blk_insert_bs() requires that callers hold the AioContext lock for the
node that should be inserted. Take it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230605085711.21261-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Accessing the TIMA from some specific ring/offset combination can
trigger a special operation, with or without side effects. It is
implemented in qemu with an array of special operations to compare
accesses against. Since the presenter on P10 is pretty similar to P9,
we had the full array defined for P9 and we just had a special case
for P10 to treat one access differently. With a recent change,
6f2cbd133d ("pnv/xive2: Handle TIMA access through all ports"), we
now ignore some of the bits of the TIMA address, but that patch
managed to botch the detection of the special case for P10.
To clean that up, this patch introduces a full array of special ops to
be used for P10. The code to detect a special access is common with
P9, only the array of operations differs. The presenter can pick the
correct array of special ops based on its configuration introduced in
a previous patch.
Fixes: Coverity CID 1512997, 1512998
Fixes: 6f2cbd133d ("pnv/xive2: Handle TIMA access through all ports")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The presenters for xive on P9 and P10 are mostly similar but the
behavior can be tuned through a few CQ registers. This patch adds a
"get_config" method, which will allow to access that config from the
presenter in a later patch.
For now, just define the config for the TIMA version.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PPC TCG supports SMT CPU configurations for non-hypervisor state, so
permit POWER8-10 pseries machines to enable SMT.
This requires PIR and TIR be set, because that's how sibling thread
matching is done by TCG.
spapr's nested-HV capability does not currently coexist with SMT, so
that combination is prohibited (interestingly somewhat analogous to
LPAR-per-core mode on real hardware which also does not support KVM).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Also test smp_threads when checking for POWER8 CPU and above ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Although the PPC target only supports the TCG and KVM
accelerators, QEMU supports more. We can not assume that
'!kvm == tcg', so test for the correct accelerator. This
also eases code review, because here we don't care about
KVM, we really want to test for TCG.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[np: Fix changelog typo noticed by Zoltan]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Doorbells in SMT need to coordinate msgsnd/msgclr and DPDES access from
multiple threads that affect the same state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create spapr_nested.c for most of the nested HV implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Arguably this is just shuffling around register accesses, but one nice
thing it does is allow the exit to save away the L2 state then switch
the environment to the L1 before copying L2 data back to the L1, which
logically flows more naturally and simplifies the error paths.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rather than use a copy of CPUPPCState to store the host state while
the environment has been switched to the L2, use a new struct for
this purpose.
Have helper functions to save and load this host state.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fix missing env->ca restore when going from L2 back to the host.
Fixes: 120f738a46 ("spapr: implement nested-hv capability for the virtual hypervisor")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 'bamboo' machine was used as a KVM platform in the early days (~2008).
It clearly doesn't support it anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 'prep' machine never supported KVM. This piece of code was
probably inherited from another model.
Cc: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The phb error macros add a newline for you, so remove the second one to
avoid double whitespace.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
=8zCK
-----END PGP SIGNATURE-----
Merge tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa into staging
target/hppa: Fix boot and reboot for SMP machines
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
# X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
# NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
# =8zCK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Jun 2023 01:49:44 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update to SeaBIOS-hppa version 8
target/hppa: Provide qemu version via fw_cfg to firmware
target/hppa: Fix OS reboot issues
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give current QEMU version string to SeaBIOS-hppa via fw_cfg interface so
that the firmware can show the QEMU version in the boot menu info.
Signed-off-by: Helge Deller <deller@gmx.de>
When the OS triggers a reboot, the reset helper function sends a
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET) together with an
EXCP_HLT exception to halt the CPUs.
So, at reboot when initializing the CPUs again, make sure to set all
instruction pointers to the firmware entry point, disable any interrupts,
disable data and instruction translations, enable PSW_Q bit and tell qemu
to unhalt (halted=0) the CPUs again.
This fixes the various reboot issues which were seen when rebooting a
Linux VM, including the case where even the monarch CPU has been virtually
halted from the OS (e.g. via "chcpu -d 0" inside the Linux VM).
Signed-off-by: Helge Deller <deller@gmx.de>
Create ITS as part of SBSA platform GIC initialization.
GIC ITS information is in DeviceTree so TF-A can pass it to EDK2.
Bumping platform version to 0.2 as this is important hardware change.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230619170913.517373-2-marcin.juszkiewicz@linaro.org
Co-authored-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Analysis of the MacOS toolbox ROM code shows that on startup it attempts 2
separate reads of the seconds registers with commands 0x9d...0x91 followed by
0x8d..0x81 without resetting the command to its initial value. The PRAM seconds
value is only accepted when the values of the 2 separate reads match.
From this we conclude that bit 4 of the rtc command is not decoded or we don't
care about its value when reading the PRAM seconds registers. Implement this
decoding change so that both reads return successfully which allows the MacOS
toolbox ROM to correctly set the date/time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A comparison between the rtc command table included in the comment and the code
itself shows that the decoding for PRAM addresses 0x0 to 0xf is being done on
the raw command, and not the shifted version held in value.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-24-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the macfb device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Instead use the qdev_get_child_bus() function which is intended for this exact
purpose.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-22-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the mac-nubus-bridge device to use
object_initialize_child() and map the Nubus address space using
memory_region_add_subregion() instead of sysbus_mmio_map().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the SWIM device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the ESP device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the escc_orgate device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the ESCC device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the dp8393x device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is to enable them to be used outside of dp8393x.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the VIA2 device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the VIA1 device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current use of aliased memory regions causes us 2 problems: firstly the
output of "info qom-tree" is absolutely huge and difficult to read, and
secondly we have already reached the internal limit for memory regions as
adding any new memory region into the mac-io region causes QEMU to assert
with "phys_section_add: Assertion `map->sections_nb < TARGET_PAGE_SIZE'
failed".
Implement the mac-io region aliasing using a single IO memory region that
applies IO_SLICE_MASK representing the maximum size of the aliased region and
then forwarding the access to the existing mac-io memory region using the
address space API.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move all devices from the IO region to within the container in preparation
for updating the IO aliasing mechanism.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the GLUE device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The use of the DEFINE_TYPES() macro will soon be recommended over the use of
calling type_init() directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will allow the q800-glue.h header to be included separately so that the
GLUE device can be referenced externally.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-8-mark.cave-ayland@ilande.co.uk>
[lv: update comment]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the CPU to use object_initialize_child()
followed by a separate realisation.
Restrict valid CPU types to m68040.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-6-mark.cave-ayland@ilande.co.uk>
[lv: update commit message]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will enable us later to distinguish between QOM initialisation and machine
initialisation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This provides an overall container and owner for Machine-related objects such
as MemoryRegions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This brings GLUEState in line with our current QOM guidelines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Ensure there is a space before the final closing brace for all global
properties.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230612223456.33824-5-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 3/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE
really being SoC-specific]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux kernel added a flood check for RX data recently in commit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the UART status register 2. The wake bit
indicates that the receiver detected a start bit on the RX line. If the
kernel sees a number of RX interrupts without the wake bit being set, it
treats this as spurious data and resets the UART port. imx_serial does
never set the wake bit and triggers the kernel's flood check.
This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.
The wake bit can be configured as an interrupt source. Support this
mechanism as well.
Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230607092112.655098-1-marcin.juszkiewicz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The nrf51_timer has a free-running counter which we implement using
the pattern of using two fields (update_counter_ns, counter) to track
the last point at which we calculated the counter value, and the
counter value at that time. Then we can find the current counter
value by converting the difference in wall-clock time between then
and now to a tick count that we need to add to the counter value.
Unfortunately the nrf51_timer's implementation of this has a bug
which means it loses time every time update_counter() is called.
After updating s->counter it always sets s->update_counter_ns to
'now', even though the actual point when s->counter hit the new value
will be some point in the past (half a tick, say). In the worst case
(guest code in a tight loop reading the counter, icount mode) the
counter is continually queried less than a tick after it was last
read, so s->counter never advances but s->update_counter_ns does, and
the guest never makes forward progress.
The fix for this is to only advance update_counter_ns to the
timestamp of the last tick, not all the way to 'now'. (This is the
pattern used in hw/misc/mps2-fpgaio.c's counter.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230606134917.3782215-1-peter.maydell@linaro.org
Kevin Wolf
Frederic Barrat
Nicholas Piggin
Philippe Mathieu-Daudé
Cédric Le Goater
Joel Stanley
Richard Henderson
Helge Deller
Shashi Mallela
Mark Cave-Ayland
Sergey Kambalin
Martin Kaiser
Marcin Juszkiewicz
Peter Maydell