The only reason I can imagine for this strange code at the very-end of
bdrv_reopen_commit is the fact that bs->read_only updated after
calling drv->bdrv_reopen_commit in bdrv_reopen_commit. And in the same
time, prior to previous commit, qcow2_reopen_bitmaps_rw did a wrong
check for being writable, when actually it only need writable file
child not self.
So, as it's fixed, let's move things to correct place.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190927122355.7344-10-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
- Correct check for write access to file child, and in correct place
(only if we want to write).
- Support reopen rw -> rw (which will be used in following commit),
for example, !bdrv_dirty_bitmap_readonly() is not a corruption if
bitmap is marked IN_USE in the image.
- Consider unexpected bitmap as a corruption and check other
combinations of in-image and in-RAM bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190927122355.7344-9-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
qcow2_reopen_bitmaps_ro wants to store bitmaps and then mark them all
readonly. But the latter don't work, as
qcow2_store_persistent_dirty_bitmaps removes bitmaps after storing.
It's OK for inactivation but bad idea for reopen-ro. And this leads to
the following bug:
Assume we have persistent bitmap 'bitmap0'.
Create external snapshot
bitmap0 is stored and therefore removed
Commit snapshot
now we have no bitmaps
Do some writes from guest (*)
they are not marked in bitmap
Shutdown
Start
bitmap0 is loaded as valid, but it is actually broken! It misses
writes (*)
Incremental backup
it will be inconsistent
So, let's stop removing bitmaps on reopen-ro. But don't rejoice:
reopening bitmaps to rw is broken too, so the whole scenario will not
work after this patch and we can't enable corresponding test cases in
260 iotests still. Reopening bitmaps rw will be fixed in the following
patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-7-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
The function is unused, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-6-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Firstly, no reason to optimize failure path. Then, function name is
ambiguous: it checks for readonly and similar things, but someone may
think that it will ignore normal bitmaps which was just unchanged, and
this is in bad relation with the fact that we should drop IN_USE flag
for unchanged bitmaps in the image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
bdrv_dirty_bitmap_next is always used in same pattern. So, split it
into _next and _first, instead of combining two functions into one and
add FOR_EACH_DIRTY_BITMAP macro.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
mutex field is just a pointer to bs->dirty_bitmap_mutex, so no needs
to store it in BdrvDirtyBitmap when we have bs pointer in it (since
previous patch).
Drop mutex field. Constantly use bdrv_dirty_bitmaps_lock/unlock in
block/dirty-bitmap.c to make it more obvious that it's not per-bitmap
lock. Still, for simplicity, leave bdrv_dirty_bitmap_lock/unlock
functions as an external API.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add bs field to BdrvDirtyBitmap structure. Drop BlockDriverState
parameter from bitmap APIs where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-3-vsementsov@virtuozzo.com
[Rebased on top of block-copy. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Drop meta bitmaps, as they are unused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
qmp_block_dirty_bitmap_add and do_block_dirty_bitmap_remove do acquire
aio context since 0a6c86d024. But this is not enough: we also must
lock qcow2 mutex when access in-image metadata. Especially it concerns
freeing qcow2 clusters.
To achieve this, move qcow2_can_store_new_dirty_bitmap and
qcow2_remove_persistent_dirty_bitmap to coroutine context.
Since we work in coroutines in correct aio context, we don't need
context acquiring in blockdev.c anymore, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's more comfortable to not deal with local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
block/dirty-bitmap.c seems to be more appropriate for it and
bdrv_remove_persistent_dirty_bitmap already in it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
When the COW areas are included, the size of an allocation can exceed
INT_MAX. This is kind of limited by handle_alloc() in that it already
caps avail_bytes at INT_MAX, but the number of clusters still reflects
the original length.
This can have all sorts of effects, ranging from the storage layer write
call failing to image corruption. (If there were no image corruption,
then I suppose there would be data loss because the .cow_end area is
forced to be empty, even though there might be something we need to
COW.)
Fix all of it by limiting nb_clusters so the equivalent number of bytes
will not exceed INT_MAX.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BDRV_REQ_NO_FALLBACK flag means that an operation should only be
performed if it can be offloaded or otherwise performed efficiently.
However a misaligned write request requires a RMW so we should return
an error and let the caller decide how to proceed.
This hits an assertion since commit c8bb23cbdb if the required
alignment is larger than the cluster size:
qemu-img create -f qcow2 -o cluster_size=2k img.qcow2 4G
qemu-io -c "open -o driver=qcow2,file.align=4k blkdebug::img.qcow2" \
-c 'write 0 512'
qemu-io: block/io.c:1127: bdrv_driver_pwritev: Assertion `!(flags & BDRV_REQ_NO_FALLBACK)' failed.
Aborted
The reason is that when writing to an unallocated cluster we try to
skip the copy-on-write part and zeroize it using BDRV_REQ_NO_FALLBACK
instead, resulting in a write request that is too small (2KB cluster
size vs 4KB required alignment).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replay is capable of recording normal BH events, but sometimes
there are single use callbacks scheduled with aio_bh_schedule_oneshot
function. This patch enables recording and replaying such callbacks.
Block layer uses these events for calling the completion function.
Replaying these calls makes the execution deterministic.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In record/replay mode bdrv queue is controlled by replay mechanism.
It does not allow saving or loading the snapshots
when bdrv queue is not empty. Stopping the VM is not blocked by nonempty
queue, but flushing the queue is still impossible there,
because it may cause deadlocks in replay mode.
This patch disables bdrv_drain_all and bdrv_flush_all in
record/replay mode.
Stopping the machine when the IO requests are not finished is needed
for the debugging. E.g., breakpoint may be set at the specified step,
and forcing the IO requests to finish may break the determinism
of the execution.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch enables making snapshots with blkreplay used in
block devices.
This function is required to make bdrv_snapshot_goto without
calling .bdrv_open which is not implemented.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu is currently not able to detect truncated vhdx image files.
Add a basic check if all allocated blocks are reachable at open and
report all errors during bdrv_co_check.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop write notifiers and use filter node instead.
= Changes =
1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.
2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.
3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.
4. Block-copy is now using BdrvChildren instead of BlockBackends
5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.
= Iotest changes =
56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.
Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.
141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.
257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Backup-top filter caches write operations and does copy-before-write
operations.
The driver will be used in backup instead of write-notifiers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-5-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split block_copy_set_callbacks out of block_copy_state_new. It's needed
for further commit: block-copy will use BdrvChildren of backup-top
filter, so it will be created from backup-top filter creation function.
But callbacks will still belong to backup job and will be set in
separate.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-4-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is logic-less refactoring, which simplifies further patch, as
we'll need write_flags for backup-top filter creation and backup-top
should be created before block job creation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-3-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move synchronization mechanism to block-copy, to be able to use one
block-copy instance from backup job and backup-top filter in parallel.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-2-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A block driver can provide a callback to report driver-specific
statistics.
file-posix driver now reports discard statistics
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190923121737.83281-10-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will help to identify how many of the user-issued discard operations
(accounted on a device level) have actually suceeded down on the host file
(even though the numbers will not be exactly the same if non-raw format
driver is used (e.g. qcow2 sending metadata discards)).
Note that these numbers will not include discards triggered by
write-zeroes + MAY_UNMAP calls.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-9-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Each block_acct_done/failed call is designed to correspond to a
previous block_acct_start call, which initializes the stats cookie.
However sometimes it is not the case, e.g. some error paths might
report the same cookie twice because it is hard to accurately track if
the cookie was reported yet or not.
This patch cleans the cookie after report.
(Note: block_acct_failed/done without a previous block_acct_start at
all should be avoided. Uninitialized cookie might hold a garbage value
and there is still "< BLOCK_MAX_IOTYPE" assertion for that)
It will be particularly useful in ide code where it's hard to
keep track whether the request done its accounting or not: in the
following patch of the series, trim requests will do the accounting
separately.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-4-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190923121737.83281-3-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split block_copy to separate file, to be cleanly shared with backup-top
filter driver in further commits.
It's a clean movement, the only change is drop "static" from interface
functions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-8-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We need to fix comment style around block-copy functions before further
moving them to separate file to satisfy checkpatch. But do more: fix
all comments style. Also, seems like doubled first asterisk is not
forbidden, but drop it too for consistency.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split copying code part from backup to "block-copy", including separate
state structure and function renaming. This is needed to share it with
backup-top filter driver in further commits.
Notes:
1. As BlockCopyState keeps own BlockBackend objects, remaining
job->common.blk users only use it to get bs by blk_bs() call, so clear
job->commen.blk permissions set in block_job_create and add
job->source_bs to be used instead of blk_bs(job->common.blk), to keep
it more clear which bs we use when introduce backup-top filter in
further commit.
2. Rename s/initializing_bitmap/skip_unallocated/ to sound a bit better
as interface to BlockCopyState
3. Split is not very clean: there left some duplicated fields, backup
code uses some BlockCopyState fields directly, let's postpone it for
further improvements and keep this comment simpler for review.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190920142056.12778-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split copying logic which will be shared with backup-top filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We shouldn't try to copy bytes beyond EOF. Fix it.
Fixes: 9ded4a0114
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920142056.12778-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Of course, QEMU_ALIGN_UP is a typo, it should be QEMU_ALIGN_DOWN, as we
are trying to find aligned size which satisfy both source and target.
Also, don't ignore too small max_transfer. In this case seems safer to
disable copy_range.
Fixes: 9ded4a0114
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190920142056.12778-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It improves performance for fragmented qcow2 images.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190916175324.18478-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Similarly to previous commit, prepare for parallelizing write-loop
iterations.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190916175324.18478-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Further patch will run partial requests of iterations of
qcow2_co_preadv in parallel for performance reasons. To prepare for
this, separate part which may be parallelized into separate function
(qcow2_co_preadv_task).
While being here, also separate encrypted clusters reading to own
function, like it is done for compressed reading.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190916175324.18478-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Common interface for aio task loops. To be used for improving
performance of synchronous io loops in qcow2, block-stream,
copy-on-read, and may be other places.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190916175324.18478-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We must not write data to inactive nodes, and a COR is certainly
something we can simply not do without upsetting anyone. So skip COR
operations on inactive nodes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191001174827.11081-2-mreitz@redhat.com
Message-Id: <20191001174827.11081-2-mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Nodes involved in internal snapshots were those that were returned by
bdrv_next(), inserted and not read-only. bdrv_next() in turn returns all
nodes that are either the root node of a BlockBackend or monitor-owned
nodes.
With the typical -drive use, this worked well enough. However, in the
typical -blockdev case, the user defines one node per option, making all
nodes monitor-owned nodes. This includes protocol nodes etc. which often
are not snapshottable, so "savevm" only returns an error.
Change the conditions so that internal snapshot still include all nodes
that have a BlockBackend attached (we definitely want to snapshot
anything attached to a guest device and probably also the built-in NBD
server; snapshotting block job BlockBackends is more of an accident, but
a preexisting one), but other monitor-owned nodes are only included if
they have no parents.
This makes internal snapshots usable again with typical -blockdev
configurations.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
"qemu/cutils.h" contains various qemu_strtosz_*() functions
useful to convert strings to size. It seems natural to have
the opposite usage (from size to string) there too.
The function definition is already in util/cutils.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190903120555.7551-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Change the qcow2_co_{encrypt|decrypt} to just receive full host and
guest offsets and use this function directly instead of calling
do_perform_cow_encrypt (which is removed by that patch).
* Adjust qcow2_co_encdec to take full host and guest offsets as well.
* Document the qcow2_co_{encrypt|decrypt} arguments
to prevent the bug fixed in former commit from hopefully
happening again.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20190915203655.21638-3-mlevitsk@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[mreitz: Let perform_cow() return the error value returned by
qcow2_co_encrypt(), as proposed by Vladimir]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This fixes subtle corruption introduced by luks threaded encryption
in commit 8ac0f15f33
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1745922
The corruption happens when we do a write that
* writes to two or more unallocated clusters at once
* doesn't fully cover the first sector
* doesn't fully cover the last sector
* uses luks encryption
In this case, when allocating the new clusters we COW both areas
prior to the write and after the write, and we encrypt them.
The above mentioned commit accidentally made it so we encrypt the
second COW area using the physical cluster offset of the first area.
The problem is that offset_in_cluster in do_perform_cow_encrypt
can be larger that the cluster size, thus cluster_offset
will no longer point to the start of the cluster at which encrypted
area starts.
Next patch in this series will refactor the code to avoid all these
assumptions.
In the bugreport that was triggered by rebasing a luks image to new,
zero filled base, which lot of such writes, and causes some files
with zero areas to contain garbage there instead.
But as described above it can happen elsewhere as well
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190915203655.21638-2-mlevitsk@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we had done that all along, debugging would have been much simpler.
(Also, I/O errors are better than hangs.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190910124136.10565-8-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Background: As of cURL 7.59.0, it verifies that several functions are
not called from within a callback. Among these functions is
curl_multi_add_handle().
curl_read_cb() is a callback from cURL and not a coroutine. Waking up
acb->co will lead to entering it then and there, which means the current
request will settle and the caller (if it runs in the same coroutine)
may then issue the next request. In such a case, we will enter
curl_setup_preadv() effectively from within curl_read_cb().
Calling curl_multi_add_handle() will then fail and the new request will
not be processed.
Fix this by not letting curl_read_cb() wake up acb->co. Instead, leave
the whole business of settling the AIOCB objects to
curl_multi_check_completion() (which is called from our timer callback
and our FD handler, so not from any cURL callbacks).
Reported-by: Natalie Gavrielov <ngavrilo@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1740193
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190910124136.10565-7-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of reporting all sockets to cURL, only report the one that has
caused curl_multi_do_locked() to be called. This lets us get rid of the
QLIST_FOREACH_SAFE() list, which was actually wrong: SAFE foreaches are
only safe when the current element is removed in each iteration. If it
possible for the list to be concurrently modified, we cannot guarantee
that only the current element will be removed. Therefore, we must not
use QLIST_FOREACH_SAFE() here.
Fixes: ff5ca1664a
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190910124136.10565-6-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
curl_multi_do_locked() currently marks all sockets as ready. That is
not only inefficient, but in fact unsafe (the loop is). A follow-up
patch will change that, but to do so, curl_multi_do_locked() needs to
know exactly which socket is ready; and that is accomplished by this
patch here.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190910124136.10565-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
While it is more likely that transfers complete after some file
descriptor has data ready to read, we probably should not rely on it.
Better be safe than sorry and call curl_multi_check_completion() in
curl_multi_do(), too, just like it is done in curl_multi_read().
With this change, curl_multi_do() and curl_multi_read() are actually the
same, so drop curl_multi_read() and use curl_multi_do() as the sole FD
handler.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190910124136.10565-4-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This does not really change anything, but it makes the code a bit easier
to follow once we use @socket as the opaque pointer for
aio_set_fd_handler().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190910124136.10565-3-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Vladimir Sementsov-Ogievskiy
Max Reitz
Alberto Garcia
Pavel Dovgalyuk
Peter Lieven
Maxim Levitsky
Anton Nefedov
Kevin Wolf
Philippe Mathieu-Daudé