If bdrv_block_status_above() fails, we are aborting the convert
process but failing to print an error message. Broken in commit
690c7301 (v2.4) when rewriting convert's logic.
Discovered when teaching nbdkit to support NBD_CMD_BLOCK_STATUS, and
accidentally violating the protocol by returning more than one extent
in spite of qemu asking for NBD_CMD_FLAG_REQ_ONE. The qemu NBD code
should probably handle the server's non-compliance more gracefully
than failing with EINVAL, but qemu-img shouldn't be silently
squelching any block status failures. It doesn't help that qemu 3.1
masks the qemu-img bug with extra noise that the nbd code is dumping
to stderr (that noise was cleaned up in d8b4bad8).
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190323212639.579-2-eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
If qemu-img convert sees that the target image isn't zero-initialised
yet, it tries to do an efficient zero write for the whole image first
to save the overhead of repeated explicit zero writes during the
conversion. Obviously, this provides only an advantage if the
pre-zeroing is actually efficient. Otherwise, we can end up writing
zeroes slowly while zeroing out the whole image, and then overwrite the
same blocks again with real data, potentially doubling the written data.
Pass BDRV_REQ_NO_FALLBACK to blk_make_zero() to avoid this case. If we
can't efficiently zero out, we'll instead write explicit zeroes only if
there is no data to be written to a block.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
bdrv_iterate_format (which is currently only used for printing out the
formats supported by the block layer) doesn't take format whitelisting
into account.
This creates a problem for tests: they enumerate supported formats to
decide which tests to enable, but then discover that QEMU doesn't let
them actually use some of those formats.
To avoid that, exclude formats that are not whitelisted from
enumeration, if whitelisting is in use. Since we have separate
whitelists for r/w and r/o, take this a parameter to
bdrv_iterate_format, and print two lists of supported formats (r/w and
r/o) in main qemu.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
-----BEGIN PGP SIGNATURE-----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=gaah
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make bdrv_get_full_backing_filename_from_filename() return an allocated
string instead of placing the result in a caller-provided buffer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Before this patch, bdrv_refresh_filename() is used in a pushing manner:
Whenever the BDS graph is modified, the parents of the modified edges
are supposed to be updated (recursively upwards). However, that is
nonviable, considering that we want child changes not to concern
parents.
Also, in the long run we want a pull model anyway: Here, we would have a
bdrv_filename() function which returns a BDS's filename, freshly
constructed.
This patch is an intermediate step. It adds bdrv_refresh_filename()
calls before every place a BDS.filename value is used. The only
exceptions are protocol drivers that use their own filename, which
clearly would not profit from refreshing that filename before.
Also, bdrv_get_encrypted_filename() is removed along the way (as a user
of BDS.filename), since it is completely unused.
In turn, all of the calls to bdrv_refresh_filename() before this patch
are removed, because we no longer have to call this function on graph
changes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Error reporting for user_creatable_add_opts_foreach was changed so that
it no longer called 'error_report_err' in:
commit 7e1e0c1112
Author: Markus Armbruster <armbru@redhat.com>
Date: Wed Oct 17 10:26:43 2018 +0200
qom: Clean up error reporting in user_creatable_add_opts_foreach()
Some callers were updated to pass in "&error_fatal" but all the ones in
qemu-img were left passing NULL. As a result all errors went to
/dev/null instead of being reported to the user.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After the previous patch, the only instance of this function left
is inside qemu-img.c.
qemu-img is using it inside the 'img_snapshot' function to delete
snapshots in the SNAPSHOT_DELETE case, based on a "snapshot_name"
string that refers to the tag, not ID, of the QEMUSnapshotInfo struct.
This can be verified by checking the SNAPSHOT_CREATE case that
comes shortly before SNAPSHOT_DELETE. In that case, the same
"snapshot_name" variable is being strcpy to the 'name' field
of the QEMUSnapshotInfo struct sn:
pstrcpy(sn.name, sizeof(sn.name), snapshot_name);
Based on that, it is unlikely that "snapshot_name" might contain
an "id" in SNAPSHOT_DELETE.
This patch changes SNAPSHOT_DELETE to use snapshot_find() and
snapshot_delete() instead of bdrv_snapshot_delete_by_id_or_name.
After that, there is no instances left of bdrv_snapshot_delete_by_id_or_name
in the code, so it is safe to remove it entirely.
Suggested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-13-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-13-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On FreeBSD 11.2:
$ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd'
Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write
After main option parsing, we reinitialize optind so we can parse each
command. However reinitializing optind to 0 does not work on FreeBSD.
What happens when you do this is optind remains 0 after the option
parsing loop, and the result is we try to parse argv[optind] ==
argv[0] == "aio_write" as if it was the first parameter.
The FreeBSD manual page says:
In order to use getopt() to evaluate multiple sets of arguments, or to
evaluate a single set of arguments multiple times, the variable optreset
must be set to 1 before the second and each additional set of calls to
getopt(), and the variable optind must be reinitialized.
(From the rest of the man page it is clear that optind must be
reinitialized to 1).
The glibc man page says:
A program that scans multiple argument vectors, or rescans the same
vector more than once, and wants to make use of GNU extensions such as
'+' and '-' at the start of optstring, or changes the value of
POSIXLY_CORRECT between scans, must reinitialize getopt() by resetting
optind to 0, rather than the traditional value of 1. (Resetting to 0
forces the invocation of an internal initialization routine that
rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.)
This commit introduces an OS-portability function called
qemu_reset_optind which provides a way of resetting optind that works
on FreeBSD and platforms that use optreset, while keeping it the same
as now on other platforms.
Note that the qemu codebase sets optind in many other places, but in
those other places it's setting a local variable and not using getopt.
This change is only needed in places where we are using getopt and the
associated global variable optind.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190118101114.11759-2-rjones@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
create_opts was leaked here. This is not too bad since the process is
about to exit anyway, but relying on that does not make the code nicer
to read.
Fixes: d402b6a21a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes: d402b6a21a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Although the function block_job_get() can return NULL, it would be a
serious bug if it did so (because the job yields before executing anything
(if it started successfully); but otherwise, commit_active_start() would
have returned an error). However, as a precaution, before dereferencing
the 'job' pointer in img_commit() assert it is not NULL.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1541453919-25973-4-git-send-email-Liam.Merwick@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds some whitespace into the option help (including indentation)
and puts angle brackets around the type names. Furthermore, the list
name is no longer printed as part of every line, but only once in
advance, and only if the caller did not print a caption already.
This patch also restores the description alignment we had before commit
9cbef9d68e, just at 24 instead of 16 characters like we used to.
This increase is because now we have the type and two spaces of
indentation before the description, and with a usual type name length of
three chracters, this sums up to eight additional characters -- which
means that we now need 24 characters to get the same amount of padding
for most options. Also, 24 is a third of 80, which makes it kind of a
round number in terminal terms.
Finally, this patch amends the reference output of iotest 082 to match
the changes (and thus makes it pass again).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the convert command is creating an output file that needs
secrets, we need to ensure those secrets are passed to both the
blk_new_open and bdrv_create API calls.
This is done by qemu-img extracting all opts matching the name
suffix "key-secret". Unfortunately the code doing this was run after the
call to bdrv_create(), which meant the QemuOpts it was extracting
secrets from was now empty.
Previously this worked by luks as a bug meant the "key-secret"
parameters were not purged from the QemuOpts. This bug was fixed in
commit b76b4f6045
Author: Kevin Wolf <kwolf@redhat.com>
Date: Thu Jan 11 16:18:08 2018 +0100
qcow2: Use visitor for options in qcow2_create()
Exposing the latent bug in qemu-img. This fix simply moves the copying
of secrets to before the bdrv_create() call.
Cc: qemu-stable@nongnu.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the min_sparse convert parameter can overflow (e.g. -S 1024G)
in the conversion from int64_t to int resulting in a negative
min_sparse parameter. Avoid this by limiting the valid parameters
to sane values. In fact anything exceeding the convert buffer size
is also pointless. While at it also forbid values that are non
multiple of 512 to avoid undesired behaviour. For instance, values
between 1 and 511 were legal, but resulted in full allocation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We currently don't enforce that the sparse segments we detect during convert are
aligned. This leads to unnecessary and costly read-modify-write cycles either
internally in Qemu or in the background on the storage device as nearly all
modern filesystems or hardware have a 4k alignment internally.
This patch modifies is_allocated_sectors so that its *pnum result will always
end at an alignment boundary. This way all requests will end at an alignment
boundary. The start of all requests will also be aligned as long as the results
of get_block_status do not lead to an unaligned offset.
The number of RMW cycles when converting an example image [1] to a raw device that
has 4k sector size is about 4600 4k read requests to perform a total of about 15000
write requests. With this path the additional 4600 read requests are eliminated while
the number of total write requests stays constant.
[1] https://cloud-images.ubuntu.com/releases/16.04/release/ubuntu-16.04-server-cloudimg-amd64-disk1.vmdk
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass read flags and write flags separately. This is needed to handle
coming BDRV_REQ_NO_SERIALISING clearly in following patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No reason to forbid them, and they are needed to improve performance
with compress-threads in further patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit a290f085 exposed a latent bug in qemu-img map introduced
during the conversion of block status to be byte-based. Earlier in
commit 5e344dd8, the internal interface get_block_status() switched
to take byte-based parameters, but still called a sector-based
block layer function; as such, rounding was added in the lone
caller to obey the contract. However, commit 237d78f8 changed
get_block_status() to truly be byte-based, at which point rounding
to sector boundaries can result in calling bdrv_block_status() with
'bytes == 0' (a coding error) when the boundary between data and a
hole falls mid-sector (true for the past-EOF implicit hole present
in POSIX files). Fix things by removing the rounding that is now
no longer necessary.
See also https://bugzilla.redhat.com/1589738
Fixes: 237d78f8
Reported-by: Dan Kenigsberg <danken@redhat.com>
Reported-by: Nir Soffer <nsoffer@redhat.com>
Reported-by: Maor Lipchuk <mlipchuk@redhat.com>
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It has been marked as deprecated since QEMU v2.0 already, so it
is time now to finally remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1528288551-31641-1-git-send-email-thuth@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, qemu-img convert writes zeroes when it reads zeroes.
Sometimes it does not because the target is initialized to zeroes
anyway, so we do not need to overwrite (and thus potentially allocate)
it. This is never the case for targets with backing files, though. But
even they may have an area that is initialized to zeroes, and that is
the area past the end of the backing file (if that is shorter than the
overlay).
So if the target format's unallocated blocks are zero and there is a gap
between the target's backing file's end and the target's end, we do not
have to explicitly write zeroes there.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1527898
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501165750.19242-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, rebase interprets a relative path for the new backing image
as follows:
(1) Open the new backing image with the given relative path (thus relative to
qemu-img's working directory).
(2) Write it directly into the overlay's backing path field (thus
relative to the overlay).
If the overlay is not in qemu-img's working directory, both will be
different interpretations, which may either lead to an error somewhere
(either rebase fails because it cannot open the new backing image, or
your overlay becomes unusable because its backing path does not point to
a file), or, even worse, it may result in your rebase being performed
for a different backing file than what your overlay will point to after
the rebase.
Fix this by interpreting the target backing path as relative to the
overlay, like qemu-img does everywhere else.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1569835
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509182002.8044-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The only users of print_block_option_help() are qemu-img create and
qemu-img convert for the output image, so this function is always used
for image creation (it used to be used for amendment also, but that is
no longer the case).
So if image creation is not supported by either the format or the
protocol, there is no need to print any option description, because the
user cannot create an image like this anyway.
This also fixes an assertion failure:
$ qemu-img create -f bochs -o help
Supported options:
qemu-img: util/qemu-option.c:219:
qemu_opts_print_help: Assertion `list' failed.
[1] 24831 abort (core dumped) qemu-img create -f bochs -o help
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The more generic print_block_option_help() function is not really
suitable for qemu-img amend, for a couple of reasons:
(1) We do not need to append the protocol-level options, as amendment
happens only on one node and does not descend downwards to its
children.
(2) print_block_option_help() says those options are "supported". For
option amendment, we do not really know that. So this new function
explicitly says that those options are the creation options, and not
all of them may be supported.
(3) If the driver does not support option amendment, we should not print
anything (except for an error message that amendment is not
supported).
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It really is up to the caller to decide what this list of options means.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Looking at the qcow2 code that is riddled with error_report() calls,
this is really how it should have been from the start.
Along the way, turn the target_version/current_version comparisons at
the beginning of qcow2_downgrade() into assertions (the caller has to
make sure these conditions are met), and rephrase the error message on
using compat=1.1 to get refcount widths other than 16 bits.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509210023.20283-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of checking whether a driver has a non-NULL create_opts we
should check whether it supports image amendment in the first place. If
it does, it must have create_opts.
On the other hand, if it does not have create_opts (so it does not
support amendment either), the error message "does not support any
options" is a bit useless. Stating clearly that the driver has no
amendment support whatsoever is probably better.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The new blk_co_copy_range interface offers a more efficient way in the
case of network based storage. Make use of it to allow faster convert
operation.
Since copy offloading cannot do zero detection ('-S') and compression
(-c), only try it when these options are not used.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-11-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BlockJob has fields .offset and .len, which are actually misnomers today
because they are no longer tied to block device sizes, but just progress
counters. As such they make a lot of sense in generic Jobs.
This patch moves the fields to Job and renames them to .progress_current
and .progress_total to describe their function better.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of having a 'bool ready' in BlockJob, add a function that
derives its value from the job status.
At the same time, this fixes the behaviour to match what the QAPI
documentation promises for query-block-job: 'true if the job may be
completed'. When the ready flag was introduced in commit ef6dbf1e46,
the flag never had to be reset to match the description because after
being ready, the jobs would immediately complete and disappear.
Job transactions and manual job finalisation were introduced only later.
With these changes, jobs may stay around even after having completed
(and they are not ready to be completed a second time), however their
patches forgot to reset the ready flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This moves the finalisation of a single job from BlockJob to Job.
Some part of this code depends on job transactions, and job transactions
call this code, we introduce some temporary calls from Job functions to
BlockJob ones. This will be fixed once transactions move to Job, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Since we introduced an explicit status to block job, BlockJob.completed
is redundant because it can be derived from the status. Remove the field
from BlockJob and add a function to derive it from the status at the Job
level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This moves reference counting from BlockJob to Job.
In order to keep calling the BlockJob cleanup code when the job is
deleted via job_unref(), introduce a new JobDriver.free callback. Every
block job must use block_job_free() for this callback, this is asserted
in block_job_create().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Nothing seemingly uses this.
(jcody: commit 77bd1119ba even mentions that it appears unused)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
img_open_opts() takes a QemuOpts and converts them to a QDict, so all
values therein are strings. Then it may try to call qdict_get_bool(),
however, which will fail with a segmentation fault every time:
$ ./qemu-img info -U --image-opts \
driver=file,filename=/dev/null,force-share=off
[1] 27869 segmentation fault (core dumped) ./qemu-img info -U
--image-opts driver=file,filename=/dev/null,force-share=off
Fix this by using qdict_get_str() and comparing the value as a string.
Also, when adding a force-share value to the QDict, add it as a string
so it fits the rest of the dict.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some block drivers (iscsi and file-posix when dealing with device files)
do not actually support truncation, even though they provide a
.bdrv_truncate() method and will happily return success when providing a
new size that does not exceed the current size. This is because these
drivers expect the user to resize the image outside of qemu and then
provide qemu with that information through the block_resize command
(compare cb1b83e740).
Of course, anyone using qemu-img resize will find that behavior useless.
So we should check the actual size of the image after the supposedly
successful truncation took place, emit an error if nothing changed and
emit a warning if the target size was not met.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1523065
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421163957.29872-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2axz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (38 commits)
block: Fix NULL dereference on empty drive error
qcow2: Replace align_offset() with ROUND_UP()
block/ssh: Add basic .bdrv_truncate()
block/ssh: Make ssh_grow_file() blocking
block/ssh: Pull ssh_grow_file() from ssh_create()
qemu-img: Make resize error message more general
qcow2: make qcow2_co_create2() a coroutine_fn
block: rename .bdrv_create() to .bdrv_co_create_opts()
Revert "IDE: Do not flush empty CDROM drives"
block: test blk_aio_flush() with blk->root == NULL
block: add BlockBackend->in_flight counter
block: extract AIO_WAIT_WHILE() from BlockDriverState
aio: rename aio_context_in_iothread() to in_aio_context_home_thread()
docs: document how to use the l2-cache-entry-size parameter
specs/qcow2: Fix documentation of the compressed cluster descriptor
iotest 033: add misaligned write-zeroes test via truncate
block: fix write with zero flag set and iovector provided
block: Drop unused .bdrv_co_get_block_status()
vvfat: Switch to .bdrv_co_block_status()
vpc: Switch to .bdrv_co_block_status()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/block/block.h
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
The issue:
$ qemu-img resize -f qcow2 foo.qcow2
qemu-img: Expecting one image file name
Try 'qemu-img --help' for more information
So we gave an image file name, but we omitted the length. qemu-img
thinks the last argument is always the size and removes it immediately
from argv (by decrementing argc), and tries to verify that it is a valid
size only at a later point.
So we do not actually know whether that last argument we called "size"
is indeed a size or whether the user instead forgot to specify that size
but did give a file name.
Therefore, the error message should be more general.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1523458
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180205162745.23650-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
Eric Blake
Kevin Wolf
Andrey Shinkevich
Peter Maydell
Max Reitz
Daniel P. Berrangé
Daniel Henrique Barboza
Vladimir Sementsov-Ogievskiy
Richard W.M. Jones
Liam Merwick
Fam Zheng
Peter Lieven
Thomas Huth
John Snow
Marc-André Lureau
Markus Armbruster