Roll the code used to initialize the guest memory space when -R
or -B is used into 'init_guest_space' and then call 'init_guest_space'
from the driver. This way the reserved guest memory space can
be probed for. Calling 'mmap' just once as is currently done is not
guaranteed to succeed since the host address space validation might fail.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
[PMM: Fixed minor whitespace errors.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current bss clear logic assumes the target mmap address and host
address are the same. Use g2h to translate from the target address
space to the host so we can call memset on it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code to initialise the target_to_host_errno_table[] array was
accidentally inside the loop through checking and initialising all
the supported ioctls. This was harmless but meant that we reinitialised the
array several hundred times on startup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the SNDCTL_DSP_MAP{IN,OUT}BUF ioctl definitions so that they
refer to a suitably defined target struct layout rather than hardcoding
the ioctl number. This fixes complaints from the syscall_init()
consistency check when running an x86_64-to-x86_64 linux-user qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definitions for the ioctl numbers TARGET_BLKBSZGET and
TARGET_BLKBSZSET had the wrong size parameters (they are defined
with size_t, not int, even though the ioctl implementations themselves
read and write integers). Since commit 354a0008 we now have an
ioctl wrapper definition for BLKBSZGET and so on an x86-64-to-x86-64
linux-user binary we were triggering the mismatch warning in
syscall_init().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch initializes the cpuid to exactly correct value because
linux kernel will check it.
In addition, the exception types are specified in proper situations.
Then it could make exceptions generated correctly and timely.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.
Fix by implementing the earlier statement which initializes the variable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alpha uses unbiased priority values in the syscall, with the a3
return value signaling error conditions. Therefore, properly
interpret the libc getpriority as needed for the guest rather
than passing the host value through unchanged.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Name the syscall properly for QEMU, kernel source notwithstanding.
Fix syntax errors in the code thus enabled within do_syscall.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If we let the kernel handle the implementation of mmap_find_vma,
via an anon mmap, we must use the size as indicated by the user
and not the size truncated to the filesize.
This happens often in ld.so, where we initially mmap the file to
the size of the text+data+bss to reserve an area, then mmap+fixed
over the top to properly handle data and bss.
Signed-off-by: Richard Henderson <rth@twiddle.net>
For each target, only define the bits that appear in
arch/target/include/asm/fcntl.h. Mirror the kernel's
asm-generic layout by handling anything undefined afterward.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We weren't aggregating the exceptions, nor raising signals properly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Proper signal numbers were not defined, and EXCP_INTERRUPT
was unhandled, leading to all sorts of subtle confusion.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.
This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.
This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't use global variables directly but via accessor functions. Rename globals.
Convert macros to functions, add GCC format attributes.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All the uses of ARM_CPUID() to vary behaviour have now been
removed, so we can delete the ARM_CPUID_* macros now.
The one exception is the TI915T/925T, because of its odd behaviour
where the MIDR value can be changed at runtime.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
If we execute linux-user code that does the following:
* A = mmap()
* execute code in A
* munmap(A)
* B = mmap(), but mmap returns the same address as A
* execute code in B
we end up executing a stale cached tb that contains translated code
from A, while we want new code from B.
This patch adds a TB flush for mmap'ed regions, before we return them,
avoiding the whole issue. It also adds a flush for munmap, so that we
don't execute stale TBs instead of getting a segfault.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Improve the emulation of /proc/self/maps by reading the underlying
host maps file and passing lines through with addresses adjusted
to be guest addresses. This is necessary to avoid false triggers
of the glibc check that a format string containing '%n' is not in
writable memory. (For an example see the bug reported in
https://bugs.launchpad.net/qemu-linaro/+bug/947888 where gpg aborts.)
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
After all target CPUs have been QOM'ified, we no longer need an #ifdef
to switch between object_delete() and g_free() in NPTL thread exit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For QOM'ified CPUs we cannot g_free() CPUArchState, we must
object_delete() the object it is embedded into.
Fixes LP#982321 (invalid free() while executing pacman with qemu-arm).
Reported-by: Serge Schneider <serge@xecdesign.com>
Reported-by: Russell Keith Davis <russell@russelldavis.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Serge Schneider <serge@xecdesign.com>
Tested-by: Russell Keith Davis <russell@russelldavis.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add support for ARM BE8 userspace binaries.
i.e. big-endian data and little-endian code.
In principle LE8 mode is also possible, but AFAIK has never actually
been implemented/used.
System emulation doesn't have any useable big-endian board models,
but should in principle work once you fix that.
Dynamic endianness switching requires messing with data accesses,
preferably with TCG cooperation, and is orthogonal to BE8 support.
Signed-off-by: Paul Brook <paul@codesourcery.com>
[PMM: various changes, mostly as per my suggestions in code review:
* rebase
* use EF_ defines rather than hardcoded constants
* make bswap_code a bool for future VMSTATE macro compatibility
* update comment in cpu.h about TB flags bit field usage
* factor out load-code-and-swap into arm_ld*_code functions and
get_user_code* macros
* fix stray trailing space at end of line
* added braces in disas.c to satisfy checkpatch
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The cpu capabilities passed by the elf loader in AT_HWCAP where
a constant.
Make AT_HWCAP reflect the emulated cpu features in order to give
correct clues to eglibc.
Riku Voipio: fixed to apply to current head
Fix : [Bug 887516] [NEW] VFP support reported for the PXA270
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The list of ARM syscall numbers was missing the entry for ppoll,
which meant we were accidentally not providing it. (This wasn't
causing any practical issues beyond warnings about unimplemented
syscalls, because glibc will fall back to another code path if the
syscall isn't present.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the prctl options PR_GET_NAME and PR_SET_NAME,
which take or return a name in a 16 byte buffer pointed to by arg2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Clean up the odd indentation of this switch statement before
we double its size by adding new cases to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When running 32-on-64 bit guests, we should always reserve as much
virtual memory as we possibly can for the guest process, so it can
never overlap with QEMU address space.
Fortunately we already have the infrastructure for that. All that's
missing is some sane default value to also make use of it!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
After consulting with Paul Brook, we concluded that it's best to search
the VMA space downwards, so that we don't even get the chance to conflict
with the brk range.
This patch resolves a bunch of allocation conflicts when using -R.
Signed-off-by: Alexander Graf <agraf@suse.de>
[minor changes to get it to apply -- PMM]
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fallocate gets off_t parameters passed in, so we should also read them out
accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- unbreak 64-bit guests
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds the ioctl wrapper definition for BLKBSZGET.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some BLK ioctls passed sizeof(x) into a macro that already did sizeof() on
the passed in argument, rendering the size information inside the ioctl be
the size of the host default integer type.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The compat LOOP_SET_STATUS ioctl uses struct old_dev_t in its passed
struct. That variable type is vastly different between different
architectures. Implement wrapping around it so we can use it.
This fixes running arm kpartx on an x86_64 host for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements all ioctls currently implemented by device mapper,
enabling us to run dmsetup and kpartx inside of linux-user.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TaskState contains linux_bprm struct which encapsulates argv among
other things.
argv might be used around the code and is expected to contain valid
data. Before this patch, ts->bprm->argv was NULL due to it being
freed right after loader_exec().
Signed-off-by: Fabio Erculiani <lxnay@sabayon.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
With the current fake /proc/self/stat implementation `ps` is
segfaulting because it expects to read PID and argv[0] as first and
second field respectively, with the latter being enclosed between
backets.
Reproducing is as easy as running: `ps` inside qemu-user chroot
with /proc mounted.
Signed-off-by: Fabio Erculiani <lxnay@sabayon.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All architectures work the same way, and all check for sas_ss_flags ==
0. The powerpc lines are wrong, and do the check the other way round
(it's a qemu internal check, which is done wrong only for this
architecture, it's more a typo than a bug). It's NOT ppc specific,
it's POSIX standard (sigaltstack) and qemu internal.
I have a test source that I will send in a follow-up (it's longer than
I would have wished, I'm sure that a better test case can be written
if needed)
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Link the Object base class and the module infrastructure for class
registration. Introduce $(universal-obj-y) for objects that are more
common than $(common-obj-y), so that those only get built once.
Call QOM module init for type registration.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* it's -> its (fixed for all files)
* dont -> don't (only fixed in a line which was touched by the previous fix)
* distrub -> disturb (fixed in the same line)
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix format type mismatches in do_brk debug printfs.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If the host's page size is equal to or smaller than the target's, native
execve() will fail appropriately with E2BIG if called with too big an
environment for the target to handle. It may falsely succeed, however, if
the host's page size is bigger, and feed the executed target process an
environment that is too big for it to handle, at which point QEMU barfs and
exits, confusing procmail's autoconf script and causing the build to fail.
This patch makes sure that execve() will return E2BIG if the environment is
too large for the target.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
sa_flags is uint32_t for mips{,n32,64}, so don't use tswapal().
edited by Riku Voipio: likewise on alpha
Reported-by: Khansa Butt <khansa@kics.edu.pk>
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Ehsan Ul Haq <ehsan.ulhaq@kics.edu.pk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement the f and l versions (operate on fd, don't follow links)
of the setxattr, getxattr and removexattr syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
It's valid to pass a NULL value pointer to setxattr, so don't
fail this case EFAULT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When calling wait4 or waitpid with a status pointer and WNOHANG, the
syscall can potentially not modify the status pointer input. Now if we
have guest code like:
int status = 0;
waitpid(pid, &status, WNOHANG);
if (status)
<breakage>
then we have to make sure that in case status did not change we actually
return the guest's initialized status variable instead of our own uninitialized.
We fail to do so today, as we proxy everything through an uninitialized status
variable which for me ended up always containing the last error code.
This patch fixes some test cases when building yast2-core in OBS for ARM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Correct the printing of errnos for syscalls which are handled
via print_syscall_ret_addr (mmap, mmap2, brk, shmat): errnos
are returned as negative returned values at this level, not
via the host 'errno' variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
While debugging some issues with QEMU_STRACE I stumbled over segmentation
faults that were pretty reproducible. Turns out we tried to treat a
normal return value as errno, resulting in an access over array boundaries
for the resolution.
Fix this by allowing failure to resolve invalid errnos into strings.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU linux user-mode's default log file name is "/tmp/qemu.log". In order to
change the log file name, user need to modify the source code then recompile
QEMU. This patch allow user use "-D logfile" option to specify the log file
name.
Signed-off-by: Chen Wen-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Gtk tries to read /proc/self/auxv to find its auxv table instead of
taking it from its own program memory space.
However, when running with linux-user, we see the host's auxv which
clearly exposes wrong information. so let's instead expose the guest
memory backed auxv tables via /proc/self/auxv as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The boehm gc finds the program's stack starting pointer by
checking /proc/self/stat. Unfortunately, so far it reads
qemu's stack pointer which clearly is wrong.
So let's instead fake the file so the guest program sees the
right address.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
glibc's pthread_attr_getstack tries to find the stack range from
/proc/self/maps. Unfortunately, /proc is usually the host's /proc
which means linux-user guests see qemu's stack there.
Fake the file with a constructed maps entry that exposes the guest's
stack range.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There are a number of files in /proc that expose host information
to the guest program. This patch adds infrastructure to override
the open() syscall for guest programs to enable us to on the fly
generate guest sensible files.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We create our own AUXV segment on stack and save a pointer to it.
However we don't save the length of it, so any code that wants to
do anything useful with it later on has to walk it again.
Instead, let's remember the length of our AUXV segment. This
simplifies later uses by a lot.
(edited by Riku to apply to qemu HEAD)
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Coverity complained about local variable key which was only partially
initiated. Only key.st_value was set. As this was also the only part
of key which was used in function symfind, the code could be optimized
by directly passing a pointer to orig_addr.
In bsd-user/elfload.c, fix ec822001a2
was missing. This was a simple replacement of > by >= in symfind, so
I fixed it here without creating an additional patch.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In an fcntl64 failure path, we were returning directly rather than
simply breaking out of the switch statement. This skips the strace
code for printing the syscall return value, so don't do that.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix some stray non-UTF-8 characters used in some ASCII art tables
by converting them to plain ASCII '|' instead.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Convert comment from ISO-8859-1 encoding to UTF-8 to match the rest
of QEMU's source code.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If a malloc() in copy_elf_strings() failed we would call memset()
before the "did malloc fail?" check. Fix this by moving to the
glib alloc/free routines for this memory so we can use g_try_malloc0
rather than having a separate memset(). Spotted by Coverity (see
bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Modern distributions place xattr.h in /usr/include/sys, and fold
libattr.so into libc. They also don't have an ENOATTR.
Make configure detect this, and add a qemu-xattr.h file that
directs the #include to the right place.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use target_ulong instead of hard-coded uint32_t.
Remove the disabled printf's that are redundant with -strace.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Don't confuse the load address with the load bias. They're equal
for ET_DYN objects (i.e. ld.so) but different for ET_EXEC objects
(i.e. statically linked).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For OBS, we're running a full cross-guest inside of a VM. When a build
is done there, we reboot the guest as shutdown mechanism.
Unfortunately, reboot is not implemented in linux-user. So this mechanism
fails, spilling unpretty warnings. This patch implements sys_reboot()
emulation.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
When running openat using qemu-arm, we stumbled over invalid permissions
on the created files. The reason for this is that the mode parameter gets
treates as an O_... flag, which it isn't - it's a permission bitmask.
This patch removes the needless translation of the mode parameter,
rendering permission passing of openat() to work with linux-user.
Reported-by: Dirk Mueller <dmueller@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
abi_(u)long might be different from target_ulong, so don't use tswapl
but introduce a new tswapal
Signed-off-by: Matthias Braun <matze@braunis.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Fix the "-version" option, which was accidentally broken in commit
fc9c541:
* exit after printing version information rather than proceeding
blithely onward (and likely printing the full usage message)
* correct the cut-n-paste error in the usage message for it
* don't insist on the presence of a following argument for
options which don't take an argument (this was preventing
'qemu-arm -version' from working)
* remove a spurious argc check from the beginning of main() which
meant 'QEMU_VERSION=1 qemu-arm' didn't work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The code is unused since 8 years, so remove it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Those blanks violate the coding conventions, see
scripts/checkpatch.pl.
Blanks missing after colons in the changed lines were added.
This patch does not try to fix tabs, long lines and other
problems in the changed lines, therefore checkpatch.pl reports
many violations.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-common.h is not a system include file, so it should be included
with "" instead of <>. Otherwise incremental builds might fail
because only local include files are checked for changes.
* linux-user/syscall.c included the file twice.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
(Edits by Riku Voipio to apply to current HEAD)
Rework option parsing code for linux-user in a table-driven manner to allow
environment variables for all commandline options.
Also generate usage() output from option table.
Fix complains from checkpatch.pl, also have envlist global
Signed-off-by: Johannes Schauer <j.schauer@email.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements the setxattr, getxattr, and removexattr syscalls
if CONFIG_ATTR is enabled.
Note that since libattr uses indirect syscalls for these, this change
depends on the fix for indirect syscall handling on MIPS.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: An-Cheng Huang <ancheng@ubnt.com>
On MIPS, some syscall arguments are taken from the stack. This patch adds
verification such that do_syscall() is only invoked if all arguments
have been successfully taken from the stack.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: An-Cheng Huang <ancheng@ubnt.com>
Change the number of argument for MIPS sys_syscall from 0 to 8. This
allows arguments for indirect syscalls to be processed correctly.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: An-Cheng Huang <ancheng@ubnt.com>
If gdbserver_start() fails (usually because we couldn't bind to the
requested TCP port) then exit qemu rather than blithely continuing.
This brings the linux-user behaviour in to line with system mode.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user: Implement new ARM 64 bit cmpxchg kernel helper
Linux 3.1 will have a new kernel-page helper for ARM implementing
64 bit cmpxchg. Implement this helper in QEMU linux-user mode:
* Provide kernel helper emulation for 64bit cmpxchg
* Allow guest to object to guest offset to ensure it can map a page
* Populate page with kernel helper version
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Technically the new mmapped pages are already initialized to zero
since they are anonymous, however we have to take care with the
contents that come from the remaining part of the previous page: it
may contains garbage data due to a previous heap usage (grown then
shrunken).
This patch completes commit 55f08c84. The problem could be reproduced
when emulating the build process of Perl 5.12.3 on ARMedSlack 13.37:
make[1]: Entering directory `/tmp/perl-5.12.3/cpan/Compress-Raw-Bzip2'
cc -c -I. -fno-strict-aliasing -pipe -fstack-protector \
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 \
-O2 -DVERSION=\"2.024\" -DXS_VERSION=\"2.024\" -fPIC "-I../.." \
-DBZ_NO_STDIO decompress.c
decompress.c: In function 'BZ2_decompress':
decompress.c:621:1: internal compiler error: Segmentation fault
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Laurent ALFONSI <laurent.alfonsi@st.com>
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Do not allocate TCG-only resources like the translation buffer when
running over KVM or XEN. Saves a "few" bytes in the qemu address space
and is also conceptually cleaner.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The code which prints the debug usage message on '-d ?' for *-user
has to come before the check for "not enough arguments", so that
"qemu-foo -d ?" prints the list of possible debug log items rather than
the generic usage message. (This was inadvertently broken in commit
c235d73.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The ia64 sys/ucontext.h defines macros 'uc_link', 'uc_sigmask' and
'uc_stack'. Rename the s390 target_ucontext struct members to tuc_*,
bringing them into line with the other targets and fixing a compile
failure on ia64 hosts caused by this clash.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
MIPS uses similar calling convention than ARM eabi, where when using
64-bit values some registers are skipped. This patch makes MIPS and ARM
eabi share the argument reordering code.
This affects ftruncate64, creating insane sized fails (or just failing).
Cc: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As reported by Cédric VINCENT:
The syscall #123 on SH4 should be "TARGET_NR_cacheflush" instead of
"TARGET_NR_modify_ldt" [1]. The only consequence of this misnaming is
that many "Unsupported syscall" warnings are issued when emulating JIT
compilers.
Reported-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The codes for get/setrlimit differ between linux target platforms.
This patch adds conversion.
This is important else programs (rsyslog, python, ...) can go into a
near infinite loop trying to close all the file descriptors from 0 to
-1.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Byte swap was applied in the wrong order with testing for
RLIM_INFINITY. On mips bigendian from an amd64 system this results in
infinity being misinterpretted as 2^31-1.
This is a serious bug because it causes setrlimit stack size to kill
all child processes. This means (for example) that 'make' can run no
children. The mechanism of failure:
1. parent sets stack size rlimit to 'infinity'
2. qemu screws this value up
3. child process fetches stack size as a large (but non-infinite) value
4. qemu tries to allocate stack before execution
5. stack allocation fails (too big) and child process dies
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Dereferencing a null pointer causes an exception 0xC (EXCP_AdEL)
instead of EXCP_TLBL. This should also trigger a segfault.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Return -TARGET_ENOSYS instead of -ENOSYS from linux-user/main.c
* Caused strange 'Level 2 synchronization messages' instead of
correctly reporting the syscall was missing.
* Made glibc simply fail instead of using older syscalls
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
The syscall sigaltstack takes two parameters, not zero. This patch
should have no impact as only values above 4 influence the runtime
behaviour. Nevertheless, it is wrong.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Enforce the same restriction on the size of the sigset passed to
pselect6 as the Linux kernel does. This is both correct and silences
a gcc 4.6 warning about a write-only variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add syscall numbers for new syscall numbers; this brings us
into line with Linux 2.6.39.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch was validated with programs from DirectFB-1.0 and
WebKit/DirectFB.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
DirectFB-1.0 uses at least two of the four added ioctls, and the two
others were added for completeness. This patch was validated with the
program "vlock -all/-new".
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As noticed while looking at "Bump do_syscall() up to 8 syscall arguments"
patch, sync_file_range uses a pad argument on 32bit mips. Deal with it
by reading the correct arguments when on mips.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Remove fenab as it is only written, never used. Add a FIXME
comment about the discrepancy between our behaviour and that
of the Linux kernel for this routine.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Move the access of fpu_save into the commented out skeleton code for
restoring FPU registers on SPARC sigreturn, thus silencing a gcc
4.6 "variable set but never used" warning.
(This doesn't affect the calculation of 'err' because in fact
__get_user() can never fail.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
On 32 bit MIPS a few syscalls have 7 arguments, and so to call
them via NR_syscall the guest needs to be able to pass 8 arguments
to do_syscall(). Raise the number of arguments do_syscall() takes
accordingly.
This fixes some gcc 4.6 compiler warnings about arg7 and arg8
variables being set and never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Just unfold its definition in only use.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[peter.maydell@linaro.org: fixed typo in the debug code,
added parentheses to fix precedence issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Looking at the other architectures, we should be using "how" not "arg1".
Signed-off-by: Juan Quintela <quintela@redhat.com>
[peter.maydell@linaro.org: remove unnecessary initialisation of how]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
We assign ret with the error code, but then return 0 unconditionally.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The dynamic linker from the GNU C library v2.10+ uses the ELF
auxiliary vector AT_RANDOM [1] as a pointer to 16 bytes with random
values to initialize the stack protection mechanism. Technically the
emulated GNU dynamic linker crashes due to a NULL pointer
derefencement if it is built with stack protection enabled and if
AT_RANDOM is not defined by the QEMU ELF loader.
[1] This ELF auxiliary vector was introduced in Linux v2.6.29.
This patch can be tested with the code above:
#include <elf.h> /* Elf*_auxv_t, AT_RANDOM, */
#include <stdio.h> /* printf(3), */
#include <stdlib.h> /* exit(3), EXIT_*, */
#include <stdint.h> /* uint8_t, */
#include <string.h> /* memcpy(3), */
#if defined(__LP64__) || defined(__ILP64__) || defined(__LLP64__)
# define Elf_auxv_t Elf64_auxv_t
#else
# define Elf_auxv_t Elf32_auxv_t
#endif
main(int argc, char* argv[], char* envp[])
{
Elf_auxv_t *auxv;
/* *envp = NULL marks end of envp. */
while (*envp++ != NULL);
/* auxv->a_type = AT_NULL marks the end of auxv. */
for (auxv = (Elf_auxv_t *)envp; auxv->a_type != AT_NULL; auxv++) {
if (auxv->a_type == AT_RANDOM) {
int i;
uint8_t rand_bytes[16];
printf("AT_RANDOM is: 0x%x\n", auxv->a_un.a_val);
memcpy(rand_bytes, (const uint8_t *)auxv->a_un.a_val, sizeof(rand_bytes));
printf("it points to: ");
for (i = 0; i < 16; i++) {
printf("0x%02x ", rand_bytes[i]);
}
printf("\n");
exit(EXIT_SUCCESS);
}
}
exit(EXIT_FAILURE);
}
Changes introduced in v2 and v3:
* Fix typos + thinko (AT_RANDOM is used for stack canary, not for
ASLR)
* AT_RANDOM points to 16 random bytes stored inside the user
stack.
* Add a small test program.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Laurent ALFONSI <laurent.alfonsi@st.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Some architectures (like Blackfin) only implement pselect6 (and skip
select/newselect). So add support for it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
There were several remaining bugs in the previous implementation of
do_brk():
1. the value of "new_alloc_size" was one page too large when the
requested brk was aligned on a host page boundary.
2. no new pages should be (re-)allocated when the requested brk is
in the range of the pages that were already allocated
previsouly (for the same purpose). Technically these pages are
never unmapped in the current implementation.
The problem/fix can be reproduced/validated with the test-suite above:
#include <unistd.h> /* syscall(2), */
#include <sys/syscall.h> /* SYS_brk, */
#include <stdio.h> /* puts(3), */
#include <stdlib.h> /* exit(3), EXIT_*, */
#include <stdint.h> /* uint*_t, */
#include <sys/mman.h> /* mmap(2), MAP_*, */
#include <string.h> /* memset(3), */
int main()
{
int exit_status = EXIT_SUCCESS;
uint8_t *current_brk = 0;
uint8_t *initial_brk;
uint8_t *new_brk;
uint8_t *old_brk;
int failure = 0;
int i;
void test_brk(int increment, int expected_result) {
new_brk = (uint8_t *)syscall(SYS_brk, current_brk + increment);
if ((new_brk == current_brk) == expected_result)
failure = 1;
current_brk = (uint8_t *)syscall(SYS_brk, 0);
}
void test_result() {
if (!failure)
puts("OK");
else {
puts("failure");
exit_status = EXIT_FAILURE;
}
}
void test_title(const char *title) {
failure = 0;
printf("%-45s : ", title);
fflush(stdout);
}
test_title("Initialization");
test_brk(0, 1);
initial_brk = current_brk;
test_result();
test_title("Don't overlap \"brk\" pages");
test_brk(HOST_PAGE_SIZE, 1);
test_brk(HOST_PAGE_SIZE, 1);
test_result();
/* Preparation for the test "Re-allocated heap is initialized". */
old_brk = current_brk - HOST_PAGE_SIZE;
memset(old_brk, 0xFF, HOST_PAGE_SIZE);
test_title("Don't allocate the same \"brk\" page twice");
test_brk(-HOST_PAGE_SIZE, 1);
test_brk(HOST_PAGE_SIZE, 1);
test_result();
test_title("Re-allocated \"brk\" pages are initialized");
for (i = 0; i < HOST_PAGE_SIZE; i++) {
if (old_brk[i] != 0) {
printf("(index = %d, value = 0x%x) ", i, old_brk[i]);
failure = 1;
break;
}
}
test_result();
test_title("Don't allocate \"brk\" pages over \"mmap\" pages");
new_brk = mmap(current_brk, HOST_PAGE_SIZE / 2, PROT_READ, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
if (new_brk == (void *) -1)
puts("unknown");
else {
test_brk(HOST_PAGE_SIZE, 0);
test_result();
}
test_title("All \"brk\" pages are writable (please wait)");
if (munmap(current_brk, HOST_PAGE_SIZE / 2) != 0)
puts("unknown");
else {
while (current_brk - initial_brk < 2*1024*1024*1024UL) {
old_brk = current_brk;
test_brk(HOST_PAGE_SIZE, -1);
if (old_brk == current_brk)
break;
for (i = 0; i < HOST_PAGE_SIZE; i++)
old_brk[i] = 0xAA;
}
puts("OK");
}
test_title("Maximum size of the heap > 16MB");
failure = (current_brk - initial_brk) < 16*1024*1024;
test_result();
exit(exit_status);
}
Changes introduced in patch v2:
* extend the "brk" test-suite embedded within the commit message;
* heap contents have to be initialized to zero, this bug was
exposed by "tst-calloc.c" from the GNU C library;
* don't [try to] allocate a new host page if the new "brk" is
equal to the latest allocated host page ("brk_page"); and
* print some debug information when DEBUGF_BRK is defined.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Reviewed-by: Christophe Guillon <christophe.guillon@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Since mmap() with MAP_FIXED will map over the top of existing mappings,
it's a bad idea to use it to implement brk(), because brk() with a
large size is likely to overwrite important things like qemu itself
or the host libc. So we drop MAP_FIXED and handle "mapped but at
different address" as an error case instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Fix a bug in the linux-user ELF loader code where it was not correctly
handling images where the lowest vaddr to be loaded was not page aligned.
The problem was that the code to probe for a suitable guest base address
was changing the 'loaddr' variable (by rounding it to a page boundary),
which meant that the load bias would then be incorrectly calculated
unless loaddr happened to already be page-aligned.
Binaries generated by gcc with the default linker script do start with
a loadable segment at a page-aligned vaddr, so were unaffected. This
bug was noticed with a binary created by the Google Go toolchain for ARM.
We fix the bug by refactoring the "probe for guest base" code out into
its own self-contained function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This patch fixes a "double free()" due to "realloc(syms, 0)" in the
loader when the ELF file has no "useful" symbol, as with the following
example (compiled with "sh4-linux-gcc -nostdlib"):
.text
.align 1
.global _start
_start:
mov #1, r3
trapa #40 // syscall(__NR_exit)
nop
The bug appears when the log (option "-d") is enabled.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Yves JANIN <yves.janin@st.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Fixes crash in i386 when user emulation base address is non-zero.
21797 rt_sigreturn(8,1082124603,1,0,1082126048,1082126248)Exit reason and status: signal 11
Signed-off-by: Mike McCormack <mj.mccormack@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Add command line support for logging to a location other than /tmp/qemu.log.
With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* rth/axp-next: (26 commits)
target-alpha: Implement TLB flush primitives.
target-alpha: Use a fixed frequency for the RPCC in system mode.
target-alpha: Trap for unassigned and unaligned addresses.
target-alpha: Remap PIO space for 43-bit KSEG for EV6.
target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
target-alpha: Implement more CALL_PAL values inline.
target-alpha: Disable interrupts properly.
target-alpha: All ISA checks to use TB->FLAGS.
target-alpha: Swap shadow registers moving to/from PALmode.
target-alpha: Implement do_interrupt for system mode.
target-alpha: Add IPRs to be used by the emulation PALcode.
target-alpha: Use kernel mmu_idx for pal_mode.
target-alpha: Add various symbolic constants.
target-alpha: Use do_restore_state for arithmetic exceptions.
target-alpha: Tidy up arithmetic exceptions.
target-alpha: Tidy exception constants.
target-alpha: Enable the alpha-softmmu target.
target-alpha: Rationalize internal processor registers.
target-alpha: Merge HW_REI and HW_RET implementations.
target-alpha: Cleanup MMU modes.
...
