Call gen_pause for all "or rx,rx,rx" encodings other nop. This
provides a reasonable implementation for yield, and a better
approximation for mdoio, mdoom, and miso. The choice to pause for all
encodings !=0 leverages the PowerISA admonition that the reserved
encodings might change program priority, providing a slight "future
proofing".
Signed-off-by: Aaron Larson <alarson@ddci.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We were always advertising only 4K & 16M. Additionally the code wasn't
properly matching the page size with the PTE content, which meant we
could potentially hit an incorrect PTE if the guest used multiple sizes.
Finally, honor the CPU capabilities when decoding the size from the SLB
so we don't try to use 64K pages on 970.
This still doesn't add support for MPSS (Multiple Page Sizes per Segment)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors
commits 61a36c9b5a and 1114e712c9 reworked the hpte code
doing insertion/removal in hw/ppc/spapr_hcall.c. The hunks
modifying these areas were removed. ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
They are generally useful when debugging HV mode stuff
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Don't allow access in guest mode
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current behaviour isn't completely right, as for the DEC, we
don't properly re-arm when wrapping around, but I will fix this
in a separate patch.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The architecture specifies that any instruction that sets MSR:PR will also
set MSR:EE, IR and DR.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
External interrupts can bypass the MSR_EE test if they occur in guest
mode and LPES0 is clear. In that case they are directed to the hypervisor
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This handles filtering bits based on what is implemented by a
given architecture version. We also use it to copy to LPCR
some of the relevant 970 HID4 bits.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Includes all the bits up to ISA 2.07
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We don't give them a KVM reg number yet as no current KVM version
supports HV mode.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: SPRs AMOR,DAWR,DARWX were already included in commit f401dd32cb]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function needs to be converted to QOM hook and virtualised for
multi-arch. This rename interferes, as cpu-qom will not have access
to the renaming causing name divergence. This rename doesn't really do
anything anyway so just delete it.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <69bd25a8678b8b31b91cd9760c777bed1aafb44e.1437212383.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaitepeter@gmail.com>
This patch modifies SoftFloat library so that it can be configured in
run-time in relation to the meaning of signaling NaN bit, while, at the
same time, strictly preserving its behavior on all existing platforms.
Background:
In floating-point calculations, there is a need for denoting undefined or
unrepresentable values. This is achieved by defining certain floating-point
numerical values to be NaNs (which stands for "not a number"). For additional
reasons, virtually all modern floating-point unit implementations use two
kinds of NaNs: quiet and signaling. The binary representations of these two
kinds of NaNs, as a rule, differ only in one bit (that bit is, traditionally,
the first bit of mantissa).
Up to 2008, standards for floating-point did not specify all details about
binary representation of NaNs. More specifically, the meaning of the bit
that is used for distinguishing between signaling and quiet NaNs was not
strictly prescribed. (IEEE 754-2008 was the first floating-point standard
that defined that meaning clearly, see [1], p. 35) As a result, different
platforms took different approaches, and that presented considerable
challenge for multi-platform emulators like QEMU.
Mips platform represents the most complex case among QEMU-supported
platforms regarding signaling NaN bit. Up to the Release 6 of Mips
architecture, "1" in signaling NaN bit denoted signaling NaN, which is
opposite to IEEE 754-2008 standard. From Release 6 on, Mips architecture
adopted IEEE standard prescription, and "0" denotes signaling NaN. On top of
that, Mips architecture for SIMD (also known as MSA, or vector instructions)
also specifies signaling bit in accordance to IEEE standard. MSA unit can be
implemented with both pre-Release 6 and Release 6 main processor units.
QEMU uses SoftFloat library to implement various floating-point-related
instructions on all platforms. The current QEMU implementation allows for
defining meaning of signaling NaN bit during build time, and is implemented
via preprocessor macro called SNAN_BIT_IS_ONE.
On the other hand, the change in this patch enables SoftFloat library to be
configured in run-time. This configuration is meant to occur during CPU
initialization, at the moment when it is definitely known what desired
behavior for particular CPU (or any additional FPUs) is.
The change is implemented so that it is consistent with existing
implementation of similar cases. This means that structure float_status is
used for passing the information about desired signaling NaN bit on each
invocation of SoftFloat functions. The additional field in float_status is
called snan_bit_is_one, which supersedes macro SNAN_BIT_IS_ONE.
IMPORTANT:
This change is not meant to create any change in emulator behavior or
functionality on any platform. It just provides the means for SoftFloat
library to be used in a more flexible way - in other words, it will just
prepare SoftFloat library for usage related to Mips platform and its
specifics regarding signaling bit meaning, which is done in some of
subsequent patches from this series.
Further break down of changes:
1) Added field snan_bit_is_one to the structure float_status, and
correspondent setter function set_snan_bit_is_one().
2) Constants <float16|float32|float64|floatx80|float128>_default_nan
(used both internally and externally) converted to functions
<float16|float32|float64|floatx80|float128>_default_nan(float_status*).
This is necessary since they are dependent on signaling bit meaning.
At the same time, for the sake of code cleanup and simplicity, constants
<floatx80|float128>_default_nan_<low|high> (used only internally within
SoftFloat library) are removed, as not needed.
3) Added a float_status* argument to SoftFloat library functions
XXX_is_quiet_nan(XXX a_), XXX_is_signaling_nan(XXX a_),
XXX_maybe_silence_nan(XXX a_). This argument must be present in
order to enable correct invocation of new version of functions
XXX_default_nan(). (XXX is <float16|float32|float64|floatx80|float128>
here)
4) Updated code for all platforms to reflect changes in SoftFloat library.
This change is twofolds: it includes modifications of SoftFloat library
functions invocations, and an addition of invocation of function
set_snan_bit_is_one() during CPU initialization, with arguments that
are appropriate for each particular platform. It was established that
all platforms zero their main CPU data structures, so snan_bit_is_one(0)
in appropriate places is not added, as it is not needed.
[1] "IEEE Standard for Floating-Point Arithmetic",
IEEE Computer Society, August 29, 2008.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[leon.alrae@imgtec.com:
* cherry-picked 2 chunks from patch #2 to fix compilation warnings]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
On powerpc, we must only signal huge page support to the guest if
all memory areas are capable of supporting huge pages. The commit
2d103aae87 ("fix hugepage support when using memory-backend-file")
already fixed the case when the user specified the mem-path property
for NUMA memory nodes instead of using the global "-mem-path" option.
However, there is one more case where it currently can go wrong.
When specifying additional memory DIMMs without using NUMA, e.g.
qemu-system-ppc64 -enable-kvm ... -m 1G,slots=2,maxmem=2G \
-device pc-dimm,id=dimm-mem1,memdev=mem1 -object \
memory-backend-file,policy=default,mem-path=/...,size=1G,id=mem1
the code in getrampagesize() currently assumes that huge pages
are possible since they are enabled for the mem1 object. But
since the main RAM is not backed by a huge page filesystem,
the guest Linux kernel then crashes very quickly after being
started. So in case the we've got "normal" memory without NUMA
and without the global "-mem-path" option, we must not announce
huge pages to the guest. Since this is likely a mis-configuration
by the user, also spill out a message in this case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds the ISA 2.06 and later power management instructions
(doze, nap, sleep and rvwinkle) and associated wakeup cause testing
in LPCR
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There's no point inlining this, if you hit the exception case you exit
anyway, and not inlining saves about 100K of code size (and cache
footprint).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: removed '__attribute__((noinline))' from original patch ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Those instructions are only available in hypervisor real mode and
allow cache inhibited garded access to devices in that mode.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Recent server processors use the Hypervisor Emulation Assistance
interrupt for illegal instructions and *some* type of SPR accesses.
Also the code was always generating inval instructions even for priv
violations due to setting the wrong flags
Finally, the checking for PR/HV was open coded everywhere.
This reworks it all, using little helper macros for checking, and
adding the HV interrupt (which gets converted back to program check
in the slow path of excp_helper.c on CPUs that don't want it).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Under some circumstances, we need to direct ISI and DSI interrupts
at the hypervisor, turning them into HISI/HDSI, and using different
SPRs (HDSISR and HDAR) depending on the combination of MSR_DR and
the corresponding VPM bits in LPCR.
This moves part of the code into helpers that are fixed to select
the right exception type and registers. On pre-P7 processors, LPCR
is 0 which provides the old behaviour of directing the interrupts
at the supervisor.
Thanks to Andrei Warkentin for finding a bug when HV=1
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: Merged a fix on POWERPC_EXCP_HDSI fixing the condition on
msr_hv, from Andrei Warkentin <andrey.warkentin@gmail.com> ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We were initializing unused ones and missing some
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This properly implements LPES0 handling for HV vs. !HV mode and
removes the unsupported LPES1. This has been removed from the specs
since ISA v2.07.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: AIL implementation was fixed in commit 5c94b2a5e5. This patch
only contains the bits of the original patch related to LPES0
handling, adapted commit log.
fixed checkpatch.pl errors. ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows us to set the appropriate LPCR bits which will be used
when fixing the exception model for the HV mode.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: previous commit 26a7f1291b did not include the LPCR setting as
it was not needed at the time, adapted commit log ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reworks emulation of the various "rfi" variants. I removed
some masking bits that I couldn't make sense of, the only bit that
I am aware we should mask here is POW, the CPU's MSR mask should
take care of the rest.
This also fixes some problems when running 32-bit userspace under
a 64-bit kernel.
This patch broke 32bit OpenBIOS when run under a 970 cpu. A fix was
proposed here :
https://www.coreboot.org/pipermail/openbios/2016-June/009452.html
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: updated the commit log with the reference of the openbios fix ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Remove hunk which disabled rfi on 64-bit CPUS. The change was
correct, but we need to fix OpenBIOS before applying it]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 75x and 74xx processors have some thermal monitoring SPRs that
some OSes such as MacOS do use. Our current "dumb" implementation
isn't good enough and will cause some versions of MacOS to hang during
boot.
This lifts an improved emulation from MacOnLinux and adapts it to
qemu, thus fixing the problem.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Fixed typo in comment, a number of minor checkpatch warnings,
and a compile failure with CONFIG_USER_ONLY]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In 63ae0915f8, I arranged to use a 32-bit rotate, without
considering the effect of a mask value that wraps around to
the high bits of the word.
[dwg: In 2e11b15 this was partially fixed, but an edge case was still
incorrect, which this fixes]
Signed-off-by: Richard Henderson <rth@twiddle.net>
[dwg: Folded with a revert of 2e11b15, an earlier buggy version of
this patch which already went upstream]
Tested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
While trying to install a fedora container with
"lxc-create -t fedora -- -I qemu-ppc64" the installation abort with
the following error:
qemu: fatal: Unknown exception 0x65537. Aborting
NIP 0000004000927924 LR 00000040009e325c CTR 0000004000927480 XER 0000000000000000 CPU#0
MSR 9000000102806000 HID0 0000000000000000 HF 9000000002806000 iidx 3 didx 3
TB 00248932 1069155773327487
GPR00 00000040009e325c 00000040007ff800 0000004000aba098 0000000000000000
GPR04 00000040007ff878 0000004000dcb588 0000004000dcb830 0000004000a7a098
GPR08 0000000000000000 0000000000000000 00000040007ff878 0000004000927960
GPR12 0000000022022448 0000004000e2aef0 0000000000000000 0000000000000000
GPR16 0000000000000000 0000000000000000 0000000000000002 0000000000000001
GPR20 0000000000000000 0000000000000000 0000000000000000 0000004000800699
GPR24 0000004000e13320 0000000000000000 0000004000ac9ad8 0000004000ac9ae0
GPR28 0000000000000001 00000000100210a0 0000000000000000 0000000000000038
CR 22022442 [ E E - E E G G E ] RES ffffffffffffffff
FPR00 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR08 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR12 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPSCR 0000000000000000
/usr/share/lxc/templates/lxc-fedora: line 487: 26661 Aborted (core dumped) chroot . yum -y --nogpgcheck --installroot /run/install install python rpm yum
I've bisected until the commit:
commit b68e60e6f0
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue May 3 18:03:33 2016 +0200
ppc: Get out of emulation on SMT "OR" ops
Otherwise tight loops at smt_low for example, which OPAL does,
eat so much CPU that we can't boot a kernel anymore. With that,
I can boot 8 CPUs just fine with powernv.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can fix that by preventing to send EXCP_HLT in the case of linux-user mode,
as the main loop doesn't know how to manage it.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move all trace-events for files in the target-ppc/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1466066426-16657-39-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Information is tracked inside the TCGContext structure, and later used
by tracing events with the 'tcg' and 'vcpu' properties.
The 'cpu' field is used to check tracing of translation-time
events ("*_trans"). The 'tcg_env' field is used to pass it to
execution-time events ("*_exec").
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 146549350162.18437.3033661139638458143.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add sPAPR specific abastract CPU core device that is based on generic
CPU core device. Use this as base type to create sPAPR CPU specific core
devices.
TODO:
- Add core types for other remaining CPU types
- Handle CPU model alias correctly
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In 63ae0915f8, I arranged to use a 32-bit rotate, without
considering the effect of a mask value that wraps around to
the high bits of the word.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fixed bug in code generation for the PowerPC "wait" instruction. It
doesn't make sense to store a non-initialized register.
Signed-off-by: Jakub Horak <thement@ibawizard.net>
[dwg: revised commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that guests can use the PowerISA 2.07 CPU sPAPR
compatibility mode when they request it and the target CPU
supports it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using an olderr PowerISA level, all the upper compatibility
bits have to be enabled, too. For example when we want to run
something in PowerISA 2.05 compatibility mode on POWER8, the bit
for 2.06 has to be set beside the bit for 2.05.
Additionally, to make sure that we do not set bits that are not
supported by the host, we apply a mask with the known-to-be-good
bits here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Added some #ifs to fix compile on 32-bit targets]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running with KVM, we might be interested in some details
of the host CPU class, too, so provide a function to get the
corresponding CPU class.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current pcr_mask values are ambiguous: Should these be the mask
that defines valid bits in the PCR register? Or should these rather
indicate which compatibility levels are possible? Anyway, POWER6 and
POWER7 should certainly not use the same values here. So let's
introduce an additional variable "pcr_supported" here which is
used to indicate the valid compatibility levels, and use pcr_mask
to signal the valid bits in the PCR register.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This includes some infrastructure for ipmi smbios tables.
Beginning of acpi hotplug rework by Igor for supporting >255 CPUs.
Misc cleanups and fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXVsQ6AAoJECgfDbjSjVRp/7MH/i39kIjyUY0jrt/UDrNgXLoi
bi92ZdyyaeULg3rBFHlnweMs2VHChUATTc0DmXpr2hJbXm5MlZHQWHsv3UVpZ93h
ZVY99b5AF/2Im1MIfDmxImFU9YfHYQuAqW7ZNx+RtXpzuAvdd89K29y80iwlJ251
B1zhl9Tp8eePE3fZhbRElaTY70ruWonl+HOV9am7tfMDCTugYDPfLqdYT8fnaY98
GMbSkmRnOaRYeo23dsg2pX7DK+H3I4DO8qvis6Va4pRiwCCf9L0N2GAIrljpMdbk
yOCvvW3ujvCwkwwTwL1fPZTk1PTF3xhbgFZVvX2zOAWljhYkcesg4L8oERVBjwQ=
=sqxd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
This includes some infrastructure for ipmi smbios tables.
Beginning of acpi hotplug rework by Igor for supporting >255 CPUs.
Misc cleanups and fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 07 Jun 2016 13:55:22 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (25 commits)
virtio: move bi-endian target support to a single location
pc-dimm: introduce realize callback
pc-dimm: get memory region from ->get_memory_region()
acpi: make bios_linker_loader_add_checksum() API offset based
acpi: make bios_linker_loader_add_pointer() API offset based
tpm: apci: cleanup TCPA table initialization
acpi: cleanup bios_linker_loader_cleanup()
acpi: simplify bios_linker API by removing redundant 'table' argument
acpi: convert linker from GArray to BIOSLinker structure
pc: use AcpiDeviceIfClass.send_event to issue GPE events
acpi: extend ACPI interface to provide send_event hook
pc: Postpone SMBIOS table installation to post machine init
ipmi: rework the fwinfo to be fetched from the interface
tests: acpi: update tables with consolidated legacy cpu-hotplug AML
pc: acpi: cpuhp-legacy: switch ProcessorID to possible_cpus idx
pc: acpi: simplify build_legacy_cpu_hotplug_aml() signature
pc: acpi: consolidate legacy CPU hotplug in one file
pc: acpi: mark current CPU hotplug functions as legacy
pc: acpi: cpu-hotplug: make AML CPU_foo defines local to cpu_hotplug_acpi_table.c
pc: acpi: consolidate \GPE._E02 with the rest of CPU hotplug AML
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo's recent cpu.h cleanups broke legacy virtio for ppc64 LE guests (and
arm BE guests as well, even if I have not verified that). Especially, commit
"33c11879fd42 qemu-common: push cpu.h inclusion out of qemu-common.h" has
the side-effect of silently hiding the TARGET_IS_BIENDIAN macro from the
virtio memory accessors, and thus fully disabling support of endian changing
targets.
To be sure this cannot happen again, let's gather all the bi-endian bits
where they belong in include/hw/virtio/virtio-access.h.
The changes in hw/virtio/vhost.c are safe because vhost_needs_vring_endian()
is not called on a hot path and non bi-endian targets will return false
anyway.
While here, also rename TARGET_IS_BIENDIAN to be more precise: it is only for
legacy virtio and bi-endian guests.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The architecture specifies that mtspr/mfspr on an unknown SPR number
should act as a nop in privileged mode.
I haven't removed the warning however as it can be useful for
diagnosing.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Used to lookup SLB entries by address, for some reason it was missing.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since at least the 2.05 architecture, the slbia instruction takes an
IH field in the opcode to provide some control on the effect of the
slbia on the ERATs (level-1 TLB).
We can safely ignore it as we always flush the whole qemu TLB but
we should allow the bits in the decode.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We had code to handle the L bit in the opcode but we didn't
allow it in the decode mask.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PPC_64BX instruction flag is used for a couple of newer
instructions currently on POWER8 but our implementation for
them works for POWER7 too (and already does the proper checking
of what is permitted) with one exception: stq needs to check
the ISA version.
This fixes the latter and add the instructions to POWER7
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We only had them on POWER8, add them to POWER7 as well
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This ports the existing 64-bit mechanism to 32-bit, thus series
of 64 tlbie's followed by a sync like some versions of Darwin
(ab)use will result in a single flush.
We apply a pending flush on any sync instruction though, as Darwin
doesn't use tlbsync on non-SMP systems.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The processor only uses some bits of the address and invalidates an
entire congruence class. Some OSes such as Darwin and HelenOS take
advantage of this and occasionally invalidate the entire TLB by just
doing a series of 64 consecutive tlbie for example.
Our code tries to be too smart here only invalidating a segment
congruence class (ie, allowing more address bits to be relevant
in the invalidation), this fails miserably on those OSes.
Instead don't bother, do like ppc64 and blow the whole tlb when tlbie
is executed.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We used to always flush the TLB when changing relocation mode in
MSR:IR and MSR:DR (ie. MMU on/off for Instructions and Data).
We don't anymore since we have split mmu_idx for instruction and data.
However, since we hard code the mmu_idx in the translated code, we
now need to also make sure MSR:IR and MSR:DR are part of the hflags
used to tag translated code, so that we use different translated
code for different MMU settings.
Darwin gets hurt by this problem.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes compilation of mmu_helper.c when all of the debug #defines at
the start of the file are enabled.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit 74693da988 ('ppc: tlbie, tlbia and tlbisync are HV only')
introduced some extra checks on the instruction privilege. slbia was
changed wrongly and hrfid, tlbia were forgotten.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
