According to the NBD spec, a server that advertises
NBD_FLAG_CAN_MULTI_CONN promises that multiple client connections will
not see any cache inconsistencies: when properly separated by a single
flush, actions performed by one client will be visible to another
client, regardless of which client did the flush.
We always satisfy these conditions in qemu - even when we support
multiple clients, ALL clients go through a single point of reference
into the block layer, with no local caching. The effect of one client
is instantly visible to the next client. Even if our backend were a
network device, we argue that any multi-path caching effects that
would cause inconsistencies in back-to-back actions not seeing the
effect of previous actions would be a bug in that backend, and not the
fault of caching in qemu. As such, it is safe to unconditionally
advertise CAN_MULTI_CONN for any qemu NBD server situation that
supports parallel clients.
Note, however, that we don't want to advertise CAN_MULTI_CONN when we
know that a second client cannot connect (for historical reasons,
qemu-nbd defaults to a single connection while nbd-server-add and QMP
commands default to unlimited connections; but we already have
existing means to let either style of NBD server creation alter those
defaults). This is visible by no longer advertising MULTI_CONN for
'qemu-nbd -r' without -e, as in the iotest nbd-qemu-allocation.
The harder part of this patch is setting up an iotest to demonstrate
behavior of multiple NBD clients to a single server. It might be
possible with parallel qemu-io processes, but I found it easier to do
in python with the help of libnbd, and help from Nir and Vladimir in
writing the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Suggested-by: Nir Soffer <nsoffer@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220512004924.417153-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The next patch wants to adjust whether the NBD server code advertises
MULTI_CONN based on whether it is known if the server limits to
exactly one client. For a server started by QMP, this information is
obtained through nbd_server_start (which can support more than one
export); but for qemu-nbd (which supports exactly one export), it is
controlled only by the command-line option -e/--shared. Since we
already have a hook function used by qemu-nbd, it's easiest to just
alter its signature to fit our needs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220512004924.417153-2-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
The thread pool regulates itself: when idle, it kills threads until
empty, when in demand, it creates new threads until full. This behaviour
doesn't play well with latency sensitive workloads where the price of
creating a new thread is too high. For example, when paired with qemu's
'-mlock', or using safety features like SafeStack, creating a new thread
has been measured take multiple milliseconds.
In order to mitigate this let's introduce a new 'EventLoopBase'
property to set the thread pool size. The threads will be created during
the pool's initialization or upon updating the property's value, remain
available during its lifetime regardless of demand, and destroyed upon
freeing it. A properly characterized workload will then be able to
configure the pool to avoid any latency spikes.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20220425075723.20019-4-nsaenzju@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This function is safe to call in an I/O context, and qcow2_do_open()
does so (invoked in an I/O context by qcow2_co_invalidate_cache()).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-2-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename the type to be reused. Old name is "what is it for". To be
natively reused for other needs, let's name it exactly "what is it".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-2-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move them where they belong, since the functions are implemented in block-qdict.c.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-25-marcandre.lureau@redhat.com>
In
commit a71d597b98
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Thu Jun 10 13:08:00 2021 +0300
block/nbd: reuse nbd_co_do_establish_connection() in nbd_open()
the use of the 'hostname' field from the BDRVNBDState struct was
lost, and 'nbd_connect' just hardcoded it to match the IP socket
address. This was a harmless bug at the time since we block use
with anything other than IP sockets.
Shortly though, we want to allow the caller to override the hostname
used in the TLS certificate checks. This is to allow for TLS
when doing port forwarding or tunneling. Thus we need to reinstate
the passing along of the 'hostname'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-3-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The new block driver simply utilizes snapshot-access API of underlying
block node.
In further patches we want to use it like this:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
This way, NBD client will be able to read snapshotted state of active
disk, when active disk is continued to be written by guest. This is
known as "fleecing", and currently uses another scheme based on qcow2
temporary image which backing file is active-disk. New scheme comes
with benefits - see next commit.
The other possible application is exporting internal snapshots of
qcow2, like this:
[guest] [NBD export]
| |
| root | root
v file v
[qcow2]<---------[snapshot-access]
For this, we'll need to implement snapshot-access API handlers in
qcow2 driver, and improve snapshot-access block driver (and API) to
make it possible to select snapshot by name. Another thing to improve
is size of snapshot. Now for simplicity we just use size of bs->file,
which is OK for backup, but for qcow2 snapshots export we'll need to
imporve snapshot-access API to get size of snapshot.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-12-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.
In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add function to wait for all intersecting requests.
To be used in the further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a convenient function similar with bdrv_block_status() to get
status of dirty bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split intersecting-requests functionality out of block-copy to be
reused in copy-before-write filter.
Note: while being here, fix tiny typo in MAINTAINERS.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split block_copy_reset() out of block_copy_reset_unallocated() to be
used separately later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This will be used in the following commit to bring "incremental" mode
to copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
That simplifies handling failure in existing code and in further new
usage of bdrv_merge_dirty_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.
So, we have to fix preallocate filter to do only aligned preallocate
requests.
Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-28-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similar to the header split, also the function pointers in BlockDriver
can be split in I/O and global state.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-26-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Snapshots run also under the BQL, so they all are
in the global state API. The aiocontext lock that they hold
is currently an overkill and in future could be removed.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-23-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockjob functions run always under the BQL lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-19-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the I/O functions are not many, keep a single file.
Also split the function pointers in BlockJobDriver.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220303151616.325444-16-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to be sure that the functions that write the child and
parent list of a bs are under BQL and drain.
BQL prevents from concurrent writings from the GS API, while
drains protect from I/O.
TODO: drains are missing in some functions using this assert.
Therefore a proper assertion will fail. Because adding drains
requires additional discussions, they will be added in future
series.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-15-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-14-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similarly to the previous patch, split block_int.h
in block_int-io.h and block_int-global-state.h
block_int-common.h contains the structures shared between
the two headers, and the functions that can't be categorized as
I/O or global state.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-12-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-6-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block.h currently contains a mix of functions:
some of them run under the BQL and modify the block layer graph,
others are instead thread-safe and perform I/O in iothreads.
Some others can only be called by either the main loop or the
iothread running the AioContext (and not other iothreads),
and using them in another thread would cause deadlocks, and therefore
it is not ideal to define them as I/O.
It is not easy to understand which function is part of which
group (I/O vs GS vs "I/O or GS"), and this patch aims to clarify it.
The "GS" functions need the BQL, and often use
aio_context_acquire/release and/or drain to be sure they
can modify the graph safely.
The I/O function are instead thread safe, and can run in
any AioContext.
"I/O or GS" functions run instead in the main loop or in
a single iothread, and use BDRV_POLL_WHILE().
By splitting the header in two files, block-io.h
and block-global-state.h we have a clearer view on what
needs what kind of protection. block-common.h
contains common structures shared by both headers.
block.h is left there for legacy and to avoid changing
all includes in all c files that use the block APIs.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the bdrv_activate renaming, change also the name
of the respective callers.
bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is currently just a wrapper for bdrv_invalidate_cache(),
but in future will contain the code of bdrv_co_invalidate_cache() that
has to always be protected by BQL, and leave the rest in the I/O
coroutine.
Replace all bdrv_invalidate_cache() invokations with bdrv_activate().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the permission API calls into driver-specific callbacks
that always run under BQL. In this case, bdrv_crypto_luks
needs to perform permission checks before and after
qcrypto_block_amend_options(). The problem is that the caller,
block_crypto_amend_options_generic_luks(), can also run in I/O
from .bdrv_co_amend(). This does not comply with Global State-I/O API split,
as permissions API must always run under BQL.
Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean()
callbacks. These two callbacks are guaranteed to be invoked under
BQL, respectively before and after .bdrv_co_amend().
They take care of performing the permission checks
in the same way as they are currently done before and after
qcrypto_block_amend_options().
These callbacks are in preparation for next patch, where we
delete the original permission check. Right now they just add redundant
control.
Then, call .bdrv_amend_pre_run() before job_start in
qmp_x_blockdev_amend(), so that it will be run before the job coroutine
is created and stay in the main loop.
As a cleanup, use JobDriver's .clean() callback to call
.bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL.
After this patch, permission failures occur early in the blockdev-amend
job to update a LUKS volume's keys. iotest 296 must now expect them in
x-blockdev-amend's QMP reply instead of waiting for the actual job to
fail later.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-6-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds support for one possible new protection information format
introduced in TP4068 (and integrated in NVMe 2.0): the 64-bit CRC guard
and 48-bit reference tag. This version does not support storage tags.
Like the CRC16 support already present, this uses a software
implementation of CRC64 (so it is naturally pretty slow). But its good
enough for verification purposes.
This may go nicely hand-in-hand with the support that Keith submitted
for the Linux kernel[1].
[1]: https://lore.kernel.org/linux-nvme/20220126165214.GA1782352@dhcp-10-100-145-180.wdc.com/T/
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for up to 64 LBA formats through the LBAFEE field of the
Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for getting and setting the Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for TP 4076 ("Zoned Random Write Area"), v2021.08.23
("Ratified").
This adds three new namespace parameters: "zoned.numzrwa" (number of
zrwa resources, i.e. number of zones that can have a zrwa),
"zoned.zrwas" (zrwa size in LBAs), "zoned.zrwafg" (granularity in LBAs
for flushes).
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add struct for Zone Management Send in preparation for more zone send
flags.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The comment "disk I/O throttling" doesn't make any sense at all
any more. It was added in commit 0563e19151 to describe
bdrv_io_limits_enable()/disable(), which were removed in commit
97148076, so the comment is just a forgotten leftover.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220131125615.74612-1-eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
First, this permission never protected a node from being changed, as
generic child-replacing functions don't check it.
Second, it's a strange thing: it presents a permission of parent node
to change its child. But generally, children are replaced by different
mechanisms, like jobs or qmp commands, not by nodes.
Graph-mod permission is hard to understand. All other permissions
describe operations which done by parent node on its child: read,
write, resize. Graph modification operations are something completely
different.
The only place where BLK_PERM_GRAPH_MOD is used as "perm" (not shared
perm) is mirror_start_job, for s->target. Still modern code should use
bdrv_freeze_backing_chain() to protect from graph modification, if we
don't do it somewhere it may be considered as a bug. So, it's a bit
risky to drop GRAPH_MOD, and analyzing of possible loss of protection
is hard. But one day we should do it, let's do it now.
One more bit of information is that locking the corresponding byte in
file-posix doesn't make sense at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902093754.2352-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_backing_overridden is only used in block.c, so there is
no need to leave it in block_int.h
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211215121140.456939-2-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adaptive polling measures the execution time of the polling check plus
handlers called when a polled event becomes ready. Handlers can take a
significant amount of time, making it look like polling was running for
a long time when in fact the event handler was running for a long time.
For example, on Linux the io_submit(2) syscall invoked when a virtio-blk
device's virtqueue becomes ready can take 10s of microseconds. This
can exceed the default polling interval (32 microseconds) and cause
adaptive polling to stop polling.
By excluding the handler's execution time from the polling check we make
the adaptive polling calculation more accurate. As a result, the event
loop now stays in polling mode where previously it would have fallen
back to file descriptor monitoring.
The following data was collected with virtio-blk num-queues=2
event_idx=off using an IOThread. Before:
168k IOPS, IOThread syscalls:
9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16
9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8
9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8
9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3
9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32
174k IOPS (+3.6%), IOThread syscalls:
9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32
9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8
9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8
9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32
Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because
the IOThread stays in polling mode instead of falling back to file
descriptor monitoring.
As usual, polling is not implemented on Windows so this patch ignores
the new io_poll_read() callback in aio-win32.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-2-stefanha@redhat.com
[Fixed up aio_set_event_notifier() calls in
tests/unit/test-fdmon-epoll.c added after this series was queued.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It's unused now (except for permission handling)[*]. The only reasonable
user of it was block-stream job, recently updated to use own blk. And
other block jobs prefer to use own source node related objects.
So, the arguments of dropping the field are:
- block jobs prefer not to use it
- block jobs usually has more then one node to operate on, and better
to operate symmetrically (for example has both source and target
blk's in specific block-job state structure)
*: BlockJob.blk is used to keep some permissions. We simply move
permissions to block-job child created in block_job_create() together
with blk.
In mirror, we just should not care anymore about restoring state of
blk. Most probably this code could be dropped long ago, after dropping
bs->job pointer. Now it finally goes away together with BlockJob.blk
itself.
iotest 141 output is updated, as "bdrv_has_blk(bs)" check in
qmp_blockdev_del() doesn't fail (we don't have blk now). Still, new
error message looks even better.
In iotest 283 we need to add a job id, otherwise "Invalid job ID"
happens now earlier than permission check (as permissions moved from
blk to block-job node).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
We are going to drop BlockJob.blk. So let's retrieve block job context
from underlying job instead of main node.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Between the submission of a request and the unplug, other devices
with larger limits may have been queued new requests without flushing
the batch.
Using the new `dev_max_batch` parameter, laio_io_unplug() can check
if the batch exceeds the device limit to flush the current batch.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211026162346.253081-4-sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new parameter can be used by block devices to limit the
Linux AIO batch size more than the limit set by the AIO context.
file-posix backend supports this, passing its `aio-max-batch` option
previously added.
Add an helper function to calculate the maximum batch size.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211026162346.253081-3-sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add version of bdrv_new_open_driver() that supports QDict options.
We'll use it in further commit.
Simply add one more argument to bdrv_new_open_driver() is worse, as
there are too many invocations of bdrv_new_open_driver() to update
then.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210920115538.264372-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are a couple of errors in bdrv_drained_begin header comment:
- block_job_pause does not exist anymore, it has been replaced
with job_pause in b15de82867
- job_pause is automatically invoked as a .drained_begin callback
(child_job_drained_begin) by the child_job BdrvChildClass struct
in blockjob.c. So no additional pause should be required.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210903113800.59970-1-eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver discard handlers bytes parameter to int64_t.
The only caller of all updated function is bdrv_co_pdiscard in
block/io.c. It is already prepared to work with 64bit requests, but
pass at most max(bs->bl.max_pdiscard, INT_MAX) to the driver.
Let's look at all updated functions:
blkdebug: all calculations are still OK, thanks to
bdrv_check_qiov_request().
both rule_check and bdrv_co_pdiscard are 64bit
blklogwrites: pass to blk_loc_writes_co_log which is 64bit
blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pdiscard, OK
copy-before-write: pass to bdrv_co_pdiscard which is 64bit and to
cbw_do_copy_before_write which is 64bit
file-posix: one handler calls raw_account_discard() is 64bit and both
handlers calls raw_do_pdiscard(). Update raw_do_pdiscard, which pass
to RawPosixAIOData::aio_nbytes, which is 64bit (and calls
raw_account_discard())
gluster: somehow, third argument of glfs_discard_async is size_t.
Let's set max_pdiscard accordingly.
iscsi: iscsi_allocmap_set_invalid is 64bit,
!is_byte_request_lun_aligned is 64bit.
list.num is uint32_t. Let's clarify max_pdiscard and
pdiscard_alignment.
mirror_top: pass to bdrv_mirror_top_do_write() which is
64bit
nbd: protocol limitation. max_pdiscard is alredy set strict enough,
keep it as is for now.
nvme: buf.nlb is uint32_t and we do shift. So, add corresponding limits
to nvme_refresh_limits().
preallocate: pass to bdrv_co_pdiscard() which is 64bit.
rbd: pass to qemu_rbd_start_co() which is 64bit.
qcow2: calculations are still OK, thanks to bdrv_check_qiov_request(),
qcow2_cluster_discard() is 64bit.
raw-format: raw_adjust_offset() is 64bit, bdrv_co_pdiscard too.
throttle: pass to bdrv_co_pdiscard() which is 64bit and to
throttle_group_co_io_limits_intercept() which is 64bit as well.
test-block-iothread: bytes argument is unused
Great! Now all drivers are prepared to handle 64bit discard requests,
or else have explicit max_pdiscard limits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
