Commit Graph

45 Commits

Author SHA1 Message Date
David Hildenbrand b18b604334 qmp: add QMP interface "query-cpu-model-baseline"
Let's provide a standardized interface to baseline two CPU models, to
create a third, compatible one. This is especially helpful when two
CPU models are not identical, but a CPU model is required that is
guaranteed to run under both configurations, where the original models run.

"query-cpu-model-baseline" takes two CPU models and returns a third,
compatible model. The result will always be a static CPU model.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-28-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
David Hildenbrand 0031e0d683 qmp: add QMP interface "query-cpu-model-comparison"
Let's provide a standardized interface to compare two CPU models.
"query-cpu-model-compare" takes two models and returns  how they compare
in a specific configuration.

The result will give guarantees about runnability. E.g. if a CPU model A
is a subset of CPU model B, model A is guaranteed to run in configurations
where model B runs, but not the other way around (might or might not run).

Usually, CPU features or CPU generations are used to calculate the result.
If a model is not guaranteed to run in a certain environment (e.g.
incompatible), a  compatible one can be created by "baselining" both models
(follow up patch).

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-27-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
David Hildenbrand e09484efbc qmp: add QMP interface "query-cpu-model-expansion"
Let's provide a standardized interface to expand CPU models. This interface
can be used by tooling to get details about a specific CPU model in a
certain configuration, e.g. about the "host" model.

To take care of all architectures, two detail levels for an expansion
are introduced. Certain architectures might not support all detail levels.
While "full" will expand and indicate all relevant properties/features
of a CPU model, "static" expands to a static base CPU model, that will
never change between QEMU versions and therefore have the same features
when used under different compatibility machines.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-26-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
Lluís Vilanova 4815185902 trace: Add per-vCPU tracing states for events with the 'vcpu' property
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18 18:23:12 +01:00
Igor Mammedov ac35f13ba8 pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hook
Add madt_cpu callback to AcpiDeviceIfClass and use
it for generating LAPIC MADT entries for CPUs.

Later it will be used for generating x2APIC
entries in case of more than 255 CPUs and also
would be reused by ARM target when ACPI CPU hotplug
is introduced there.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:21:16 +03:00
Corey Minyard 86e91dd713 acpi: Add IPMI table entries
Use the ACPI table construction tools to create an ACPI entry
for IPMI.  This adds a function called build_acpi_ipmi_devices
to add an DSDT entry for IPMI if IPMI is compiled in and an
IPMI device exists.  It also adds a dummy function if IPMI
is not compiled in.

This conforms to section "C3-2 Locating IPMI System Interfaces in
ACPI Name Space" in the IPMI 2.0 specification.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Corey Minyard 35658f6e0c ipmi: Add SMBIOS table entry
Add an IPMI table entry to the SMBIOS.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24 05:13:57 +03:00
Fam Zheng bcd82a968f iohandler: Introduce iohandler_get_aio_context
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-22 16:43:42 +02:00
Max Reitz 262b4e8f74 block: Add bdrv_next_monitor_owned()
Add a function for iterating over all monitor-owned BlockDriverStates so
the generic block layer can do so.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17 15:47:56 +01:00
Max Reitz fe1a9cbc33 block: Move some bdrv_*_all() functions to BB
Move bdrv_commit_all() and bdrv_flush_all() to the BlockBackend level.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17 15:47:56 +01:00
Max Reitz 9c4218e957 blockdev: Keep track of monitor-owned BDS
As a side effect, we can now make x-blockdev-del's check whether a BDS
is actually owned by the monitor explicit.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02 17:50:46 +01:00
Alexey Kardashevskiy 0a9516c2d6 monitor/target-ppc: Define target_get_monitor_def
At the moment get_monitor_def() returns only registers from statically
defined monitor_defs array. However there is a lot of BOOK3S SPRs
which are not in the list and cannot be printed from the monitor.

This adds a new target platform hook - target_get_monitor_def().
The hook is called if a register was not found in the static
array returned by the target_monitor_defs() hook.

The hook is only defined for POWERPC, it returns registered
SPRs and fails on unregistered ones providing the user with information
on what is actually supported on the running CPU. The register value is
saved as uint64_t as it is the biggest supported register size;
target_ulong cannot be used because of the stub - it is in a "common"
code and cannot include "cpu.h", etc; this is also why the hook prototype
is redefined in the stub instead of being included from some header.

This replaces static descriptors for GPRs, FPRs, SRs with a helper which
looks for a value in a corresponding array in the CPUPPCState.
The immediate effect is that all 32 SRs can be printed now (instead of 16);
later this can be reused for VSX or TM registers.

This replaces callbacks for MSR and XER with static descriptors in
monitor_defs as they are stored in CPUPPCState.

While we are here, this adds "cr" as a synonym of "ccr".

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 14:53:36 +11:00
Pavel Dovgalyuk d73abd6dcc replay: global variables and function stubs
This patch adds global variables, defines, function declarations,
and function stubs for deterministic VM replay used by external modules.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05 12:19:08 +01:00
Peter Maydell ca3e40e233 vhost, pc, virtio features, fixes, cleanups
New features:
     VT-d support for devices behind a bridge
     vhost-user migration support
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWKMrnAAoJECgfDbjSjVRpVL0H/iRc31o00QE4nWBRpxUpf8WJ
 V5RWE8qKkDgBha5bS5Nt4vs8K4jkkHGXCbmygMidWph96hUPK8/yHy1A/wmpBibB
 5hVSPDK8onavNGJwpaWDrkhd9OhKAaKOuu49T6+VWJGZY/uX5ayqmcN934y0NPUa
 4EhH5tyxPpYOYeW9i/VOMQ374gCJcpzYBMug4NJZRyFpfz/b2mzAQtoqw3EsPtB0
 vpVJ+fKiCyG39HFKQJW7cL12yBeXOoyhjfDxpumLqwLWMfmde+vJwTFx6wbechgV
 aU3jIdvUX8wHCNYaB937NsMaDALoGNqUjbpKnf+xD1w7xr9pwTzdyrGH3rpGLEE=
 =+G1+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, pc, virtio features, fixes, cleanups

New features:
    VT-d support for devices behind a bridge
    vhost-user migration support

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (37 commits)
  hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
  i386: keep cpu_model field in MachineState uptodate
  vhost: set the correct queue index in case of migration with multiqueue
  piix: fix resource leak reported by Coverity
  seccomp: add memfd_create to whitelist
  vhost-user-test: check ownership during migration
  vhost-user-test: add live-migration test
  vhost-user-test: learn to tweak various qemu arguments
  vhost-user-test: wrap server in TestServer struct
  vhost-user-test: remove useless static check
  vhost-user-test: move wait_for_fds() out
  vhost: add migration block if memfd failed
  vhost-user: use an enum helper for features mask
  vhost user: add rarp sending after live migration for legacy guest
  vhost user: add support of live migration
  net: add trace_vhost_user_event
  vhost-user: document migration log
  vhost: use a function for each call
  vhost-user: add a migration blocker
  vhost-user: send log shm fd along with log_base
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22 12:41:44 +01:00
Igor Mammedov 2ce68e4cf5 vhost: add vhost_has_free_slot() interface
it will allow for other parts of QEMU check if it's safe
to map memory region during hotplug/runtime.
That way hotplug path will have a chance to cancel
hotplug operation instead of crashing in vhost_commit().

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-22 14:34:48 +03:00
Paolo Bonzini fa19d02539 qemu-char: convert vc backend to data-driven creation
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 10:13:07 +02:00
Paolo Bonzini 68145e178a qemu-char: convert spice backend to data-driven creation
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 10:13:07 +02:00
Paolo Bonzini 0498790173 qemu-char: convert testdev backend to data-driven creation
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 10:06:09 +02:00
Paolo Bonzini e47666b8d1 qemu-char: convert braille backend to data-driven creation
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 10:05:50 +02:00
Paolo Bonzini 96d885b93b qemu-char: convert msmouse backend to data-driven creation
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19 10:05:50 +02:00
Pavel Butsykin bf95728400 monitor: remove target-specific code from monitor.c
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery.  The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16 17:33:32 +02:00
Markus Armbruster 4629ed1e98 qerror: Finally unused, clean up
Remove it except for two things in qerror.h:

* Two #include to be cleaned up separately to avoid cluttering this
  patch.

* The QERR_ macros.  Mark as obsolete.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster f51074cdc6 pci-hotplug-old: Has been dead for five major releases, bury
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).

In all this time, nobody reported the loss.  I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.

Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.

Remove the commands along with the code backing them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01 12:37:54 +01:00
Markus Armbruster 8fb3c76c94 block: Code motion to get rid of stubs/blockdev.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:26 +02:00
Markus Armbruster 3ae59580a0 block: Keep DriveInfo alive until BlockDriverState dies
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not
the BDS.  This can happen in three places:

* Device model destruction during unplug: blockdev_auto_del()

* Xen IDE unplug: pci_piix3_xen_ide_unplug()

* drive_del command when no device model is attached: do_drive_del()

The other callers of drive_del are on error paths where refcnt == 1.

If the user somehow manages to plug in a device model using a BDS that
has gone through drive_del(), the legacy configuration passed in
DriveInfo doesn't reach the device model, and automatic deletion on
unplug doesn't work.  Worse, some device models such as scsi-disk
crash when DriveInfo doesn't exist.

This is theoretical; I didn't research an actual reproducer. The problem
was introduced when we replaced DriveInfo reference counting by BDS
reference counting in commit a94a3fa..fa510eb.

Fix by keeping DriveInfo alive until its BDS dies.

This affects qemu_drive_opts: now you can't reuse the same ID for new
drive options until the BDS dies.  Before, you could, but since the
code always attempts to create a BDS with the same ID next, the
enclosing operation "create a new drive" failed anyway.  Different
error path, same result.

Unfortunately, the fix involves use of blockdev.c stuff from block.c,
which is a layering violation.  Fortunately, my forthcoming
BlockBackend work will get rid of it again.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-25 15:24:14 +02:00
Paolo Bonzini 5692399f0a backends: Introduce chr-testdev
From: Paolo Bonzini <pbonzini@redhat.com>

chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.

Currently there is a single command implemented, "q".  It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.

It can be used as:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtserialport,chardev=ctd -chardev testdev,id=ctd

or, use:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtconsole,chardev=ctd -chardev testdev,id=ctd

to bind it to virtio-serial port0.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-06 17:53:05 +02:00
Peter Maydell 089a39486f Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp: (43 commits)
  monitor: protect event emission
  monitor: protect outbuf and mux_out with mutex
  qemu-char: make writes thread-safe
  qemu-char: move pty_chr_update_read_handler around
  qemu-char: do not call chr_write directly
  qemu-char: introduce qemu_chr_alloc
  qapi event: clean up
  qapi event: convert QUORUM events
  qapi event: convert GUEST_PANICKED
  qapi event: convert BALLOON_CHANGE
  qmp: convert ACPI_DEVICE_OST event
  qapi event: convert SPICE events
  qapi event: convert VNC events
  qapi event: convert NIC_RX_FILTER_CHANGED
  qapi event: convert other BLOCK_JOB events
  qapi event: convert BLOCK_IMAGE_CORRUPTED
  qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR
  qapi event: convert DEVICE_TRAY_MOVED
  qapi event: convert DEVICE_DELETED
  qapi event: convert WATCHDOG
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-24 13:06:13 +01:00
Wenchao Xia 751751732c qapi event: clean up
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:12:28 -04:00
Nikolay Nikolaev 1dc75c6d74 libqemustub: add more stubs for qemu-char
Additional stubs:
 - chr_baum_init
 - qemu_chr_open_spice_vmc
 - qemu_chr_open_spice_port

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23 17:37:59 +03:00
Igor Mammedov 6f2e27301d qmp: add query-memory-devices command
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:22 +03:00
Nikolay Nikolaev 07a32d6b96 libqemustub: add stubs to be able to use qemu-char.c
chardev depends on lots of external symbols that are not necessarily
needed to be able to use, for example, 'socket chardev'. So add stubs
for these functions:

 - bdrv_commit_all
 - qemu_chr_open_msmouse
 - is_daemonized
 - qemu_add_machine_init_done_notifier
 - monitor_init
 - qemu_notify_event
 - vc_init

and this array:

 - serial_hds

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:18 +03:00
Cole Robinson 4a66d3bf9a monitor: Remove unused monitor_print_filename
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:19:58 -04:00
Markus Armbruster c3adb58fe0 blockdev: Refuse to open encrypted image unless paused
Opening an encrypted image takes an additional step: setting the key.
Between open and the key set, the image must not be used.

We have some protection against accidental use in place: you can't
unpause a guest while we're missing keys.  You can, however, hot-plug
block devices lacking keys into a running guest just fine, or insert
media lacking keys.  In the latter case, notifying the guest of the
insert is delayed until the key is set, which may suffice to protect
at least some guests in common usage.

This patch makes the protection apply in more cases, in a rather
heavy-handed way: it doesn't let you open encrypted images unless
we're in a paused state.

It doesn't extend the protection to users other than the guest (block
jobs?).  Use of runstate_check() from block.c is disgusting.  Best I
can do right now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-14 16:24:42 +01:00
Peter Maydell 01c22f2cdd main-loop: Suppress "I/O thread spun" warnings for qtest
When running under qtest we don't actually have any vcpu threads
to be starved, so the warning about the I/O thread spinning isn't
relevant, and the way qtest manipulates the simulated clock means
the warning is produced a lot as a false positive. Suppress it if
qtest_enabled(), so 'make check' output is less noisy.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 21:36:50 +01:00
Christoffer Dall d6032e06d1 kvm: Introduce kvm_arch_irqchip_create
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation
for architecture-specific use of the device control API to create IRQ
chips.

Following patches will implement the ARM irqchip create method to prefer
the device control API over the older KVM_CREATE_IRQCHIP API.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26 17:20:00 +00:00
Paolo Bonzini 5accc8408f scsi: prefer UUID to VM name for the initiator name
The UUID is unique even across multiple hosts, thus it is
better than a VM name even if it is less user-friendly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Andreas Färber 5b24c64188 cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XML
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field.
Use first_cpu for qSupported and qXfer:features:read: for now.
Add a stub for xml_builtin.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27 00:04:17 +02:00
Andreas Färber 88f62c2b1d dump: Move stubs into libqemustub.a
This allows us to drop CONFIG_NO_CORE_DUMP with its indirect dependency
on CONFIG_HAVE_CORE_DUMP.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-10 23:33:18 +02:00
Igor Mammedov 2993683b0f cpu: Introduce cpu_resume(), for single CPU
Also add a stub for it, to make possible to use it in qom/cpu.c,
which is shared with user emulators.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01 13:04:17 +02:00
Paolo Bonzini 1559e0d4b5 hw: move device-hotplug.o to toplevel, compile it once
The situation with device-hotplug.c is similar to qdev-monitor.c.
Add a stub for pci_drive_hot_add, so that it can be compiled once,
and move it out of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 13:57:13 +01:00
Paolo Bonzini 5708fc6655 stubs: fully replace qemu-tool.c and qemu-user.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 17:19:08 +01:00
Eduardo Habkost 906709a151 libqemustub: sysbus_get_default() stub
The stub will be used on cases where sysbus.c is not compiled in (e.g.
*-user).

Note that code that uses NULL as the bus with qdev{_try,}_create()
implicitly uses sysbus_get_default() as the bus, and will still require
sysbus.c to be compiled in.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08 21:03:43 +01:00
Eduardo Habkost 083a5f8731 libqemustub: vmstate register/unregister stubs
Add vmstate stub functions, so that qdev.o can be used without savevm.o
when vmstate support is not necessary (i.e. by *-user).

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08 21:03:43 +01:00
Eduardo Habkost 41c6bcd912 libqemustub: Add qemu_[un]register_reset() stubs
This will be useful for code that don't call qemu_devices_reset() (e.g.
*-user). If qemu_devices_reset() is never called, it means we don't need
to keep track of the reset handler list.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08 21:03:43 +01:00
Paolo Bonzini 3bc2f570ec build: replace weak symbols with a static library
Weak symbols were a nice idea, but they turned out not to be a good one.
Toolchain support is just too sparse, in particular llvm-gcc is totally
broken.

This patch uses a surprisingly low-tech approach: a static library.
Symbols in a static library are always overridden by symbols in an
object file.  Furthermore, if you place each function in a separate
source file, object files for unused functions will not be taken in.
This means that each function can use all the dependencies that it needs
(especially QAPI stuff such as error_setg).

Thus, all stubs are placed in separate object files and put together in
a static library.  The library then is linked to all programs.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-18 19:19:23 +00:00