Other variables (e.g. sectors_per_block) are calculated using these
variables, and if not range-checked illegal values could be obtained
causing infinite loops and other potential issues when calculating
BAT entries.
The 1.00 VHDX spec requires BlockSize to be min 1MB, max 256MB.
LogicalSectorSize is required to be either 512 or 4096 bytes.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.
Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Errors are inadvertently ignored in a few places. Has always been
broken. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If there is a dirty log file to be replayed in a VHDX image, it is
replayed in .vhdx_open(). However, if the file is opened read-only,
then a somewhat cryptic error message results.
This adds a more helpful error message for the user. If an image file
contains a log to be replayed, and is opened read-only, the user is
instructed to run 'qemu-img check -r all' on the image file.
Running qemu-img check -r all will cause the image file to be opened
r/w, which will replay the log file. If a log file replay is detected,
this is flagged, and bdrv_check will increase the corruptions_fixed
count for the image.
[Fixed typo in error message that was pointed out by Eric Blake
<eblake@redhat.com>.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for VHDX image creation, for images of type "Fixed"
and "Dynamic". "Differencing" types (i.e., VHDX images with backing
files) are currently not supported.
Options for image creation include:
* log size:
The size of the journaling log for VHDX. Minimum is 1MB,
and it must be a multiple of 1MB. Invalid log sizes will be
silently fixed by rounding up to the nearest MB.
Default is 1MB.
* block size:
This is the size of a payload block. The range is 1MB to 256MB,
inclusive, and must be a multiple of 1MB as well. Invalid sizes
and multiples will be silently fixed. If '0' is passed, then
a sane size is chosen (depending on virtual image size).
Default is 0 (Auto-select).
* subformat:
- "dynamic"
An image without data pre-allocated.
- "fixed"
An image with data pre-allocated.
Default is "dynamic"
When creating the image file, the lettered sections are created:
-----------------------------------------------------------------.
| (A) | (B) | (C) | (D) | (E)
| File ID | Header1 | Header 2 | Region Tbl 1 | Region Tbl 2
| | | | |
.-----------------------------------------------------------------.
0 64KB 128KB 192KB 256KB 320KB
.---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
| (F) | (G) | (H) |
| Journal Log | BAT / Bitmap | Metadata | .... data ......
| | | |
.---- ~ ----------- ~ ------------ ~ ---------------- ~ -----------.
1MB (var.) (var.) (var.)
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is preperation for vhdx_create(). The ability to write headers,
and calculate the number of BAT entries will be needed within the
create() functions, so move this relevant code into helper functions.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for vhdx_create(), move more endian translation
functions out to vhdx-endian.c.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bit shifting can be fun, but in this case it was unnecessary. The
upper 44 bits of the 64-bit BAT entry is specifies the File Offset,
so we shifted the bits to get access to the value.
However, per the spec the value is in MB. So we dutifully shifted back
to the left by 20 bits, to convert to a true uint64_t file offset.
This replaces those steps with just a bit mask, to get rid of the lower
20 bits instead.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for writing to VHDX image files, using coroutines.
Writes into the BAT table goes through the VHDX log. Currently, BAT
table writes occur when expanding a dynamic VHDX file, and allocating a
new BAT entry.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Regions in the image file cannot overlap - the log, region tables,
and metdata must all be unique and non-overlapping.
This adds region checking by means of a QLIST; there can be a variable
number of regions and metadata (there may be metadata or region tables
that we do not recognize / know about, but are not required).
This adds the capability to register a region for later checking, and
to check against registered regions for any overlap.
Also, if neither the BAT or Metadata region tables are found, return
error.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds support for VHDX v0 logs, as specified in Microsoft's
VHDX Specification Format v1.00:
https://www.microsoft.com/en-us/download/details.aspx?id=34750
The following support is added:
* Log parsing, and validation - validate that an existing log
is correct.
* Log search - search through an existing log, to find any valid
sequence of entries.
* Log replay and flush - replay an existing log, and flush/clear
the log when complete.
The VHDX log is a circular buffer, with elements (sectors) of 4KB.
A log entry is a variably-length number of sectors, that is
comprised of a header and 'descriptors', that describe each sector.
A log may contain multiple entries, know as a log sequence. In a log
sequence, each log entry immediately follows the previous entry, with an
incrementing sequence number. There can only ever be one active and
valid sequence in the log.
Each log entry must match the file log GUID in order to be valid (along
with other criteria). Once we have flushed all valid log entries, we
marked the file log GUID to be zero, which indicates a buffer with no
valid entries.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow tracking of first file write in the VHDX image, as well as
the ability to update the GUID in the header. This is in preparation
for log support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This moves the endian translation functions out from the vhdx.c source,
into a separate source file. In addition to the previously defined
endian functions, new endian translation functions for log support are
added as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for VHDX log support, move these structures to the
header.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.
As VHDX depends on uuid.h, VHDX is now a configurable build option. If
VHDX support is enabled, that will also enable uuid as well. The
default is to have VHDX enabled.
To enable/disable VHDX: --enable-vhdx, --disable-vhdx
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just a couple of minor comments to help note where allocated
buffers are freed, and a typo fix.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This blocks migration for VHDX image files, until the
functionality can be supported.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds in read-only support to the VHDX image format. This supports
reads for fixed-size, and dynamic sized VHDX images.
Differencing files are still unsupported.
The image must be opened without BDRV_O_RDWR set, because we do not
yet update the headers. I.e., pass 'readonly=on' in the drive image
options from the QEMU commandline.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the initial block driver framework for VHDX image support
(i.e. Hyper-V image file formats), that supports opening VHDX files, and
parsing the headers.
This commit does not yet enable:
- reading
- writing
- updating the header
- differencing files (images with parents)
- log replay / dirty logs (only clean images)
This is based on Microsoft's VHDX specification:
"VHDX Format Specification v0.95", published 4/12/2012
https://www.microsoft.com/en-us/download/details.aspx?id=29681
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
