Do not accept any Object for CPUArchId::cpu field,
restrict it to CPUState type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-3-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the commit 05e385d2a9 ("error: Move ERRP_GUARD() to the beginning
of the function"), there are new codes that don't put ERRP_GUARD() at
the beginning of the functions.
As stated in the commit 05e385d2a9: "include/qapi/error.h advises to put
ERRP_GUARD() right at the beginning of the function, because only then
can it guard the whole function.", so clean up the few spots
disregarding the advice.
Inspired-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312060337.3240965-1-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Switch the s390x virtual-css bus from using BusClass::reset to the
Resettable interface.
This has no behavioural change, because the BusClass code to support
subclasses that use the legacy BusClass::reset will call that method
in the hold phase of 3-phase reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240119163512.3810301-5-peter.maydell@linaro.org
cpu_class_init() is specific to s390x SCLP, so rename
it as sclp_cpu_class_init() (as other names in this file)
to ease navigating the code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-ID: <20240111120221.35072-4-philmd@linaro.org>
ISM devices are sensitive to manipulation of the IOMMU, so the ISM device
needs to be reset before the vfio-pci device is reset (triggering a full
UNMAP). In order to ensure this occurs, trigger ISM device resets from
subsystem_reset before triggering the PCI bus reset (which will also
trigger vfio-pci reset). This only needs to be done for ISM devices
which were enabled for use by the guest.
Further, ensure that AIF is disabled as part of the reset event.
Fixes: ef1535901a ("s390x: do a subsystem reset before the unprotect on reboot")
Fixes: 03451953c7 ("s390x/pci: reset ISM passthrough devices on shutdown and system reset")
Reported-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Typically we refresh the host fh during CLP enable, however it's possible
that the device goes through multiple reset events before the guest
performs another CLP enable. Let's handle this for now by refreshing the
host handle from vfio before disabling aif.
Fixes: 03451953c7 ("s390x/pci: reset ISM passthrough devices on shutdown and system reset")
Reported-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-3-mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use a flag to keep track of whether AIF is currently enabled. This can be
used to avoid enabling/disabling AIF multiple times as well as to determine
whether or not it should be disabled during reset processing.
Fixes: d0bc7091c2 ("s390x/pci: enable adapter event notification for interpreted devices")
Reported-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-2-mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As commit 3e015d815b ("use g_path_get_basename instead of basename")
said, g_path_get_dirname() should be preferred over dirname() since
the former is a portable utility function that has the advantage of not
modifying the string argument.
Replace dirname() with g_path_get_dirname().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20231221171921.57784-3-zhao1.liu@linux.intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_path_get_basename() is a portable utility function that has the
advantage of not modifying the string argument, so it should be
preferred over basename().
And also to avoid potential compile breakage with the Musl C library
similar to [1], replace basename() with g_path_get_basename().
[1]: https://lore.kernel.org/all/20231212010228.2701544-1-raj.khem@gmail.com/
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20231221171921.57784-2-zhao1.liu@linux.intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's a common scenario to copy guest images from one host to another
to run the guest on the other machine. This (of course) does not work
with "secure execution" guests since they are encrypted with one certain
host key. However, if you still (accidentally) do it, you only get a
very user-unfriendly error message that looks like this:
qemu-system-s390x: KVM PV command 2 (KVM_PV_SET_SEC_PARMS) failed:
header rc 108 rrc 5 IOCTL rc: -22
Let's provide at least a somewhat nicer hint to the users so that they
are able to figure out what might have gone wrong.
Buglink: https://issues.redhat.com/browse/RHEL-18212
Message-ID: <20240110142916.850605-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
-----BEGIN PGP SIGNATURE-----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=TA1/
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu into staging
* Add compat machines for QEMU 9.0
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWCtYsRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWLnw//cNJrxG0V+j0iakX+C7HRumVrLBDI4KYY
# Cp2Hx92SyeQ0Kk8DJS6JueTV0SLjMsV77APu2YPH7ELmPlk+CB9gqmV7xVoYNvsm
# QbRPlIjFw8MHLekadc2A+C+pn48tWACoOdBEDIfazKrxybnf0B57RC/fIfMKHjbs
# 2ALCoFbbgphs7yWuzTHK8ayKaGMhUVkWfzHQwpnq899olHyZBhkl951uKJA6VmLx
# KvggePkpszLjmmXA8MH1hDCcizki31cB0ZKTbQFCyE42s2S3Hvg0GueU90O7Y1cj
# lS5tPVQxyEhUYMLL+/hudlf2OYqVn2BalB7ieUQIy6rG8yoc9zxfIKQi0ccl+2oA
# s8HRq5S0bSjtilQogU1LQL/Gk6W1/N9MmnhKvCGB+BTK5KX7s4EQk02y9gGZm/8s
# pMErMyaXTG4dLiTAK42VgMVDqCYvzBmE+Gj91OmoUR7fb+VMrsWxeBFxMPDn+VtL
# TMJegIFsjw2QCSitcU4v+nP0qtKgXGbuZtrGXKabrxH5PmeQFJDSM7TwpTK4qvjK
# QMIQKBbz8BfJnUzN8qAaaJEpp1T5tcMJClKtfcgxq/+VyaSaHLmD0cljqBC+g+y7
# FTo+fa7oYx44sAlqapdEXBSGn4T+J26iuCef13CCCiPfYBv/tk3b2E0AWHj4y58I
# +VpInjUaPBQ=
# =TA1/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Dec 2023 04:36:11 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu:
tests/unit/test-qmp-event: Replace fixture by global variables
tests/unit/test-qmp-event: Simplify event emission check
tests/unit/test-qmp-event: Drop superfluous mutex
tests/qtest/npcm7xx_pwm-test: Only do full testing in slow mode
qemu-options: Clarify handling of commas in options parameters
tests/qtest/migration-test: Fix analyze-migration.py for s390x
qom/object: Limit type names to alphanumerical and some few special characters
tests/unit/test-io-task: Rename "qemu:dummy" to avoid colon in the name
memory: Remove "qemu:" prefix from the "qemu:ram-discard-manager" type name
hw: Replace anti-social QOM type names (again)
docs/system/arm: Fix for rename of type "xlnx.bbram-ctrl"
target: Restrict 'sysemu/reset.h' to system emulation
hw/s390x/ipl: Remove unused 'exec/exec-all.h' included header
hw/misc/mips_itu: Remove unnecessary 'exec/exec-all.h' header
hw/ppc/spapr_hcall: Remove unused 'exec/exec-all.h' included header
system/qtest: Restrict QTest API to system emulation
system/qtest: Include missing 'hw/core/cpu.h' header
MAINTAINERS: Add some more vmware-related files to the corresponding section
hw: Add compat machines for 9.0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231212113640.30287-4-philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the host kernel lacks vfio DMA limit reporting, do not attempt
to shrink the guest DMA aperture.
Fixes: df202e3ff3 ("s390x/pci: shrink DMA aperture to be bound by vfio DMA limit")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20231110175108.465851-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current code assumes that there is always a vfio group, but
that's no longer guaranteed with the iommufd backend when using
cdev. In this case, we don't need to track the vfio dma limit
anyway.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20231110175108.465851-2-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"hw/s390x/sclp.h" is a header used by target-agnostic objects
(such hw/char/sclpconsole[-lm].c), thus can not use target-specific
types, such CPUS390XState.
Have sclp_service_call[_protected]() take a S390CPU pointer, which
is target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231106114500.5269-3-philmd@linaro.org>
"hw/s390x/css.h" is a header used by target-agnostic objects
(such hw/s390x/virtio-ccw-gpu.c), thus can not use target-specific
types, such CPUS390XState.
Have css_do_sic() take S390CPU a pointer, which is target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231106114500.5269-2-philmd@linaro.org>
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
- included hw/remote/iommu.c
- documentation update
- asserts in pci_setup_iommu()
- removed checks on iommu_bus->iommu_ops->get_address_space
- included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We must not call register_savevm_live() from an instance_init() function
(since this could be called multiple times during device introspection).
Move this to the realize() function instead.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-4-thuth@redhat.com>
There's no need for dedicated handlers here if they don't do anything
special.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-3-thuth@redhat.com>
Since the instance_init() function immediately tries to set the
property to "true", the s390_skeys_set_migration_enabled() tries
to register a savevm handler during instance_init(). However,
instance_init() functions can be called multiple times, e.g. for
introspection of devices. That means multiple instances of devices
can be created during runtime (which is fine as long as they all
don't get realized, too), so the "Prevent double registration of
savevm handler" check in the s390_skeys_set_migration_enabled()
function does not work at all as expected (since there could be
more than one instance).
Thus we must not call register_savevm_live() from an instance_init()
function at all. Move this to the realize() function instead. This
way we can also get rid of the property getter and setter functions
completely, simplifying the code along the way quite a bit.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-2-thuth@redhat.com>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
The query-s390x-cpu-polarization qmp command returns the current
CPU polarization of the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-14-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the guest asks to change the polarization this change
is forwarded to the upper layer using QAPI.
The upper layer is supposed to take according decisions concerning
CPU provisioning.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-13-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The modification of the CPU attributes are done through a monitor
command.
It allows to move the core inside the topology tree to optimize
the cache usage in the case the host's hypervisor previously
moved the CPU.
The same command allows to modify the CPU attributes modifiers
like polarization entitlement and the dedicated attribute to notify
the guest if the host admin modified scheduling or dedication of a vCPU.
With this knowledge the guest has the possibility to optimize the
usage of the vCPUs.
The command has a feature unstable for the moment.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231016183925.2384704-10-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The KVM capability KVM_CAP_S390_CPU_TOPOLOGY is used to
activate the S390_FEAT_CONFIGURATION_TOPOLOGY feature and
the topology facility in the host CPU model for the guest
in the case the topology is available in QEMU and in KVM.
The feature is disabled by default and fenced for SE
(secure execution).
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-9-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the host supports the CPU topology facility, the PTF
instruction with function code 2 is interpreted by the SIE,
provided that the userland hypervisor activates the interpretation
by using the KVM_CAP_S390_CPU_TOPOLOGY KVM extension.
The PTF instructions with function code 0 and 1 are intercepted
and must be emulated by the userland hypervisor.
During RESET all CPU of the configuration are placed in
horizontal polarity.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-8-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
During a subsystem reset the Topology-Change-Report is cleared
by the machine.
Let's ask KVM to clear the Modified Topology Change Report (MTCR)
bit of the SCA in the case of a subsystem reset.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-7-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The maximum nested topology entries is used by the guest to
know how many nested topology are available on the machine.
Let change the MNEST value from 2 to 4 in the SCLP READ INFO
structure now that we support books and drawers.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-6-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On interception of STSI(15.1.x) the System Information Block
(SYSIB) is built from the list of pre-ordered topology entries.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-5-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The topology information are attributes of the CPU and are
specified during the CPU device creation.
On hot plug we:
- calculate the default values for the topology for drawers,
books and sockets in the case they are not specified.
- verify the CPU attributes
- check that we have still room on the desired socket
The possibility to insert a CPU in a mask is dependent on the
number of cores allowed in a socket, a book or a drawer, the
checking is done during the hot plug of the CPU to have an
immediate answer.
If the complete topology is not specified, the core is added
in the physical topology based on its core ID and it gets
defaults values for the modifier attributes.
This way, starting QEMU without specifying the topology can
still get some advantage of the CPU topology.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-4-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
S390 adds two new SMP levels, drawers and books to the CPU
topology.
S390 CPUs have specific topology features like dedication and
entitlement. These indicate to the guest information on host
vCPU scheduling and help the guest make better scheduling decisions.
Add the new levels to the relevant QAPI structs.
Add all the supported topology levels, dedication and entitlement
as properties to S390 CPUs.
Create machine-common.json so we can later include it in
machine-target.json also.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-3-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qbus_new() should not be called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231019071611.98885-10-philmd@linaro.org>
Fix:
hw/s390x/sclpquiesce.c:90:22: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
QuiesceNotifier *qn = container_of(n, QuiesceNotifier, notifier);
^
hw/s390x/sclpquiesce.c:86:3: note: previous declaration is here
} qn;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20231010115048.11856-7-philmd@linaro.org>
Bound APQNs have to be reset before tearing down the secure config via
s390_machine_unprotect(). Otherwise the Ultravisor will return a error
code.
So let's do a subsystem_reset() which includes a AP reset before the
unprotect call. We'll do a full device_reset() afterwards which will
reset some devices twice. That's ok since we can't move the
device_reset() before the unprotect as it includes a CPU clear reset
which the Ultravisor does not expect at that point in time.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20230901114851.154357-1-frankja@linux.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A subsystem reset contains a reset of AP resources which has been
missing. Adding the AP bridge to the list of device types that need
reset fixes this issue.
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a51b3153 ("s390x/ap: base Adjunct Processor (AP) object model")
Message-ID: <20230823142219.1046522-2-seiden@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The check for nd->model being NULL was originally required, but in
commit e11f463295 ("s390x/virtio: use qemu_check_nic_model()")
the corresponding code had been replaced by a call to the function
qemu_check_nic_model() - and this in turn calls qemu_find_nic_model()
which contains the same check for nd->model being NULL again. So we
can remove this from the calling site now.
Message-Id: <20230804073525.11857-1-thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Output message are slightly modified to ease selection with wildcards
and to report extra parameters.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230804080415.56852-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU is built with --without-default-devices, the s390-flic-kvm
device is missing and QEMU aborts when started with the KVM accelerator.
Make sure it's available by selecting S390_FLIC_KVM in Kconfig.
Consequently, this also fixes an abort in tests/qtest/migration-test.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230711151440.716822-1-clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big endian) architecture. Introduce a new config PCIE_DEVICES to select
models, Intel Ethernet adapters and one USB controller. These devices all
support MSI-X which is a requirement on s390x as legacy INTx are not
supported.
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230712080146.839113-1-clg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
