Commit Graph

160 Commits

Author SHA1 Message Date
Helge Deller ee1ac3a182 linux-user: Add sockopts for IPv6 ping and IPv6 traceroute
Add the neccessary sockopts for ping and traceroute on IPv6.

This fixes the following qemu warnings with IPv6:
Unsupported ancillary data: 0/2
Unsupported ancillary data: 0/11
Unsupported ancillary data: 41/25
Unsupported setsockopt level=0 optname=12
Unsupported setsockopt level=41 optname=16
Unsupported setsockopt level=41 optname=25
Unsupported setsockopt level=41 optname=50
Unsupported setsockopt level=41 optname=51
Unsupported setsockopt level=41 optname=8
Unsupported setsockopt level=58 optname=1

Tested with hppa-linux-user (big-endian) on x86_64 (little-endian).

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170218223130.GA25278@ls3530.fritz.box>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2017-02-27 23:10:02 +01:00
Helge Deller 21992cb679 linux-user: Add FICLONE and FICLONERANGE ioctls
Add missing FICLONE and FICLONERANGE ioctls.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170211222602.GA6399@ls3530.fritz.box>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2017-02-16 15:29:30 +01:00
Marek Vasut a0a839b65b nios2: Add usermode binaries emulation
Add missing bits for qemu-user required for emulating Altera Nios2
userspace binaries.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-4-marex@denx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-24 13:10:35 -08:00
Richard Henderson a10d1e50d9 linux-user: Add HPPA definitions to syscall_defs.h 2017-01-23 09:52:39 -08:00
Helge Deller b5c375e2fa linux-user: Add some hppa ioctls
Add F_GETLK, F_SETLK, F_SETLKW, F_GETOWN, F_SETOWN, F_SETSIG, F_GETSIG,
F_GETLK64, F_SETLK64 and F_SETLKW64 for hppa.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:39 -08:00
Helge Deller 405b491504 linux-user: Add SIOCGPGRP, SIOCGSTAMP, SIOCGSTAMPNS
Mirror syscall_defs.h for the element type of struct timeval
and struct timespec, even though that's not 100% accurate for
each guest.

Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Changed the MK_ARRAY types as per above; added ioctl.h entries.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-22 18:14:10 -08:00
Richard Henderson 429b31a205 Revert "Remove remainders of HPPA backend"
This reverts commit d41f3c3cc7.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-22 18:13:56 -08:00
Peter Maydell 17351c3f11 linux-user: Fix definition of target_sigevent for 32-bit guests
The sigevent structure includes a union with some fields which
are pointers. For the QEMU target_sigevent structure we must
represent these as abi_ulongs, not host function pointers.

This error was causing the compiler to believe it should 8-align
the _sigev_un union on a 64-bit host, which meant that the
code in target_to_host_sigevent() was looking at the wrong
offset to find the _tid field, and timer_create() would
spuriously fail with EINVAL.

This fixes the final loose end noted in LP:1042388.

While we're editing the structure, switch the 'int32_t' fields
to 'abi_int'; this will only matter for guests with non-standard
integer alignment like m68k.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:41 +03:00
Aleksandar Markovic da2c8ad7a5 linux-user: Fix syslog() syscall support
There are currently several problems related to syslog() support.

For example, if the second argument "bufp" of target syslog() syscall
is NULL, the current implementation always returns error code EFAULT.
However, NULL is a perfectly valid value for the second argument for
many use cases of this syscall. This is, for example, visible from
this excerpt of man page for syslog(2):

> EINVAL Bad arguments (e.g., bad type; or for type 2, 3, or 4, buf is
>        NULL, or len is less than zero; or for type 8, the level is
>        outside the range 1 to 8).

Moreover, the argument "bufp" is ignored for all cases of values of the
first argument, except 2, 3 and 4. This means that for such cases
(the first argument is not 2, 3 or 4), there is no need to pass "buf"
between host and target, and it can be set to NULL while calling host's
syslog(), without loss of emulation accuracy.

Note also that if "bufp" is NULL and the first argument is 2, 3 or 4, the
correct returned error code is EINVAL, not EFAULT.

All these details are reflected in this patch.

"#ifdef TARGET_NR_syslog" is also proprerly inserted when needed.

Support for Qemu's "-strace" switch for syslog() syscall is included too.

LTP tests syslog11 and syslog12 pass with this patch (while fail without
it), on any platform.

Changes to original patch by Riku Voipio:

 fixed error paths in TARGET_SYSLOG_ACTION_READ_ALL to match

http://lxr.free-electrons.com/source/kernel/printk/printk.c?v=4.7#L1335

Should fix also the build error in:

https://lists.gnu.org/archive/html/qemu-devel/2016-10/msg03721.html

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:40 +03:00
Aleksandar Markovic ff71a4545c linux-user: Fix socketcall() syscall support
Since not all Linux host platforms support socketcall() (most notably
Intel), do_socketcall() function in Qemu's syscalls.c is implemented to
mirror the corespondant implementation of socketcall() in Linux kernel,
and to utilise individual socket operations that are supported on all
Linux platforms. (see kernel source file net/socket.c, definition of
socketcall).

However, error codes produced by Qemu implementation are wrong for the
cases of invalid values of the first argument. Also, naming of constants
is not consistent with kernel one, and not consistant with Qemu convention
of prefixing such constants with "TARGET_". This patch in that light
brings do_socketcall() closer to its kernel counterpart, and in that way
fixes the errors and yields more consisrtent Qemu code.

There were also three missing cases (among 20) for strace support for
socketcall(). The array that contains pointers for appropriate printing
functions is updated with 3 elements, however pointers to functions are
left NULL, and its implementation is left for future.

Also, this patch fixes failure of LTP test socketcall02, if executed on some
Qemu emulated sywstems (uer mode).

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:40 +03:00
Aleksandar Markovic 19f59bcef9 linux-user: Add support for adjtimex() syscall
This patch implements Qemu user mode adjtimex() syscall support.

Syscall adjtimex() reads and optionally sets parameters for a clock
adjustment algorithm used in network synchonization or similar scenarios.

Its declaration is:

int adjtimex(struct timex *buf);

The correspondent source code in the Linux kernel is at kernel/time.c,
line 206.

The Qemu implementation is based on invocation of host's adjtimex(), and
its key part is in the "TARGET_NR_adjtimex" case segment of the the main
switch statement of the function do_syscall(), in linux-user/syscalls.c. All
necessary conversions of the data structures from target to host and from
host to target are covered. Two new functions, target_to_host_timex() and
host_to_target_timex(), are provided for the purpose of such conversions.
For that purpose, the support for related structure "timex" had tp be added
to the file linux-user/syscall_defs.h, based on its definition in Linux
kernel. Also, the relevant support for "-strace" Qemu option is included
in files linux-user/strace.c and linux-user/strace.list.

This patch also fixes failures of LTP tests adjtimex01 and adjtimex02, if
executed in Qemu user mode.

Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-10-21 15:19:39 +03:00
Aleksandar Markovic 8a8001b147 linux-user: Fix structure target_flock definition for Mips
Structure flock is defined for Mips in a way different from any
other platform. For reference, see Linux kernel source code files:

arch/mips/include/uapi/asm/fcntl.h, line 63 (for Mips)
include/uapi/asm-generic/fcntl.h, line 195 (for all other platforms)

This patch fix this problem, by amending structure target_flock,
for Mips only.

Besides, this patch fixes LTP tests fcntl11, fcntl17, fcntl19, fcntl20,
and fcntl21, which are currently failing, if executed in Qemu user mode
for Mips platforms.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-23 07:07:33 +01:00
Aleksandar Markovic 3a87a954c8 linux-user: Fix TARGET_F_GETOWN definition for Mips
For some reason, Qemu's TARGET_F_GETOWN constant for Mips does not
match the correct value of correspondent F_GETOWN. This patch fixes
this problem.

For reference, see Mips' F_GETOWN definition in Linux kernel at
arch/mips/include/uapi/asm/fcntl.h#L44.

This patch also fixes some fcntl()-related LTP tests for Qemu
user mode for Mips.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-23 07:07:32 +01:00
Aleksandar Markovic e1be160691 linux-user: Fix TARGET_SIOCATMARK definition for Mips
This patch fixes wrong definition of TARGET_SIOCATMARK for mips,
alpha, and sh4.

The current definition is:

  #define SIOCATMARK      0x8905

while the correct definition is:

  #define SIOCATMARK      TARGET_IOR('s', 7, int)

See Linux kernel source file arch/mips/include/uapi/asm/sockios.h#L19
for reference.

This patch also a fixes LTP test failure for test sockioctl01, for
mips, alpha, and sh4.

Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-23 07:07:31 +01:00
Peter Maydell 2ba7fae3bd linux-user: Check for bad event numbers in epoll_wait
The kernel checks that the maxevents parameter to epoll_wait
is non-negative and not larger than EP_MAX_EVENTS. Add this
check to our implementation, so that:
 * we fail these cases EINVAL rather than EFAULT
 * we don't pass negative or overflowing values to the
   lock_user() size calculation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:25:26 +03:00
Peter Maydell 6080723102 linux-user: Implement FS_IOC_GETFLAGS and FS_IOC_SETFLAGS ioctls
Implement the FS_IOC_GETFLAGS and FS_IOC_SETFLAGS ioctls, as used
by chattr.

Note that the type information encoded in these ioctl numbers
is at odds with the actual type the kernel accesses, as discussed
in http://thread.gmane.org/gmane.linux.file-systems/80164.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21 14:24:47 +03:00
Thomas Huth d41f3c3cc7 Remove remainders of HPPA backend
The HPPA backend has been removed by the following commit:

    802b508123
    tcg-hppa: Remove tcg backend

But some small pieces of the HPPA backend still survived until
today. Since we also do not have support for a HPPA target in
QEMU, we can nowadays safely remove the remaining HPPA parts
(like the disassembler code, or the detection of HPPA in the
configure script).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-15 15:32:22 +03:00
Peter Maydell 4715856a68 linux-user: Add some new blk ioctls
Add some new blk ioctls (these are 0x12,119 through
to 0x12,127). Several of these are used by mke2fs; this silences
the warnings:

mke2fs 1.42.12 (29-Aug-2014)
Unsupported ioctl: cmd=0x127b
Unsupported ioctl: cmd=0x127a
warning: Unable to get device geometry for /dev/loop5
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x1277

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19 15:23:17 +03:00
Peter Maydell 884cdc48a9 linux-user: Add loop control ioctls
Add support for the /dev/loop-control ioctls:
 LOOP_CTL_ADD
 LOOP_CTL_REMOVE
 LOOP_CTL_GET_FREE

[RV: fixed to apply to new header guards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19 15:22:33 +03:00
Markus Armbruster 1b3c4fdf30 linux-user: Fix broken header guard in syscall_defs.h
Found with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Laurent Vivier fb3aabf384 linux-user: add socketcall() strace
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-26 13:17:21 +03:00
Peter Maydell 7e3b92ece0 linux-user: Support F_GETPIPE_SZ and F_SETPIPE_SZ fcntls
Support the F_GETPIPE_SZ and F_SETPIPE_SZ fcntl operations.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-26 13:17:21 +03:00
Peter Maydell 8efb2ed5ec linux-user: Correct signedness of target_flock l_start and l_len fields
The l_start and l_len fields in the various target_flock structures are
supposed to be '__kernel_off_t' or '__kernel_loff_t', which means they
should be signed, not unsigned. Correcting the structure definitions means
that __get_user() and __put_user() will correctly sign extend them if
the guest is using 32 bit offsets and the host is using 64 bit offsets.

This fixes failures in the LTP 'fcntl14' tests where it checks that
negative seek offsets work correctly.

We reindent the structures to drop hard tabs since we're touching 40%
of the fields anyway.

RV: long long -> abi_llong as suggested by Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-08 12:06:50 +03:00
Peter Maydell a70dadc7f1 linux-user: Use both si_code and si_signo when converting siginfo_t
The siginfo_t struct includes a union. The correct way to identify
which fields of the union are relevant is complicated, because we
have to use a combination of the si_code and si_signo to figure out
which of the union's members are valid.  (Within the host kernel it
is always possible to tell, but the kernel carefully avoids giving
userspace the high 16 bits of si_code, so we don't have the
information to do this the easy way...) We therefore make our best
guess, bearing in mind that a guest can spoof most of the si_codes
via rt_sigqueueinfo() if it likes.  Once we have made our guess, we
record it in the top 16 bits of the si_code, so that tswap_siginfo()
later can use it.  tswap_siginfo() then strips these top bits out
before writing si_code to the guest (sign-extending the lower bits).

This fixes a bug where fields were sometimes wrong; in particular
the LTP kill10 test went into an infinite loop because its signal
handler got a si_pid value of 0 rather than the pid of the sending
process.

As part of this change, we switch to using __put_user() in the
tswap_siginfo code which writes out the byteswapped values to
the target memory, in case the target memory pointer is not
sufficiently aligned for the host CPU's requirements.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-06-07 16:39:08 +03:00
Peter Maydell 716f3fbef2 linux-user: x86_64: Don't use 16-bit UIDs
The 64-bit x86 syscall ABI uses 32-bit UIDs; only define
USE_UID16 for 32-bit x86.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27 14:50:39 +03:00
John Paul Adrian Glaubitz 5a53dc5042 linux-user: Add SOCKOP_sendmmsg and SOCKOP_recvmmsg socket call, wire them up.
Adds the definitions for the socket calls SOCKOP_sendmmsg
and SOCKOP_recvmmsg and wires them up with the rest of the code.
The necessary function do_sendrecvmmsg() is already present in
linux-user/syscall.c. After adding these two definitions and wiring
them up, I no longer receive an error message about the
unimplemented socket calls when running "apt-get update" on Debian
unstable running on qemu with glibc_2.21 on m68k.

Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-11 14:54:03 +02:00
Laurent Vivier 928bed6a05 linux-user: correctly align target_epoll_event
According to comments in /usr/include/linux/eventpoll.h,
poll_event is packed only on x86_64.

And to be sure fields are correctly aligned in epoll_data,
use abi_XXX types for all of them.

Moreover, fd type is wrong: fd is int, not ulong.

This has been tested with a ppc guest on an x86_64 host:
without this patch, systemd crashes (core).

CC: Alexander Graf <agraf@suse.de>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-01-08 11:36:12 +02:00
Chen Gang de2fdd56b1 linux-user/syscall_defs.h: Sync the latest si_code from Linux kernel
They content several new macro members, also contents TARGET_N*.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443240605-2924-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:03:15 +11:00
Jonathan Neuschäfer ee1045877a linux-user: fix cmsg conversion in case of multiple headers
Currently, __target_cmsg_nxthdr compares a pointer derived from
target_cmsg against the msg_control field of target_msgh (through
subtraction).  This failed for me when emulating i386 code under x86_64,
because pointers in the host address space and pointers in the guest
address space were not the same.  This patch passes the initial value of
target_cmsg into __target_cmsg_nxthdr.

I found and fixed two more related bugs:
- __target_cmsg_nxthdr now returns the new cmsg pointer instead of the
  old one.
- tgt_space (in host_to_target_cmsg) doesn't count "sizeof (struct
  target_cmsghdr)" twice anymore.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:39:43 +03:00
Chen Gang b16189b222 linux-user: Support tilegx architecture in linux-user
Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.

[rth: Moved all of the implementation of atomic instructions to a later patch.]

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:41:19 -07:00
Veres Lajos 67cc32ebfd typofixes - v4
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:45:43 +03:00
Leon Alrae 1ab2aea248 linux-user: correct stat structure in MIPS N32
Simple "hello world" MIPS N32 userland program crashes with segfault due to
incorrectly defined stat structure in QEMU.

Correct "target_stat" definition to match kernel's "stat64" as in MIPS N32
there are only plain "stat" syscalls using 64-bit structure.

Reported-by: Daniel Sanders <daniel.sanders@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Daniel Sanders <daniel.sanders@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
2015-02-13 14:11:29 +00:00
Maxim Ostapenko aa5e03d2aa linux-user: wrong TARGET_SI_PAD_SIZE value for some targets.
Fix TARGET_SI_PAD_SIZE calculation to match the way the kernel does it.
Use different TARGET_SI_PREAMBLE_SIZE for 32-bit and 64-bit targets.

Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:20 +03:00
Alexander Graf aecc88616a linux-user: Fix up timer id handling
When creating a timer handle, we give the timer id a special magic offset
of 0xcafe0000. However, we never mask that offset out of the timer id before
we start using it to dereference our timer array. So we always end up aborting
timer operations because the timer id is out of bounds.

This was not an issue before my patch e52a99f756 ("linux-user: Simplify
timerid checks on g_posix_timers range") because before we would blindly mask
anything above the first 16 bits.

This patch simplifies the code around timer id creation by introducing a proper
target_timer_id typedef that is s32, just like Linux has it. It also changes the
magic offset to a value that makes all timer ids be positive.

Reported-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-11-11 08:13:09 +02:00
Joakim Tjernlund 33a29b51c9 linux-user: handle AF_PACKET sockaddrs in target_to_host_sockaddr
Implement conversion of the AF_PACKET sockaddr subtype
in target_to_host_sockaddr.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-07-15 16:28:25 +03:00
Paul Burton f63eb01ac7 linux-user: support the SIOCGIFINDEX ioctl
Add a definition of the SIOCGIFINDEX ioctl, allowing its use by target
programs.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Paul Burton ca56f5b596 linux-user: support the KDSIGACCEPT ioctl
Add a definition of the KDSIGACCEPT ioctl & allow its use by target
programs.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Paul Burton ef4467e911 linux-user: respect timezone for settimeofday
The settimeofday syscall accepts a tz argument indicating the desired
timezone to the kernel. QEMU previously ignored any argument provided
by the target program & always passed NULL to the kernel. Instead,
translate the argument & pass along the data userland provided.

Although this argument is described by the settimeofday man page as
obsolete, it is used by systemd as of version 213.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Paul Burton fd76783243 linux-user: fix struct target_epoll_event layout for MIPS
MIPS requires the pad field to 64b-align the data field just as ARM
does.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-29 14:19:59 +03:00
Natanael Copa 34d6086236 linux-user: avoid using glibc internals in _syscall5 and in definition of target_sigevent struct
Use the public sigset_t instead of the glibc specific internal
__sigset_t in _syscall.

Calculate the sigevent pad size is calculated in similar way as kernel
does it instead of using glibc internal field _pad.

This is needed for building with musl libc.

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-02 21:59:28 +03:00
Peter Maydell e0eb210ec0 linux-user: Implement capget, capset
Implement the capget and capset syscalls. This is useful because
simple programs like 'ls' try to use it in AArch64, and otherwise
we emit a lot of noise about it being unimplemented.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-17 15:26:58 +02:00
Andreas Schwab 8d5d30046b linux-user: implement F_[GS]ETOWN_EX
F_GETOWN is replaced by F_GETOWN_EX inside the glibc fcntl wrapper

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-17 11:44:31 +02:00
Alexander Graf f19e00d776 linux-user: Implement sendmmsg syscall
Glibc when built for newer kernels assumes that the sendmmsg syscall is
available. Without it, dns resolution simply fails to work.

Wrap the syscall with existing infrastructure so that we don't have a host
dependency on sendmmsg.

To avoid locking the same area of guest memory twice (which will break if
DEBUG_REMAP is defined) we pull the lock/unlock part of do_sendrecvmsg()
out into its own function so the actual implementation can be shared.

Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: add recvmmsg support;
 handle errors (which also implies support for non-blocking operations);
 cap the vector length as the kernel implementation does;
 don't lock guest memory twice;
 support MSG_WAITFORONE flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-03-03 23:08:09 +02:00
Andreas Schwab cd98d390ae linux-user: Don't use UID16 on AArch64
The AArch64 kernel defines its __kernel_uid_t type as 32 bits, unlike
32 bit ARM, so don't enable our 16-bit UID wrapper handling.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-03-03 23:03:25 +02:00
Andreas Färber fff8c539bd linux-user: Implement BLKPG ioctl
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-19 12:29:23 +02:00
André Hentschel b9d36eb2c7 linux-user: Support the accept4 socketcall
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-01-10 08:51:36 +02:00
Erik de Castro Lopo 905bba13ca linux-user: Add target struct defs needed for POSIX timer syscalls.
Signed-off-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-11-29 10:58:10 +02:00
Stefan Weil 20d155bc90 linux-user: Fix stat64 syscall for SPARC64
Some targets use a stat64 structure for the stat64 syscall while others
use a stat structure. SPARC64 used the wrong kind.

Instead of extending the conditional compilation in syscall.c, now a
macro TARGET_HAS_STRUCT_STAT64 is defined whenever a target has a
target_stat64.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
2013-11-07 07:02:44 +01:00
Laurent Vivier f57d419241 linux-user: Add setsockopt(SO_ATTACH_FILTER)
This is needed to be able to run dhclient.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-09-24 10:47:06 +03:00
Alexander Graf 09701199f6 linux-user: Fix up AArch64 syscall handlers
Some syscall handlers have special code for ARM enabled that we don't
need on AArch64. Exclude AArch64 in those cases. In other places we
can share struct definitions with other targets or have to provide our
own.

With this patch applied, most syscall definitions in linux-user should
be sound for AArch64.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-16-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-9-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10 19:11:28 +01:00