Commit Graph

59 Commits

Author SHA1 Message Date
Hyman Huang(黄勇) f3b2e38cfb softmmu/dirtylimit: Implement dirty page rate limit
Implement dirtyrate calculation periodically basing on
dirty-ring and throttle virtual CPU until it reachs the quota
dirty page rate given by user.

Introduce qmp commands "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit"
to enable, disable, query dirty page limit for virtual CPU.

Meanwhile, introduce corresponding hmp commands
"set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit",
"info vcpu_dirty_limit" so the feature can be more usable.

"query-vcpu-dirty-limit" success depends on enabling dirty
page rate limit, so just add it to the list of skipped
command to ensure qmp-cmd-test run successfully.

Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2022-07-20 12:15:08 +01:00
Paolo Bonzini 39cd0c7f12 hmp: add filtering of statistics by name
Allow the user to request only a specific subset of statistics.
This can be useful when working on a feature or optimization that is
known to affect that statistic.

Example:

   (qemu) info stats vcpu halt_poll_fail_ns
   provider: kvm
       halt_poll_fail_ns (cumulative, ns): 0

In case multiple providers have the same statistic, the provider can be
specified too:

   (qemu) info stats vcpu halt_poll_fail_ns kvm
   provider: kvm
       halt_poll_fail_ns (cumulative, ns): 0

Extracted from a patch by Mark Kanda.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-14 16:50:30 +02:00
Paolo Bonzini 7716417eac hmp: add filtering of statistics by provider
Allow the user to request statistics for a single provider of interest.
Extracted from a patch by Mark Kanda.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-14 16:50:30 +02:00
Mark Kanda 433815f5bd hmp: add basic "info stats" implementation
Add an HMP command to retrieve statistics collected at run-time.
The command will retrieve and print either all VM-level statistics,
or all vCPU-level statistics for the currently selected CPU.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-14 16:50:30 +02:00
Murilo Opsfelder Araujo c9f8004b6a mos6522: fix linking error when CONFIG_MOS6522 is not set
When CONFIG_MOS6522 is not set, building ppc64-softmmu target fails:

/usr/bin/ld: libqemu-ppc64-softmmu.fa.p/monitor_misc.c.o:(.data+0x1158): undefined reference to `hmp_info_via'

Make devices configuration available in hmp-commands*.hx and check for
CONFIG_MOS6522.

Fixes: 409e9f7131 (mos6522: add "info via" HMP command for debugging)
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220510235439.54775-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-05-26 17:11:32 -03:00
Mark Cave-Ayland 409e9f7131 mos6522: add "info via" HMP command for debugging
This displays detailed information about the device registers and timers to aid
debugging problems with timers and interrupts.

Currently the QAPI generators for HumanReadableText don't work correctly if
used in qapi/target-misc.json when a non-specified target is built, so for
now manually add a hmp_info_via() wrapper until direct support for per-device
HMP/QMP commands is implemented.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305150957.5053-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-09 09:28:28 +00:00
Alex Bennée 92e28c03d6 monitor: move x-query-profile into accel/tcg to fix build
As --enable-profiler isn't defended in CI we missed this breakage.
Move the qmp handler into accel/tcg so we have access to the helpers
we need. While we are at it ensure we gate the feature on CONFIG_TCG.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 37087fde0e ("qapi: introduce x-query-profile QMP command")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/773
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220105135009.1584676-23-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé 91f2fa7045 qapi: introduce x-query-irq QMP command
This is a counterpart to the HMP "info irq" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02 15:57:12 +00:00
Daniel P. Berrangé ca411b7c8a qapi: introduce x-query-ramblock QMP command
This is a counterpart to the HMP "info ramblock" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02 15:55:14 +00:00
Daniel P. Berrangé 8dbbca5c05 qapi: introduce x-query-rdma QMP command
This is a counterpart to the HMP "info rdma" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02 15:55:14 +00:00
Daniel P. Berrangé fc30920731 qapi: introduce x-query-usb QMP command
This is a counterpart to the HMP "info usb" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02 15:55:14 +00:00
Daniel P. Berrangé 1b8ae799d8 qapi: introduce x-query-numa QMP command
This is a counterpart to the HMP "info numa" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02 15:55:14 +00:00
Daniel P. Berrangé 37087fde0e qapi: introduce x-query-profile QMP command
This is a counterpart to the HMP "info profile" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02 15:55:14 +00:00
Daniel P. Berrangé dd98234c05 qapi: introduce x-query-roms QMP command
This is a counterpart to the HMP "info roms" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02 15:55:13 +00:00
Daniel P. Berrangé 3e11e0b2dd monitor: remove 'info ioapic' HMP command
This command was turned into a no-op four years ago in

  commit 0c8465440d
  Author: Peter Xu <peterx@redhat.com>
  Date:   Fri Dec 29 15:31:04 2017 +0800

    hmp: obsolete "info ioapic"

Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-02 15:55:13 +00:00
Yang Zhong 57d874c4c7 target/i386: Add HMP and QMP interfaces for SGX
The QMP and HMP interfaces can be used by monitor or QMP tools to retrieve
the SGX information from VM side when SGX is enabled on Intel platform.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Gerd Hoffmann bca6eb34f0 monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically
One more little step towards modular tcg ...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-35-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09 18:21:33 +02:00
Gerd Hoffmann f1a74bf976 monitor/usb: register 'info usbhost' dynamically
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-33-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-09 18:21:33 +02:00
Peter Xu a4a571d978 hmp: Add "calc_dirty_rate" and "info dirty_rate" cmds
These two commands are missing when adding the QMP sister commands.
Add them, so developers can play with them easier.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <4cc0039fc3ad6145136770cf3b0f056c09a2910b.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-06-08 20:18:26 +01:00
Bruno Larsen (billionai) de3036acb4 monitor: removed cpustats command
Since ppc was the last architecture to collect these statistics and
it is currently phasing this collection out, the command that would query
this information is being removed.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-5-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-06-03 18:10:31 +10:00
Daniel P. Berrangé cbde7be900 migrate: remove QMP/HMP commands for speed, downtime and cache size
The generic 'migrate_set_parameters' command handle all types of param.

Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Pavel Dovgalyuk e3b09ad2b6 replay: introduce info hmp/qmp command
This patch introduces 'info replay' monitor command and
corresponding qmp request.
These commands request the current record/replay mode, replay log file
name, and the instruction count (number of recorded/replayed
instructions).  The instruction count can be used with the
replay_seek/replay_break commands added in the next two patches.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <160174520026.12451.13112161947433306561.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-06 08:34:49 +02:00
Philippe Mathieu-Daudé 2261d3939f memory: Make 'info mtree' not display disabled regions by default
We might have many disabled memory regions, making the 'info mtree'
output too verbose to be useful.
Remove the disabled regions in the default output, but allow the
monitor user to display them using the '-D' option.

Before:

  (qemu) info mtree
  memory-region: system
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
      0000000000000000-ffffffffffffffff (prio -1, i/o): pci
        00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
        00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
        00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
        00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
      00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-ram @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-pci @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-rom @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-ram @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-pci @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-rom @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-ram @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-pci @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-rom @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-ram @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-pci @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-rom @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-ram @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-pci @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-rom @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
      00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
      00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
      00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi

After:

  (qemu) info mtree
  memory-region: system
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
      0000000000000000-ffffffffffffffff (prio -1, i/o): pci
        00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
        00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
        00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
        00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
      00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
      00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
      00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
      00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
      00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
      00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
      00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
      00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
      00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
      00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
      00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
      00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
      00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
      00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
      00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
      00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
      00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi

The old behavior is preserved using 'info mtree -D'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:10:49 -04:00
Peter Maydell 3c95fdef94 Update comments in .hx files that mention Texinfo
Update the header comments in .hx files that mention STEXI/ETEXI
markup; this is now SRST/ERST as all these files have been
converted to rST.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-3-peter.maydell@linaro.org
2020-03-12 11:14:05 +00:00
Peter Maydell 29f9dff790 *.hx: Remove all the STEXI/ETEXI blocks
We no longer generate texinfo from the hxtool input files,
so delete all the STEXI/ETEXI blocks.

This commit was created using the following Perl one-liner:
  perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-06 11:06:55 +00:00
Peter Maydell a12e74cc52 hmp-commands-info.hx: Add rST documentation fragments
Add the rST versions of the documentation fragments.  Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.

Note that most of the SRST fragments are 2-space indented so that the
'info foo' documentation entries appear as a sublist under the 'info'
entry in the top level list.

Again, all we need to do to put the documentation in the Sphinx manual
is a one-line hxtool-doc invocation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-22-peter.maydell@linaro.org
2020-03-06 10:05:12 +00:00
Bin Meng df42fdd6cc
riscv: hmp: Add a command to show virtual memory mappings
This adds 'info mem' command for RISC-V, to show virtual memory
mappings that aids debugging.

Rather than showing every valid PTE, the command compacts the
output by merging all contiguous physical address mappings into
one block and only shows the merged block mapping details.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17 08:42:43 -07:00
Yuval Shaia f4b2c02a29 {hmp, hw/pvrdma}: Expose device internals via monitor interface
Allow interrogating device internals through HMP interface.
The exposed indicators can be used for troubleshooting by developers or
sysadmin.
There is no need to expose these attributes to a management system (e.x.
libvirt) because (1) most of them are not "device-management' related
info and (2) there is no guarantee the interface is stable.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1552300155-25216-6-git-send-email-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-03-16 15:52:44 +02:00
Emilio G. Cota 97bfafe28a hmp-commands-info: add sync-profile
The command introduced here is just for developers. This means that:

- the info displayed and the output format could change in the future
- the command is only meant to be used from HMP, not from QMP

Sample output:

(qemu) sync-profile
sync-profile is off
(qemu) info sync-profile
Type               Object  Call site  Wait Time (s)         Count  Average (us)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(qemu) sync-profile on
(qemu) sync-profile
sync-profile is on
(qemu) info sync-profile 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                    91.38235          2842      32154.24
BQL mutex  0x55a0171b7140  cpus.c:1434                    12.56490          5787       2171.23
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.75846          2844       2728.01
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.09889          2884       1767.99
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        3.46140          3254       1063.74
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76333          8655         88.20
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60893          2941        207.05
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.00894          6425          1.39
mutex      [           3]  util/qemu-timer.c:520           0.00342         50611          0.07
mutex      [           2]  util/qemu-timer.c:426           0.00254         31336          0.08
mutex      [           3]  util/qemu-timer.c:234           0.00107         19275          0.06
mutex      0x55a0171d9960  vl.c:763                        0.00043          6425          0.07
mutex      0x55a0180d1bb0  monitor.c:458                   0.00015          1603          0.09
mutex      0x55a0180e4c78  chardev/char.c:109              0.00002           217          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00001           162          0.08
----------------------------------------------------------------------------------------------
(qemu) info sync-profile -m 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                    95.11196          3051      31174.03
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.92108          3052       2595.37
BQL mutex  0x55a0171b7140  cpus.c:1434                    13.38253          6210       2155.00
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.09901          3093       1648.57
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        4.21123          3468       1214.31
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60895          3156        192.95
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76337          9282         82.24
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.00944          6889          1.37
mutex      0x55a01813ce80  tcg/tcg.c:397                   0.00000            24          0.15
mutex      0x55a0180d1bb0  monitor.c:458                   0.00018          1922          0.09
mutex      [           2]  util/qemu-timer.c:426           0.00266         32710          0.08
mutex      0x55a0180e4c78  chardev/char.c:109              0.00002           260          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00001           187          0.08
mutex      0x55a0171d9960  vl.c:763                        0.00047          6889          0.07
mutex      [           3]  util/qemu-timer.c:520           0.00362         53377          0.07
----------------------------------------------------------------------------------------------
(qemu) info sync-profile -m -n 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                   101.39331          3398      29839.12
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.92112          3399       2330.43
BQL mutex  0x55a0171b7140  cpus.c:1434                    14.28280          6922       2063.39
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.77505          3445       1676.36
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        5.66139          3883       1457.99
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60901          3519        173.06
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76351         10338         73.85
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.01032          7664          1.35
mutex      0x55a0180e4f08  util/qemu-timer.c:426           0.00041           901          0.45
mutex      0x55a01813ce80  tcg/tcg.c:397                   0.00000            24          0.15
mutex      0x55a0180d1bb0  monitor.c:458                   0.00022          2319          0.09
mutex      0x55a0180e4c78  chardev/char.c:109              0.00003           306          0.08
mutex      0x55a0180e4f08  util/qemu-timer.c:520           0.00068          8565          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00002           215          0.08
mutex      0x55a0180e4f78  util/qemu-timer.c:426           0.00247         34224          0.07
----------------------------------------------------------------------------------------------
(qemu) sync-profile reset
(qemu) info sync-profile -m 2
Type               Object  Call site               Wait Time (s)         Count  Average (us)
--------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                   2.78756            99      28157.12
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870        0.33054           102       3240.55
--------------------------------------------------------------------------------------------
(qemu) sync-profile off
(qemu) sync-profile
sync-profile is off
(qemu) sync-profile reset
(qemu) info sync-profile
Type               Object  Call site  Wait Time (s)         Count  Average (us)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Marc-André Lureau 05eb4a25ae qapi: add conditions to VNC type/commands/events on the schema
Add #if defined(CONFIG_VNC) in generated code, and adjust the
qmp/hmp code accordingly.

query-qmp-schema no longer reports the command/events etc as
available when disabled at compile.

Commands made conditional:

* query-vnc, query-vnc-servers, change-vnc-password

  Before the patch, the commands for !CONFIG_VNC are stubs that fail
  like this:

    {"error": {"class": "GenericError",
               "desc": "The feature 'vnc' is not enabled"}}

  Afterwards, they fail like this:

    {"error": {"class": "CommandNotFound",
               "desc": "The command FOO has not been found"}}

  I call that an improvement, because it lets clients distinguish
  between command unavailable (class CommandNotFound) and command failed
  (class GenericError).

Events made conditional:

* VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED

HMP change:

* info vnc

  Will return "unknown command: 'info vnc'" when VNC is compiled
  out (same as error for spice when --disable-spice)

Occurrences of VNC (case insensitive) in the schema that aren't
covered by this change:

* add_client

  Command has other uses, including "socket bases character devices".
  These are unconditional as far as I can tell.

* set_password, expire_password

  In theory, these commands could be used for managing any service's
  password.  In practice, they're used for VNC and SPICE services.
  They're documented for "remote display session" / "remote display
  server".

  The service is selected by argument @protocol.  The code special-cases
  protocol-specific argument checking, then calls a protocol-specific
  function to do the work.  If it fails, the command fails with "Could
  not set password".  It does when the service isn't compiled in (it's a
  stub then).

  We could make these commands conditional on the conjunction of all
  services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)],
  but I doubt it's worthwhile.

* change

  Command has other uses, namely changing media.
  This patch inlines a stub; no functional change.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:38:54 +02:00
Peter Xu 0cda9d876c doc: another fix to "info pic"
Something that commit 254316fa1f ("intc: make HMP 'info irq' and 'info
pic' commands available on all targets", 2016-10-04) forgot to touch up.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:37 +02:00
Alexey Kardashevskiy fc051ae6c4 memory/hmp: Print owners/parents in "info mtree"
This adds owners/parents (which are the same, just occasionally
owner==NULL) printing for memory regions; a new '-o' flag
enabled new output.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180604032511.6980-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:36 +02:00
Dr. David Alan Gilbert 8c7c7ecbb1 hmp: Add commands for preconfig
Allow a bunch of the info commands to be used in preconfig.

version, chardev, name, uuid,memdev, iothreads
  Were enabled in QMP in the previous patch from Igor

status, hotpluggable_cpus
  Was enabled in the original allow-preconfig series

history
  is HMP specific

qom-tree
  Don't have a QMP equivalent

Also enable the qom commands qom-list and qom-set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180620153947.30834-6-dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Dropped info numa as per Igor's 2018-06-21 review
2018-06-21 13:16:48 +01:00
Brijesh Singh 6303631467 sev/i386: hmp: add 'info sev' command
The command can be used to show the SEV information when memory
encryption is enabled on AMD platform.

Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-13 17:36:05 +01:00
Laurent Vivier 2097dca6d3 target/m68k: add HMP command "info tlb"
Dump MMU state and address mappings.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-8-laurent@vivier.eu>
2018-01-25 16:02:25 +01:00
Markus Armbruster 1b591700e6 hmp-commands-info: Change "@findex FOO" to "@findex info FOO"
qemu-doc has the monitor commands in the "Function Index".  The "info
FOO" are listed as "FOO" there.  List them as "info FOO" instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-05 10:08:39 +01:00
Markus Armbruster a92725136c hmp-commands-info: Move Texinfo stanzas to conventional place
A command's STEXI..ETEXI stanza follows the command's initializer.
Two commands got them backwards.  Correct that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-05 10:06:05 +01:00
Markus Armbruster c325ccd304 hmp-commands-info: Fix "info rocker-FOO" misspellings
Screwed up in commit da76ee7.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-10-05 10:05:13 +01:00
Alexey Kardashevskiy 5e8fd947e2 memory: Rework "info mtree" to print flat views and dispatch trees
This adds a new "-d" switch to "info mtree" to print dispatch tree
internals.

This changes the way "-f" is handled - it prints now flat views and
associated address spaces.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-15-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21 23:19:38 +02:00
Vadim Galitsyn d0f63c1e29 hmp: introduce 'info memory_size_summary' command
Add 'info memory_size_summary' command which is a sibling
of QMP command query-memory-size-summary. It provides the
following memory information in bytes:

  * base-memory - size of "base" memory specified with command line option -m.

  * plugged-memory - amount of memory that was hot-plugged.
    If target does not have CONFIG_MEM_HOTPLUG enabled, no
    value is reported.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fixed up comments from Igor's review
2017-09-14 15:52:10 +01:00
Yi Wang 1bef228474 hmp: allow apic-id for "info lapic"
Add [apic-id] support for hmp command "info lapic", which is
useful when debugging ipi and so on. Current behavior is not
changed when the parameter isn't specified.

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Yun Liu <liu.yunh@zte.com.cn>
Message-Id: <1501049917-4701-3-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-01 11:54:24 -03:00
Claudio Imbrenda f860d49753 s390x/migration: Monitor commands for storage attributes
Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:47 +02:00
Paolo Bonzini f0d14a95a5 monitor: disable "info jit" and "info opcount" if !TCG
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04 16:01:16 +02:00
Suraj Jitindar Singh 18f0828278 monitor: Add -a (all) option to info registers
The info registers command in the qemu monitor is used to dump register
values.

Currently this command uses the monitor cpu (which can be set by the
user) as the cpu for whose registers will be dumped. Sometimes it is
useful to see the registers for all cpus and currently this requires
setting the monitor cpu and the re-running the command for each cpu
in the system. I would be nice if there was an easier way to do this.

Add the "-a" option to the info registers command to dump the register
values for all cpus.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>

Message-Id: <20170608054116.17203-1-sjitindarsingh@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-29 17:14:11 +01:00
Peter Xu be9b23c4a5 ramblock: add new hmp command "info ramblock"
To dump information about ramblocks. It looks like:

(qemu) info ramblock
              Block Name    PSize              Offset               Used              Total
            /objects/mem    2 MiB  0x0000000000000000 0x0000000080000000 0x0000000080000000
                vga.vram    4 KiB  0x0000000080060000 0x0000000001000000 0x0000000001000000
    /rom@etc/acpi/tables    4 KiB  0x00000000810b0000 0x0000000000020000 0x0000000000200000
                 pc.bios    4 KiB  0x0000000080000000 0x0000000000040000 0x0000000000040000
  0000:00:03.0/e1000.rom    4 KiB  0x0000000081070000 0x0000000000040000 0x0000000000040000
                  pc.rom    4 KiB  0x0000000080040000 0x0000000000020000 0x0000000000020000
    0000:00:02.0/vga.rom    4 KiB  0x0000000081060000 0x0000000000010000 0x0000000000010000
   /rom@etc/table-loader    4 KiB  0x00000000812b0000 0x0000000000001000 0x0000000000001000
      /rom@etc/acpi/rsdp    4 KiB  0x00000000812b1000 0x0000000000001000 0x0000000000001000

Ramblock is something hidden internally in QEMU implementation, and this
command should only be used by mostly QEMU developers on RAM stuff. It
is not a command suitable for QMP interface. So only HMP interface is
provided for it.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17 17:31:16 +01:00
Igor Mammedov 39164c136c qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
Add commands to query Virtual Machine Generation ID counter.

QMP command example:
    { "execute": "query-vm-generation-id" }

HMP command example:
    info vm-generation-id

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02 07:14:27 +02:00
Peter Xu 57bb40c9db memory: hmp: add "-f" for "info mtree"
Adding one more option "-f" for "info mtree" to dump the flat views of
all the address spaces.

This will be useful to debug the memory rendering logic, also it'll be
much easier with it to know what memory region is handling what address
range.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:31 +01:00
Hervé Poussineau 254316fa1f intc: make HMP 'info irq' and 'info pic' commands available on all targets
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-7-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04 10:00:25 +02:00
Hervé Poussineau 61b97833b3 intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider interface
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-6-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04 10:00:25 +02:00
Marc-André Lureau 2b9e35760a monitor: remove mhandler.cmd_new
This is no longer necessary now that we aren't using middle mode
anymore.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19 17:32:22 +02:00