Commit Graph

84 Commits

Author SHA1 Message Date
Peter Maydell f4e8e4edda arm: Remove workarounds for old M-profile exception return implementation
Now that we've rewritten M-profile exception return so that the magic
PC values are not visible to other parts of QEMU, we can delete the
special casing of them elsewhere.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-10-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 3bb8a96f53 arm: Implement M profile exception return properly
On M profile, return from exceptions happen when code in Handler mode
executes one of the following function call return instructions:
 * POP or LDM which loads the PC
 * LDR to PC
 * BX register
and the new PC value is 0xFFxxxxxx.

QEMU tries to implement this by not treating the instruction
specially but then catching the attempt to execute from the magic
address value.  This is not ideal, because:
 * there are guest visible differences from the architecturally
   specified behaviour (for instance jumping to 0xFFxxxxxx via a
   different instruction should not cause an exception return but it
   will in the QEMU implementation)
 * we have to account for it in various places (like refusing to take
   an interrupt if the PC is at a magic value, and making sure that
   the MPU doesn't deny execution at the magic value addresses)

Drop these hacks, and instead implement exception return the way the
architecture specifies -- by having the relevant instructions check
for the magic value and raise the 'do an exception return' QEMU
internal exception immediately.

The effect on the generated code is minor:

 bx lr, old code (and new code for Thread mode):
  TCG:
   mov_i32 tmp5,r14
   movi_i32 tmp6,$0xfffffffffffffffe
   and_i32 pc,tmp5,tmp6
   movi_i32 tmp6,$0x1
   and_i32 tmp5,tmp5,tmp6
   st_i32 tmp5,env,$0x218
   exit_tb $0x0
   set_label $L0
   exit_tb $0x7f2aabd61993
  x86_64 generated code:
   0x7f2aabe87019:  mov    %ebx,%ebp
   0x7f2aabe8701b:  and    $0xfffffffffffffffe,%ebp
   0x7f2aabe8701e:  mov    %ebp,0x3c(%r14)
   0x7f2aabe87022:  and    $0x1,%ebx
   0x7f2aabe87025:  mov    %ebx,0x218(%r14)
   0x7f2aabe8702c:  xor    %eax,%eax
   0x7f2aabe8702e:  jmpq   0x7f2aabe7c016

 bx lr, new code when in Handler mode:
  TCG:
   mov_i32 tmp5,r14
   movi_i32 tmp6,$0xfffffffffffffffe
   and_i32 pc,tmp5,tmp6
   movi_i32 tmp6,$0x1
   and_i32 tmp5,tmp5,tmp6
   st_i32 tmp5,env,$0x218
   movi_i32 tmp5,$0xffffffffff000000
   brcond_i32 pc,tmp5,geu,$L1
   exit_tb $0x0
   set_label $L1
   movi_i32 tmp5,$0x8
   call exception_internal,$0x0,$0,env,tmp5
  x86_64 generated code:
   0x7fe8fa1264e3:  mov    %ebp,%ebx
   0x7fe8fa1264e5:  and    $0xfffffffffffffffe,%ebx
   0x7fe8fa1264e8:  mov    %ebx,0x3c(%r14)
   0x7fe8fa1264ec:  and    $0x1,%ebp
   0x7fe8fa1264ef:  mov    %ebp,0x218(%r14)
   0x7fe8fa1264f6:  cmp    $0xff000000,%ebx
   0x7fe8fa1264fc:  jae    0x7fe8fa126509
   0x7fe8fa126502:  xor    %eax,%eax
   0x7fe8fa126504:  jmpq   0x7fe8fa122016
   0x7fe8fa126509:  mov    %r14,%rdi
   0x7fe8fa12650c:  mov    $0x8,%esi
   0x7fe8fa126511:  mov    $0x56095dbeccf5,%r10
   0x7fe8fa12651b:  callq  *%r10

which is a difference of one cmp/branch-not-taken. This will
be lost in the noise of having to exit generated code and
look up the next TB anyway.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-9-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 064c379c99 arm: Track M profile handler mode state in TB flags
For M profile exception-return handling we'd like to generate different
code for some instructions depending on whether we are in Handler
mode or Thread mode. This isn't the same as "are we privileged
or user", so we need an extra bit in the TB flags to distinguish.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-8-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell b636649f5a arm: Abstract out "are we singlestepping" test to utility function
We now test for "are we singlestepping" in several places and
it's not a trivial check because we need to care about both
architectural singlestep and QEMU gdbstub singlestep. We're
also about to add another place that needs to make this check,
so pull the condition out into a function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-7-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell f021b2c462 arm: Move condition-failed codepath generation out of if()
Move the code to generate the "condition failed" instruction
codepath out of the if (singlestepping) {} else {}. This
will allow adding support for handling a new is_jmp type
which can't be neatly split into "singlestepping case"
versus "not singlestepping case".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-6-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 4d5e8c969a arm: Move gen_set_condexec() and gen_set_pc_im() up in the file
Move the utility routines gen_set_condexec() and gen_set_pc_im()
up in the file, as we will want to use them from a function
placed earlier in the file than their current location.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-5-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 5425415ebb arm: Factor out "generate right kind of step exception"
We currently have two places that do:
            if (dc->ss_active) {
                gen_step_complete_exception(dc);
            } else {
                gen_exception_internal(EXCP_DEBUG);
            }

Factor this out into its own function, as we're about to add
a third place that needs the same logic.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-4-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell bedb8a6b09 arm: Thumb shift operations should not permit interworking branches
In Thumb mode, the only instructions which can cause an interworking
branch by writing the PC are BLX, BX, BXJ, LDR, POP and LDM. Unlike
ARM mode, data processing instructions which target the PC do not
cause interworking branches.

When we added support for doing interworking branches on writes to
PC from data processing instructions in commit 21aeb3430c, we
accidentally changed a Thumb instruction to have interworking
branch behaviour for writes to PC. (MOV, MOVS register-shifted
register, encoding T2; this is the standard encoding for
LSL/LSR/ASR/ROR (register).)

For this encoding, behaviour with Rd == R15 is specified as
UNPREDICTABLE, so allowing an interworking branch is within
spec, but it's confusing and differs from our handling of this
class of UNPREDICTABLE for other Thumb ALU operations. Make
it perform a simple (non-interworking) branch like the others.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491844419-12485-3-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 9d7c59c84d arm: Don't implement BXJ on M-profile CPUs
For M-profile CPUs, the BXJ instruction does not exist at all, and
the encoding should always UNDEF. We were accidentally implementing
it to behave like A-profile BXJ; correct the error.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1491844419-12485-2-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Ishani Chugh dffc58519e arm/kvm: Remove trailing newlines from error_report()
Signed-off-by: Ishani Chugh <chugh.ishani@research.iiit.ac.in>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1491629987-6826-1-git-send-email-chugh.ishani@research.iiit.ac.in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-20 17:39:17 +01:00
Peter Maydell 65ed2ed90d target/arm: Add assertion about FSC format for syndrome registers
In tlb_fill() we construct a syndrome register value from a
fault status register value which is filled in by arm_tlb_fill().
arm_tlb_fill() returns FSR values which might be in the format
used with short-format page descriptors, or the format used
with long-format (LPAE) descriptors. The syndrome register
always uses LPAE-format FSR status codes.

It isn't actually possible to end up delivering a syndrome
register value to the guest for a fault which is reported
with a short-format FSR (that kind of stage 1 fault will only
happen for an AArch32 translation regime which doesn't have
a syndrome register, and can never be redirected to an AArch64
or Hyp exception level). Add an assertion which checks this,
and adjust the code so that we construct a syndrome with
an invalid status code, rather than allowing set bits in
the FSR input to randomly corrupt other fields in the syndrome.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1491486152-24304-1-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 2c4a7cc5af arm: Move excnames[] array into arm_log_exceptions()
The excnames[] array is defined in internals.h because we used
to use it from two different source files for handling logging
of AArch32 and AArch64 exception entry. Refactoring means that
it's now used only in arm_log_exception() in helper.c, so move
the array into that function.

Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1491821097-5647-1-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell 32b81e620e target/arm: Add missing entries to excnames[] for log strings
Recent changes have added new EXCP_ values to ARM but forgot
to update the excnames[] array which is used to provide
human-readable strings when printing information about the
exception for debug logging. Add the missing entries, and
add a comment to the list of #defines to help avoid the mistake
being repeated in future.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1491486340-25988-1-git-send-email-peter.maydell@linaro.org
2017-04-20 17:39:17 +01:00
Peter Maydell b28b3377d7 arm: Fix APSR writes via M profile MSR
Our implementation of writes to the APSR for M-profile via the MSR
instruction was badly broken.

First and worst, we had the sense wrong on the test of bit 2 of the
SYSm field -- this is supposed to request an APSR write if bit 2 is 0
but we were doing it if bit 2 was 1.  This bug was introduced in
commit 58117c9bb4, so hasn't been in a QEMU release.

Secondly, the choice of exactly which parts of APSR should be written
is defined by bits in the 'mask' field.  We were not passing these
through from instruction decode, making it impossible to check them
in the helper.

Pass the mask bits through from the instruction decode to the helper
function and process them appropriately; fix the wrong sense of the
SYSm bit 2 check.

Invalid mask values and invalid combinations of mask and register
number are UNPREDICTABLE; we choose to treat them as if the mask
values were valid.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1487616072-9226-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-03-20 12:41:44 +00:00
Peter Maydell 3d54026fb0 arm: Enforce should-be-1 bits in MRS decoding
The MRS instruction requires that bits [19..16] are all 1s, and for
A/R profile also that bits [7..0] are all 0s.  At this point in the
decode tree we have checked all of the rest of the instruction but
were allowing these to be any value.  If these bits are not set then
the result is architecturally UNPREDICTABLE, but choosing to UNDEF is
more helpful to the user and avoids unexpected odd behaviour if the
encodings are used for some purpose in future architecture versions.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487616072-9226-4-git-send-email-peter.maydell@linaro.org
2017-03-20 12:41:44 +00:00
Peter Maydell 43ac657423 arm: Don't decode MRS(banked) or MSR(banked) for M profile
M profile doesn't have the MSR(banked) and MRS(banked) instructions
and uses the encodings for different kinds of M-profile MRS/MSR.
Guard the relevant bits of the decode logic to make sure we don't
accidentally fall into them by accident on M-profile.

(The bit being checked for this (bit 5) is part of the SYSm field on
M-profile, but since no currently allocated system registers have
encodings with bit 5 of SYSm set, this hasn't been a problem in
practice.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487616072-9226-3-git-send-email-peter.maydell@linaro.org
2017-03-20 12:41:44 +00:00
Peter Maydell 001b3cab51 arm: HVC and SMC encodings don't exist for M profile
M profile doesn't have the HVC or SMC encodings, so make them always
UNDEF rather than generating calls to helper functions that assume
A/R profile.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487616072-9226-2-git-send-email-peter.maydell@linaro.org
2017-03-20 12:41:44 +00:00
Andrew Jones d5affb0d86 target/arm/arm-powerctl: Fix psci info return values
The power state spec section 5.1.5 AFFINITY_INFO defines the
affinity info return values as

  0 ON
  1 OFF
  2 ON_PENDING

I grepped QEMU for power_state to ensure that no assumptions
of OFF=0 were being made.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20170303123232.4967-1-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-14 11:28:54 +00:00
Andrew Baumann 6ecd0b6ba0 target/arm: implement armv8 PMUSERENR (user-mode enable bits)
In armv8, this register implements more than a single bit, with
fine-grained enables for read access to event counters, cycles
counters, and write access to the software increment. This change
implements those checks using custom access functions for the relevant
registers.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 20170228215801.10472-2-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: move a couple of access functions to be only compiled
 ifndef CONFIG_USER_ONLY to avoid compiler warnings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-14 11:28:54 +00:00
Alex Bennée 6568da459b target/arm/helper: make it clear the EC field is also in hex
..just like the rest of the displayed ESR register. Otherwise people
might scratch their heads if a not obviously hex number is displayed
for the EC field.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-03-09 10:41:48 +00:00
Paolo Bonzini 2ae41db262 KVM: do not use sigtimedwait to catch SIGBUS
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread.
Information for the SIGBUS can be stored in thread-local variables
and processed later in kvm_cpu_exec.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Paolo Bonzini 4d39892cca KVM: remove kvm_arch_on_sigbus
Build it on kvm_arch_on_sigbus_vcpu instead.  They do the same
for "action optional" SIGBUSes, and the main thread should never get
"action required" SIGBUSes because it blocks the signal.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03 16:40:02 +01:00
Vijaya Kumar K d3a3e52962 target-arm: Add GICv3CPUState in CPUARMState struct
Add gicv3state void pointer to CPUARMState struct
to store GICv3CPUState.

In case of usecase like CPU reset, we need to reset
GICv3CPUState of the CPU. In such scenario, this pointer
becomes handy.

Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487850673-26455-5-git-send-email-vijay.kilari@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 17:10:00 +00:00
Peter Maydell e13886e3a7 armv7m: Raise correct kind of UsageFault for attempts to execute ARM code
M profile doesn't implement ARM, and the architecturally required
behaviour for attempts to execute with the Thumb bit clear is to
generate a UsageFault with the CFSR INVSTATE bit set.  We were
incorrectly implementing this as generating an UNDEFINSTR UsageFault;
fix this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:19 +00:00
Peter Maydell aa488fe3bb armv7m: Check exception return consistency
Implement the exception return consistency checks
described in the v7M pseudocode ExceptionReturn().

Inspired by a patch from Michael Davidsaver's series, but
this is a reimplementation from scratch based on the
ARM ARM pseudocode.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:19 +00:00
Peter Maydell 39ae2474e3 armv7m: Extract "exception taken" code into functions
Extract the code from the tail end of arm_v7m_do_interrupt() which
enters the exception handler into a pair of utility functions
v7m_exception_taken() and v7m_push_stack(), which correspond roughly
to the pseudocode PushStack() and ExceptionTaken().

This also requires us to move the arm_v7m_load_vector() utility
routine up so we can call it.

Handling illegal exception returns has some cases where we want to
take a UsageFault either on an existing stack frame or with a new
stack frame but with a specific LR value, so we want to be able to
call these without having to go via arm_v7m_cpu_do_interrupt().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Michael Davidsaver a25dc805e2 armv7m: Simpler and faster exception start
All the places in armv7m_cpu_do_interrupt() which pend an
exception in the NVIC are doing so for synchronous
exceptions. We know that we will always take some
exception in this case, so we can just acknowledge it
immediately, rather than returning and then immediately
being called again because the NVIC has raised its outbound
IRQ line.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: tweaked commit message; added DEBUG to the set of
exceptions we handle immediately, since it is synchronous
when it results from the BKPT instruction]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Peter Maydell a5d8235545 armv7m: Remove unused armv7m_nvic_acknowledge_irq() return value
Having armv7m_nvic_acknowledge_irq() return the new value of
env->v7m.exception and its one caller assign the return value
back to env->v7m.exception is pointless. Just make the return
type void instead.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:18 +00:00
Michael Davidsaver a73c98e159 armv7m: Escalate exceptions to HardFault if necessary
The v7M exception architecture requires that if a synchronous
exception cannot be taken immediately (because it is disabled
or at too low a priority) then it should be escalated to
HardFault (and the HardFault exception is then taken).
Implement this escalation logic.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
[PMM: extracted from another patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:17 +00:00
Peter Maydell 7ecdaa4a96 armv7m: Fix condition check for taking exceptions
The M profile condition for when we can take a pending exception or
interrupt is not the same as that for A/R profile.  The code
originally copied from the A/R profile version of the
cpu_exec_interrupt function only worked by chance for the
very simple case of exceptions being masked by PRIMASK.
Replace it with a call to a function in the NVIC code that
correctly compares the priority of the pending exception
against the current execution priority of the CPU.

[Michael Davidsaver's patchset had a patch to do something
similar but the implementation ended up being a rewrite.]

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2017-02-28 12:08:17 +00:00
Nick Reilly a4f5c5b723 Add missing fp_access_check() to aarch64 crypto instructions
The aarch64 crypto instructions for AES and SHA are missing the
check for if the FPU is enabled.

Signed-off-by: Nick Reilly <nreilly@blackberry.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28 12:08:15 +00:00
Alex Bennée ca759f9e38 tcg: enable MTTCG by default for ARM on x86 hosts
This enables the multi-threaded system emulation by default for ARMv7
and ARMv8 guests using the x86_64 TCG backend. This is because on the
guest side:

  - The ARM translate.c/translate-64.c have been converted to
    - use MTTCG safe atomic primitives
    - emit the appropriate barrier ops
  - The ARM machine has been updated to
    - hold the BQL when modifying shared cross-vCPU state
    - defer powerctl changes to async safe work

All the host backends support the barrier and atomic primitives but
need to provide same-or-better support for normal load/store
operations.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2017-02-24 10:32:46 +00:00
Alex Bennée a67cf27727 target-arm: ensure all cross vCPUs TLB flushes complete
Previously flushes on other vCPUs would only get serviced when they
exited their TranslationBlocks. While this isn't overly problematic it
violates the semantics of TLB flush from the point of view of source
vCPU.

To solve this we call the cputlb *_all_cpus_synced() functions to do
the flushes which ensures all flushes are completed by the time the
vCPU next schedules its own work. As the TLB instructions are modelled
as CP writes the TB ends at this point meaning cpu->exit_request will
be checked before the next instruction is executed.

Deferring the work until the architectural sync point is a possible
future optimisation.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée c22edfebff target-arm: don't generate WFE/YIELD calls for MTTCG
The WFE and YIELD instructions are really only hints and in TCG's case
they were useful to move the scheduling on from one vCPU to the next. In
the parallel context (MTTCG) this just causes an unnecessary cpu_exit
and contention of the BQL.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée 062ba099e0 target-arm/powerctl: defer cpu reset work to CPU context
When switching a new vCPU on we want to complete a bunch of the setup
work before we start scheduling the vCPU thread. To do this cleanly we
defer vCPU setup to async work which will run the vCPUs execution
context as the thread is woken up. The scheduling of the work will kick
the vCPU awake.

This avoids potential races in MTTCG system emulation.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Alex Bennée 0336cbf853 cputlb and arm/sparc targets: convert mmuidx flushes from varg to bitmap
While the vargs approach was flexible the original MTTCG ended up
having munge the bits to a bitmap so the data could be used in
deferred work helpers. Instead of hiding that in cputlb we push the
change to the API to make it take a bitmap of MMU indexes instead.

For ARM some the resulting flushes end up being quite long so to aid
readability I've tended to move the index shifting to a new line so
all the bits being or-ed together line up nicely, for example:

    tlb_flush_page_by_mmuidx(other_cs, pageaddr,
                             (1 << ARMMMUIdx_S1SE1) |
                             (1 << ARMMMUIdx_S1SE0));

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AT: SPARC parts only]
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[PM: ARM parts only]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:46 +00:00
Jan Kiszka 8d04fb55de tcg: drop global lock during TCG code execution
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.

We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.

Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:

20338 jan       20   0  331m  75m 6904 R   99  0.9   0:50.95 qemu-system-arm
20337 jan       20   0  331m  75m 6904 S   20  0.9   0:26.50 qemu-system-arm

The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond

32206 jan       20   0  330m  73m 7036 R   82  0.9   1:06.00 qemu-system-arm
32204 jan       20   0  330m  73m 7036 S   21  0.9   0:17.03 qemu-system-arm

We don't benefit significantly, though, when the guest is not fully
loading a host CPU.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24 10:32:45 +00:00
Wei Huang d6f02ce3b8 target-arm: Enable vPMU support under TCG mode
This patch contains several fixes to enable vPMU under TCG mode. It
first removes the checking of kvm_enabled() while unsetting
ARM_FEATURE_PMU. With it, the .pmu option can be used to turn on/off vPMU
under TCG mode. Secondly the PMU node of DT table is now created under TCG.
The last fix is to disable the masking of PMUver field of ID_AA64DFR0_EL1.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-5-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang e6ec54571e target-arm: Add support for PMU register PMINTENSET_EL1
This patch adds access support for PMINTENSET_EL1.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1486504171-26807-4-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang fdb8665672 target-arm: Add support for AArch64 PMU register PMXEVTYPER_EL0
In order to support Linux perf, which uses PMXEVTYPER register,
this patch adds read/write access support for PMXEVTYPER. The access
is CONSTRAINED UNPREDICTABLE when PMSELR is not 0x1f. Additionally
this patch adds support for PMXEVTYPER_EL0.

Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1486504171-26807-3-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Wei Huang 6b0407805d target-arm: Add support for PMU register PMSELR_EL0
This patch adds support for AArch64 register PMSELR_EL0. The existing
PMSELR definition is revised accordingly.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Moved #ifndef CONFIG_USER_ONLY to cover new regdefs]
Message-id: 1486504171-26807-2-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:28 +00:00
Peter Maydell 9bb6558a21 target/arm: A32, T32: Create Instruction Syndromes for Data Aborts
Add support for generating the ISS (Instruction Specific Syndrome)
for Data Abort exceptions taken from AArch32. These syndromes are
used by hypervisors for example to trap and emulate memory accesses.

This is the equivalent for AArch32 guests of the work done for AArch64
guests in commit aaa1f954d4.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-02-07 18:30:00 +00:00
Peter Maydell 63f26fcfda target/arm: Abstract out pbit/wbit tests in ARM ldr/str decode
In the ARM ldr/str decode path, rather than directly testing
"insn & (1 << 21)" and "insn & (1 << 24)", abstract these
bits out into wbit and pbit local flags. (We will want to
do more tests against them to determine whether we need to
provide syndrome information.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-02-07 18:29:59 +00:00
Julian Brown 4061200059 arm: Correctly handle watchpoints for BE32 CPUs
In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers.  This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.

This version of the patch augments and tidies up comments a little.

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Julian Brown f7478a92dd Fix Thumb-1 BE32 execution and disassembly.
Thumb-1 code has some issues in BE32 mode (as currently implemented). In
short, since bytes are swapped within words at load time for BE32
executables, this also swaps pairs of adjacent Thumb-1 instructions.

This patch un-swaps those pairs of instructions again, both for execution,
and for disassembly. (The previous version of the patch always read four
bytes in arm_read_memory_func and then extracted the proper two bytes,
in a probably misguided attempt to match the behaviour of actual hardware
as described by e.g. the ARM9TDMI TRM, section 3.3 "Endian effects for
instruction fetches". It's less complicated to just read the correct
two bytes though.)

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: ca20462a044848000370318a8bd41dd0a4ed273f.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Julian Brown 3a062d5730 target/arm: Add cfgend parameter for ARM CPU selection.
Add a new "cfgend" property which selects whether the CPU resets into
big-endian mode or not.  This setting affects whether we reset with
SCTLR_B (ARMv6 and earlier) or SCTLR_EE (ARMv7 and later) set.

Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: 11420d1c49636c1790e60578ee996e51f0f0b835.1484929304.git.julian@codesourcery.com
[PMM: use error_report_err() rather than error_report();
 move the integratorcp changes to their own patch;
 drop an unnecessary extra #include;
 rephrase commit message accordingly;
 move setting of reset_sctlr above registration of cpregs
 so it actually has an effect]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 18:29:59 +00:00
Michael S. Tsirkin 1b28762a33 arm: add trailing ; after MISMATCH_CHECK
Macro calls without a trailing ; look weird in C, this works as a side
effect of how QEMU_BUILD_BUG_ON is implemented. Fix this up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01 03:37:18 +02:00
Michael S. Tsirkin 705ae59fec arm: better stub version for MISMATCH_CHECK
stub version of MISMATCH_CHECK is empty so it's easy to misuse for
people not building kvm on arm.  Use QEMU_BUILD_BUG_ON similar to the
non-stub version to make it easier to catch bugs.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-01 03:37:18 +02:00
Peter Maydell 056f43df91 armv7m: R14 should reset to 0xffffffff
For M profile (unlike A profile) the reset value of R14 is specified
as 0xffffffff.  (The rationale is that this is an illegal exception
return value, so if guest code tries to return to it it will result
in a helpful exception.)

Registers r0 to r12 and the flags are architecturally UNKNOWN on
reset, so we leave those at zero.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-11-git-send-email-peter.maydell@linaro.org
2017-01-27 15:29:08 +00:00
Michael Davidsaver dc7abe4d65 armv7m: FAULTMASK should be 0 on reset
For M profile CPUs, FAULTMASK should be 0 on reset, like PRIMASK.
QEMU stores FAULTMASK in the PSTATE F bit, so (as with PRIMASK in the
I bit) we have to clear these to undo the A profile default of 1.

Update the comment accordingly and move it so that it's closer to the
code it's referring to.

Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1485285380-10565-10-git-send-email-peter.maydell@linaro.org
[PMM: rewrote commit message, moved comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27 15:29:08 +00:00