Commit Graph

18 Commits

Author SHA1 Message Date
Alexey Perevalov 65ace06045 migration: add postcopy total blocktime into query-migrate
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.

The query-migrate command will show following sample result:
{"return":
    "postcopy-vcpu-blocktime": [115, 100],
    "status": "completed",
    "postcopy-blocktime": 100
}}

postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.

This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-7-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-04-25 18:02:17 +01:00
Alexey Perevalov f22f928ec9 migration: introduce postcopy-blocktime capability
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-2-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-04-25 18:02:12 +01:00
Vladimir Sementsov-Ogievskiy 55efc8c2ff qapi: add dirty-bitmaps migration capability
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180313180320.339796-7-vsementsov@virtuozzo.com
2018-03-13 17:05:45 -04:00
Greg Kurz c2eb7f213a migration: improve documentation of postcopy-ram
This capability must have the same value on both source and destination,
otherwise migration fails (commit 875fcd013a "migration: incoming
postcopy advise sanity checks").

Let's write it down in various places where postcopy-ram is documented.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <151801810352.29167.4832480228518630626.stgit@bahia.lan>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-02-14 10:23:15 +00:00
Peter Maydell ee86981bda migration: Revert postcopy-blocktime commit set
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability

as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-23 10:08:05 +00:00
Alexey Perevalov ca6011c232 migration: add postcopy total blocktime into query-migrate
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.

The query-migrate command will show following sample result:
{"return":
    "postcopy-vcpu-blocktime": [115, 100],
    "status": "completed",
    "postcopy-blocktime": 100
}}

postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.

This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15 12:48:04 +01:00
Alexey Perevalov 31bf06a9d6 migration: introduce postcopy-blocktime capability
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-01-15 12:47:59 +01:00
Juan Quintela 741d4086c8 migration: Use proper types in json
We use int for everything (int64_t), and then we check that value is
between 0 and 255.  Change it to the valid types.

This change only happens for HMP.  QMP always use bytes and similar.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2018-01-15 12:47:53 +01:00
Anthony PERARD 5d6c599fe1 migration, xen: Fix block image lock issue on live migration
When doing a live migration of a Xen guest with libxl, the images for
block devices are locked by the original QEMU process, and this prevent
the QEMU at the destination to take the lock and the migration fail.

>From QEMU point of view, once the RAM of a domain is migrated, there is
two QMP commands, "stop" then "xen-save-devices-state", at which point a
new QEMU is spawned at the destination.

Release locks in "xen-save-devices-state" so the destination can takes
them, if it's a live migration.

This patch add the "live" parameter to "xen-save-devices-state" which
default to true so older version of libxenlight can work with newer
version of QEMU.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-11-21 19:42:26 +01:00
Juan Quintela 73af8dd8d7 migration: Make xbzrle_cache_size a migration parameter
Right now it is a variable in MigrationState instead of a
MigrationParameter.  The change allows to set it as the rest of the
Migration parameters, from the command line, with
query_migration_paramters, set_migrate_parameters, etc.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-29 14:06:15 +01:00
Juan Quintela 40a5532f82 qapi: Fix grammar in x-multifd-page-count descriptions
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23 18:03:42 +02:00
Dr. David Alan Gilbert 89cfc02cb6 migration: migrate-continue
A new qmp command allows the caller to continue from a given
paused state.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23 18:03:30 +02:00
Dr. David Alan Gilbert 31e060774c migration: Add 'pre-switchover' and 'device' statuses
Add two statuses for use when the 'pause-before-switchover'
capability is enabled.

'pre-switchover' is the state that we wait in for management
to allow us to continue.
'device' is the state we enter while serialising the devices
after management gives us the OK.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23 18:03:28 +02:00
Dr. David Alan Gilbert 93fbd0314e migration: Add 'pause-before-switchover' capability
When 'pause-before-switchover' is enabled, the outgoing migration
will pause before invalidating the block devices and serializing
the device state.
At this point the management layer gets the chance to clean up any
device jobs or other device users before the migration completes.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-10-23 18:03:27 +02:00
Juan Quintela 0fb86605ea migration: Create x-multifd-page-count parameter
Indicates how many pages we are going to send in each batch to a multifd
thread.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

--

Be consistent with defaults and documentation
Use new DEFINE_PROP_*
Rename x-multifd-group to x-multifd-page-count
2017-09-22 14:11:21 +02:00
Juan Quintela 4075fb1ca4 migration: Create x-multifd-channels parameter
Indicates the number of channels that we will create.  By default we
create 2 channels.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>

--

Catch inconsistent defaults (eric).
Improve comment stating that number of threads is the same than number
of sockets
Use new DEFIN_PROP_*
Rename x-multifd-threads to x-multifd-threads
2017-09-22 14:11:21 +02:00
Juan Quintela 30126bbf1f migration: Add multifd capability
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>

--

Use new DEFINE_PROP
2017-09-22 14:11:20 +02:00
Markus Armbruster 48685a8e2c qapi-schema: Collect migration stuff in qapi/migration.json
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-04 13:09:12 +02:00