Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:
$ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nbd'
image: nbd+unix://?socket=/tmp/nbdkitHSAzNz/socket
file format: raw
virtual size: -8388607T (9223372036854775296 bytes)
disk size: unavailable
But there's no reason to have two separate implementations of integer
to human-readable abbreviation, where one has overflow and stops at
'T', while the other avoids overflow and goes all the way to 'E'. With
this patch, the output now claims 8EiB instead of -8388607T, which
really is the correct rounding of largest file size supported by qemu
(we could go 511 bytes larger if we used byte-accurate sizing instead
of rounding up to the next sector boundary, but that wouldn't change
the human-readable result).
Quite a few iotests need updates to expected output to match.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
One of the recent commits changed the way qemu-io prints out its
errors and warnings - they are now prefixed with the program name.
We've got to adapt the iotests accordingly to prevent that they
are failing.
Fixes: 99e98d7c9f ("qemu-io: Use error_[gs]et_progname()")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filter the qemu-nbd server output to get rid of a direct reference
to my build directory.
Fixes: e9dce9cb
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
tmpfs does not support O_DIRECT. Detect this case, and skip flipping
@direct if the filesystem does not support it.
Fixes: bf3e50f623
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 235 currently only works with KVM - this is bad for systems where
it is not available, e.g. CI pipelines. The test also works when using
"tcg" as accelerator, so we can simply add that to the list of accelerators,
too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The base node of a block-stream operation indicates the first image
from the backing chain starting from which no data is copied to the
top node.
The block-stream job allows others to use that base image, so a second
block-stream job could be writing to it at the same time. An important
restriction is that the base image must not disappear while the stream
job is ongoing. stream_start() freezes the backing chain from top to
base with that purpose but it does it too late in the code so there is
a race condition there.
This bug was fixed in the previous commit, and this patch contains an
iotest for this scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The file tests/qemu-iotests/COPYING is the same text as in the
COPYING file in the main directory. So as far as I can see, we don't
need the duplicate here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio-pci is optional on s390x, e.g. in downstream RHEL builds, it
is disabled. On s390x, virtio-ccw should be used instead. Other tests
like 051 or 240 already use virtio-scsi-ccw instead of virtio-scsi-pci
on s390x, so let's do the same here and always use virtio-scsi-ccw on
s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their
reply according to bdrv_block_status() boundaries. If the block device
has a request_alignment smaller than 512, but we advertise a block
alignment of 512 to the client, then this can result in the server
reply violating client expectations by reporting a smaller region of
the export than what the client is permitted to address (although this
is less of an issue for qemu 4.0 clients, given recent client patches
to overlook our non-compliance at EOF). Since it's always better to
be strict in what we send, it is worth advertising the actual minimum
block limit rather than blindly rounding it up to 512.
Note that this patch is not foolproof - it is still possible to
provoke non-compliant server behavior using:
$ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file
That is arguably a bug in the blkdebug driver (it should never pass
back block status smaller than its alignment, even if it has to make
multiple bdrv_get_status calls and determine the
least-common-denominator status among the group to return). It may
also be possible to observe issues with a backing layer with smaller
alignment than the active layer, although so far I have been unable to
write a reliable iotest for that scenario (but again, an issue like
that could be argued to be a bug in the block layer, or something
where we need a flag to bdrv_block_status() to state whether the
result must be aligned to the current layer's limits or can be
subdivided for accuracy when chasing backing files).
Anyways, as blkdebug is not normally used, and as this patch makes our
server more interoperable with qemu 3.1 clients, it is worth applying
now, even while we still work on a larger patch series for the 4.1
timeframe to have byte-accurate file lengths.
Note that the iotests output changes - for 223 and 233, we can see the
server's better granularity advertisement; and for 241, the three test
cases have the following effects:
- natural alignment: the server's smaller alignment is now advertised,
and the hole reported at EOF is now the right result; we've gotten rid
of the server's non-compliance
- forced server alignment: the server still advertises 512 bytes, but
still sends a mid-sector hole. This is still a server compliance bug,
which needs to be fixed in the block layer in a later patch; output
does not change because the client is already being tolerant of the
non-compliance
- forced client alignment: the server's smaller alignment means that
the client now sees the server's status change mid-sector without any
protocol violations, but the fact that the map shows an unaligned
mid-sector hole is evidence of the block layer problems with aligned
block status, to be fixed in a later patch
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: rebase to enhanced iotest 241 coverage]
It is desirable for 'qemu-img map' to have the same output for a file
whether it is served over file or nbd protocols. However, ever since
we implemented block status for NBD (2.12), the NBD protocol forgot to
inform the block layer that as the final layer in the chain, the
offset is valid; without an offset, the human-readable form of
qemu-img map gives up with the unhelpful:
$ nbdkit -U - data data="1" size=512 --run 'qemu-img map $nbd'
Offset Length Mapped to File
qemu-img: File contains external, encrypted or compressed clusters.
The --output=json form always works, because it is reporting the
lower-level bdrv_block_status results directly rather than trying to
filter out sparse ranges for human consumption - but now it also
shows the offset member.
With this patch, the human output changes to:
Offset Length Mapped to File
0 0x200 0 nbd+unix://?socket=/tmp/nbdkitOxeoLa/socket
This change is observable to several iotests.
Fixes: 78a33ab5
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Add a test for the NBD client workaround in the previous patch. It's
not really feasible for an iotest to assume a specific tracing engine,
so we can't really probe trace_nbd_parse_blockstatus_compliance to see
if the server was fixed vs. whether the client just worked around the
server (other than by rearranging order between code patches and this
test). But having a successful exchange sure beats the previous state
of an error message. Since format probing can change alignment, we can
use that as an easy way to test several configurations.
Not tested yet, but worth adding to this test in future patches: an
NBD server that can advertise a non-sector-aligned size (such as
nbdkit) causes qemu as the NBD client to misbehave when it rounds the
size up and accesses beyond the advertised size. Qemu as NBD server
never advertises a non-sector-aligned size (since bdrv_getlength()
currently rounds up to sector boundaries); until qemu can act as such
a server, testing that flaw will have to rely on external binaries.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-2-eblake@redhat.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: add forced-512 alignment, and nbdkit reproducer comment]
Test that mirror job actually resume on resume command after being
automatically paused on ENOSPC error.
It's a follow-up test for 8d9648cbf3
"blockjob: fix user pause in block_job_error_action"
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
232 is marked as generic, but commit 12efe428c9 added code that assumes
qcow2. What the new test really needs is backing files and support for
updating the backing file link (.bdrv_change_backing_file).
Split the non-generic code into a new test case 247 and make it work
with qed, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are various actions in this test that must be executed
sequentially, as the result of it depends on the state triggered by the
previous one.
If the last argument of _send_qemu_cmd() is an empty string, it just
sends the QMP commands without waiting for an answer. While unlikely, it
may happen that the next action in the test gets invoked before QEMU
processes the QMP request.
This issue seems to be easier to reproduce on servers with limited
resources or highly loaded.
With this change, we wait for an answer on all _send_qemu_cmd() calls.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds several tests for the x-blockdev-reopen QMP command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Until now, with auto-read-only=on we tried to open the file read-write
first and if that failed, read-only was tried. This is actually not good
enough for libvirt, which gives QEMU SELinux permissions for read-write
only as soon as it actually intends to write to the image. So we need to
be able to switch between read-only and read-write at runtime.
This patch makes auto-read-only dynamic, i.e. the file is opened
read-only as long as no user of the node has requested write
permissions, but it is automatically reopened read-write as soon as the
first writer is attached. Conversely, if the last writer goes away, the
file is reopened read-only again.
bs->read_only is no longer set for auto-read-only=on files even if the
file descriptor is opened read-only because it will be transparently
upgraded as soon as a writer is attached. This changes the output of
qemu-iotests 232.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using a different read-only setting for bs->open_flags than for the
flags to the driver's open function is just inconsistent and a bad idea.
After this patch, the temporary snapshot keeps being opened read-only if
read-only=on,snapshot=on is passed.
If we wanted to change this behaviour to make only the orginal image
file read-only, but the temporary overlay read-write (as the comment in
the removed code suggests), that change would have to be made in
bdrv_temp_snapshot_options() (where the comment suggests otherwise).
Addressing this inconsistency before introducing dynamic auto-read-only
is important because otherwise we would immediately try to reopen the
temporary overlay even though the file is already unlinked.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that we can actually resize qcow2 images with persistent bitmaps
correctly. Throw some other goofy stuff at the test while we're at it,
like adding bitmaps of different granularities and at different times.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20190311185147.52309-5-vsementsov@virtuozzo.com
[vsmentsov: drop \n from the end of test output,
test output changed a bit: some bitmaps goes in other order
int the output]
Signed-off-by: John Snow <jsnow@redhat.com>
This adds a simple test that ensures the busy bit works for push backups,
as well as doubling as bonus test for incremental backups that get interrupted
by EIO errors.
Recording bit tests are already handled sufficiently by 236.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20190223000614.13894-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The current API allows us to report a single status, which we've defined as:
Frozen: has a successor, treated as qmp_locked, may or may not be enabled.
Locked: no successor, qmp_locked. may or may not be enabled.
Disabled: Not frozen or locked, disabled.
Active: Not frozen, locked, or disabled.
The problem is that both "Frozen" and "Locked" mean nearly the same thing,
and that both of them do not intuit whether they are recording guest writes
or not.
This patch deprecates that status field and introduces two orthogonal
properties instead to replace it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Test that preallocating metadata results in a somewhat larger qcow2
file, but preallocating data only affects the disk usage of the data
file and the qcow2 file stays small.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Provide an option to force QEMU to always keep the external data file
consistent as a standalone read-only raw image.
At the moment, this means making sure that write_zeroes requests are
forwarded to the data file instead of just updating the metadata, and
checking that no backing file is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than requiring that the external data file node is passed
explicitly when creating the qcow2 node, store the filename in the
designated header extension during .bdrv_create and read it from there
as a default during .bdrv_open.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_alloc_compressed_cluster_offset() used to return the cluster
offset for success and 0 for error. This doesn't only conflict with 0 as
a valid host offset, but also loses the error code.
Similar to the change made to qcow2_alloc_cluster_offset() for
uncompressed clusters in commit 148da7ea9d, make the function return
0/-errno and return the allocated cluster offset in a by-reference
parameter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds basic constants, struct fields and helper function for
external data file support to the implementation.
QCOW2_INCOMPAT_MASK and QCOW2_AUTOCLEAR_MASK are not updated yet so that
opening images with an external data file still fails (we don't handle
them correctly yet).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Various sed regexp from common.filter use sed GNU extensions.
Instead of spending time to write these regex to be POSIX compliant,
verify the GNU sed is available and use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Patch created mechanically by running:
$ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
| while read f; do \
sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
done
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some test cases require specific formats. The method decorator
skip_if_unsupported() checks if requested formats are whitelisted.
The test #139 was selected for a sample output, after running
$ ./check -qcow2 131-140
137 3s ...
138 0s ...
139 2s ...
[case not run] testBlkDebug (__main__.TestBlockdevDel): formats ['blkdebug'] are not whitelisted
[case not run] testBlkVerify (__main__.TestBlockdevDel): formats ['blkverify'] are not whitelisted
[case not run] testQuorum (__main__.TestBlockdevDel): formats ['quorum'] are not whitelisted
140 0s ...
Not run: 131 135 136
Some cases not run in: 139
Passed all 7 tests
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Supported formats listed by 'qemu' may differ from those listed by
'qemu-img' due to whitelists. Some test cases require specific formats
that may be used with qemu. They can be inquired directly by running
'qemu -drive format=help'. The response takes whitelists into account.
The method supported_formats() serves for that. The method decorator
skip_if_unsupported() checks if all requested formats are whitelisted.
If not, the test case will be skipped. That has been implemented in
the 'check' file in the way similar to the 'test notrun' mechanism.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the binary mode with the default text one when *.notrun
files are opened for skipped tests. That change is made for the
compatibility with Python 3 which returns error otherwise.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 238 does not require the kvm accelerator. Using the qtest
accelerator allows the test to run in both non-kvm and non-tcg
environments.
iotests.VM implicitly uses the qtest accelerator and is really the class
that this test should be using. Switch to that instead of
qemu.QEMUMachine.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
-----BEGIN PGP SIGNATURE-----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=dwff
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue, 2019-02-22
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
# gpg: Signature made Fri 22 Feb 2019 19:37:07 GMT
# gpg: using RSA key 657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16
Acceptance tests: use linux-3.6 and set vm memory to 4GiB
tests.acceptance: adds simple migration test
tests.acceptance: adds multi vm capability for acceptance tests
scripts/qemu.py: log QEMU launch command line
Introduce a Python module structure
Acceptance tests: drop usage of "🥑 enable"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When iotest 223 was first written, it didn't matter if we waited for
the qemu process to clean up. But with the introduction of a later
qemu-nbd process trying to reuse the same file, there is a race where
even though the asynchronous qemu process has responded to "quit", it
has not yet had time to unlock the file and exit, resulting in:
-[{ "start": 0, "length": 65536, "depth": 0, "zero": false, "data": false},
-{ "start": 65536, "length": 2031616, "depth": 0, "zero": false, "data": true},
-{ "start": 2097152, "length": 2097152, "depth": 0, "zero": false, "data": false}]
+qemu-nbd: Failed to blk_new_open 'tests/qemu-iotests/scratch/t.qcow2': Failed to get shared "write" lock
+Is another process using the image [tests/qemu-iotests/scratch/t.qcow2]?
+qemu-img: Could not open 'driver=nbd,server.type=unix,server.path=tests/qemu-iotests/scratch/qemu-nbd.sock,x-dirty-bitmap=qemu:dirty-bitmap:b': Failed to connect socket tests/qemu-iotests/scratch/qemu-nbd.sock: Connection refused
+./common.nbd: line 33: kill: (11122) - No such process
Fixes: ddd09448
Reported-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190305182908.13557-1-eblake@redhat.com>
Tested-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Currently any client which can complete the TLS handshake is able to use
the NBD server. The server admin can turn on the 'verify-peer' option
for the x509 creds to require the client to provide a x509 certificate.
This means the client will have to acquire a certificate from the CA
before they are permitted to use the NBD server. This is still a fairly
low bar to cross.
This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which
takes the ID of a previously added 'QAuthZ' object instance. This will
be used to validate the client's x509 distinguished name. Clients
failing the authorization check will not be permitted to use the NBD
server.
For example to setup authorization that only allows connection from a client
whose x509 certificate distinguished name is
CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB
escape the commas in the name and use:
qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
--object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB' \
--tls-creds tls0 \
--tls-authz authz0 \
....other qemu-nbd args...
NB: a real shell command line would not have leading whitespace after
the line continuation, it is just included here for clarity.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20190227162035.18543-2-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: split long line in --help text, tweak 233 to show that whitespace
after ,, in identity= portion is actually okay]
Signed-off-by: Eric Blake <eblake@redhat.com>
When we run "certtool 2>&1 | head -1" the latter command is likely to
complete and exit before certtool has written everything it wants to
stderr. In at least the RHEL-7 gnutls 3.3.29 this causes certtool to
quit with broken pipe before it has finished writing the desired
output file to disk. This causes non-deterministic failures of the
iotest 233 because the certs are sometimes zero length files.
If certtool fails the "head -1" means we also lose any useful error
message it would have printed.
Thus this patch gets rid of the pipe and post-processes the output in a
more flexible & reliable manner.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190220145819.30969-3-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If we abort the iotest early the server.log file might contain useful
information for diagnosing the problem. Ensure its contents are
displayed in this case.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190220145819.30969-2-berrange@redhat.com>
[eblake: fix shell quoting]
Signed-off-by: Eric Blake <eblake@redhat.com>
The data type for bytes in Python 3 differs from the one in Python 2.
The type cast that is compatible with both versions was applied.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1551197495-24425-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
VDI keeps the whole bitmap in memory, and the maximum size (which is
tested here) is 2 GB. This may not be available on all machines, and it
rarely is available when running a 32 bit build.
Fix this by making VM.run_job() return the error string if an error
occurred, and checking whether that contains "Could not allocate bmap"
in 211. If so, the test is skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190218180646.30282-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The previous patch includes the LUKS payload overhead into the qemu-img
measure calculation for qcow2. Update qemu-iotests 178 to exercise this
new code path.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218104525.23674-3-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This follows what qmp() does, so the output will correspond to the
actual QMP command.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190210145736.1486-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Adding a telnet monitor for no real purpose on a fixed port is not so
great. Just use a null monitor instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
8908b253c4 has implemented filtering of
remote paths for NFS, but forgot SSH. This patch takes care of that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
filter_qmp_testfiles() currently filters the filename only for specific
keys. However, there are more keys that take filenames (such as
block-commit's @top and @base, or ssh's @path), and it does not make
sense to list them all here. "$TEST_DIR/$PID-" should have enough
entropy not to appear anywhere randomly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
On Python 2.x, strings are not always unicode strings. This function
checks whether a given value is a plain string, or a unicode string (if
there is a difference).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With IMGOPTSSYNTAX, $TEST_IMG is useless for this test (it only tests
the file-posix protocol driver). Therefore, if $TEST_IMG_FILE is set,
use that instead.
Because this test requires the file protocol, $TEST_IMG_FILE will always
be set if $IMGOPTSSYNTAX is true.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test creates no such file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
math.ceil() returns an integer on Python 3.x, but a float on Python 2.x.
range() always needs integers, so we need an explicit conversion on 2.x
(which does not hurt on 3.x).
It is not quite clear whether we want to support Python 2.x for any
prolonged time, but this may as well be fixed along with the other
issues some iotests have right now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190210145736.1486-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A previous commit removed the default filters for qmp_log with the
intention to make them explicit; but this happened only for test 206.
There are more tests (for more exotic image formats than qcow2) which
require the filename filter, though.
Note that 237 is still broken for Python 2.x, which is fixed in the next
commit.
Fixes: f8ca8609d8
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both
refresh the filename (BDS.exact_filename) and set BDS.full_open_options.
Now that we have generic code in the central bdrv_refresh_filename() for
creating BDS.full_open_options, we can drop the latter part from all
BlockDriver.bdrv_refresh_filename() implementations.
This also means that we can drop all of the existing default code for
this from the global bdrv_refresh_filename() itself.
Furthermore, we now have to call BlockDriver.bdrv_refresh_filename()
after having set BDS.full_open_options, because the block driver's
implementation should now be allowed to depend on BDS.full_open_options
being set correctly.
Finally, with this patch we can drop the @options parameter from
BlockDriver.bdrv_refresh_filename(); also, add a comment on this
function's purpose in block/block_int.h while touching its interface.
This completely obsoletes blklogwrite's implementation of
.bdrv_refresh_filename().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-25-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of having every block driver which implements
bdrv_refresh_filename() copy all of the strong runtime options over to
bs->full_open_options, implement this process generically in
bdrv_refresh_filename().
This patch only adds this new generic implementation, it does not remove
the old functionality. This is done in a follow-up patch.
With this patch, some superfluous information (that should never have
been there) may be removed from some JSON filenames, as can be seen in
the change to iotests 110's and 228's reference outputs.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-24-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 110 tests relative backing filenames for complex BDS trees. Now
that the originally supposedly failing test passes, let us add a new
failing test: Quorum can never work automatically (without detecting
whether all child nodes have the same base directory, but that would be
rather inconsistent behavior).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-21-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_get_full_backing_filename_from_filename() breaks down when it comes
to JSON filenames. Using bdrv_dirname() as the basis is better because
since we have BDS, we can descend through the BDS tree to the protocol
layer, which gives us a greater probability of finding a non-JSON name;
also, bdrv_dirname() is more correct as it allows block drivers to
override the generation of that directory name in a protocol-specific
way.
We still need to keep bdrv_get_full_backing_filename_from_filename(),
though, because it has valid callers which need it during image creation
when no BDS is available yet.
This makes a test case in qemu-iotest 110, which was supposed to fail,
work. That is actually good, but we need to change the reference output
(and the comment in 110) accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function queries a node; since we cannot do that right now, it
executes query-named-block-nodes and returns the matching node's object.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190201192935.18394-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-7-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Basically, bdrv_refresh_filename() should respect all children of a
BlockDriverState. However, generally those children are driver-specific,
so this function cannot handle the general case. On the other hand,
there are only few drivers which use other children than @file and
@backing (that being vmdk, quorum, and blkverify).
Most block drivers only use @file and/or @backing (if they use any
children at all). Both can be implemented directly in
bdrv_refresh_filename.
The user overriding the file's filename is already handled, however, the
user overriding the backing file is not. If this is done, opening the
BDS with the plain filename of its file will not be correct, so we may
not set bs->exact_filename in that case.
iotest 051 contains test cases for overriding the backing file, and so
its output changes with this patch applied.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Since qemu currently doesn't flush persistent bitmaps to disk until
shutdown (which might be MUCH later), it's useful if 'query-block'
at least shows WHICH bitmaps will (eventually) make it to persistent
storage. Update affected iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190204210512.27458-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A new test file 242 added to the qemu-iotests set. It checks
the format of qcow2 specific information for the new added
section that lists details of bitmaps.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1549638368-530182-4-git-send-email-andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: pep8 compliance, avoid trailing blank line]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's not enough to order the kwargs for consistent QMP log output,
we must also sort any sub-dictionaries in lists that appear as values.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without this filter, this test sometimes fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch forbids attaching a disk to a SCSI device if its using a
different AioContext. Test case included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a crash when attaching two disks with the same blockdev to
a SCSI device that is using iothreads. Test case included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a crash when attaching a disk to a SCSI device using
iothreads, then detaching it and reattaching it again. Test case
included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clarify that the number of extents provided in BlockdevCreateOptionsVmdk
must match the number of extents that will actually be used. Providing
more extents will result in an error now.
This requires adapting the test case to provide the right number of
extents.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This test waits for a MIGRATION event with status=completed on the
source VM before querying the migration status on both source and
destination. However, just because the source says migration has
completed does not mean the destination thinks the same. Therefore, in
some cases, the destination VM may still report "active" instead of
"completed" when asked for its migration status.
Fix this by enabling migration events on both VMs and waiting until both
source and destination emit a status=completed MIGRATION event.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recently, some bugs in dmg file have been fixed. To prevent reading dmg
is broken someday in the future, add a simple test which ensures the
conversion from dmg to raw should not hang or face any I/O error.
Signed-off-by: yuchenlin <npes87184@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mirror_start_job() function used for the commit-active job blocks
the source, target and all intermediate nodes for the duration of the
job.
target <- intermediate <- source
Since 4ef85a9c23 this function creates a dummy mirror_top_bs that
goes on top of the source node, and it is this dummy node that gets
blocked instead. The source node is never blocked or added to the
job's list of nodes.
target <- intermediate <- source <- mirror_top
At the moment I don't think it is possible to exploit this problem
because any additional job on 'source' would either be forbidden for
other reasons or it would need to involve an additional node that is
blocked, causing an error.
This can be seen in the error messages, however, because they never
refer to the source node being blocked:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-io -c 'write 0 1M' hd0.qcow2
$ $QEMU -drive if=none,file=hd1.qcow2,node-name=hd1
{ "execute": "qmp_capabilities" }
{ "execute": "block-commit", "arguments": {"device": "hd1", "speed": 256}}
{ "execute": "block-stream", "arguments": {"device": "hd1"}}
{ "error": {"class": "GenericError",
"desc": "Node 'hd0' is busy: block device is in use by block job: commit"}}
After this patch the error message refers to 'hd1', as it should.
The expected output of iotest 141 also needs to be updated for the
same reason.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To do this, we need to allow creating the NBD server on various ports
instead of a single one (which may not even work if you run just one
instance, because something entirely else might be using that port).
So we just pick a random port in [32768, 32768 + 1024) and try to create
a server there. If that fails, we just retry until something sticks.
For the IPv6 test, we need a different range, though (just above that
one). This is because "localhost" resolves to both 127.0.0.1 and ::1.
This means that if you bind to it, it will bind to both, if possible, or
just one if the other is already in use. Therefore, if the IPv6 test
has already taken [::1]:some_port and we then try to take
localhost:some_port, that will work -- only the second server will be
bound to 127.0.0.1:some_port alone and not [::1]:some_port in addition.
So we have two different servers on the same port, one for IPv4 and one
for IPv6.
But when we then try to connect to the server through
localhost:some_port, we will always end up at the IPv6 one (as long as
it is up), and this may not be the one we want.
Thus, we must make sure not to create an IPv6-only NBD server on the
same port as a normal "dual-stack" NBD server -- which is done by using
distinct port ranges, as explained above.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-4-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default, qemu-nbd binds to 0.0.0.0. However, we then proceed to
connect to "localhost". Usually, this works out fine; but if this test
is run concurrently, some other test function may have bound a different
server to ::1 (on the same port -- you can bind different serves to the
same port, as long as one is on IPv4 and the other on IPv6).
So running qemu-nbd works, it can bind to 0.0.0.0:NBD_PORT. But
potentially a concurrent test has successfully taken [::1]:NBD_PORT. In
this case, trying to connect to "localhost" will lead us to the IPv6
instance, where we do not want to end up.
Fix this by just binding to "localhost". This will make qemu-nbd error
out immediately and not give us cryptic errors later.
(Also, it will allow us to just try a different port as of a future
patch.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In some cases, we may want to deal with qemu-nbd errors (e.g. by
launching it in a different configuration until it no longer throws
any). In that case, we do not want its output ending up in the test
output.
It may still be useful for handling the error, though, so add a new
function that works basically like qemu_nbd(), only that it returns the
qemu-nbd output instead of making it end up in the log. In contrast to
qemu_img_pipe(), it does still return the exit code as well, though,
because that is even more important for error handling.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Hot-unplug a scsi-hd using an iothread. The previous patch fixes a
segfault in this scenario.
This patch adds a regression test.
Suggested-by: Alberto Garcia <berto@igalia.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190114133257.30299-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Any good new feature deserves some regression testing :)
Coverage includes:
- 223: what happens when there are 0 or more than 1 export,
proof that we can see multiple contexts including qemu:dirty-bitmap
- 233: proof that we can list over TLS, and that mix-and-match of
plain/TLS listings will behave sanely
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190117193658.16413-22-eblake@redhat.com>
We have a race between the nbd server and the client both trying
to report errors at once which can make the test sometimes fail
if the output lines swap order under load. Break the race by
collecting server messages into a file and then replaying that
at the end of the test.
We may yet want to fix the server to not output ANYTHING for a
client action except when -v was used (to avoid malicious clients
from being able to DoS a server by filling up its logs), but that
is saved for a future patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190117193658.16413-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Having to fire up qemu, then use QMP commands for nbd-server-start
and nbd-server-add, just to expose a persistent dirty bitmap, is
rather tedious. Make it possible to expose a dirty bitmap using
just qemu-nbd (of course, for now this only works when qemu-nbd is
visiting a BDS formatted as qcow2).
Of course, any good feature also needs unit testing, so expand
iotest 223 to cover it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-9-eblake@redhat.com>
With the experimental x-nbd-server-add-bitmap command, there was
a window of time where an NBD client could see the export but not
the associated dirty bitmap, which can cause a client that planned
on using the dirty bitmap to be forced to treat the entire image
as dirty as a safety fallback. Furthermore, if the QMP client
successfully exports a disk but then fails to add the bitmap, it
has to take on the burden of removing the export. Since we don't
allow changing the exposed dirty bitmap (whether to a different
bitmap, or removing advertisement of the bitmap), it is nicer to
make the bitmap tied to the export at the time the export is
created, with automatic failure to export if the bitmap is not
available.
The experimental command included an optional 'bitmap-export-name'
field for remapping the name exposed over NBD to be different from
the bitmap name stored on disk. However, my libvirt demo code
for implementing differential backups on top of persistent bitmaps
did not need to take advantage of that feature (it is instead
possible to create a new temporary bitmap with the desired name,
use block-dirty-bitmap-merge to merge one or more persistent
bitmaps into the temporary, then associate the temporary with the
NBD export, if control is needed over the exported bitmap name).
Hence, I'm not copying that part of the experiment over to the
stable addition. For more details on the libvirt demo, see
https://www.redhat.com/archives/libvir-list/2018-October/msg01254.html,
https://kvmforum2018.sched.com/event/FzuB/facilitating-incremental-backup-eric-blake-red-hat
This patch focuses on the user interface, and reduces (but does
not completely eliminate) the window where an NBD client can see
the export but not the dirty bitmap, with less work to clean up
after errors. Later patches will add further cleanups now that
this interface is declared stable via a single QMP command,
including removing the race window.
Update test 223 to use the new interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-6-eblake@redhat.com>
Our initial implementation of x-nbd-server-add-bitmap put
in a restriction because of incremental backups: in that
usage, we are exporting one qcow2 file (the temporary overlay
target of a blockdev-backup sync:none job) and a dirty bitmap
owned by a second qcow2 file (the source of the
blockdev-backup, which is the backing file of the temporary).
While both qcow2 files are still writable (the target in
order to capture copy-on-write of old contents, and the
source in order to track live guest writes in the meantime),
the NBD client expects to see constant data, including the
dirty bitmap. An enabled bitmap in the source would be
modified by guest writes, which is at odds with the NBD
export being a read-only constant view, hence the initial
code choice of enforcing a disabled bitmap (the intent is
that the exposed bitmap was disabled in the same transaction
that started the blockdev-backup job, although we don't want
to track enough state to actually enforce that).
However, consider the case of a bitmap contained in a read-only
node (including when the bitmap is found in a backing layer of
the active image). Because the node can't be modified, the
bitmap won't change due to writes, regardless of whether it is
still enabled. Forbidding the export unless the bitmap is
disabled is awkward, paritcularly since we can't change the
bitmap to be disabled (because the node is read-only).
Alternatively, consider the case of live storage migration,
where management directs the destination to create a writable
NBD server, then performs a drive-mirror from the source to
the target, prior to doing the rest of the live migration.
Since storage migration can be time-consuming, it may be wise
to let the destination include a dirty bitmap to track which
portions it has already received, where even if the migration
is interrupted and restarted, the source can query the
destination block status in order to potentially minimize
re-sending data that has not changed in the meantime on a
second attempt. Such code has not been written, and might not
be trivial (after all, a cluster being marked dirty in the
bitmap does not necessarily guarantee it has the desired
contents), but it makes sense that letting an active dirty
bitmap be exposed and changing alongside writes may prove
useful in the future.
Solve both issues by gating the restriction against a
disabled bitmap to only happen when the caller has requested
a read-only export, and where the BDS that owns the bitmap
(whether or not it is the BDS handed to nbd_export_new() or
from its backing chain) is still writable. We could drop
the check altogether (if management apps are prepared to
deal with a changing bitmap even on a read-only image), but
for now keeping a check for the read-only case still stands
a chance of preventing management errors.
Update iotest 223 to show the looser behavior by leaving
a bitmap enabled the whole run; note that we have to tear
down and re-export a node when handling an error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Since we already forbid other nbd-server commands when not
in the right state, it is unlikely that any caller was relying
on a second stop to behave as a silent no-op. Update iotest
223 to show the improved behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Testing success paths is important, but it's also nice to highlight
expected failure handling, to show that we don't crash, and so that
upcoming tests that change behavior can demonstrate the resulting
effects on error paths.
Add the following errors:
Attempting to export without a running server
Attempting to start a second server
Attempting to export a bad node name
Attempting to export a name that is already exported
Attempting to export an enabled bitmap
Attempting to remove an already removed export
Attempting to quit server a second time
All of these properly complain except for a second server-stop,
which will be fixed next.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
New interface, new smoke test.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181221093529.23855-12-jsnow@redhat.com>
[eblake: fix last-minute change to echo text]
Signed-off-by: Eric Blake <eblake@redhat.com>
If iotests have lines exceeding >998 characters long, git doesn't
want to send it plaintext to the list. We can solve this by allowing
the iotests to use pretty printed QMP output that we can match against
instead.
As a bonus, it's much nicer for human eyes too.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-11-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
As laid out in the previous commit's message:
```
Several places in iotests deal with serializing objects into JSON
strings, but to add pretty-printing it seems desirable to localize
all of those cases.
log() seems like a good candidate for that centralized behavior.
log() can already serialize json objects, but when it does so,
it assumes filters=[] operates on QMP objects, not strings.
qmp_log currently operates by dumping outgoing and incoming QMP
objects into strings and filtering them assuming that filters=[]
are string filters.
```
Therefore:
Change qmp_log to treat filters as if they're always qmp object filters,
then change the logging call to rely on log()'s ability to serialize QMP
objects, so we're not duplicating that effort.
Add a qmp version of filter_testfiles and adjust the only caller using
it for qmp_log to use the qmp version.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20181221093529.23855-10-jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Several places in iotests deal with serializing objects into JSON
strings, but to add pretty-printing it seems desirable to localize
all of those cases.
log() seems like a good candidate for that centralized behavior.
log() can already serialize json objects, but when it does so,
it assumes filters=[] operates on QMP objects, not strings.
qmp_log currently operates by dumping outgoing and incoming QMP
objects into strings and filtering them assuming that filters=[]
are string filters.
To have qmp_log use log's serialization, qmp_log will need to
accept only qmp filters, not text filters.
However, only a single caller of qmp_log actually requires any
filters at all. I remove the default filter and add it explicitly
to the caller in preparation for refactoring qmp_log to use rich
filters instead.
test 206 is amended to name the filter explicitly and the default
is removed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-9-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Python before 3.6 does not sort dictionaries (including kwargs).
Therefore, printing QMP objects involves sorting the keys to have
a predictable ordering in the iotests output. This means that
iotests output will sometimes show arguments in an order not
specified by the test author.
Presently, we accomplish this by using json.dumps' sort_keys argument,
where we only serialize the arguments dictionary, but not the command.
However, if we want to pretty-print QMP objects being sent to the
QEMU process, we need to build the entire command before logging it.
Ordinarily, this would then involve "arguments" being sorted above
"execute", which would necessitate a rather ugly and harder-to-read
change to many iotests outputs.
To facilitate pretty-printing AND maintaining predictable output AND
having "arguments" sort after "execute", add a custom sort function
that takes a dictionary and recursively builds an OrderedDict that
maintains the specific key order we wish to see in iotests output.
The qmp_log function uses this to build a QMP object that keeps
"execute" above "arguments", but sorts all keys and keys in any
subdicts in "arguments" lexicographically to maintain consistent
iotests output, with no incompatible changes to any current test.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-8-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To mimic the common filter of the same name, but for the python tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-7-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of using os.environ[], use .get with a default of empty string
to match the setup in check to allow us to import the iotests module
(for debugging, say) without needing a crafted environment just to
import the module.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-6-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'x' prefix was added because I was uncertain of the direction we'd
take for the libvirt API. With the general approach solidified, I feel
comfortable committing to this API for 4.0.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-5-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This changes output from:
$ qemu-nbd nosuch
Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory
to something more consistent with qemu-img and qemu:
$ qemu-nbd nosuch
qemu-nbd: Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory
Update the lone affected test to match. (Hmm - is it sad that we don't
do much testing of expected failures?)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181215135324.152629-2-eblake@redhat.com>
Reduce extra noise of nbd-client, change 083 correspondingly.
In various commits (be41c100 in 2.10, f140e300 in 2.11, 78a33ab
in 2.12), we added spots where qemu as an NBD client would report
problems communicating with the server to stderr, because there
was no where else to send the error to. However, this is racy,
particularly since the most common source of these errors is when
either the client or the server abruptly hangs up, leaving one
coroutine to report the error only if it wins (or loses) the
race in attempting the read from the server before another
thread completes its cleanup of a protocol error that caused the
disconnect in the first place. The race is also apparent in the
fact that differences in the flush behavior of the server can
alter the frequency of encountering the race in the client (see
commit 6d39db96).
Rather than polluting stderr, it's better to just trace these
situations, for use by developers debugging a flaky connection,
particularly since the real error that either triggers the abrupt
disconnection in the first place, or that results from the EIO
when a request can't receive a reply, DOES make it back to the
user in the normal Error propagation channels.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181102151152.288399-4-vsementsov@virtuozzo.com>
[eblake: drop depedence on error hint, enhance commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
It is interesting to know whether the shutdown cause was 'quit' or
'reset', especially when using "--no-reboot". In that case, a management
layer can now determine if the guest wanted a reboot or shutdown, and
can act accordingly.
Changes the output of the reason in the iotests from 'host-qmp' to
'host-qmp-quit'. This does not break compatibility because
the field was introduced in the same version.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-4-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This makes it possible to determine what the exact reason was for
a RESET or a SHUTDOWN. A management layer might need the specific reason
of those events to determine which cleanups or other actions it needs to do.
This patch also updates the iotests to the new expected output that includes
the reason.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Message-Id: <20181205110131.23049-3-d.csapak@proxmox.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
-----BEGIN PGP SIGNATURE-----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=XKq9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
# gpg: Signature made Fri 14 Dec 2018 10:55:09 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (42 commits)
block/mirror: add missing coroutine_fn annotations
iotests: make 235 work on s390 (and others)
block: Assert that flags are up-to-date in bdrv_reopen_prepare()
block: Remove assertions from update_flags_from_options()
block: Stop passing flags to bdrv_reopen_queue_child()
block: Remove flags parameter from bdrv_reopen_queue()
block: Clean up reopen_backing_file() in block/replication.c
qemu-io: Put flag changes in the options QDict in reopen_f()
block: Drop bdrv_reopen()
block: Use bdrv_reopen_set_read_only() in the mirror driver
block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
block: Use bdrv_reopen_set_read_only() in stream_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_commit()
block: Use bdrv_reopen_set_read_only() in commit_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename()
block: Add bdrv_reopen_set_read_only()
file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL
file-posix: Switch to .bdrv_co_ioctl
file-posix: Remove paio_submit_co()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"-machine pc" will not work all architectures. Lets fall back to the
default machine by not specifying it.
In addition we also need to specify -no-shutdown on s390 as qemu will
exit otherwise.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function takes four options (cache.direct, cache.no-flush,
read-only and auto-read-only) from a QemuOpts object and updates the
flags accordingly.
If any of those options is not set (because it was missing from the
original QDict or because it had an invalid value) then the function
aborts with a failed assertion:
$ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
block.c:1126: update_flags_from_options: Assertion `qemu_opt_find(opts, BDRV_OPT_CACHE_DIRECT)' failed.
Aborted
This assertion is unnecessary, and it forces any caller of
bdrv_reopen() to pass all the aforementioned four options. This may
have made sense in order to remove ambiguity when bdrv_reopen() was
taking both flags and options, but that's not the case anymore.
It's also unnecessary if we want to validate the option values,
because bdrv_reopen_prepare() already takes care of that, as we can
see if we remove the assertions:
$ qemu-io -c 'reopen -o read-only=foo' hd.qcow2
Parameter 'read-only' expects 'on' or 'off'
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When reopen_f() puts a block device in the reopen queue, some of the
new options are passed using a QDict, but others ("read-only" and the
cache options) are passed as flags.
This patch puts those flags in the QDict. This way the flags parameter
becomes redundant and we'll be able to get rid of it in a subsequent
patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test is broken without previous commit fixing dead-lock in mirror.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check that block node activation and inactivation works with a block
graph that is built with individually created nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The previous patch fixed the inherits_from pointer after block-stream,
and this one does the same for block-commit.
When block-commit finishes and the 'top' node is not the topmost one
from the backing chain then all nodes above 'base' up to and including
'top' are removed from the chain.
The bdrv_drop_intermediate() call converts a chain like this one:
base <- intermediate <- top <- active
into this one:
base <- active
In a simple scenario each backing file from the first chain has the
inherits_from attribute pointing to its parent. This means that
reopening 'active' will recursively reopen all its children, whose
options can be changed in the process.
However after the 'block-commit' call base.inherits_from is NULL and
the chain is broken, so 'base' does not inherit from 'active' and will
not be reopened automatically:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive if=none,file=hd2.qcow2
{ 'execute': 'block-commit',
'arguments': {
'device': 'none0',
'top': 'hd1.qcow2' } }
{ 'execute': 'human-monitor-command',
'arguments': {
'command-line':
'qemu-io none0 "reopen -o backing.l2-cache-size=2M"' } }
{ "return": "Cannot change the option 'backing.l2-cache-size'\r\n"}
This patch updates base.inherits_from in this scenario, and adds a
test case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a BlockDriverState's child is opened (be it a backing file, the
protocol layer, or any other) inherits_from is set to point to the
parent node. Children opened separately and then attached to a parent
don't have this pointer set.
bdrv_reopen_queue_child() uses this to determine whether a node's
children must also be reopened inheriting the options from the parent
or not. If inherits_from points to the parent then the child is
reopened and its options can be changed, like in this example:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 hd1.qcow2 1M
$ $QEMU -drive if=none,node-name=hd0,file=hd0.qcow2,\
backing.driver=qcow2,backing.file.filename=hd1.qcow2
(qemu) qemu-io hd0 "reopen -o backing.l2-cache-size=2M"
If the child does not inherit from the parent then it does not get
reopened and its options cannot be changed:
$ $QEMU -drive if=none,node-name=hd1,file=hd1.qcow2
-drive if=none,node-name=hd0,file=hd0.qcow2,backing=hd1
(qemu) qemu-io hd0 "reopen -o backing.l2-cache-size=2M"
Cannot change the option 'backing.l2-cache-size'
If a disk image has a chain of backing files then all of them are also
connected through their inherits_from pointers (i.e. it's possible to
walk the chain in reverse order from base to top).
However this is broken if the intermediate nodes are removed using
e.g. block-stream because the inherits_from pointer from the base node
becomes NULL:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive if=none,file=hd2.qcow2
(qemu) qemu-io none0 "reopen -o backing.l2-cache-size=2M"
(qemu) block_stream none0 0 hd0.qcow2
(qemu) qemu-io none0 "reopen -o backing.l2-cache-size=2M"
Cannot change the option 'backing.l2-cache-size'
This patch updates the inherits_from pointer if the intermediate nodes
of a backing chain are removed using bdrv_set_backing_hd(), and adds a
test case for this scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Testing granularity at the same size as the cluster isn't quite
as fun as what happens when it is larger or smaller. This
enhancement also shows that qemu's nbd server can serve the
same disk over multiple exports simultaneously.
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The first qemu-io command must honour the $IMGFMT that is set rather
than hardcoding qcow2. The qemu-nbd commands should also set $IMGFMT
to avoid the insecure format probe warning.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The use of TLS while building qemu is optional. While the
'certtool' binary should be available on every platform that
supports building against TLS, that does not imply that the
developer has installed it. Make the test gracefully skip
in that case.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
TestCase.assertEquals() is deprecated since Python 2.7. Recent Python
versions print a warning when the function is called, which makes test
cases fail.
Replace it with the preferred spelling assertEqual().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
time.clock() is deprecated since Python 3.3. Current Python versions
warn that the function will be removed in Python 3.8, and those warnings
make the test case 118 fail.
Replace it with the Timeout mechanism that is compatible with both
Python 2 and 3, and makes the code even a little nicer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Bash allows functions to be declared with or without the leading
keyword 'function'; but including the keyword does not comply with
POSIX syntax, and is confusing to ksh users where the use of the
keyword changes the scoping rules for functions. Stick to the
POSIX form through iotests.
Done mechanically with:
sed -i 's/^function //' $(git ls-files tests/qemu-iotests)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181116215002.2124581-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Enhance test 233 to also perform I/O beyond the initial handshake.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181118022403.2211483-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add tests that validate it is possible to connect to an NBD server
running TLS mode. Also test mis-matched TLS vs non-TLS connections
correctly fail.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-7-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to iotests shell cleanups, use ss instead of socat for
port probing, sanitize port number in expected output]
Signed-off-by: Eric Blake <eblake@redhat.com>
Add helpers to common.tls for creating TLS certificates for a CA,
server and client.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-6-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling and quoting touchups]
Signed-off-by: Eric Blake <eblake@redhat.com>
If the qemu-nbd UNIX socket has not shown up, the tests will sleep a bit
and then check again repeatedly for up to 30 seconds. This is pointless
if the qemu-nbd process has quit due to an error, so check whether the
pid is still alive before waiting and retrying.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-5-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The helpers for starting/stopping qemu-nbd in 058 will be useful in
other test cases, so move them into a common.nbd file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181116155325.22428-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix shell quoting]
Signed-off-by: Eric Blake <eblake@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using
$() everywhere. For now, just do the qemu-iotests directory.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-4-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
POSIX requires $PWD to be reliable, and we expect all
shells used by qemu scripts to be relatively close to
POSIX. Thus, it is smarter to avoid forking the pwd
executable for something that is already available in
the environment.
So replace it with the following:
sed -i 's/\(`pwd`\|\$(pwd)\)/$PWD/g' $(git grep -l pwd)
Then delete a pointless line assigning PWD to itself.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-2-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, tweak a couple more files]
Signed-off-by: Eric Blake <eblake@redhat.com>
Running
git grep '\$here' tests/qemu-iotests
has 0 hits, which means we are setting a variable that has
no use. It appears that commit e8f8624d removed the last
use. So execute the following cmd to remove all of
the 'here=...' lines as dead code.
sed -i '/^here=/d' $(git grep -l '^here=' tests/qemu-iotests)
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-3-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
If you have a capable file system (tmpfs is good, ext4 not so much;
run ./check with TEST_DIR pointing to a good location so as not
to skip the test), it's actually possible to create a qcow2 file
that expands to a sparse 512T image with just over 38M of content.
The test is not the world's fastest (qemu crawling through 256M
bits of refcount table to find the next cluster to allocate takes
several seconds, as does qemu-img check reporting millions of
leaked clusters); but it DOES catch the problem that the previous
patch just fixed where writing a compressed cluster to a full
image ended up overwriting the wrong cluster.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some whitespace into the option help (including indentation)
and puts angle brackets around the type names. Furthermore, the list
name is no longer printed as part of every line, but only once in
advance, and only if the caller did not print a caption already.
This patch also restores the description alignment we had before commit
9cbef9d68e, just at 24 instead of 16 characters like we used to.
This increase is because now we have the type and two spaces of
indentation before the description, and with a usual type name length of
three chracters, this sums up to eight additional characters -- which
means that we now need 24 characters to get the same amount of padding
for most options. Also, 24 is a third of 80, which makes it kind of a
round number in terminal terms.
Finally, this patch amends the reference output of iotest 082 to match
the changes (and thus makes it pass again).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch tests that you can add and remove drives from a Quorum
using the x-blockdev-change command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While testing the Python 3 changes which touch the 083 test, I noticed
that it would fail with qcow2. Expanding the testing, I noticed it
had nothing to do with the Python 3 changes, and in fact, it would not
pass on anything but raw:
raw: pass
bochs: not generic
cloop: not generic
parallels: fail
qcow: fail
qcow2: fail
qed: fail
vdi: fail
vhdx: fail
vmdk: fail
vpc: fail
luks: fail
The errors are a mixture I/O and "image not in xxx format", such as:
=== Check disconnect before data ===
Unexpected end-of-file before all bytes were read
-read failed: Input/output error
+can't open device nbd+tcp://127.0.0.1:PORT/foo: Could not open 'nbd://127.0.0.1:PORT/foo': Input/output error
=== Check disconnect after data ===
-read 512/512 bytes at offset 0
-512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+can't open device nbd+tcp://127.0.0.1:PORT/foo: Image not in qcow format
I'm not aware if there's a quick fix, so, for the time being, it looks
like the honest approach is to make the test known to work on raw
only.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When dumping an object into the log, there are differences between
Python 2 and 3. First, unicode strings are prefixed by 'u' in Python 2
(they are no longer in 3, because unicode strings are the default
there). Second, the order of keys in dicts may differ. Third,
especially long numbers are longs in Python 2 and thus get an 'L'
suffix, which does not happen in Python 3.
We can get around all of these differences by dumping objects (lists and
dicts) in a language-independent format, namely JSON. The JSON
generator even allows emitting dicts with their keys sorted
alphabetically.
This changes the output of all tests that use these logging functions
(dict keys are ordered now, strings in dicts are now enclosed in double
quotes instead of single quotes, the 'L' suffix of large integers is
dropped, and "true" and "false" are now in lower case).
The quote change necessitates a small change to a filter used in test
207.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-10-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There are two imports that need to be modified when running the iotests
under Python 3: One is StringIO, which no longer exists; instead, the
StringIO class comes from the io module, so import it from there (and
use the BytesIO class for Python 2). The other is the ConfigParser,
which has just been renamed to configparser.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-9-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
iotest 169 uses the 'new' module to add methods to a class. This module
no longer exists in Python 3. Instead, we can use a lambda. Best of
all, this works in 2.7 just as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-8-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Python 3.4 introduced the inheritable attribute for FDs. At the same
time, it changed the default so that all FDs are not inheritable by
default, that only inheritable FDs are inherited to subprocesses, and
only if close_fds is explicitly set to False.
Adhere to this by setting close_fds to False when working with
subprocesses that may want to inherit FDs, and by trying to
set_inheritable() on FDs that we do want to bequeath to them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-7-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In Python 3, several functions now return iterators instead of lists.
This includes range(), items(), map(), and filter(). This means that if
we really want a list, we have to wrap those instances with list(). But
then again, the two instances where this is the case for map() and
filter(), there are shorter expressions which work without either
function.
On the other hand, sometimes we do just want an iterator, in which case
we have sometimes used xrange() and iteritems() which no longer exist in
Python 3. Just change these calls to be range() and items(), works in
both Python 2 and 3, and is really what we want in 3 (which is what
matters). But because it is so simple to do (and to find and remove
once we completely switch to Python 3), make range() be an alias for
xrange() in the two affected tests (044 and 163).
In one instance, we only wanted the first instance of the result of a
filter() call. Instead of using next(filter()) which would work only in
Python 3, or list(filter())[0] which would work everywhere but is a bit
weird, this instance is changed to use a generator expression with a
next() wrapped around, which works both in 2.7 and 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-6-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In Python 3, / is always a floating-point division. We usually do not
want this, and as Python 2.7 understands // as well, change all integer
divisions to use that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-5-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since byte strings are no longer the default in Python 3, we have to
explicitly use them where we need to, which is mostly when working with
structures. It also means that we need to open a file in binary mode
when we want to use structures.
On the other hand, we have to accomodate for the fact that some
functions (still) work with byte strings but we want to use unicode
strings (in Python 3 at least, and it does not matter in Python 2).
This includes base64 encoding, but it is most notable when working with
the subprocess module: Either we set universal_newlines to True so that
the default streams are opened in text mode (hence this parameter is
aliased as "text" as of 3.7), or, if that is not possible, we have to
decode the output to a normal string.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20181022135307.14398-4-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
After issuing a command, flush the pipe. This does not change anything
in Python 2, but it makes a difference in Python 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181022135307.14398-3-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When closing a connection, make the nbd-fault-injector flush the socket.
Without this, the output is a bit unreliable with Python 3.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181022135307.14398-2-mreitz@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that we can resume source vm after [failed] migration, and bitmaps
are ok.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Before previous patch, iotest 169 was actually broken for the case
test_persistent__not_migbitmap__offline_shared, while formally
passing.
After migration log of vm_b had message:
qemu-system-x86_64: Could not reopen qcow2 layer: Bitmap already
exists: bitmap0
which means that invalidation failed and bs->drv = NULL.
It was because we've loaded bitmap twice: on open and on invalidation.
Add code to 169, to catch such fails.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Fix also a grammar issue.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180713054755.23323-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 990dc39c made all tests executable at the time, but 218 came in
later, and missing those permissions.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181004161852.11673-4-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit cce293a294 moved some functions from common.config to
common.rc, but the error messages still reference the old file
location.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181004161852.11673-5-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
bdrv_img_create() takes an Error ** argument and uses it in the
conventional way, except for one place: when qemu_opts_do_parse()
fails, it first reports its error to stderr or the HMP monitor with
error_report_err(), then error_setg()'s a generic error.
When the caller reports that second error similarly, this produces two
consecutive error messages on stderr or the HMP monitor.
When the caller does something else with it, such as send it via QMP,
the first error still goes to stderr or the HMP monitor. Fortunately,
no such caller exists.
Simply use the first error as is. Update expected output of
qemu-iotest 049 accordingly.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-37-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Currently, the default values for werror and rerror have to be set
explicitly with blk_set_on_error() by the callers of blk_new(). The only
caller actually doing this is blockdev_init(), which is called for
BlockBackends created using -drive.
In particular, anonymous BlockBackends created with
-device ...,drive=<node-name> didn't get the correct default set and
instead defaulted to the integer value 0 (= BLOCKDEV_ON_ERROR_REPORT).
This is the intended default for rerror anyway, but the default for
werror should be BLOCKDEV_ON_ERROR_ENOSPC.
Set the defaults in blk_new() instead so that they apply no matter what
way the BlockBackend was created.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.
Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.
Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image locking errors happening at device initialization time doesn't say
which file cannot be locked, for instance,
-device scsi-disk,drive=drive-1: Failed to get shared "write" lock
Is another process using the image?
could refer to either the overlay image or its backing image.
Hoist the error_append_hint to the caller of raw_check_lock_bytes where
file name is known, and include it in the error hint.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We just fixed a bug that was causing a use-after-free when QEMU was
unable to create a temporary snapshot. This is a test case for this
scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some tests for block-commit with the new options top-node and
base-node (taking node names) instead of top and base (taking file
names).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a small test that will check for the ability to parse
both legacy and modern options for rbd.
The way the test is set up is for failure to occur, but without
having to wait to timeout on a non-existent rbd server. The error
messages in the success path show that the arguments were parsed.
The failure behavior prior to the patch series that has this test, is
qemu-img complaining about mandatory options (e.g. 'pool') not being
provided.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: f830580e339b974a83ed4870d11adcdc17f49a47.1536704901.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
blockdev-mirror with the same node for source and target segfaults
today: A node is in its own backing chain, so mirror_start_job() decides
that this is an active commit. When adding the intermediate nodes with
block_job_add_bdrv(), it starts the iteration through the subchain with
the backing file of source, though, so it never reaches target and
instead runs into NULL at the base.
While we could fix that by starting with source itself, there is no
point in allowing mirroring a node into itself and I wouldn't be
surprised if this caused more problems later.
So just check for this scenario and error out.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The previous patch fixes a problem in which draining a block device
with more than one throttled request can make it wait first for the
completion of requests in other members of the same group.
This patch updates test_remove_group_member() in iotest 093 to
reproduce that scenario. This updated test would hang QEMU without the
fix from the previous patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A throttle group can have several members, and each one of them can
have several pending requests in the queue.
The requests are processed in a round-robin fashion, so the algorithm
decides the drive that is going to run the next request and sets a
timer in it. Once the timer fires and the throttled request is run
then the next drive from the group is selected and a new timer is set.
If the user tried to remove a drive from a group and that drive had a
timer set then the code was not taking care of setting up a new timer
in one of the remaining members of the group, freezing their I/O.
This problem was fixed in 6fccbb475b,
and this patch adds a new test case that reproduces this exact
scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make sure that query-blockstats returns information for every
BlockBackend that is named or attached to a device model (or both).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On my system (Fedora 28), this script reports a 'failed to get
"consistent read" lock' error. Following docs/devel/testing.rst, it's
better to add locking=off here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
223 tests persistent dirty bitmaps which are not supported in
compat=0.10, so that option is unsupported for this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test directory should be filtered before the image format, otherwise
the test will fail if the image format is part of the test directory,
like so:
[...]
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+can't open: Could not open '/tmp/test-IMGFMT/t.IMGFMT': Is a directory
[...]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test doesn't actually care about the format anyway, it just
supports "all formats" as a convenience. LUKS however does not use a
simple image filename which confuses this iotest.
We can simply skip the test for formats that use IMGOPTSSYNTAX for
their filenames without missing much coverage.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test case uses block devices with driver=file, which causes the test
to fail after commit 230ff73904 added a deprecation warning for this.
Fix the test case to use driver=host_device and update the reference
output accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We currently don't enforce that the sparse segments we detect during convert are
aligned. This leads to unnecessary and costly read-modify-write cycles either
internally in Qemu or in the background on the storage device as nearly all
modern filesystems or hardware have a 4k alignment internally.
This patch modifies is_allocated_sectors so that its *pnum result will always
end at an alignment boundary. This way all requests will end at an alignment
boundary. The start of all requests will also be aligned as long as the results
of get_block_status do not lead to an unaligned offset.
The number of RMW cycles when converting an example image [1] to a raw device that
has 4k sector size is about 4600 4k read requests to perform a total of about 15000
write requests. With this path the additional 4600 read requests are eliminated while
the number of total write requests stays constant.
[1] https://cloud-images.ubuntu.com/releases/16.04/release/ubuntu-16.04-server-cloudimg-amd64-disk1.vmdk
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that we're rejecting what we ought to for file,
host_driver and host_cdrom drivers. Test that we're
seeing the deprecated message for block and chardevs
on the file driver.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
197 is one example where _make_test_img is used twice without stopping
the NBD server in between. An error will occur like this:
@@ -26,9 +26,13 @@
=== Partial final cluster ===
+qemu-img: TEST_DIR/t.IMGFMT: Failed to get "resize" lock
+Is another process using the image?
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1024
+Failed to find an available port: Address already in use
read 1024/1024 bytes at offset 0
Patch _make_test_img to stop the old qemu-nbd before starting a new one,
which fixes this problem, and similarly 215.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This step was left behind my mistake. As suggested by the echoed text,
the intention was to test two devices with the same image, with
different options. The behavior should be the same as two QEMU
processes. Complete it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Luks needs special parameters to operate the image. Since this test is
focusing on image fleecing, skip skip that format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the virtual disk size isn't aligned to full clusters,
bdrv_co_do_copy_on_readv() may get pnum == 0 before having the full
cluster completed, which will let it run into an assertion failure:
qemu-io: block/io.c:1203: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Check for EOF, assert that we read at least as much as the read request
originally wanted to have (which is true at EOF because otherwise
bdrv_check_byte_request() would already have returned an error) and
return success early even though we couldn't copy the full cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that VMDK backing file reads fail when the
backing file has a non-matching CID. This includes non-VMDK backing
files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180702210721.4847-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the user passes a too long node name string, we silently truncate it
to fit into BlockDriverState.node_name, i.e. to 31 characters. Apart
from surprising the user when the node has a different name than
requested, this also bypasses the check for duplicate names, so that the
same name can be assigned to multiple nodes.
Fix this by just making too long node names an error.
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Although this test is NOT a full test of image fleecing (as it
intentionally uses just a single block device directly exported
over NBD, rather than trying to set up a blockdev-backup job with
multiple BDS involved), it DOES prove that qemu as a server is
able to properly expose a dirty bitmap over NBD.
When coupled with image fleecing, it is then possible for a
third-party client to do an incremental backup by using
qemu-img map with the x-dirty-bitmap option to learn which parts
of the file are dirty (perhaps confusingly, they are the portions
mapped as "data":false - which is part of the reason this is
still in the x- experimental namespace), along with another
normal client (perhaps 'qemu-nbd -c' to expose the server over
/dev/nbd0 and then just use normal I/O on that block device) to
read the dirty sections.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-3-eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20180702194630.9360-3-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In my Out-Of-Band test, "check -qcow2 060" fail with this:
--- /home/peterx/git/qemu/tests/qemu-iotests/060.out
+++ /home/peterx/git/qemu/bin/tests/qemu-iotests/060.out.bad
@@ -427,8 +427,8 @@
QMP_VERSION
{"return": {}}
qcow2: Image is corrupt: L2 table offset 0x2a2a2a00 unaligned (L1
index: 0); further non-fatal corruption events will be suppressed
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_IMAGE_CORRUPTED", "data": {"device": "", "msg": "L2 table offset 0x2a2a2a0
0 unaligned (L1 index: 0)", "node-name": "drive", "fatal": false}}
read failed: Input/output error
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_IMAGE_CORRUPTED", "data": {"device": "", "msg": "L2 table offset 0x2a2a2a0
0 unaligned (L1 index: 0)", "node-name": "drive", "fatal": false}}
{"return": ""}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP},
"event": "SHUTDOWN", "data": {"guest": false}}
The order of the event and the in/out error line is swapped. I didn't
dig up the reason, but AFAIU what we want to verify is the event rather
than stderr. Let's drop the stderr line directly for this test.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180620073223.31964-5-peterx@redhat.com>
[Commit message touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Not updating src_offset will result in wrong data being written to dst
image.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for a temporary write failure, which simulates the
situation after werror=stop/enospc has stopped the VM. We shouldn't
leave leaked clusters behind in such cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Commit abf754fe40 updated 026.out, but forgot to also update
026.out.nocache.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Although qemu-img creates aligned files (by rounding up), it
must also gracefully handle files that are not sector-aligned.
Test that the bug fixed in the previous patch does not recur.
It's a bit annoying that we can see the (implicit) hole past
the end of the file on to the next sector boundary, so if we
ever reach the point where we report a byte-accurate size rather
than our current behavior of always rounding up, this test will
probably need a slight modification.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It has been marked as deprecated since QEMU v2.0 already, so it
is time now to finally remove it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1528288551-31641-1-git-send-email-thuth@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
219 has two issues that may lead to sporadic failure, both of which are
the result of issuing query-jobs too early after a job has been
modified. This can then lead to different results based on whether the
modification has taken effect already or not.
First, query-jobs is issued right after the job has been created.
Besides its current progress possibly being in any random state (which
has already been taken care of), its total progress too is basically
arbitrary, because the job may not yet have been able to determine it.
This patch addresses this by just filtering the total progress, like
what has been done for the current progress already. However, for more
clarity, the filtering is changed to replace the values by a string
'FILTERED' instead of deleting them.
Secondly, query-jobs is issued right after a job has been resumed. The
job may or may not yet have had the time to actually perform any I/O,
and thus its current progress may or may not have advanced. To make
sure it has indeed advanced (which is what the reference output already
assumes), keep querying it until it has.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606190628.8170-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's possible, that job was finished during waiting. In this case we
will see error message "Timeout waiting for job to pause" which is not
very informative. So, let's check during waiting iteration that the job
exists.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180601115923.17159-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds a test case to 122 for what happens when you convert to a
target with a backing file that is shorter than the target, and the
image format does not support efficient zero writes (as is the case with
qcow2 v2).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501165750.19242-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509182002.8044-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
As a showcase of how you can use qemu-io's exit code to determine
success or failure (same for qemu-img), this test is changed to use
qemu_io_silent() instead of qemu_io(), and to assert the exit code
instead of logging the filtered result.
One real advantage of this is that in case of an error, you get a
backtrace that helps you locate the issue in the test file quickly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With qemu-io now returning a useful exit code, some tests may find it
sufficient to just query that instead of logging (and filtering) the
whole output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509194302.21585-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds a test for an I/O error during snapshot deletion, and maybe
more importantly, for how to repair the resulting image. If the
snapshot has been deleted before the error occurs, the only negative
result will be leaked clusters -- and those should be repairable with
qemu-img check -r leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509200059.31125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test case has been broken since 398e6ad014 (roughly half a
year). qemu-img amend requires its output image to be R/W, so it opens
it as such; the node is then turned into an read-only node automatically
which is now accompanied by a warning, however. This warning has not
been part of the reference output.
For one thing, this warning shows that we cannot keep the test case as
it is. We would need a format that has no create_opts but that does
have write support -- we do not have such a format, though.
Another thing is that qemu now actually checks whether an image format
supports amendment instead of whether it has create_opts (since the
former always implies the latter). So we can now use any format that
does not support amendment (even if it supports creation) and thus test
the same code path.
The reason nobody has noticed the breakage until now of course is the
fact that nobody runs the iotests for nbd+bochs. There actually was
never any reason to set the protocol to "nbd" but because that was
technically correct; functionally it made no difference. So that is the
first thing we are going to change: Make the protocol "file" instead so
that people might actually notice breakage here.
Secondly, now that bochs no longer works for the amend test case, we
have to change the format there anyway. Set let us just bend the truth
a bit, declare this test a raw test. In fact, that does not even
concern the bochs test cases, other than the output now reading 'bochs'
instead of 'IMGFMT'.
So with this test now being a raw test, we can rework the amend test
case to use raw instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180509210023.20283-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds test cases to 082 for qemu-img create/convert/amend "-o help"
on formats that do not support creation or amendment, respectively.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The more generic print_block_option_help() function is not really
suitable for qemu-img amend, for a couple of reasons:
(1) We do not need to append the protocol-level options, as amendment
happens only on one node and does not descend downwards to its
children.
(2) print_block_option_help() says those options are "supported". For
option amendment, we do not really know that. So this new function
explicitly says that those options are the creation options, and not
all of them may be supported.
(3) If the driver does not support option amendment, we should not print
anything (except for an error message that amendment is not
supported).
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1537956
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509210023.20283-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Looking at the qcow2 code that is riddled with error_report() calls,
this is really how it should have been from the start.
Along the way, turn the target_version/current_version comparisons at
the beginning of qcow2_downgrade() into assertions (the caller has to
make sure these conditions are met), and rephrase the error message on
using compat=1.1 to get refcount widths other than 16 bits.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509210023.20283-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a test case to 153 which tries to overwrite an image
(using qemu-img create) while it is in use. Without the original user
explicitly sharing the necessary permissions (writing and truncation),
this should not be allowed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180509215336.31304-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit d759c951f3 ("replay: push
replay_mutex_lock up the call tree") removed the !timeout lock
optimization in the main loop.
The idea of the optimization was to avoid ping-pongs between threads by
keeping the Big QEMU Lock held across non-blocking (!timeout) main loop
iterations.
A warning is printed when the main loop spins without releasing BQL for
long periods of time. These warnings were supposed to aid debugging but
in practice they just alarm users. They are considered noise because
the cause of spinning is not shown and is hard to find.
Now that the lock optimization has been removed, there is no danger of
hogging the BQL. Drop the spin counter and the infamous warning.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
We're ready to declare the blockdev-create job stable. This renames the
corresponding QMP command from x-blockdev-create to blockdev-create.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This rewrites the test case 213 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This rewrites the test case 212 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This rewrites the test case 211 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This rewrites the test case 210 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This rewrites the test case 207 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
Most of the test cases stay the same as before (the exception being some
improved 'size' options that allow distinguishing which command created
the image), but in order to be able to implement proper job handling,
the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This rewrites the test case 206 to work with the new x-blockdev-create
job rather than the old synchronous version of the command.
All of the test cases stay the same as before, but in order to be able
to implement proper job handling, the test case is rewritten in Python.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds two helper functions that are useful for test cases that make
use of a non-file protocol (specifically ssh).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Add an iotests.py function that runs a job and only returns when it is
destroyed. An error is logged when the job failed and job-finalize and
job-dismiss commands are issued if necessary.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This adds a filter function to postprocess 'qemu-img info' input
(similar to what _img_info does), and an img_info_log() function that
calls 'qemu-img info' and logs the filtered output.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This adds a helper function that logs both the QMP request and the
received response before returning it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds a helper function that returns a list of QMP events that are
already filtered through filter_qmp_event().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This changes the x-blockdev-create QMP command so that it doesn't block
the monitor and the main loop any more, but starts a background job that
performs the image creation.
The basic job as implemented here is all that is necessary to make image
creation asynchronous and to provide a QMP interface that can be marked
stable, but it still lacks a few features that jobs usually provide: The
job will ignore pause commands and it doesn't publish more than very
basic progress yet (total-progress is 1 and current-progress advances
from 0 to 1 when the driver callbacks returns). These features can be
added later without breaking compatibility.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
qmp_to_opts() used to be a method of QMPTestCase, but recently we
started to add more Python test cases that don't make use of
QMPTestCase. In order to make the method usable there, move it to VM.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds a QMP event that is emitted whenever a job transitions from
one status to another.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
185 and 191 define a MIG_SOCKET even though they don't do anything with
migration. Remove the useless variable.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
grep for "migrate" turns up a few test cases which use migration, but
haven't been in the "migration" group so far. Add them to the group.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
The reference output file only works for file. 'qemu-img convert -p'
makes a lot more progress updates for NFS than for file, so disable the
test for NFS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
NFS paths were only partially filtered in _filter_img_create, _img_info
and _filter_img_info, resulting in "nfs://127.0.0.1TEST_DIR/t.IMGFMT".
This adds another replacement to the sed calls that matches the test
directory not as a host path, but as an NFS URL (the prefix as used for
$TEST_IMG).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Test cases were trying to use nfs:// URLs as local filenames, which made
every test fail for NFS. With TEST_IMG and TEST_IMG_FILE set like for
the other protocols, NFS tests can pass again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Currently the timer is cancelled and the block job is entered by
block_job_resume(). This behavior causes drain to run extra blockjob
iterations when the job was sleeping due to the ratelimit.
This patch leaves the job asleep when block_job_resume() is called.
Jobs can still be forcibly woken up using block_job_enter(), which is
used to cancel jobs.
After this patch drain no longer runs extra blockjob iterations. This
is the expected behavior that qemu-iotests 185 used to rely on. We
temporarily changed the 185 test output to make it pass for the QEMU
2.12 release but now it's time to address this issue.
Cc: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Message-id: 20180508135436.30140-3-stefanha@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit 8565c3ab53 ("qemu-iotests: fix
185") identified a race condition in a sub-test.
Similar issues also affect the other sub-tests. If disk I/O completes
quickly, it races with the QMP 'quit' command. This causes spurious
test failures because QMP events are emitted in an unpredictable order.
This test relies on QEMU internals and there is no QMP API for getting
deterministic behavior needed to make this test 100% reliable. At the
same time, the test is useful and it would be a shame to remove it.
Add sleep 0.5 to reduce the chance of races. This is not a real fix but
appears to reduce spurious failures in practice.
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180508135436.30140-2-stefanha@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
COR across nodes (that is, you have some filter node between the
actually COR target and the node that performs the COR) cannot reliably
work together with the permission system when there is no explicit COR
node that can request the WRITE_UNCHANGED permission for its child.
This is because COR (currently) sneaks its requests by the usual
permission checks, so it can work without a WRITE* permission; but if
there is a filter node in between, that will re-issue the request, which
then passes through the usual check -- and if nobody has requested a
WRITE_UNCHANGED permission, that check will fail.
There is no real direct fix apart from hoping that there is someone who
has requested that permission; in case of just the qemu-io HMP command
(and no guest device), however, that is not the case. The real real fix
is to implement the copy-on-read flag through an implicitly added COR
node. Such a node can request the necessary permissions as shown in
this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-10-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotest 197 tests copy-on-read using the (now old) copy-on-read flag.
Copy it to 215 and modify it to use the COR filter driver instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-9-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-8-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
userfaultfd support depends on the host kernel, so it may not be
available. If so, 181 and 201 should be skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406151731.4285-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, common.qemu only allows to match for results indicating
success. The only way to fail is by provoking a timeout. However,
sometimes we do have a defined failure output and can match for that,
which saves us from having to wait for the timeout in case of failure.
Because failure can sometimes just result in a _notrun in the test, it
is actually important to care about being able to fail quickly.
Also, sometimes we simply do not get any specific output in case of
success. The only way to handle this currently would be to define an
error message as the string to look for, which means that actual success
results in a timeout. This is really bad because it unnecessarily slows
down a succeeding test.
Therefore, this patch adds a new parameter $success_or_failure to
_timed_wait_for and _send_qemu_cmd. Setting this to a non-empty string
makes both commands expect two match parameters: If the first matches,
the function succeeds. If the second matches, the function fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406151731.4285-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The L2 and refcount caches have default sizes that can be overridden
using the l2-cache-size and refcount-cache-size (an additional
parameter named cache-size sets the combined size of both caches).
Unless forced by one of the aforementioned parameters, QEMU will set
the unspecified sizes so that the L2 cache is 4 times larger than the
refcount cache.
This is based on the premise that the refcount metadata needs to be
only a fourth of the L2 metadata to cover the same amount of disk
space. This is incorrect for two reasons:
a) The amount of disk covered by an L2 table depends solely on the
cluster size, but in the case of a refcount block it depends on
the cluster size *and* the width of each refcount entry.
The 4/1 ratio is only valid with 16-bit entries (the default).
b) When we talk about disk space and L2 tables we are talking about
guest space (L2 tables map guest clusters to host clusters),
whereas refcount blocks are used for host clusters (including
L1/L2 tables and the refcount blocks themselves). On a fully
populated (and uncompressed) qcow2 file, image size > virtual size
so there are more refcount entries than L2 entries.
Problem (a) could be fixed by adjusting the algorithm to take into
account the refcount entry width. Problem (b) could be fixed by
increasing a bit the refcount cache size to account for the clusters
used for qcow2 metadata.
However this patch takes a completely different approach and instead
of keeping a ratio between both cache sizes it assigns as much as
possible to the L2 cache and the remainder to the refcount cache.
The reason is that L2 tables are used for every single I/O request
from the guest and the effect of increasing the cache is significant
and clearly measurable. Refcount blocks are however only used for
cluster allocation and internal snapshots and in practice are accessed
sequentially in most cases, so the effect of increasing the cache is
negligible (even when doing random writes from the guest).
So, make the refcount cache as small as possible unless the user
explicitly asks for a larger one.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 9695182c2eb11b77cb319689a1ebaa4e7c9d6591.1523968389.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit abd3622cc0 added a case to 122
regarding how the qcow2 driver handles an incorrect compressed data
length value. This does not really fit into 122, as that file is
supposed to contain qemu-img convert test cases, which this case is not.
So this patch splits it off into its own file; maybe we will even get
more qcow2-only compression tests in the future.
Also, that test case does not work with refcount_bits=1, so mark that
option as unsupported.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180406164108.26118-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We already have an extensive mirror test (041) which does cover
cancelling a mirror job, especially after it has emitted the READY
event. However, it does not check what exact events are emitted after
block-job-cancel is executed. More importantly, it does not use
throttling to ensure that it covers the case of block-job-cancel before
READY.
It would be possible to add this case to 041, but considering it is
already our largest test file, it makes sense to create a new file for
these cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501220509.14152-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit b76e4458b1 ("block/mirror: change
the semantic of 'force' of block-job-cancel") accidentally removed the
ratelimit in the mirror job.
Reintroduce the ratelimit but keep the block-job-cancel force=true
behavior that was added in commit
b76e4458b1.
Note that block_job_sleep_ns() returns immediately when the job is
cancelled. Therefore it's safe to unconditionally call
block_job_sleep_ns() - a cancelled job does not sleep.
This commit fixes the non-deterministic qemu-iotests 185 output. The
test relies on the ratelimit to make the job sleep until the 'quit'
command is processed. Previously the job could complete before the
'quit' command was received since there was no ratelimit.
Cc: Liang Li <liliang.opensource@gmail.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180424123527.19168-1-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Improve and fix 169:
- use MIGRATION events instead of RESUME
- make a TODO: enable dirty-bitmaps capability for offline case
- recreate vm_b without -incoming near test end
This (likely) fixes racy faults at least of the following types:
- timeout on waiting for RESUME event
- sha256 mismatch on line 136 (142 after this patch)
- fail to self.vm_b.launch() on line 135 (141 now after this patch)
And surely fixes cat processes, left after test finish.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180411122606.367301-3-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 4486e89c21 ("vl: introduce
vm_shutdown()") added a bdrv_drain_all() call. As a side-effect of the
drain operation the block job iterates one more time than before. The
185 output no longer matches and the test is failing now.
It may be possible to avoid the superfluous block job iteration, but
that type of patch is not suitable late in the QEMU 2.12 release cycle.
This patch simply updates the 185 output file. The new behavior is
correct, just not optimal, so make the test pass again.
Fixes: 4486e89c21 ("vl: introduce vm_shutdown()")
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-iotests doesn't support dmg, and the dmg block driver doesn't
support image creation. Two test cases declare dmg as supported, but
that's obviously wrong for both reasons. Remove the declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Blacklist these formats, as they don't support image creation, as they
say:
> ./qemu-img create -f bochs x 1m
qemu-img: x: Format driver 'bochs' does not support image creation
> ./qemu-img create -f cloop x 1m
qemu-img: x: Format driver 'cloop' does not support image creation
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support "generic" formats like in bash tests with their
_supported_fmt generic
The test, supporting "generic" formats will run if IMGFMT_GENERIC =
true, which is default, except for bochs and cloop. However, you can
use verify_image_format(['generic', 'bochs']), which will run for all
except cloop (for this moment).
Also, add an assert (we don't want set both arguments) and remove
duplication.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If there are more than one events, wait_until_completed() might return
the 2nd event even if the 1st event is JOB_COMPLETED, since the for loop
will continue to run even if completed is set to True.
It never happened before, but it can be triggered when OOB is enabled
due to the RESUME startup message. Fix that up.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180408030542.17855-1-peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaw6CJAAoJEPQH2wBh1c9AZvcIAL51TsxzLBfYbEr7t/OqaYcT
KptgkLn8UPUsVwEaZ1i9T+qpPqUhCgUeqBki4wTpGOfwmRO633L81lhlvLU1RD5f
a9qsIWtvG0eYw+BU4P+ojltufdeQRQMxuLVhoiq2ur9vC8zUy6tEnF+yqOdWHYsm
83Z2T/NFZ192zIwPD3Rq9/+ijllJOhODrHdAcnwBp0IuvlXi5FV7GjccB4scW/Ym
LwDe7cNWv0XlzRlosyhTRs0HiOm+XiLAj5t9dVKFiuZsUwGFEXx6GiRtUutDf1j8
5ham2wiYLsvxnSgRoUk486Txuj2ceNYDOvnllSv3uFh2kZyTaYewOL1acQFmtVw=
=5AX/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-2018-04-03' into queue-block
A fix for preallocated truncation, a new iotest, and a fix to make the iotests work more comfortably on ppc64
# gpg: Signature made Tue Apr 3 17:40:57 2018 CEST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2018-04-03:
iotests: Test abnormally large size in compressed cluster descriptor
qemu-iotests: Use ppc64 qemu_arch on ppc64le host
iotests: Test preallocated truncate of 2G image
block/file-posix: Fix fully preallocated truncate
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
L2 entries for compressed clusters have a field that indicates the
number of sectors used to store the data in the image.
That's however not the size of the compressed data itself, just the
number of sectors where that data is located. The actual data size is
usually not a multiple of the sector size, and therefore cannot be
represented with this field.
The way it works is that QEMU reads all the specified sectors and
starts decompressing the data until there's enough to recover the
original uncompressed cluster. If there are any bytes left that
haven't been decompressed they are simply ignored.
One consequence of this is that even if the size field is larger than
it needs to be QEMU can handle it just fine: it will read more data
from disk but it will ignore the extra bytes.
This test creates an image with two compressed clusters that use 5
sectors (2.5 KB) each, increases the size field to the maximum (8192
sectors, or 4 MB) and verifies that the data can be read without
problems.
This test is important because while the decompressed data takes
exactly one cluster, the maximum value allowed in the compressed size
field is twice the cluster size. So although QEMU won't produce images
with such large values we need to make sure that it can handle them.
Another effect of increasing the size field is that it can make
it include data from the following host cluster(s). In this case
'qemu-img check' will detect that the refcounts are not correct, and
we'll need to rebuild them.
Additionally, this patch also tests that decreasing the size corrupts
the image since the original data can no longer be recovered. In this
case QEMU returns an error when trying to read the compressed data,
but 'qemu-img check' doesn't see anything wrong if the refcounts are
consistent.
One possible task for the future is to make 'qemu-img check' verify
the sizes of the compressed clusters, by trying to decompress the data
and checking that the size stored in the L2 entry is correct.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180329120745.11154-1-berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The qemu target does not always correspond to the host machine type. For
example ppc64le machine target is ppc64. Let's introduce "qemu_arch"
variable to store the matching qemu architecture related to the current
architecture and use it when auto-detecting the default qemu binary.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Message-id: 20180329112053.5399-2-ldoktor@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180228131315.30194-3-mreitz@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Support luks images creatins like in 205
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eric Blake
Thomas Huth
Max Reitz
Alberto Garcia
Vladimir Sementsov-Ogievskiy
Lukáš Doktor
Kevin Wolf
Sergio Lopez
Peter Maydell
John Snow
Philippe Mathieu-Daudé
Andrey Shinkevich
Stefan Hajnoczi
Daniel P. Berrange
Cleber Rosa
Fam Zheng
yuchenlin
Dominik Csapak
Christian Borntraeger
Markus Armbruster
Mao Zhongyi
Stefan Weil
Leonid Bloch
Jeff Cody
Peter Lieven
Peter Xu
Eduardo Habkost