Commit Graph

57 Commits

Author SHA1 Message Date
Stefan Hajnoczi 550830f935 block: delete cow block driver
This patch removes support for the cow file format.

Normally we do not break backwards compatibility but in this case there
is no impact and it is the most logical option.  Extraordinary claims
require extraordinary evidence so I will show why removing the cow block
driver is the right thing to do.

The cow file format is the disk image format for Usermode Linux, a way
of running a Linux system in userspace.  The performance of UML was
never great and it was hacky, but it enjoyed some popularity before
hardware virtualization support became mainstream.

QEMU's block/cow.c is supposed to read this image file format.
Unfortunately the file format was underspecified:

1. Earlier Linux versions used the MAXPATHLEN constant for the backing
   filename field.  The value of MAXPATHLEN can change, so Linux
   switched to a 4096 literal but QEMU has a 1024 literal.

2. Padding was not used on the header struct (both in the Linux kernel
   and in QEMU) so the struct layout varied across architectures.  In
   particular, i386 and x86_64 were different due to int64_t alignment
   differences.  Linux now uses __attribute__((packed)), QEMU does not.

Therefore:

1. QEMU cow images do not conform to the Linux cow image file format.

2. cow images cannot be shared between different host architectures.

This means QEMU cow images are useless and QEMU has not had bug reports
from users actually hitting these issues.

Let's get rid of this thing, it serves no purpose and no one will be
affected.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:45 +01:00
Hu Tao 0e4271b711 qcow2: Add falloc and full preallocation option
preallocation=falloc allocates disk space by posix_fallocate(),
preallocation=full allocates disk space by writing zeros to disk.
Both modes imply preallocation=metadata.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-12 15:43:06 +02:00
Hu Tao 06247428be raw-posix: Add falloc and full preallocation option
This patch adds a new option preallocation for raw format, and implements
falloc and full preallocation.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-12 15:43:06 +02:00
Stefan Hajnoczi 3ba6796d08 qemu-img: fix rebase src_cache option documentation
The src_cache option (-T) specifies the cache mode for backing files.
It applies both the image's old backing file as well as the new backing
file:

  ret = bdrv_open(&bs_old_backing, backing_name, NULL, NULL, src_flags,
                  old_backing_drv, &local_err);
  if (ret) {
      ...
  }
  if (out_baseimg[0]) {
      bs_new_backing = bdrv_new("new_backing", &error_abort);
      ret = bdrv_open(&bs_new_backing, out_baseimg, NULL, NULL, src_flags,
                      new_backing_drv, &local_err);
      if (ret) {
          ...
      }
  }

The documentation only mentions the new backing file but it really
applies to both.

Suggested-by: Jeff Nelson <jenelson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-09-08 11:12:43 +01:00
Stefan Hajnoczi bb87fdf871 qemu-img: clarify src_cache option documentation
The source cache option takes the same values as the cache option.  The
documentation reads a little strange because it starts with "In contrast
the src_cache option ...".  The fact that this is comparing with the
previous documented option (the 'cache' option) is implicit.  Readers
may be confused, especially if they jump to src_cache without reading
cache documentation first.

Suggested-by: Jeff Nelson <jenelson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-09-08 11:12:43 +01:00
Max Reitz bd39e6ed0b qemu-img: Allow cache mode specification for amend
qemu-img amend may extensively modify the target image, depending on the
options to be amended (e.g. conversion to qcow2 compat level 0.10 from
1.1 for an image with many unallocated zero clusters). Therefore it
makes sense to allow the user to specify the cache mode to be used.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 14:54:48 +02:00
Max Reitz 40055951a7 qemu-img: Allow source cache mode specification
Many qemu-img subcommands only read the source file(s) once. For these
use cases, a full write-back cache is unnecessary and mainly clutters
host cache memory. Though this is generally no concern as cache memory
is freely available and can be scaled by the host OS, it may become a
concern with thin provisioning.

For these cases, it makes sense to allow users to freely specify the
source cache mode (e.g. use no cache at all).

This commit adds a new switch (-T) for the qemu-img subcommands check,
compare, convert and rebase to specify the cache to be used for source
images (the backing file in case of rebase).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 14:54:44 +02:00
Chunyan Liu bc3a7f90ff Fix nocow typos in manpage
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07 09:15:29 +02:00
Chunyan Liu 4ab1559085 qemu-img create: add 'nocow' option
Add 'nocow' option so that users could have a chance to set NOCOW flag to
newly created files. It's useful on btrfs file system to enhance performance.

Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this bad
performance is to turn off COW attributes on VM files. Generally, there are
two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then
all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.

This patch tries the second way, according to the option, it could add NOCOW
per file.

For most block drivers, since the create file step is in raw-posix.c, so we
can do setting NOCOW flag ioctl in raw-posix.c only.

But there are some exceptions, like block/vpc.c and block/vdi.c, they are
creating file by calling qemu_open directly. For them, do the same setting
NOCOW flag ioctl work in them separately.

[Fixed up 082.out due to the new 'nocow' creation option
--Stefan]

Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01 10:15:12 +02:00
Max Reitz d6635c4dbb qemu-img: Document check exit codes
The exit code 63 (check not supported by image format) was not even
documented in the comment above the check command in the source code;
add it, as it does indeed seem useful.

Also, document all of check's exit codes in the manpage.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04 11:30:32 +02:00
Daniel P. Berrange 136cd19d05 Describe flaws in qcow/qcow2 encryption in the docs
The qemu-img.texi / qemu-doc.texi files currently describe the
qcow2/qcow2 encryption thus

  "Encryption uses the AES format which is very secure (128 bit
   keys). Use a long password (16 characters) to get maximum
   protection."

While AES is indeed a strong encryption system, the way that
QCow/QCow2 use it results in a poor/weak encryption system.
Due to the use of predictable IVs, based on the sector number
extended to 128 bits, it is vulnerable to chosen plaintext
attacks which can reveal the existence of encrypted data.

The direct use of the user passphrase as the encryption key
also leads to an inability to change the passphrase of an
image. If passphrase is ever compromised the image data will
all be vulnerable, since it cannot be re-encrypted. The admin
has to clone the image files with a new passphrase and then
use a program like shred to secure erase all the old files.

Recommend against any use of QCow/QCow2 encryption, directing
users to dm-crypt / LUKS which can meet modern cryptography
best practices.

[Changed "Qcow" to "qcow" for consistency.
--Stefan]

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-31 22:05:03 +01:00
Jeff Cody 3722290074 block: update block commit documentation regarding image truncation
This updates the documentation for commiting snapshot images.
Specifically, this highlights what happens when the base image
is either smaller or larger than the snapshot image being committed.

In the case of the base image being smaller, it is resized to the
larger size of the snapshot image.  In the case of the base image
being larger, it is not resized automatically, but once the commit
has completed it is safe for the user to truncate the base image.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:12:49 +01:00
Kevin Wolf 0e3bd9932f Documentation: qemu-img: Mention SIGUSR1 progress report
Document the SIGUSR1 behaviour of qemu-img. Also, added compare to the
list of subcommands that support -p.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 14:33:00 +01:00
Stefan Hajnoczi 7fa9e1f941 docs: qcow2 compat=1.1 is now the default
Commit 9117b47717 ("qcow2: Change default
for new images to compat=1.1") changed the default qcow2 image format
version but forgot to update qemu-doc.texi and qemu-img.texi.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:16 +01:00
Jeff Cody 8282db1b2e docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
The man page for qemu-img, and the qemu-doc, did not mention VHDX
as a supported format.  This adds in reference to VHDX in those
documents.

[Stefan Weil <sw@weilnetz.de> suggested s/Block Size/Block size/ for
consistency.  I have made this change.
--Stefan]

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20 09:11:58 +01:00
Wenchao Xia ef80654d0d qemu-img: add -l for snapshot in convert
Now qemu-img convert have similar options as qemu-nbd for internal
snapshot.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-04 15:19:00 +01:00
Peter Lieven 11b6699af5 qemu-img: add support for fully allocated images
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-28 10:30:52 +01:00
Max Reitz 6f176b48f9 block: Image file option amendment
This patch adds the "amend" option to qemu-img which allows changing
image options on existing image files. It also adds the generic bdrv
implementation which is basically just a wrapper for the image format
specific function.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:46 +02:00
Paolo Bonzini facd6e2b5c docs, qapi: document qemu-img map
Eric Blake also requested including the output in qapi-schema.json,
so that it is published through the introspection mechanism.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Alexandre Derumier b2e10493c7 add qemu-img convert -n option (skip target volume creation)
Add a -n option to skip volume creation on qemu-img convert.
This is useful for targets such as rbd / ceph, where the
target volume may already exist; we cannot always rely on
qemu-img convert to create the image, as dependent on the
output format, there may be parameters which are not possible
to specify through the qemu-img convert command line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:07 +02:00
Miroslav Rezanina d14ed18c8d qemu-img: Add compare subcommand
This patch adds new qemu-img subcommand that compares content of two disk
images.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22 21:21:10 +01:00
Miroslav Rezanina f382d43a91 qemu-img: Add "Quiet mode" option
There can be a need to turn output to stdout off. This patch adds a -q option
that enable "Quiet mode". In Quiet mode, only errors are printed out.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22 21:21:09 +01:00
Federico Simoncelli 8599ea4c42 qemu-img: add json output option to the check command
This option --output=[human|json] makes qemu-img check output a human
or JSON representation at the choice of the user.

Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22 21:21:08 +01:00
Kevin Wolf d3067b020b Documentation: Update image format information
Document new and yet undocumented options and image formats. The
qemu-img man page contains information only for raw and qcow2 now and
references the HTML documentation for a more detailed description of
other formats.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-30 11:33:24 +01:00
Kashyap Chamarthy e53575606a qemu-img: document 'info --backing-chain'
Signed-off-by: Kashyap Chamarthy <kashyap.cv@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Alex Bligh a616673dd1 qemu-img rebase: use empty string to rebase without backing file
This patch allows an empty filename to be passed as the new base image name
for qemu-img rebase to mean base the image on no backing file (i.e.
independent of any backing file). According to Eric Blake, qemu-img rebase
already supports this when '-u' is used; this adds support when -u is not
used.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:18 +02:00
Anthony Liguori 109820df4a Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony:
  block: Don't forget to delete temporary file
  Don't require encryption password for 'qemu-img info' command
  qemu-img: Add json output option to the info command.
  qapi: Add SnapshotInfo and ImageInfo.
  ahci: properly reset PxCMD on HBA reset
  block: fix block tray status
  vdi: Fix warning from clang
  block/curl: Fix wrong free statement
  ide: Fix error messages from static code analysis (no real error)
  ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
  sheepdog: fix savevm and loadvm
2012-09-17 10:23:15 -05:00
Stefan Weil 0546b8c2f0 Spelling fixes in comments and documentation
These wrong spellings were detected by codespell:

* successully -> successfully

* alot -> a lot

* wanna -> want to

* infomation -> information

* occured -> occurred

["also is" -> "is also" and "ressources" -> "resources" suggested by
Peter Maydell <peter.maydell@linaro.org>]

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14 08:21:28 +01:00
Benoît Canet c054b3fd78 qemu-img: Add json output option to the info command.
This option --output=[human|json] make qemu-img info output on
human or JSON representation at the choice of the user.

example:
{
    "snapshots": [
        {
            "vm-clock-nsec": 637102488,
            "name": "vm-20120821145509",
            "date-sec": 1345553709,
            "date-nsec": 220289000,
            "vm-clock-sec": 20,
            "id": "1",
            "vm-state-size": 96522745
        },
        {
            "vm-clock-nsec": 28210866,
            "name": "vm-20120821154059",
            "date-sec": 1345556459,
            "date-nsec": 171392000,
            "vm-clock-sec": 46,
            "id": "2",
            "vm-state-size": 101208714
        }
    ],
    "virtual-size": 1073741824,
    "filename": "snap.qcow2",
    "cluster-size": 65536,
    "format": "qcow2",
    "actual-size": 985587712,
    "dirty-flag": false
}

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-12 15:50:09 +02:00
Kevin Wolf 48467328c6 Documentation: Warn against qemu-img on active image
People have repeatedly expected that you can do things like snapshotting
an image with qemu-img while a qemu instance is running. Maybe we need
to consider locking the files while they are in use, but having a
warning in the qemu-img manpage is doable for 1.2 and can't hurt anyway.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-17 21:29:15 +02:00
Stefan Hajnoczi f085800e24 qemu-img: document qed format on qemu-img man page
The qemu-img.1 man page is missing the qed format from its list of
supported formats.  Document the image creation options for qed.

Suggested-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:43 +02:00
Kevin Wolf 4534ff5426 qemu-img check -r for repairing images
The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().

This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:42 +02:00
Richard W.M. Jones 9fda6ab1d9 qemu-img: Explain how rebase operation can be used to perform a 'diff' operation.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25 18:12:54 +02:00
Kevin Wolf 3763f26f2f Documentation: Add qemu-img -t parameter in man page
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-15 12:40:08 +01:00
Kevin Wolf a22f123ca3 qemu-img: Require larger zero areas for sparse handling
By default, require 4k of consecutive zero bytes for qemu-img to make the
output file sparse by not issuing a write request for the zeroed parts. Add an
-S option to allow users to tune this setting.

This helps to avoid situations where a lot of zero sectors and data sectors are
mixed and qemu-img tended to issue many tiny 512 byte writes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-29 14:42:39 +02:00
Jes Sorensen aaf55b4795 Add missing documentation for qemu-img -p
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-20 11:13:52 +02:00
Kevin Wolf 02854532c2 Documentation: Remove outdated host_device note
People shouldn't explicitly specify host_device any more. raw is doing the
Right Thing.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-05 11:23:29 +02:00
Kevin Wolf e61846908e Documentation: Add qemu-img check/rebase
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24 16:41:49 +01:00
edison 51ef67270b Copy snapshots out of QCOW2 disk
In order to backup snapshots, created from QCOW2 iamge, we want to copy snapshots out of QCOW2 disk to a seperate storage.
The following patch adds a new option in "qemu-img": qemu-img convert -f qcow2 -O qcow2 -s snapshot_name src_img bck_img.
Right now, it only supports to copy the full snapshot, delta snapshot is on the way.

Changes from V1: all the comments from Kevin are addressed:
Add read-only checking
Fix coding style
Change the name from bdrv_snapshot_load to bdrv_snapshot_load_tmp

Signed-off-by: Disheng Su <edison@cloud.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22 14:49:35 +02:00
Stefan Hajnoczi ae6b0ed6d4 qemu-img: Add 'resize' command to grow/shrink disk images
This patch adds a 'resize' command to grow/shrink disk images.  This
allows changing the size of disk images without copying to a new image
file.  Currently only raw files support resize.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-03 10:07:32 +02:00
Kevin Wolf 3e03236438 Documentation: Add options to image format descriptions
Explain the existing format specific options that can be used with qemu-img
create/convert -o ...

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:12 -06:00
Kevin Wolf 8063d0fe3b Documentation: Don't mention old qemu-img options
The old options are still supported for compatibility, but they are
inconsistent (for example create -b vs. convert -B for backing files) and
incomplete (-F only exists for create) which tends to confuse people. Remove
all references to the old options from the documentation to guide users to the
more consistent -o options.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:12 -06:00
Kevin Wolf f932c04039 Documentation: Move image format descriptions to own section
The description of the image formats is too long to be a subitem of a parameter
description. It will become even longer when we include the options provided by
the respective format.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09 08:43:12 -06:00
Adrian Bridgett a6af8e5f96 add host_device format description to qemu-img manpage
Converting files using "qemu-img convert" onto logical volumes (or any
block device) you need to use the currently undocumented "host_device"
format.  This patch adds the required documentation to the manpage.

Reported-by: Adrian Bridgett <adrian@bitcube.co.uk>
Signed-off-by: Adrian Bridgett <adrian@bitcube.co.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06 14:36:09 -05:00
Stefan Weil 9aebd98aab Add new block driver for the VDI format (only aio supported)
This is a new block driver written from scratch
to support the VDI format in QEMU.

VDI is the native format used by Innotek / SUN VirtualBox.

Latest changes:

* stripped down version
  (code for synchronous operations and experimental code removed)

* don't open VDI snapshot images (with uuid_link or uuid_parent)

* modified vdi_aio_cancel

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
2009-08-10 13:05:30 -05:00
Stuart Brady 153859be1a Use hxtool for qemu-img command list
Use hxtool to generate the 'command syntax' section of qemu-img's help
message, and the corresponding section of the texinfo documentation.

This has the side-effect of adding 'check' to this list of commands in
the texinfo documentation.

Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
2009-06-07 09:59:47 +03:00
Kevin Wolf eff442662d Document changes in qemu-img interface
Update the documentation to reflect the introduction of format specific options
with -o. Don't advertise -e or -6 any more, they exist only for compatibility
reasons and can be replaced by the corresponding -o options.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2009-06-06 18:39:02 +03:00
aliguori 9230eaf679 qemu-img: adding a "-F base_fmt" option to "qemu-img create -b" (Uri Lublin)
If the user specifies the backing file format,
then when opening the backing file, there is no need
to probe the (backing file) image to figure out its format.

This follows my previous patches implementing bdrv_create2
which keeps (for qcow2 only) the backing file format
as a qcow2-extension

Suggested by Daniel P. Berrange.

Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6910 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28 17:55:19 +00:00
blueswir1 d2c639d6dc Synch code, help and docs
Rearrange code, help printout and docs so that they are in the same
(hopefully more logical) order for easier maintenance.

Add help and docs for undocumented options.

Reformat slightly for more consistent help output.

Add comments to encourage better synchronization in the future.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6432 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-24 18:19:25 +00:00
ths f58c7b3545 New qemu-img convert -B option, by Marc Bevand.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4672 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-05 21:53:49 +00:00