Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
The last user of this field disappeared when we replace the
sector-based bdrv_write() with the byte-based bdrv_pwrite().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No one is using these functions anymore, all callers have switched to
the byte-based bdrv_pread() and bdrv_pwrite()
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's only a couple of bdrv_read() and bdrv_write() calls left in
the vvfat code, and they can be trivially replaced with the byte-based
bdrv_pread() and bdrv_pwrite().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's only a couple of bdrv_read() and bdrv_write() calls left in
the vdi code, and they can be trivially replaced with the byte-based
bdrv_pread() and bdrv_pwrite().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's only one bdrv_write() call left in the qcow2 code, and it can
be trivially replaced with the byte-based bdrv_pwrite().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On a file system used by the customer, fallocate() returns an error
if the block is not properly aligned. So, bdrv_co_pwrite_zeroes()
fails. We can handle that case the same way as it is done for the
unsupported cases, namely, call to bdrv_driver_pwritev() that writes
zeroes to an image for the unaligned chunk of the block.
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1554474244-553661-1-git-send-email-andrey.shinkevich@virtuozzo.com
Message-Id: <1554474244-553661-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This function combines bdrv_set_backing_hd() and bdrv_replace_node()
so we can use it to simplify the code a bit in commit_start().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190403143748.9790-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
ssh_bdrv_dirname() is basically the generic bdrv_dirname(), except it
takes care not to silently chop off any query string (i.e.,
host_key_check).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190225190828.17726-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This requires some changes to keep iotests 104 and 207 working.
qemu-img info in 104 will now return a filename including the user name
and the port, which need to be filtered by adjusting REMOTE_TEST_DIR in
common.rc. This additional information has to be marked optional,
however (which is simple as REMOTE_TEST_DIR is a regex), because
otherwise 197 and 215 would fail: They use it (indirectly) to filter
qemu-img create output which contains a backing filename they have
passed to it -- which probably does not contain a user name or port
number.
The problem in 207 is a nice one to have: qemu-img info used to return
json:{} filenames, but with this patch it returns nice plain ones. We
now need to adjust the filtering to hide the user name (and port number
while we are at it). The simplest way to do this is to include both in
iotests.remote_filename() so that bdrv_refresh_filename() will not
change it, and then iotests.img_info_log() will filter it correctly
automatically.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190225190828.17726-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Bitmap data may take a lot of disk space, so it's better to discard it
always.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-id: 1551346019-293202-1-git-send-email-andrey.shinkevich@virtuozzo.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[mreitz: Use the commit message proposed by Vladimir]
Signed-off-by: Max Reitz <mreitz@redhat.com>
No reasons for not reporting found corruptions as corruptions in case
of some internal errors, especially in case of just failed to fix l2
entry (and in this case, missed corruptions may influence comparing
logic, when we calculate difference between corruptions fields of two
results)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190227131433.197063-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Do not count a cluster which is fixed to be ZERO as allocated.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190227131433.197063-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reduce number of structures ignored in overlap check: when checking
active table ignore active tables, when checking inactive table ignore
inactive ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190227131433.197063-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_inc_refcounts_imrt() (through realloc_refcount_array()) can eat
an unpredictable amount of memory on corrupted table entries, which are
referencing regions far beyond the end of file.
Prevent this, by skipping such regions from further processing.
Interesting that iotest 138 checks exactly the behavior which we fix
here. So, change the test appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190227131433.197063-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Increase corruptions_fixed only after successful fix.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190227131433.197063-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qed_read_table and qed_write_table use coroutine-only interfaces but
are not marked coroutine_fn. Happily, they are called only from
coroutine context, so we only need to add missed markers.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
You can reproduce this by passing an invalid filter-node-name (like
"1234") to block-commit. In this case the base image is put in
read-write mode but is never reset back to read-only.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move to _co_ versions of io functions qed_read_table() and
qed_write_table(), as we use qemu_co_mutex_unlock()
anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes a few things in the way error codes are handled in
the qcow2 compression code:
a) qcow2_co_pwritev_compressed() expects qcow2_co_compress() to only
return -1 or -2 on failure, but this is not correct. Since the
change from qcow2_compress() to qcow2_co_compress() in commit
ceb029cd6f the new code can also return -EINVAL (although
there does not seem to exist any code path that would cause that
error in the current implementation).
b) -1 and -2 are ad-hoc error codes defined in qcow2_compress().
This patch replaces them with standard constants from errno.h.
c) Both qcow2_compress() and qcow2_co_do_compress() return a negative
value on failure, but qcow2_co_pwritev_compressed() stores the
value in an unsigned data type.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
make_completely_empty() is an optimisated path for bdrv_make_empty()
where completely new metadata is created inside the image file instead
of going through all clusters and discarding them. For an external data
file, however, we actually need to do discard operations on the data
file; just overwriting the qcow2 file doesn't get rid of the data.
The necessary slow path with an explicit discard operation already
exists for other cases. Use it for external data files, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
preallocate_co() already gave the data file the full size without
forwarding the requested preallocation mode to the protocol. When
bdrv_co_truncate() was called later with the preallocation mode, the
file didn't actually grow any more, so the data file stayed unallocated
even if full preallocation was requested.
Pass the right preallocation mode to preallocate_co() and remove the
second bdrv_co_truncate() to fix this. As a side effect, the ugly
one-byte write in preallocate_co() is replaced with a truncate call,
now leaving the last block unallocated on the protocol level as it
should be.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We'll add a bdrv_co_truncate() call in the next patch which can return
an Error that we don't want to discard. So add an errp parameter to
preallocate_co().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Limiting the allocation to INT_MAX bytes isn't particularly clever
because it means that the final cluster will be a partial cluster which
will be completed through a COW operation. This results in unnecessary
data read and write requests which lead to an unwanted non-sparse
filesystem block for metadata preallocation.
Align the maximum allocation size down to the cluster size to avoid this
situation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:
$ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nbd'
image: nbd+unix://?socket=/tmp/nbdkitHSAzNz/socket
file format: raw
virtual size: -8388607T (9223372036854775296 bytes)
disk size: unavailable
But there's no reason to have two separate implementations of integer
to human-readable abbreviation, where one has overflow and stops at
'T', while the other avoids overflow and goes all the way to 'E'. With
this patch, the output now claims 8EiB instead of -8388607T, which
really is the correct rounding of largest file size supported by qemu
(we could go 511 bytes larger if we used byte-accurate sizing instead
of rounding up to the next sector boundary, but that wouldn't change
the human-readable result).
Quite a few iotests need updates to expected output to match.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Using IEC binary prefixes in order to make the code more readable,
with the exception of DEFAULT_LOG_SIZE because it's passed to
stringify().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
IEC binary prefixes are already defined in "qemu/units.h",
so we can remove redundant definitions in "block/vhdx.h".
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b69864e5a ("vmdk: Support version=3 in VMDK descriptor files")
fixed the probe function to correctly guess vmdk descriptors with
version=3.
This solves the issue where vmdk snapshot with parent vmdk descriptor
containing "version=3" would be treated as raw instead vmdk.
In the future case where a new vmdk version is introduced, we will again
experience this issue, even if the user will provide "-f vmdk" it will
only apply to the tip image and not to the underlying "misprobed" parent
image.
The code in vmdk.c already assumes that the backing file of vmdk must be
vmdk (see vmdk_is_cid_valid which returns 0 if backing file is not
vmdk).
So let's make it official by supplying the backing_format as vmdk.
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-By: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Shmuel Eiderman <shmuel.eiderman@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Concurrent IO becomes serial IO because of the qemu Coroutine lock,
which reduce IO performance severely.
So unlock Coroutine lock before bdrv_co_pwritev and
bdrv_co_preadv to fix it.
Signed-off-by: Zhengui li <lizhengui@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_snapshot_dump(), bdrv_image_info_specific_dump(),
bdrv_image_info_dump() and their helpers take an fprintf()-like
callback and a FILE * to pass to it.
hmp.c passes monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
qemu-img.c and qemu-io-cmds.c pass fprintf and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-8-armbru@redhat.com>
Callbacks ssh_co_readv(), ssh_co_writev(), ssh_co_flush() report
errors to the user with error_printf(). They shouldn't, it's their
caller's job. Replace by a suitable trace point. While there, drop
the unreachable !s->sftp case.
Perhaps we should convert this part of the block driver interface to
Error, so block drivers can pass more detail to their callers. Not
today.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190417190641.26814-3-armbru@redhat.com>
With an external data file, preallocate_co() must write the final byte
to the external data file, not to the qcow2 image file.
This is harmless for preallocation of newly created images (only the
qcow2 file size is increased to the virtual disk size while it should be
much smaller), but with preallocated resize, it could in theory cause
visible corruption if the metadata of the image is larger than the data
(e.g. lots of bitmaps).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 6585493369 added code to freeze
the backing chain from 'top' to 'base' for the duration of the
block-stream job.
The problem is that the freezing happens too late in stream_start():
during the bdrv_reopen_set_read_only() call earlier in that function
another job can jump in and remove the base image. If that happens we
have an invalid chain and QEMU crashes.
This patch puts the bdrv_freeze_backing_chain() call at the beginning
of the function.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_replace_child() calls bdrv_check_perm() with error_abort on
loosening permissions. However file-locking operations may fail even
in this case, for example on NFS. And this leads to Qemu crash.
Let's avoid such errors. Note, that we ignore such things anyway on
permission update commit and abort.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Several versions of GlusterFS (3.12? -> 6.0.1) fail when the
transfer size is greater or equal to 1024 MiB, so we are
limiting the transfer size to 512 MiB to avoid this rare issue.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1691320
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just as we recently added a trace for a server sending block status
that doesn't match the server's advertised minimum block alignment,
let's do the same for read chunks. But since qemu 3.1 is such a
server (because it advertised 512-byte alignment, but when serving a
file that ends in data but is not sector-aligned, NBD_CMD_READ would
detect a mid-sector change between data and hole at EOF and the
resulting read chunks are unaligned), we don't want to change our
behavior of otherwise tolerating unaligned reads.
Note that even though we fixed the server for 4.0 to advertise an
actual block alignment (which gets rid of the unaligned reads at EOF
for posix files), we can still trigger it via other means:
$ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file
Arguably, that is a bug in the blkdebug block status function, for
leaking a block status that is not aligned. It may also be possible to
observe issues with a backing layer with smaller alignment than the
active layer, although so far I have been unable to write a reliable
iotest for that scenario.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190330165349.32256-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The next patch needs access to a device's minimum permitted
alignment, since NBD wants to advertise this to clients. Add
an accessor function, borrowing from blk_get_max_transfer()
for accessing a backend's block limits.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190329042750.14704-6-eblake@redhat.com>
If an NBD server advertises a size that is not a multiple of a sector,
the block layer rounds up that size, even though we set info.size to
the exact byte value sent by the server. The block layer then proceeds
to let us read or query block status on the hole that it added past
EOF, which the NBD server is unlikely to be happy with. Fortunately,
qemu as a server never advertizes an unaligned size, so we generally
don't run into this problem; but the nbdkit server makes it easy to
test:
$ printf %1000d 1 > f1
$ ~/nbdkit/nbdkit -fv file f1 & pid=$!
$ qemu-img convert -f raw nbd://localhost:10809 f2
$ kill $pid
$ qemu-img compare f1 f2
Pre-patch, the server attempts a 1024-byte read, which nbdkit
rightfully rejects as going beyond its advertised 1000 byte size; the
conversion fails and the output files differ (not even the first
sector is copied, because qemu-img does not follow ddrescue's habit of
trying smaller reads to get as much information as possible in spite
of errors). Post-patch, the client's attempts to read (and query block
status, for new enough nbdkit) are properly truncated to the server's
length, with sane handling of the hole the block layer forced on
us. Although f2 ends up as a larger file (1024 bytes instead of 1000),
qemu-img compare shows the two images to have identical contents for
display to the guest.
I didn't add iotests coverage since I didn't want to add a dependency
on nbdkit in iotests. I also did NOT patch write, trim, or write
zeroes - these commands continue to fail (usually with ENOSPC, but
whatever the server chose), because we really can't write to the end
of the file, and because 'qemu-img convert' is the most common case
where we care about being tolerant (which is read-only). Perhaps we
could truncate the request if the client is writing zeros to the tail,
but that seems like more work, especially if the block layer is fixed
in 4.1 to track byte-accurate sizing (in which case this patch would
be reverted as unnecessary).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-5-eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
It is desirable for 'qemu-img map' to have the same output for a file
whether it is served over file or nbd protocols. However, ever since
we implemented block status for NBD (2.12), the NBD protocol forgot to
inform the block layer that as the final layer in the chain, the
offset is valid; without an offset, the human-readable form of
qemu-img map gives up with the unhelpful:
$ nbdkit -U - data data="1" size=512 --run 'qemu-img map $nbd'
Offset Length Mapped to File
qemu-img: File contains external, encrypted or compressed clusters.
The --output=json form always works, because it is reporting the
lower-level bdrv_block_status results directly rather than trying to
filter out sparse ranges for human consumption - but now it also
shows the offset member.
With this patch, the human output changes to:
Offset Length Mapped to File
0 0x200 0 nbd+unix://?socket=/tmp/nbdkitOxeoLa/socket
This change is observable to several iotests.
Fixes: 78a33ab5
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We have a latent bug in our NBD client code, tickled by the brand new
nbdkit 1.11.10 block status support:
$ nbdkit --filter=log --filter=truncate -U - \
data data="1" size=511 truncate=64K logfile=/dev/stdout \
--run 'qemu-img convert $nbd /var/tmp/out'
...
qemu-img: block/io.c:2122: bdrv_co_block_status: Assertion `*pnum && QEMU_IS_ALIGNED(*pnum, align) && align > offset - aligned_offset' failed.
The culprit? Our implementation of .bdrv_co_block_status can return
unaligned block status for any server that operates with a lower
actual alignment than what we tell the block layer in
request_alignment, in violation of the block layer's constraints. To
date, we've been unable to trip the bug, because qemu as NBD server
always advertises block sizing (at which point it is a server bug if
the server sends unaligned status - although qemu 3.1 is such a server
and I've sent separate patches for 4.0 both to get the server to obey
the spec, and to let the client to tolerate server oddities at EOF).
But nbdkit does not (yet) advertise block sizing, and therefore is not
in violation of the spec for returning block status at whatever
boundaries it wants, and those unaligned results can occur anywhere
rather than just at EOF. While we are still wise to avoid sending
sub-sector read/write requests to a server of unknown origin, we MUST
consider that a server telling us block status without an advertised
block size is correct. So, we either have to munge unaligned answers
from the server into aligned ones that we hand back to the block
layer, or we have to tell the block layer about a smaller alignment.
Similarly, if the server advertises an image size that is not
sector-aligned, we might as well assume that the server intends to let
us access those tail bytes, and therefore supports a minimum block
size of 1, regardless of whether the server supports block status
(although we still need more patches to fix the problem that with an
unaligned image, we can send read or block status requests that exceed
EOF to the server). Again, qemu as server cannot trip this problem
(because it rounds images to sector alignment), but nbdkit advertised
unaligned size even before it gained block status support.
Solve both alignment problems at once by using better heuristics on
what alignment to report to the block layer when the server did not
give us something to work with. Note that very few NBD servers
implement block status (to date, only qemu and nbdkit are known to do
so); and as the NBD spec mentioned block sizing constraints prior to
documenting block status, it can be assumed that any future
implementations of block status are aware that they must advertise
block size if they want a minimum size other than 1.
We've had a long history of struggles with picking the right alignment
to use in the block layer, as evidenced by the commit message of
fd8d372d (v2.12) that introduced the current choice of forced 512-byte
alignment.
There is no iotest coverage for this fix, because qemu can't provoke
it, and I didn't want to make test 241 dependent on nbdkit.
Fixes: fd8d372d
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
The NBD spec is clear that a server that advertises a minimum block
size should reply to NBD_CMD_BLOCK_STATUS with extents aligned
accordingly. However, we know that the qemu NBD server implementation
has had a corner-case bug where it is not compliant with the spec,
present since the introduction of NBD_CMD_BLOCK_STATUS in qemu 2.12
(and unlikely to be patched in time for 4.0). Namely, when qemu is
serving a file that is not a multiple of 512 bytes, it rounds the size
advertised over NBD up to the next sector boundary (someday, I'd like
to fix that to be byte-accurate, but it's a much bigger audit not
appropriate for this release); yet if the final sector contains data
prior to EOF, lseek(SEEK_HOLE) will point to the implicit hole
mid-sector which qemu then reported over NBD.
We are well within our rights to hang up on a server that can't follow
the spec, but it is more useful to try and keep the connection alive
in spite of the problem. Do so by tracing a message about the problem,
and then either truncating the request back to an aligned boundary (if
it covered more than the final sector) or widening it out to the full
boundary with a forced status of data (since truncating would result
in 0 bytes, but we have to make progress, and valid since data is a
default-safe answer). And in practice, since the problem only happens
on a sector that starts with data and ends with a hole, we are going
to want to read that full sector anyway (where qemu as the server
fills in the tail beyond EOF with appropriate NUL bytes).
Easy reproduction:
$ printf %1000d 1 > file
$ qemu-nbd -f raw -t file & pid=$!
$ qemu-img map --output=json -f raw nbd://localhost:10809
qemu-img: Could not read file metadata: Invalid argument
$ kill $pid
where the patched version instead succeeds with:
[{ "start": 0, "length": 1024, "depth": 0, "zero": false, "data": true}]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190326171317.4036-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The NBD spec is clear that when structured replies are active, a
simple error reply is acceptable to any command except for
NBD_CMD_READ. However, we were mistakenly requiring structured errors
for NBD_CMD_BLOCK_STATUS, and hanging up on a server that gave a
simple error (since qemu does not behave as such a server, we didn't
notice the problem until now). Broken since its introduction in
commit 78a33ab5 (v2.12).
Noticed while debugging a separate failure reported by nbdkit while
working out its initial implementation of BLOCK_STATUS, although it
turns out that nbdkit also chose to send structured error replies for
BLOCK_STATUS, so I had to manually provoke the situation by hacking
qemu's server to send a simple error reply:
| diff --git i/nbd/server.c w/nbd/server.c
| index fd013a2817a..833288d7c45 100644
| 00--- i/nbd/server.c
| +++ w/nbd/server.c
| @@ -2269,6 +2269,8 @@ static coroutine_fn int nbd_handle_request(NBDClient *client,
| "discard failed", errp);
|
| case NBD_CMD_BLOCK_STATUS:
| + return nbd_co_send_simple_reply(client, request->handle, ENOMEM,
| + NULL, 0, errp);
| if (!request->len) {
| return nbd_send_generic_reply(client, request->handle, -EINVAL,
| "need non-zero length", errp);
|
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190325190104.30213-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
When the server replies with a (structured [*]) error to
NBD_CMD_BLOCK_STATUS, without any extent information sent first, the
client code was blindly throwing away the server's error code and
instead telling the caller that EIO occurred. This has been broken
since its introduction in 78a33ab5 (v2.12, where we should have called:
error_setg(&local_err, "Server did not reply with any status extents");
nbd_iter_error(&iter, false, -EIO, &local_err);
to declare the situation as a non-fatal error if no earlier error had
already been flagged, rather than just blindly slamming iter.err and
iter.ret), although it is more noticeable since commit 7f86068d, which
actually tries hard to preserve the server's code thanks to a separate
iter.request_ret.
[*] The spec is clear that the server is also permitted to reply with
a simple error, but that's a separate fix.
I was able to provoke this scenario with a hack to the server, then
seeing whether ENOMEM makes it back to the caller:
| diff --git a/nbd/server.c b/nbd/server.c
| index fd013a2817a..29c7995de02 100644
| --- a/nbd/server.c
| +++ b/nbd/server.c
| @@ -2269,6 +2269,8 @@ static coroutine_fn int nbd_handle_request(NBDClient *client,
| "discard failed", errp);
|
| case NBD_CMD_BLOCK_STATUS:
| + return nbd_send_generic_reply(client, request->handle, -ENOMEM,
| + "no status for you today", errp);
| if (!request->len) {
| return nbd_send_generic_reply(client, request->handle, -EINVAL,
| "need non-zero length", errp);
| --
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190325190104.30213-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Peter Maydell
Markus Armbruster
Alberto Garcia
Andrey Shinkevich
Max Reitz
Vladimir Sementsov-Ogievskiy
Kevin Wolf
Eric Blake
Stefano Garzarella
Sam Eiderman
Zhengui li