

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15 12:42:48 +02:00
Markus Armbruster 489653b5db monitor: Change return type of monitor_cur_is_qmp() to bool
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 10:07:16 +02:00
Markus Armbruster 65207c59d9 monitor: Drop broken, unused asynchronous command interface
The asynchronous monitor command interface goes back to commit 940cc30
(Jan 2010).  Added a third case to command execution.  The hope back
then according to the commit message was that all commands get
converted to the asynchronous interface, killing off the other two
cases.  Didn't happen.

The initial asynchronous commands balloon and info balloon were
converted back to synchronous long ago (commit 96637bc and d72f32),
with commit messages calling the asynchronous interface "not fully
working" and "deprecated".  The only other user went away in commit
3b5704b.

New code generally uses synchronous commands and asynchronous events.

What exactly is still "not fully working" with asynchronous commands?
Well, here's a bug that defeats actual asynchronous use pretty
reliably: the reply's ID is wrong (and has always been wrong) unless
you use the command synchronously!  To reproduce, we need an
asynchronous command, so we have to go back before commit 3b5704b.
Run QEMU with spice:

    $ qemu-system-x86_64 -nodefaults -S -spice port=5900,disable-ticketing -qmp stdio
    {"QMP": {"version": {"qemu": {"micro": 94, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}

Connect a spice client in another terminal:

    $ remote-viewer spice://localhost:5900

Set up a migration destination dummy in a third terminal:

    $ socat TCP-LISTEN:12345 STDIO

Now paste the following into the QMP monitor:

    { "execute": "qmp_capabilities", "id": "i0" }
    { "execute": "client_migrate_info", "id": "i1", "arguments": { "protocol": "spice", "hostname": "localhost", "port": 12345 } }
    { "execute": "query-kvm", "id": "i2" }

Produces two replies immediately, one to qmp_capabilities, and one to
query-kvm:

    {"return": {}, "id": "i0"}
    {"return": {"enabled": false, "present": true}, "id": "i2"}

Both are correct.  Two lines of debug output from libspice-server not
shown.

Now EOF socat's standard input to make it close the connection.  This
makes the asynchronous client_migrate_info complete.  It replies:

    {"return": {}}

Bug: "id": "i1" is missing.  Two lines of debug output from
libspice-server not shown.  Cherry on top: storage for the missing ID
is leaked.

Get rid of this stuff before somebody hurts himself with it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Thomas Huth 26b93109c0 monitor: Remove unused functions
The functions ringbuf_read_completion() and monitor_get_rs()
are not used anywhere anymore, so let's remove them.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30 16:05:48 +03:00
Andreas Färber a01ff75fcd qom: Implement info qom-tree HMP command
To complement qdev's bus-oriented info qtree, info qom-tree
prints a hierarchical view of the QOM composition tree.

By default, the machine composition tree is shown. This can be overriden
by supplying a path argument, such as "info qom-tree /".

Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17 14:31:21 +01:00
Peter Maydell c5c6d7f81a Clean up around error_get_pretty(), qerror_report_err()
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU5GT/AAoJEDhwtADrkYZT6H8QAJSdCnymglYhsJ0L8Pn+mFbw
 ukAxSBjZ+XJXwSBCjSLB9e2Tb6PJZAbAdQJjmI1Ijb+3cXqjRURErTsp+Caz1pjj
 Zw4v4whxNedXl+WeZEwX7sU6WlDhMEk51E1NHssd9dyZ/noEqHiw/XzoqimaYlPK
 nrSTBZ94N+F+Daw1d/cjbRMHHGVSjpVraDEPvZIkC6Mv43dGhSdCT529FXthMpUd
 OhoaQvEdy/75RqFwd4gbjHzA2qHVVsKdq8EfDdHAlcg2LSGB8zM4LlRmYxMKmy2g
 ylZLXtm6v7Pm+tYFVdLc7xWnRIh4vFXBHFJ8O9jFXziV4Nkj7s7qXdLJXxYWfRXU
 KC4/vw9IEkHWWUtn1A69ktyPFjEcnW0ieiEOA7/2FXiH7RARnWTl/YChlQrSgSAM
 zh+/01UhHvKBkxmkJIWpHzR+70A/GyubvlrcSd0g6L+g1hXEw78aryivCoFTKocl
 MNTlI7AcaGW2qpSUn5kr99aBdKD1sSdGPbNqqZMOzUekGQHeUuNNrFlvsTibMo5G
 OikdrgygmoLHBcMCgVykYoHen5lMcz+PS5aGFoGwvMV3DQZAsAwltXGeJSNck143
 WuEatwA0PhuA0S/dZMELC27kUdsbvpBUhboHuShz4pvytihWu0HmVAWDeShd9uPB
 r/WSqvETUcdSOqExGEP2
 =g7dZ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' into staging

Clean up around error_get_pretty(), qerror_report_err()

# gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-error-2015-02-18:
  qemu-char: Avoid qerror_report_err() outside QMP command handlers
  qemu-img: Avoid qerror_report_err() outside QMP command handlers
  vl: Avoid qerror_report_err() outside QMP command handlers
  tpm: Avoid qerror_report_err() outside QMP command handlers
  numa: Avoid qerror_report_err() outside QMP command handlers
  net: Avoid qerror_report_err() outside QMP command handlers
  monitor: Avoid qerror_report_err() outside QMP command handlers
  monitor: Clean up around monitor_handle_fd_param()
  error: Use error_report_err() where appropriate
  error: New convenience function error_report_err()
  vhost-scsi: Improve error reporting for invalid vhostfd

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-26 07:01:08 +00:00
Markus Armbruster 1ce6be24df hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:50 +01:00
Markus Armbruster 1677f4c66c monitor: Clean up around monitor_handle_fd_param()
monitor_handle_fd_param() is a wrapper around
monitor_handle_fd_param2() that feeds errors to qerror_report_err()
instead of returning them.  qerror_report_err() is inappropriate in
many contexts.  monitor_handle_fd_param() looks simpler than
monitor_handle_fd_param2(), which tempts use.  Remove the temptation:
drop the wrapper and open-code the (trivial) error handling instead.

Replace the open-coded qerror_report_err() by error_report_err() in
places that already use error_report().  Turns out that's everywhere.

While there, rename monitor_handle_fd_param2() to monitor_fd_param().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18 10:51:28 +01:00
Markus Armbruster 097310b53e block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
I'll use it with block backends shortly, and the name is going to fit
badly there.  It's a block layer thing anyway, not just a block driver
thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Michael S. Tsirkin b3dd1b8c29 monitor: fix use after free
The function monitor_fdset_dup_fd_find_remove() references member of
'mon_fdset' which - when remove flag is set - may be freed in function
monitor_fdset_cleanup().
remove is set by monitor_fdset_dup_fd_remove which in practice
does not need the returned value, so make it void,
and return -1 from monitor_fdset_dup_fd_find_remove.

Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-08-18 14:39:10 -04:00
Wenchao Xia 751751732c qapi event: clean up
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Igor Mammedov 5f41fbba90 qmp: convert ACPI_DEVICE_OST event
... using new QAPI event infrastructure

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Igor Mammedov 02edd407f3 qmp: add ACPI_DEVICE_OST event handling
emits event when ACPI OSPM evaluates _OST method
of ACPI device.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Laszlo Ersek 5906366ef0 monitor: add Error-propagating monitor_handle_fd_param2()
and rebase monitor_handle_fd_param() to it. (Note that this will slightly
change the behavior when the qemu_parse_fd() branch is selected and it
fails: we now report (and in case of QMP, set) the error immediately,
rather than allowing the caller to set its own error message (if any)).

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-08 14:19:58 -04:00
Cole Robinson 4a66d3bf9a monitor: Remove unused monitor_print_filename
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:19:58 -04:00
Benoît Canet 95c6bff356 quorum: Add quorum mechanism.
This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.

If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.

Use gnutls's SHA-256 to compare versions.

--enable-quorum must be used to enable the feature.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 22:29:50 +01:00
Stefan Hajnoczi 0150cd81cf readline: move readline to a generic location
Now that the monitor and readline are decoupled, readline.h no longer
belongs in include/monitor/.  Put the header into include/qemu/.

Move the source file into util/ so it can be linked as part of
libqemuutil.a.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Stefan Hajnoczi c60bf3391b readline: decouple readline from the monitor
Make the readline.c functionality reusable.  Instead of calling
monitor_printf() and monitor_flush() directly, invoke function pointers
provided by the user.

This way readline.c does not know about Monitor and other users will be
able to make use of readline.c.

Note that there is already an "opaque" argument to the ReadLineFunc
callback.  Consistently call it "readline_opaque" from now on to
distinguish from the ReadLinePrintfFunc/ReadLineFlushFunc "opaque"
argument.

I also dropped the printf macro trickery since it's now highly unlikely
that anyone modifying readline.c would call printf(3) directly.  We no
longer need this protection.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Paolo Bonzini cff8b2c6fc monitor: add object-add (QMP) and object_add (HMP) command
Add two commands that are the monitor counterparts of -object.  The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 13:45:47 -05:00
Anthony Liguori bb7d4d82b6 Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Max Reitz (11) and others
# Via Kevin Wolf
* kwolf/for-anthony: (26 commits)
  qemu-iotests: Overlapping cluster allocations
  qcow2_check: Mark image consistent
  qcow2-refcount: Repair shared refcount blocks
  qcow2-refcount: Repair OFLAG_COPIED errors
  qcow2-refcount: Move OFLAG_COPIED checks
  qcow2: Employ metadata overlap checks
  qcow2: Metadata overlap checks
  qcow2: Add corrupt bit
  qemu-iotests: Snapshotting zero clusters
  qcow2-refcount: Snapshot update for zero clusters
  option: Add assigned flag to QEMUOptionParameter
  gluster: Abort on AIO completion failure
  block: Remove old raw driver
  switch raw block driver from "raw.o" to "raw_bsd.o"
  raw_bsd: register bdrv_raw
  raw_bsd: add raw_create_options
  raw_bsd: introduce "special members"
  raw_bsd: add raw_create()
  raw_bsd: emit debug events in bdrv_co_readv() and bdrv_co_writev()
  add skeleton for BSD licensed "raw" BlockDriver
  ...

Message-id: 1378111792-20436-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:32:46 -05:00
Max Reitz a40f1c2add qcow2: Metadata overlap checks
Two new functions are added; the first one checks a given range in the
image file for overlaps with metadata (main header, L1 tables, L2
tables, refcount table and blocks).

The second one should be used immediately before writing to the image
file as it calls the first function and, upon collision, marks the
image as corrupt and makes the BDS unusable, thereby preventing
further access.

Both functions take a bitmask argument specifying the structures which
should be checked for overlaps, making it possible to also check
metadata writes against colliding with other structures.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-30 15:48:43 +02:00
Wenchao Xia d2674b2cf7 monitor: avoid use of global *cur_mon in monitor_find_completion()
Parameter *mon is added, and local variable *mon added in previous patch
is removed. The caller readline_completion(), pass rs->mon as value, which
should be initialized in readline_init() called by monitor_init().

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-30 07:41:14 -04:00
Amos Kong b1be42803b net: add support of mac-programming over macvtap in QEMU side
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.

Design:
 QEMU notifies Libvirt when rx-filter config is changed in guest,
 then Libvirt query the rx-filter information by a monitor command,
 and sync the change to macvtap device. Related rx-filter config
 of the nic contains main mac, rx-mode items and vlan table.

This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.

Test:
 If we repeatedly add/remove vlan, and change macaddr of vlan
 interfaces in guest by a loop script.

Result:
 The events will flood the QMP client(management), management takes
 too much resource to process the events.

 Event_throttle API (set rate to 1 ms) can avoid the events to flood
 QMP client, but it could cause an unexpected delay (~1ms), guests
 guests normally expect rx-filter updates immediately.

 So we use a flag for each nic to avoid events flooding, the event
 is emitted once until the query command is executed. The flag
 implementation could not introduce unexpected delay.

There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.

Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
   "additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15 21:23:08 +03:00
Hu Tao c401a8a515 add a new qevent: QEVENT_GUEST_PANICKED
This event will be emited when qemu detects guest panic.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: cf0bc45ecf9ecd3699bc72dc39f8cbab8ed79d8c.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30 10:30:01 -05:00