Every export type will need a BlockBackend, so creating it centrally in
blk_exp_add() instead of the .create driver callback avoids duplication.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-24-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every block export has a BlockBackend representing the disk that is
exported. It should live in BlockExport therefore.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-23-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clients may want to know when an export has finally disappeard
(block-export-del returns earlier than that in the general case), so add
a QAPI event for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-22-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implement a new QMP command block-export-del and make nbd-server-remove
a wrapper around it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The reference owned by the user/monitor that is created when adding the
export and dropped when removing it was tied to the 'exports' list in
nbd/server.c. Every block export will have a user reference, so move it
to the block export level and tie it to the 'block_exports' list in
block/export/export.c instead. This is necessary for introducing a QMP
command for removing exports.
Note that exports are present in block_exports even after the user has
requested shutdown. This is different from NBD's exports where exports
are immediately removed on a shutdown request, even if they are still in
the process of shutting down. In order to avoid that the user still
interacts with an export that is shutting down (and possibly removes it
a second time), we need to remember if the user actually still owns it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-20-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll need an id to identify block exports in monitor commands. This
adds one.
Note that this is different from the 'name' option in the NBD server,
which is the externally visible export name. While block export ids need
to be unique in the whole process, export names must be unique only for
the same server. Different export types or (potentially in the future)
multiple NBD servers can have the same export name externally, but still
need different block export ids internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a function to shut down all block exports, and another one to
shut down the block exports of a single type. The latter is used for now
when stopping the NBD server. As soon as we implement support for
multiple NBD servers, we'll need a per-server list of exports and it
will be replaced by a function using that.
As a side effect, the BlockExport layer has a list tracking all existing
exports now. closed_exports loses its only user and can go away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-18-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of letting the driver allocate and return the BlockExport
object, allocate it already in blk_exp_add() and pass it. This allows us
to initialise the generic part before calling into the driver so that
the driver can just use these values instead of having to parse the
options a second time.
For symmetry, move freeing the BlockExport to blk_exp_unref().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-17-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Every block export needs a block node to export, so add a 'node-name'
option to BlockExportOptions and remove the replaced option 'device'
from BlockExportOptionsNbd.
To maintain compatibility in nbd-server-add, BlockExportOptionsNbd needs
to be wrapped by a new type NbdServerAddOptions that adds 'device' back
because nbd-server-add doesn't use the BlockExportOptions base type at
all (so even without changing it to a 'node-name' option in
block-export-add, this compatibility code would be necessary).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-16-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-15-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Having a refcount makes sense for all types of block exports. It is also
a prerequisite for keeping a list of all exports at the BlockExport
level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-14-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Closing export is somewhat convoluted because nbd_export_close() and
nbd_export_put() call each other and the ways they actually end up being
nested is not necessarily obvious.
However, it is not really necessary to call nbd_export_close() from
nbd_export_put() when putting the last reference because it only does
three things:
1. Close all clients. We're going to refcount 0 and all clients hold a
reference, so we know there is no active client any more.
2. Close the user reference (represented by exp->name being non-NULL).
The same argument applies: If the export were still named, we would
still have a reference.
3. Freeing exp->description. This is really cleanup work to be done when
the export is finally freed. There is no reason to already clear it
while clients are still in the process of shutting down.
So after moving the cleanup of exp->description, the code can be
simplified so that only nbd_export_close() calls nbd_export_put(), but
never the other way around.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-13-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With this change, NBD exports are now only created through the
BlockExport interface. This allows us finally to move things from the
NBD layer to the BlockExport layer if they make sense for other export
types, too.
blk_exp_add() returns only a weak reference, so the explicit
nbd_export_put() goes away.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-12-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The export close callback is unused by the built-in NBD server. qemu-nbd
uses it only during shutdown to wait for the unrefed export to actually
go away. It can just use nbd_export_close_all() instead and do without
the callback.
This removes the close callback from nbd_export_new() and makes both
callers of it more similar.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-11-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-nbd allows use of writethrough cache modes, which mean that write
requests made through NBD will cause a flush before they complete.
Expose the same functionality in block-export-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-10-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a QMP equivalent of qemu-nbd's --shared option, limiting the
maximum number of clients that can attach at the same time.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-9-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd-server-add tries to be convenient and adds two questionable
features that we don't want to share in block-export-add, even for NBD
exports:
1. When requesting a writable export of a read-only device, the export
is silently downgraded to read-only. This should be an error in the
context of block-export-add.
2. When using a BlockBackend name, unplugging the device from the guest
will automatically stop the NBD server, too. This may sometimes be
what you want, but it could also be very surprising. Let's keep
things explicit with block-export-add. If the user wants to stop the
export, they should tell us so.
Move these things into the nbd-server-add QMP command handler so that
they apply only there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of implementing qemu-nbd --offset in the NBD code, just put a
raw block node with the requested offset on top of the user image and
rely on that doing the job.
This does not only simplify the nbd_export_new() interface and bring it
closer to the set of options that the nbd-server-add QMP command offers,
but in fact it also eliminates a potential source for bugs in the NBD
code which previously had to add the offset manually in all relevant
places.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-7-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No reason to duplicate the functionality locally, we can now just reuse
the QMP command block-export-add for --export.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-6-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to have a common set of commands for all types of block exports.
Currently, this is only NBD, but we're going to add more types.
This patch adds the basic BlockExport and BlockExportDriver structs and
a QMP command block-export-add that creates a new export based on the
given BlockExportOptions.
qmp_nbd_server_add() becomes a wrapper around qmp_block_export_add().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-5-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The name BlockExport will be used for the struct containing the runtime
state of block exports, so change the name of export creation options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-4-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move all block export related types and commands from block-core to the
new QAPI module block-export.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-3-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924152717.287415-2-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
help_oneline is declared and starts as:
static void help_oneline(const char *cmd, const cmdinfo_t *ct)
{
if (cmd) {
printf("%s ", cmd);
} else {
printf("%s ", ct->name);
if (ct->altname) {
printf("(or %s) ", ct->altname);
}
}
However, there are only two routes to help_oneline being called:
help_f -> help_all -> help_oneline(ct->name, ct)
help_f -> help_onecmd(argv[1], ct)
In the first case, 'cmd' and 'ct->name' are the same thing,
so it's impossible for the if (cmd) to be false and then validly
print ct->name - this is upsetting gcc
( https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96739 )
In the second case, cmd is argv[1] and we know we've got argv[1]
so again (cmd) is non-NULL.
Simplify help_oneline by just printing cmd.
(Also strengthen argc check just to be pedantic)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200824102914.105619-1-dgilbert@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This filter was added back in 2017 for QEMU 2.11 but it was never
properly documented, so let's explain how it works and add a couple of
examples.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200921173016.27935-1-berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
macOS is shipped with a very old version of the bash (3.2), which
is currently not suitable for running the iotests anymore (e.g.
it is missing support for "readarray" which is used in the file
tests/qemu-iotests/common.filter). Add a check to skip the iotests
in this case - if someone still wants to run the iotests on macOS,
they can install a newer version from homebrew, for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200918153514.330705-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use self-explicit NANOSECONDS_PER_SECOND definition instead
of magic value.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200921110145.520944-1-philmd@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- drop python 3.5 test from travis
- replace Debian 9 containers with 10
- increase cross build timeout
- bump minimum python version in configure
- move user plugins tests to gitlab
- split deprecated builds into build and test
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl93EEwACgkQ+9DbCVqe
KkRfagf/SPYLUoJTwJpE3GBPFEGaBWT3cD25RxWPlrndQSdarxLfdqF5szfnRVcL
lAS/JRIlxw1sTlYPAW8OLp/WPRaI9s2ZRBQNtUGiTxCwsSNT8mnmkhg1GDkIM+KH
tcAuXfxlq6eK52QPU5+8TKW+geaGHv4vDwlWxXDC9sE+0MKva4tJ7c0LWZjZVcc4
bmnS+mwqP75ywvAilxKRSN55Ecn4f8mfhiN/f0C0M6613Y7kv/pgZvKLOG3GGVa4
m3X52A5zR2q9s49XRrp+FOJ+2kxgE+moNDLm5hQTSEaEiIwxxuW5IdmmXjQyIbpG
RkXe+lWF3aaaC5lzRfH0DgnDY4kxtw==
=5QLP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-python-021020-1' into staging
Python testing updates:
- drop python 3.5 test from travis
- replace Debian 9 containers with 10
- increase cross build timeout
- bump minimum python version in configure
- move user plugins tests to gitlab
- split deprecated builds into build and test
# gpg: Signature made Fri 02 Oct 2020 12:34:36 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-python-021020-1:
gitlab: split deprecated job into build/check stages
gitlab: move linux-user plugins test across to gitlab
configure: Bump the minimum required Python version to 3.6
gitlab-ci: Increase the timeout for the cross-compiler builds
tests/docker: Remove old Debian 9 containers
shippable.yml: Remove the Debian9-based MinGW cross-compiler tests
tests/docker: Update the tricore container to debian 10
gitlab-ci: Remove the Debian9-based containers and containers-layer3
tests/docker: Use Fedora containers for MinGW cross-builds in the gitlab-CI
travis.yml: Drop the Python 3.5 build
travis.yml: Drop the superfluous Python 3.6 build
travis.yml: Update Travis to use Bionic and Focal instead of Xenial
travis.yml: Drop the default softmmu builds
migration: Silence compiler warning in global_state_store_running()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As with the other crypto functions, we only implement subcode 0 (query)
and no actual encryption/decryption. We now implement S390_FEAT_MSA_EXT_8.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We implement all relevant instructions.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We need new CC handling, determining the CC based on the intermediate
result (64bit for MSC and MSRKC, 128bit for MSGC and MSGRKC).
We want to store out2 ("low") after muls128 to r1, so add
"wout_out2_r1".
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just like BRANCH ON CONDITION - however the address is read from memory
(always 8 bytes are read), we have to wrap the address manually. The
address is read using current CPU DAT/address-space controls, just like
ordinary data.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Just like MULTIPLY HALFWORD IMMEDIATE (MGHI), only the second operand
(signed 16 bit) comes from memory.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Multiply two signed 64bit values and store the 128bit result in r1 (0-63)
and r1 + 1 (64-127).
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Easy, just like ADD HALFWORD IMMEDIATE (AGHI).
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200928122717.30586-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
vfio_get_dev_region_info() unconditionally allocates memory
for a passed-in vfio_region_info structure (and does not re-use
an already allocated structure). Therefore, we have to free
the structure we pass to that function in vfio_ccw_get_region()
for every region we successfully obtained information for.
Fixes: 8fadea24de ("vfio-ccw: support async command subregion")
Fixes: 46ea3841ed ("vfio-ccw: Add support for the schib region")
Fixes: f030532f2a ("vfio-ccw: Add support for the CRW region and IRQ")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200928101701.13540-1-cohuck@redhat.com>
Recent upstream Linux uses the MONITOR CALL instruction for things like
BUG_ON() and WARN_ON(). We currently inject an operation exception when
we hit a MONITOR CALL instruction - which is wrong, as the instruction
is not glued to specific CPU features.
Doing a simple WARN_ON_ONCE() currently results in a panic:
[ 18.162801] illegal operation: 0001 ilc:2 [#1] SMP
[ 18.162889] Modules linked in:
[...]
[ 18.165476] Kernel panic - not syncing: Fatal exception: panic_on_oops
With a proper implementation, we now get:
[ 18.242754] ------------[ cut here ]------------
[ 18.242855] WARNING: CPU: 7 PID: 1 at init/main.c:1534 [...]
[ 18.242919] Modules linked in:
[...]
[ 18.246262] ---[ end trace a420477d71dc97b4 ]---
[ 18.259014] Freeing unused kernel memory: 4220K
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200918085122.26132-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
DIAGNOSE 0x318 (diag318) is an s390 instruction that allows the storage
of diagnostic information that is collected by the firmware in the case
of hardware/firmware service events.
QEMU handles the instruction by storing the info in the CPU state. A
subsequent register sync will communicate the data to the hypervisor.
QEMU handles the migration via a VM State Description.
This feature depends on the Extended-Length SCCB (els) feature. If
els is not present, then a warning will be printed and the SCLP bit
that allows the Linux kernel to execute the instruction will not be
set.
Availability of this instruction is determined by byte 134 (aka fac134)
bit 0 of the SCLP Read Info block. This coincidentally expands into the
space used for CPU entries, which means VMs running with the diag318
capability may not be able to read information regarding all CPUs
unless the guest kernel supports an extended-length SCCB.
This feature is not supported in protected virtualization mode.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-9-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As more features and facilities are added to the Read SCP Info (RSCPI)
response, more space is required to store them. The space used to store
these new features intrudes on the space originally used to store CPU
entries. This means as more features and facilities are added to the
RSCPI response, less space can be used to store CPU entries.
With the Extended-Length SCCB (ELS) facility, a KVM guest can execute
the RSCPI command and determine if the SCCB is large enough to store a
complete reponse. If it is not large enough, then the required length
will be set in the SCCB header.
The caller of the SCLP command is responsible for creating a
large-enough SCCB to store a complete response. Proper checking should
be in place, and the caller should execute the command once-more with
the large-enough SCCB.
This facility also enables an extended SCCB for the Read CPU Info
(RCPUI) command.
When this facility is enabled, the boundary violation response cannot
be a result from the RSCPI, RSCPI Forced, or RCPUI commands.
In order to tolerate kernels that do not yet have full support for this
feature, a "fixed" offset to the start of the CPU Entries within the
Read SCP Info struct is set to allow for the original 248 max entries
when this feature is disabled.
Additionally, this is introduced as a CPU feature to protect the guest
from migrating to a machine that does not support storing an extended
SCCB. This could otherwise hinder the VM from being able to read all
available CPU entries after migration (such as during re-ipl).
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-7-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The start of the CPU entry region in the Read SCP Info response data is
denoted by the offset_cpu field. As such, QEMU needs to begin creating
entries at this address.
This is in preparation for when Read SCP Info inevitably introduces new
bytes that push the start of the CPUEntry field further away.
Read CPU Info is unlikely to ever change, so let's not bother
accounting for the offset there.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-6-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The SCCB must be checked for a sufficient length before it is filled
with any data. If the length is insufficient, then the SCLP command
is suppressed and the proper response code is set in the SCCB header.
While we're at it, let's cleanup the length check by placing the
calculation inside a macro.
Fixes: 832be0d8a3 ("s390x: sclp: Report insufficient SCCB length")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-5-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The header contained within the SCCB passed to the SCLP service call
contains the actual length of the SCCB. Instead of allocating a static
4K size for the work sccb, let's allow for a variable size determined
by the value in the header. The proper checks are already in place to
ensure the SCCB length is sufficent to store a full response and that
the length does not cross any explicitly-set boundaries.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-4-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Functions within read scp/cpu info will need access to the machine
state. Let's make a call to retrieve the machine state once and
pass the appropriate data to the respective functions.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-2-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While the job is pretty fast for only a few targets we still want to
catch breakage of the build. By splitting the test step we can
allow_failures for that while still ensuring we don't miss the build
breaking.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201002091538.3017-1-alex.bennee@linaro.org>
Even with the recent split moving beefier plugins into contrib and
dropping them from the check-tcg tests we are still hitting time
limits. This possibly points to a slow down of --debug-tcg but seeing
as we are migrating stuff to gitlab we might as well move there and
bump the timeout.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201002103223.24022-1-alex.bennee@linaro.org>
