Make it depend on gnutls too, since it is only used as part of gnutls
tests.
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All XTS configuration uses qemu_private_xts. Drop other variables as
they have only ever been used to generate the summary (which has since
been moved to meson.build).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
-----BEGIN PGP SIGNATURE-----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=bMQp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210621' into staging
s390x update:
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
# gpg: Signature made Mon 21 Jun 2021 10:53:00 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210621: (37 commits)
s390x/css: Add passthrough IRB
s390x/css: Refactor IRB construction
s390x/css: Split out the IRB sense data
s390x/css: Introduce an ESW struct
linux-user/s390x: Save and restore psw.mask properly
target/s390x: Use s390_cpu_{set_psw, get_psw_mask} in gdbstub
target/s390x: Improve s390_cpu_dump_state vs cc_op
target/s390x: Do not modify cpu state in s390_cpu_get_psw_mask
target/s390x: Expose load_psw and get_psw_mask to cpu.h
configure: Check whether we can compile the s390-ccw bios with -msoft-float
s390x/cpumodel: Bump up QEMU model to a stripped-down IBM z14 GA2
s390x/tcg: We support Vector enhancements facility
linux-user: elf: s390x: Prepare for Vector enhancements facility
s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)
s390x/tcg: Implement VECTOR FP NEGATIVE MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP TEST DATA CLASS IMMEDIATE
s390x/tcg: Implement 32/128 bit for VECTOR FP PERFORM SIGN OPERATION
s390x/tcg: Implement 128 bit for VECTOR FP LOAD ROUNDED
s390x/tcg: Implement 64 bit for VECTOR FP LOAD LENGTHENED
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The -msoft-float switch is not available in older versions of Clang.
Since we rely on the compiler to not generate floating point instructions
unexpectedly, we block those old compilers now via a test in the configure
script. Note that for some weird reasons, the Clang compiler only complains
about the missing soft-float support if no other flags are passed via
"-Wl,..." to the linker. So we have to use "compile_object" instead of
"compile_prog" for this check.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210525142032.156989-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
_sigev_un._tid is an internal glibc field and is not available on
musl libc. The sigevent(7) man page and Linux UAPI headers both use
sigev_notify_thread_id as a public way to access this field.
musl libc supports this field since 1.2.2[0], and glibc plans to
add support as well[1][2].
If sigev_notify_thread_id is not available, fall back to _sigev_un._tid
as before.
[0] http://git.musl-libc.org/cgit/musl/commit/?id=7c71792e87691451f2a6b76348e83ad1889f1dcb
[1] https://www.openwall.com/lists/musl/2019/08/01/5
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=27417
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210526035556.7931-1-mforney@mforney.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The longest test at the moment seems to be a (slower)
aarch64 host, for which test-mmap takes 64 seconds.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
_Static_assert is part of C11, which is now required.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-9-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the minimum gcc version is 7.5, we can use C11.
This will allow lots of cleanups to the code, currently
hidden behind macros in include/qemu/compiler.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210614233143.1221879-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The meson.build file defines supported_cpus which does not contain
x32, and x32 is not one of meson's stable built-in values:
https://mesonbuild.com/Reference-tables.html#cpu-families
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Message-Id: <878s3jrzm0.fsf@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added function that loads RSS eBPF program.
Added stub functions for RSS eBPF loader.
Added meson and configuration options.
By default, eBPF feature enabled if libbpf is present in the build system.
libbpf checked in configuration shell script and meson script.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several distros have been dropped since the last time we bumped the
minimum required CLang version.
Per repology, currently shipping versions are:
RHEL-8: 10.0.1
Debian Buster: 7.0.1
openSUSE Leap 15.2: 9.0.1
Ubuntu LTS 18.04: 6.0.0
Ubuntu LTS 20.04: 10.0.0
FreeBSD 12: 8.0.1
Fedora 33: 11.0.0
Fedora 34: 11.1.0
With this list Ubuntu LTS 18.04 is the constraint at 6.0.0
An LLVM version of 6.0.0 corresponds to macOS XCode version of 10.0
which dates from Sept 2018.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-13-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several distros have been dropped since the last time we bumped the
minimum required GCC version.
Per repology, currently shipping versions are:
RHEL-8: 8.3.1
Debian Buster: 8.3.0
openSUSE Leap 15.2: 7.5.0
Ubuntu LTS 18.04: 7.5.0
Ubuntu LTS 20.04: 9.3.0
FreeBSD: 10.3.0
Fedora 33: 9.2.0
Fedora 34: 11.0.1
OpenBSD: 8.4.0
macOS HomeBrew: 11.1.0
With this list Ubuntu LTS 18.04 / openSUSE Leap 15.2 are the
constraint at 7.5.0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-12-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The glib version was not previously constrained by RHEL-7 since it
rebases fairly often. Instead SLES 12 and Ubuntu 16.04 were the
constraints in 00f2cfbbec. Both of
these are old enough that they are outside our platform support
matrix now.
Per repology, current shipping versions are:
RHEL-8: 2.56.4
Debian Buster: 2.58.3
openSUSE Leap 15.2: 2.62.6
Ubuntu LTS 18.04: 2.56.4
Ubuntu LTS 20.04: 2.64.6
FreeBSD: 2.66.7
Fedora 33: 2.66.8
Fedora 34: 2.68.1
OpenBSD: 2.68.1
macOS HomeBrew: 2.68.1
Thus Ubuntu LTS 18.04 / RHEL-8 are the constraint for GLib version
at 2.56
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-11-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gnutls version
Per repology, current shipping versions are:
RHEL-8: 3.6.14
Debian Buster: 3.6.7
openSUSE Leap 15.2: 3.6.7
Ubuntu LTS 18.04: 3.5.18
Ubuntu LTS 20.04: 3.6.13
FreeBSD: 3.6.15
Fedora 33: 3.6.16
Fedora 34: 3.7.1
OpenBSD: 3.6.15
macOS HomeBrew: 3.6.15
Ubuntu LTS 18.04 has the oldest version and so 3.5.18 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-7-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gcrypt version and
assume that HMAC is always supported
Per repology, current shipping versions are:
RHEL-8: 1.8.5
Debian Buster: 1.8.4
openSUSE Leap 15.2: 1.8.2
Ubuntu LTS 18.04: 1.8.1
Ubuntu LTS 20.04: 1.8.5
FreeBSD: 1.9.2
Fedora 33: 1.8.6
Fedora 34: 1.9.3
OpenBSD: 1.9.3
macOS HomeBrew: 1.9.3
Ubuntu LTS 18.04 has the oldest version and so 1.8.0 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-6-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required nettle version and
drop a lot of backwards compatibility code for 2.x series of nettle.
Per repology, current shipping versions are:
RHEL-8: 3.4.1
Debian Buster: 3.4.1
openSUSE Leap 15.2: 3.4.1
Ubuntu LTS 18.04: 3.4
Ubuntu LTS 20.04: 3.5.1
FreeBSD: 3.7.2
Fedora 33: 3.5.1
Fedora 34: 3.7.2
OpenBSD: 3.7.2
macOS HomeBrew: 3.7.2
Ubuntu LTS 18.04 has the oldest version and so 3.4 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-4-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. So from the RHEL-7 perspective, we do not have to support
libssh v0.7 anymore now.
Let's look at the versions from other distributions and operating
systems - according to repology.org, current shipping versions are:
RHEL-8: 0.9.4
Debian Buster: 0.8.7
openSUSE Leap 15.2: 0.8.7
Ubuntu LTS 18.04: 0.8.0 *
Ubuntu LTS 20.04: 0.9.3
FreeBSD: 0.9.5
Fedora 33: 0.9.5
Fedora 34: 0.9.5
OpenBSD: 0.9.5
macOS HomeBrew: 0.9.5
HaikuPorts: 0.9.5
* The version of libssh in Ubuntu 18.04 claims to be 0.8.0 from the
name of the package, but in reality it is a 0.7 patched up as a
Frankenstein monster with patches from the 0.8 development branch.
This gave us some headaches in the past already and so it never worked
with QEMU. All attempts to get it supported have failed in the past,
patches for QEMU have never been merged and a request to Ubuntu to
fix it in their 18.04 distro has been ignored:
https://bugs.launchpad.net/ubuntu/+source/libssh/+bug/1847514
Thus we really should ignore the libssh in Ubuntu 18.04 in QEMU, too.
Fix it by bumping the minimum libssh version to something that is
greater than 0.8.0 now. Debian Buster and openSUSE Leap have the
oldest version and so 0.8.7 is the new minimum.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20210519155859.344569-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling with --disable-system there is a harmless yet still
annoying error message at the end of the "configure" step:
sed: can't read *-config-devices.h: No such file or directory
When only building the tools or docs, without any emulator at all,
there is even an additional message about missing *-config-target.h
files.
Fix it by checking whether any of these files are available before
using them.
Fixes: e0447a834d ("configure: Poison all current target-specific #defines")
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210519113840.298174-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not guard each assignment with a check for --with-git-submodules=ignore.
To avoid a confusing "GIT" line from the Makefile, guard the git-submodule-update
recipe so that it is empty when --with-git-submodules=ignore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now --with-git-submodules=ignore has a subtle difference from
just running without a .git directory, in that it does not check
that submodule sources actually exist. Move the check for
ui/keycodemapdb/README so that it happens even if the user
specified --with-git-submodules=ignore, with a customized
error message that is more suitable for this situation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210512045821.3257963-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When implementing spice vdagent protocol in qemu we only need the
spice-protocol package for that, spice-server is not needed. So
go split those two build dependencies.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210519053940.1888907-1-kraxel@redhat.com
Message-Id: <20210519053940.1888907-2-kraxel@redhat.com>
Otherwise you run into hilarity like trying when cross compiling a 32
bit ARM build on a 64 bit system trying to use host_cc to build 32 bit
test cases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-32-alex.bennee@linaro.org>
this is needed by the tricore-tcg-tests as tricore-gcc is not easily
available. Thus we rely on the HOST_CC to do the preprocessing of the
tricore assembly files.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-6-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-16-alex.bennee@linaro.org>
We are generating a lot of target-specific defines in the *-config-devices.h
and *-config-target.h files. Using them in common code is wrong and leads
to very subtle bugs since a "#ifdef CONFIG_SOMETHING" is not working there
as expected. To avoid these issues, we are already poisoning many of the
macros in include/exec/poison.h - but it's cumbersome to maintain this
list manually. Thus let's generate an additional list of poisoned macros
automatically from the current config switches - this should give us a
much better test coverage via the different CI configurations.
Note that CONFIG_TCG (which is also defined in config-host.h) and
CONFIG_USER_ONLY are special, so we have to filter these out.
Message-Id: <20210414112004.943383-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Target unicore32 was deprecated in commit 8e4ff4a8d2, v5.2.0. See
there for rationale.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-3-armbru@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
It was deprecated in commit e1c4269763, v5.2.0. See that commit
message for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210501075747.3293186-1-armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCblEEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObnQgAj10pRDODY9hIiUiYj2sTcEQTly3p
DC+ZWDaup67z3WV2C/vAS/x31RGIus+7bzji3fgtUcnGOr7sbuOCcs7CPY8mam5Y
GMPNrsUk2sZ5z9SVTq2vjEa61tjxtMpYXx9pnhgJzJAO4NJzNuX74ZdpA+oV5aTC
CvZDk8lC7BLU16MfeLcbw44xE4Oy05wWwaoP2pvhdOg47y85t/S9Il1yBCYi3y8C
pTOBBCYmHGPj/r7i4MhUGrAjIyGQu1w7av8nZXouRegoeVl28RKR8+pl7TfFpt+E
cp95yE8dPuNFJnCiZ3Kv01eBcSUcyp4gVb5H2Oa/nkkYRLpnONbUzYFtIA==
=zR5U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* AccelCPUClass and sysemu/user split for i386 (Claudio)
* i386 page walk unification
* Fix detection of gdbus-codegen
* Misc refactoring
# gpg: Signature made Wed 12 May 2021 09:39:29 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (32 commits)
coverity-scan: list components, move model to scripts/coverity-scan
configure: fix detection of gdbus-codegen
qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict
main-loop: remove dead code
target/i386: use mmu_translate for NPT walk
target/i386: allow customizing the next phase of the translation
target/i386: extend pg_mode to more CR0 and CR4 bits
target/i386: pass cr3 to mmu_translate
target/i386: extract mmu_translate
target/i386: move paging mode constants from SVM to cpu.h
target/i386: merge SVM_NPTEXIT_* with PF_ERROR_* constants
accel: add init_accel_cpu for adapting accel behavior to CPU type
accel: move call to accel_init_interfaces
i386: make cpu_load_efer sysemu-only
target/i386: gdbstub: only write CR0/CR2/CR3/EFER for sysemu
target/i386: gdbstub: introduce aux functions to read/write CS64 regs
i386: split off sysemu part of cpu.c
i386: split seg_helper into user-only and sysemu parts
i386: split svm_helper into sysemu and stub-only user
i386: separate fpu_helper sysemu-only parts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"pkg-config --variable=gdbus_codegen gio-2.0" returns "gdbus-codegen",
and it does not pass test -x (which does not walk the path).
Meson 0.58.0 notices that something is iffy, as the dbus_vmstate1
assignment in tests/qtest/meson.build uses an empty string as the
command, and fails very eloquently:
../tests/qtest/meson.build:92:2: ERROR: No program name specified.
Use the "has" function instead of test -x, and fix the generation
of config-host.mak since meson.build expects that GDBUS_CODEGEN
is absent, rather than empty, if the tool is unavailable.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: #178
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix ECKD booting with null block numbers in the chain
-----BEGIN PGP SIGNATURE-----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=Gg+4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10' into staging
* Make the s390-ccw bios compilable with Clang
* Fix ECKD booting with null block numbers in the chain
# gpg: Signature made Mon 10 May 2021 08:27:34 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10:
pc-bios/s390: Update the s390-ccw bios binaries with the Clang and other fixes
pc-bios/s390-ccw: Allow building with Clang, too
pc-bios/s390-ccw: Silence GCC 11 stringop-overflow warning
pc-bios/s390-ccw: Fix the cc-option macro in the Makefile
pc-bios/s390-ccw: Silence warning from Clang by marking panic() as noreturn
pc-bios/s390-ccw/netboot: Use "-Wl," prefix to pass parameter to the linker
pc-bios/s390-ccw: Use reset_psw pointer instead of hard-coded null pointer
pc-bios/s390-ccw/bootmap: Silence compiler warning from Clang
pc-bios/s390-ccw: don't try to read the next block if end of chunk is reached
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang unfortunately does not support generating code for the z900
architecture level and starts with the z10 instead. Thus to be able
to support compiling with Clang, we have to check for the supported
compiler flags. The disadvantage is of course that the bios image
will only run with z10 guest CPUs upwards (which is what most people
use anyway), so just in case let's also emit a warning in that case
(we will continue to ship firmware images that have been pre-built
with GCC in future releases, so this should not impact normal users,
too).
Message-Id: <20210502174836.838816-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Usually Meson uses pre-serialized information in meson-private to
speed up re-runs. This is not possible for version changes, where
Meson instead rebuilds the serialized information using cmd_line.txt.
In some cases cmd_line.txt can contain stale information, since it
is not rebuild except when "meson setup" is invoked. Update it in
the configure script to allow upgrading our Meson version.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace Windows specific macro with a more generic feature detection
macro. Allows slirp smb feature to be disabled manually as well.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-5-j@getutm.app>
[Use $default_feature as the default. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
Commit "c87ea11631 configure: add --without-default-features" use
default_feature to set default values for configure option. This value
is used for EXESUF too.
However, EXESUF is not option to be tested, it is just append to any
binary name so using --without-default-features set EXESUF to "n"o and
all binaries using it has form <name>no (e.g. qemu-imgno).
This is not expected behavior as disabling features should not cause
generating different binary names.
Reverting back to setting EXESUF to empty value unless needed otherwise.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210331081845.105089-1-mrezanin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test for 128-bit atomics is causing trouble with FreeBSD 12.2 and
--enable-werror:
cc -Werror -fPIE -DPIE -std=gnu99 -Wall -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wno-initializer-overrides -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-string-plus-int -Wno-typedef-redefinition -Wno-tautological-type-limit-compare -fstack-protector-strong -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -pie -Wl,-z,relro -Wl,-z,now -m64 -fstack-protector-strong
config-temp/qemu-conf.c:4:7: error: implicit declaration of function '__atomic_load_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
y = __atomic_load_16(&x, 0);
^
config-temp/qemu-conf.c:5:3: error: implicit declaration of function '__atomic_store_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
__atomic_store_16(&x, y, 0);
^
config-temp/qemu-conf.c:5:3: note: did you mean '__atomic_load_16'?
config-temp/qemu-conf.c:4:7: note: '__atomic_load_16' declared here
y = __atomic_load_16(&x, 0);
^
config-temp/qemu-conf.c:6:3: error: implicit declaration of function '__atomic_compare_exchange_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
__atomic_compare_exchange_16(&x, &y, x, 0, 0, 0);
^
3 errors generated.
Looking for they way we are using atomic functions in QEMU, we are not
using these functions with the _16 suffix anyway. Switch to the same
functions that we use in the include/qemu/atomic.h header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210317110512.583747-2-thuth@redhat.com>
Message-Id: <20210323165308.15244-12-alex.bennee@linaro.org>
In bbc17caf81, we used an alias attribute to allow target_page
to be declared const, and yet be initialized late.
This fails when using LTO with several versions of gcc.
The compiler looks through the alias and decides that the const
variable is statically initialized to zero, then propagates that
zero to many uses of the variable.
This can be avoided by compiling one object file with -fno-lto.
In this way, any initializer cannot be seen, and the constant
propagation does not occur.
Since we are certain to have this separate compilation unit, we
can drop the alias attribute as well. We simply have differing
declarations for target_page in different compilation units.
Drop the use of init_target_page, and drop the configure detection
for CONFIG_ATTRIBUTE_ALIAS.
In order to change the compilation flags for a file with meson,
we must use a static_library. This runs into specific_ss, where
we would need to create many static_library instances.
Fix this by splitting page-vary.c: the page-vary-common.c part is
compiled once as a static_library, while the page-vary.c part is
left in specific_ss in order to handle the target-specific value
of TARGET_PAGE_BITS_MIN.
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210321211534.2101231-1-richard.henderson@linaro.org>
[PMD: Fix typo in subject, split original patch in 3]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20210322112427.4045204-4-f4bug@amsat.org>
[rth: Update MAINTAINERS]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
local directive make the configure fails on these systems.
Signed-off-by: David Carlier <devnexen@gmail.com>
Message-Id: <CA+XhMqy95D8X-QvBcEfL=a-Rkgy6aJtheskkqZwQkreru+T_Wg@mail.gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now, compilation of util/dbus is implicit and depends
on libgio presence on the building host.
The patch adds options to manage libgio dependencies explicitly.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210312151440.405776-1-den-plotnikov@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TILE-Gx was only implemented in linux-user mode, but support for this CPU
was removed from the upstream Linux kernel in 2018, and it has also been
dropped from glibc, so there is no new Linux development taking place with
this architecture. For running the old binaries, users can simply use older
versions of QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210224183952.80463-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This has the following visible changes:
- GBM is required only for OpenGL dma-buf.
- X11 is explicitly required by gtk-egl.
- EGL is now mandatory for the OpenGL displays.
The last one needs some detailed description. Before this change,
EGL was tested only for OpenGL dma-buf with the check of
EGL_MESA_image_dma_buf_export. However, all of the OpenGL
displays depend on EGL and EGL_MESA_image_dma_buf_export is always
defined by epoxy's EGL interface.
Therefore, it makes more sense to always check the presence of EGL
and say the OpenGL displays are available along with OpenGL dma-buf
if it is present.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210223060307.87736-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With --enable-fuzzing, QEMU_CFLAGS include -fsanitize=fuzzer-no-link.
This should allow us to build non-fuzzer binaries using objects
instrumented for fuzzing. However, to do that, we also need to link with
-fsanitize=fuzzer-no-link. We were not doing that.
Reported-by: Li Qiang <liq3ea@163.com>,
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210221174510.22542-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add configuration options to enable or disable multiprocess QEMU code
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 6cc37253e35418ebd7b675a31a3df6e3c7a12dc1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Users might want to enable all features, without realizing some
features have negative effect. Mention the TCI feature is slow
and experimental, hoping it will be selected knowingly.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210125144530.2837481-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SVE, currently the bulk of the GDB TCG tests, we need at least GDB
9.1 to support the "ieee_half" data type we report. This only affects
when GDB tests are run; users can still use lower versions of gdb as
long as they aren't talking to an SVE enabled model. The work around
is to either get a newer gdb or disable SVE for their CPU model.
Reported-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210202134001.25738-9-alex.bennee@linaro.org>
When checking GDB versions we have to tolerate all sorts of random
distro extensions to the version string. While we already attempt to
do some of that before we call version_ge is makes sense to try and
regularise the first input by stripping extraneous -'s. While we at it
convert the old-style shell quoting into a cleaner form t shut up my
editors linter lest it confuse me by underlining the whole line.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210202134001.25738-8-alex.bennee@linaro.org>
The configure option was backward, and we failed to
pass the value on to meson.
Fixes: 23a77b2d18 ("build-system: clean up TCG/TCI configury")
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A workaround added in early days of 64-bit OSX forced x86_64 if the
host machine had 64-bit support. This creates issues when cross-
compiling for ARM64. Additionally, the user can always use --cpu=* to
manually set the host CPU and therefore this workaround should be
removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-12-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On iOS there is no CoreAudio, so we should not assume Darwin always
has it.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-11-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-9-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add objc to the Meson cross file as well as detection of Darwin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210126012457.39046-8-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Meson will find CoreFoundation, IOKit, and Cocoa as needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-7-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The iOS toolchain does not use the host prefix naming convention. So we
need to enable cross-compile options while allowing the PREFIX to be
blank.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-id: 20210126012457.39046-3-j@getutm.app
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the preadv availability check to meson.build. This is what we
want to be doing for host-OS-feature-checks anyway, but it also fixes
a problem with building for macOS with the most recent XCode SDK on a
Catalina host.
On that configuration, 'preadv()' is provided as a weak symbol, so
that programs can be built with optional support for it and make a
runtime availability check to see whether the preadv() they have is a
working one or one which they must not call because it will
runtime-assert. QEMU's configure test passes (unless you're building
with --enable-werror) because the test program using preadv()
compiles, but then QEMU crashes at runtime when preadv() is called,
with errors like:
dyld: lazy symbol binding failed: Symbol not found: _preadv
Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication
Expected in: /usr/lib/libSystem.B.dylib
dyld: Symbol not found: _preadv
Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication
Expected in: /usr/lib/libSystem.B.dylib
Meson's own function availability check has a special case for macOS
which adds '-Wl,-no_weak_imports' to the compiler flags, which forces
the test to require the real function, not the macOS-version-too-old
stub.
So this commit fixes the bug where macOS builds on Catalina currently
require --disable-werror.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210126155846.17109-1-peter.maydell@linaro.org
Since meson switch and commit feabc71dfa ("configure: do not include
dependency flags in QEMU_CFLAGS and LIBS"), LIBS is unused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210114125605.1227742-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make CONFIG_TCG_INTERPRETER a Meson option, and enable TCI (though with
a warning) if the host CPU is unsupported, making it more similar to
other --enable-* options.
Remove TCG-specific include paths from !CONFIG_TCG builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two cases that need to be accounted for when compiling QEMU
for MinGW32:
1) A standalone distribution, where QEMU is self contained and
extracted by the user, such as a user would download from the QEMU
website. In this case, all the QEMU executable files should be
rooted in $prefix to ensure they can be easily found by the user
2) QEMU integrated into a distribution image/sysroot/SDK and
distributed with other programs. In this case, the provided
arguments for bindir/datadir/etc. should be respected as they for a
Linux build.
Restructures the MinGW path configuration so that all of the paths
except bindir use the same rules as when building for other platforms.
This satisfies #2 and #1 since these files do not need to be directly in
$prefix anyway.
The handling for --bindir is changed so that it defaults to $prefix on
MinGW (maintaining the compatibility with #1), but if the user specifies
a specific path when configuring it can also satisfy #2.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Message-Id: <20210112210239.28836-1-JPEWhacker@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is not a part of standard time.h. Glibc put it under
time.h however musl treat it as a sys timex extension.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210118063808.12471-2-jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The support of socket based debugging which we need for linux-user
testing is only really stable as of 8.3.1 so lets gate our use of GDB
on having a relatively modern version.
For direct testing you can just point to a locally compiled version of
gdb via configure, e.g.:
../../configure --gdb=$HOME/src/binutils-gdb.git/builds/all/install/bin/gdb
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210108224256.2321-4-alex.bennee@linaro.org>
Make config.status generation a bit more robust. (The quote_sh
function will also be reused to parse configure's command line
arguments in an external script driven by Meson build option
introspection).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cocoa UI code currently assumes it is always the active UI
and does not interact well with other UI frontend code. Move
the relevant checks to Meson now that all other frontends
have become Meson options. This way, SDL/GTK+/Cocoa can be
parsed entirely by scripts/configure-parse-buildoptions.pl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also allows removing CONFIG_NEED_X11, all the ingredients
can be computed easily in meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now move the logic verbatim. GTK+ actually has a hard requirement
on X11 if gtk+x11 is present, but we will sort that out later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_GTK_GL is defined if OpenGL is present and GTK+
is 3.16 or newer. Since GTK+ 3.22 is the minimum supported
version, just use CONFIG_OPENGL instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the automagic connection between --enable-cocoa
and enabling coreaudio in audio_drv_list. It can be
overridden anyway just by placing --enable-cocoa before
--audio-drv-list.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cURL 7.16.0 was released in October 2006. Just remove code that is
in all likelihood not being used anywhere, and require the oldest version
found in currently supported distros, which is 7.29.0 from CentOS 7.
pkg-config is enough for QEMU, since it does not need extra information
such as the path for certicate authorities. All supported platforms
today will all have pkg-config for curl, so we can drop curl-config.
Suggested-by: Daniel Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
