It eases code review, unit is explicit.
Patch generated using:
$ git grep -n '[<>][<>]= ?[1-5]0'
and modified manually.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-44-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kexec/kdump as well as the bootloader use a subcode of diagnose 308
that is supposed to reset the I/O subsystem but not comprise a full
"reboot". With the latest refactoring this is now broken when
-no-reboot is used or when libvirt acts on a reboot QMP event, for
example a virt-install from iso images.
We need to mark these "subsystem resets" as special.
Fixes: a30fb811cb (s390x: refactor reset/reipl handling)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180622102928.173420-1-borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With this flag, kvm allows guest to control host CPU power state. This
increases latency for other processes using same host CPU in an
unpredictable way, but if decreases idle entry/exit times for the
running VCPU, so to use it QEMU needs a hint about whether host CPU is
overcommitted, hence the flag name.
Follow-up patches will expose this capability to guest
(using mwait leaf).
Based on a patch by Wanpeng Li <kernellwp@gmail.com> .
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20180622192148.178309-2-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We currently have got three ways of turning on the HAX accelerator:
"-machine accel=hax", "-accel hax" and "-enable-hax". That's really
confusing and overloaded. Since "-accel" is our preferred way to enable
an accelerator nowadays, and "-accel hax" is even less to type than
"-enable-hax", let's deprecate the "-enable-hax" option now.
Note: While "-enable-kvm" is available since a long time and can hardly be
removed since it is used in a lot of upper layer tools and scripts, the
"-enable-hax" option is still rather new and not very widespread yet, so
I think that it should be OK if we remove this in a couple of releases again
(we'll see whether someone complains after seeing the deprecation message -
then we could still reconsider to keep it if there a well-founded reasons).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529950933-28347-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The oldest machine type which is still used in a still maintained distro
is a pc-0.12 based machine type in RHEL6, so everything that is older
than pc-0.12 should not be used anymore. Thus let's deprecate pc-0.10
and pc-0.11 so that we can finally remove them in a future release.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529917512-10528-1-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
some users when using --daemonize expect that QEMU will parse CLI options,
initialize VM and only then complete daemonzation by signalling lead
process to exit and start listening on monitor socket. So users treat
parent process exit as sync point to connect to QEMU's monitor.
That however doesn't work when --preconfig options is used, since it
provides monitor before completing daemonization and expects user to
issue exit-preconfig command when additional configuration via monitor
is finished. We also can't move completing daemonization before
preconfig monitor becomes available, since that would imply:
* partially loosing ability to configure QEMU instance in --preconfig
mode since QEMU might drop privileges, chroot and do other things
when daemonization is completed
* lead to loss of error messages in case they would happen after
daemonization
Be proactive now and make options mutually exclusive, so users would
get clear error message instead of waiting for lead process exit
indefinitely before connecting to monitor.
PS:
In case someone would come up with usecase where both options should
be enabled at the same time we could drop this restriction as far
as daemonization point is left where it is now (os_setup_post).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1529501059-163139-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
checkpatch reminds us that statics shouldn't be zero-initialized:
ERROR: do not initialise statics to 0 or NULL
#35: FILE: vl.c:157:
+static int num_serial_hds = 0;
ERROR: do not initialise statics to 0 or NULL
#36: FILE: vl.c:158:
+static Chardev **serial_hds = NULL;
I forgot to fix this in 6af2692e86f9fdfb3d; do so now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180426140253.3918-1-peter.maydell@linaro.org
Before this patch, monitor fd helpers might be called even earlier than
monitor_init_globals(). This can be problematic.
After previous work, now monitor_init_globals() does not depend on
accelerator initialization any more. Call it earlier (before CLI
parsing; that's where the monitor APIs might be called) to make sure it
is called before any of the monitor APIs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180608035511.7439-7-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
After 047f7038f5 it is possible for event loop to run two
times. First time whilst parsing command line options (the idea
is to bring up monitor early so that management applications can
tweak config before machine is initialized). And the second time
is after everything is set up (this is the usual place). In both
cases the event loop is called as main_loop_wait(nonblocking =
false) which causes the event loop to block until at least one
event occurred.
Now, consider that somebody (i.e. libvirt) calls us with
-daemonize. This operation is split in two steps. The main()
calls os_daemonize() which fork()-s and then waits in read()
until child notifies it via write():
/qemu.git $ ./x86_64-softmmu/qemu-system-x86_64 -S -daemonize \
-no-user-config -nodefaults -nographic
main(): child:
os_daemonize():
read(pipe[0])
main_loop():
main_loop_wait(false)
os_setup_post():
write(pipe[1])
main_loop():
main_loop_wait(false)
Here it can be clearly seen that main() does not exit until an
event occurs, but at the same time nobody will touch the monitor
socket until their exec("qemu-system-*") finishes. So the whole
thing deadlocks.
The solution is to not call main_loop_wait() unless --preconfig was
specified (in which case caller knows they must connect to the
socket before exec() finishes).
Patch also fixes hang when -nodefaults option is used, which were
causing QEMU hang in the early main_loop_wait() indefinitely by
the same means (not calling main_loop_wait() unless --preconfig
is present on CLI)
Based on
From: Michal Privoznik <mprivozn@redhat.com>
Subject: [PATCH] cli: Don't run early event loop if no --preconfig was specified
Message-Id: <ad910973c593c5ac2fed3a10ea958f7e9c12f82c.1527935663.git.mprivozn@redhat.com>
Fixes: 047f7038f5
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1528207243-268226-2-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is only ignored since QEMU version 1.7.0. Let's mark
it as deprecated, so that we can finally completely remove it soon.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1526990298-17924-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If CONFIG_SECCOMP is undefined, the option 'elevatedprivileges' remains
compiled. This would make libvirt set the corresponding capability and
then trigger failure during guest startup. This patch moves the code
regarding seccomp command line options to qemu-seccomp.c file and
wraps qemu_opts_foreach finding sandbox option with CONFIG_SECCOMP.
Because parse_sandbox() is moved into qemu-seccomp.c file, change
seccomp_start() to static function.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
If CONFIG_SECCOMP is undefined, the option 'elevateprivileges' remains
compiled. This would make libvirt set the corresponding capability and
then trigger failure during guest startup. This patch moves the code
regarding seccomp command line options to qemu-seccomp.c file and
wraps qemu_opts_foreach finding sandbox option with CONFIG_SECCOMP.
Because parse_sandbox() is moved into qemu-seccomp.c file, change
seccomp_start() to static function.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Message-Id: <20180531032937.1925-1-zyimin@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine jumps
into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and additionally
configure it using previous query results within one QEMU instance
(i.e. eliminate the need to start QEMU twice, 1st to query board specific
parameters and 2nd for actual VM start using query results for
additional parameters).
The new option complements -S option and could be used with or without
it. The difference is that -S pauses QEMU when the machine is completely
initialized with all devices wired up and ready to execute guest code
(QEMU needs only to unpause VCPUs to let guest execute its code),
while the "preconfig" option pauses QEMU early before board specific init
callback (machine_run_board_init) is executed and allows the configuration
of machine parameters which will be used by board init code.
When early introspection/configuration is done, command 'exit-preconfig'
should be used to exit RUN_STATE_PRECONFIG and transition to the next
requested state (i.e. if -S is used then QEMU will pause the second
time when board/device initialization is completed or start guest
execution if -S isn't provided on CLI)
PS:
Initially 'preconfig' is planned to be used for configuring numa
topology depending on board specified possible cpus layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that we cancel all jobs and not only block jobs on shutdown, doing
that in bdrv_close_all() isn't really appropriate any more. Move the
job_cancel_sync_all() call to the callers, and only assert that there
are no job running in bdrv_close_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After 1217d6ca2b we error out
explicitly if an unknown -option was passed on the command line.
However, we are doing two pass command line option parsing. In
the first pass we just look for -no-user-config or -nodefconfig
being present which determines whether we load user config or
not. Then in the second pass we finally parse everything else
throwing an error if an unsupported -option was found. Problem is
that in the second pass -no-user-config and -nodefconfig are not
handled explicitly which makes us throw the unsupported option
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add comments to the cases not (yet) switched
over to parse_display_qapi().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507095539.19584-5-kraxel@redhat.com
Drop the gtk option parser from parse_display(), so parse_display_qapi()
will handle it instead.
With this change the parser will accept gl=core and gl=es too, gtk
must catch the unsupported gles variant now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180507095539.19584-4-kraxel@redhat.com
Drop the option-less display types (egl-headless, curses, none) from
parse_display(), so they'll be handled by parse_display_qapi().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180507095539.19584-3-kraxel@redhat.com
Add parse_display_qapi() function which parses the -display command line
using a qapi visitor for DisplayOptions. Wire up as default catch in
parse_display().
Improves the error message for unknown display types.
Also enables json as -display argument, i.e. -display "{ 'type': 'gtk' }"
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180507095539.19584-2-kraxel@redhat.com
We've never documented this option in our qemu-doc, so apart from the users
that already used the old qemu-kvm fork before, most users should not be
aware of this option at all. It's been marked as deprecated in the source
code for a long time already, and officially marked as deprecated in the
documentation since QEMU v2.10, so it should be fine to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deprecated since the beginning when it was added for compatibility with
the ancient qemu-kvm fork of QEMU, and it even printed out the deprecation
warning since right from the start (i.e. QEMU v1.3.0), so it's really time
to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dangling remainder of the -tdf option revealed a deficiency in our
option parsing: Options that have been declared, but are not supported
in the switch-case statement in vl.c and not handled in the OS-specifc
os_parse_cmd_args() functions are currently silently ignored. We should
rather tell the users that they specified something that we can not
handle, so let's print an error message and exit instead.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu-doc already states that this option is only maintained for
backward compatibility and "-device virtconsole" should be used
instead. So let's take the next step and mark this option officially
as deprecated.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525446790-16139-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will be able to have memory devices (e.g. virtio) not requiring the
slot parameter (e.g. not exposed via ACPI). We still need the maxmem
parameter to setup a proper memory region for device memory. And some
architectures (e.g. s390x) will have to set up the maximum possible guest
address space size based on the maxmem parameter.
As far as I can see, all code (pc.c,spapr.c,ACPI code) should handle
!slots just fine, even though maxmem is set.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-12-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The consoles ("sclpconsole" and "sclplmconsole") can only be configured
with "-device" and "-chardev" so far. Other machines use the convenience
option "-serial" to configure the default consoles, even for virtual
consoles like spapr-vty on the pseries machine. So let's support this
option on s390x, too. This way we can easily enable the serial console
here again with "-nodefaults", for example:
qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio
... which is way shorter than typing:
qemu-system-s390x -no-shutdown -nographic -nodefaults \
-chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \
-mon chardev=c1
The -serial parameter can also be used if you only want to see the QEMU
monitor on stdio without using -nodefaults, but not the console output.
That's something that is pretty impossible with the current code today:
qemu-system-s390x -no-shutdown -nographic -serial none
While we're at it, this patch also maps the second -serial option to the
"sclplmconsole", so that there is now an easy way to configure this second
console on s390x, too, for example:
qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio
Additionally, the new code is also smaller than the old one and we have
less s390x-specific code in vl.c :-)
I've also checked that migration still works as expected by migrating
a guest with console output back and forth between a qemu-system-s390x
that has this patch and an instance without this patch.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
v2: Rebase on top of master
v3: Fix the json format (Eric Blake)
Fix a comparison issue (Gerd Hoffmann)
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Message-id: 20180413135842.21325-2-tournier.elie@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is called just before os_setup_post. Currently none of the
accelerators provide this hook, but the Xen one is going to provide
one in a moment.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Create a new function serial_max_hds() which returns the number of
serial ports defined by the user. This is needed only by spapr.
This allows us to remove the MAX_SERIAL_PORTS define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-14-peter.maydell@linaro.org
Instead of having a fixed sized global serial_hds[] array,
use a local dynamically reallocated one, so we don't have
a compile time limit on how many serial ports a system has.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-13-peter.maydell@linaro.org
Provide an accessor function serial_hd() to return the Chardev
(if any) associated with the numbered serial port. This will
be used to replace direct accesses to the serial_hds[] array,
so that calling code doesn't need to care about the size of
that array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420145249.32435-7-peter.maydell@linaro.org
Since the commit:
commit 4486e89c21
Author: Stefan Hajnoczi <stefanha@redhat.com>
Date: Wed Mar 7 14:42:05 2018 +0000
vl: introduce vm_shutdown()
GDB crashes when qemu exits (at least on sparc-softmmu):
Remote communication error. Target disconnected.: Connection reset by peer.
Quitting: putpkt: write failed: Broken pipe.
So send a packet to exit GDB before we exit QEMU:
[Inferior 1 (Thread 0) exited normally]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 1521538773-30802-1-git-send-email-frederic.konrad@adacore.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add new parameter to optionally enable Out-Of-Band for a QMP server.
An example command line:
./qemu-system-x86_64 -chardev stdio,id=char0 \
-mon chardev=char0,mode=control,x-oob=on
By default, Out-Of-Band is off.
It is not allowed if either MUX or non-QMP is detected, since
Out-Of-Band is currently only for QMP, and non-MUX chardev backends.
Note that the client STILL has to request 'oob' during qmp_capabilities;
in part because the x-oob command line option may disappear in the
future if we decide the capabilities negotiation is sufficient.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180326063901.27425-4-peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: enhance commit message]
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a notifier chain for postcopy with a 'reason' flag
and an opportunity for a notifier member to return an error.
Call it when enabling postcopy.
This will initially used to enable devices to declare they're unable
to postcopy and later to notify of devices of stages within postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are many places where the monitor initializes its globals:
- monitor_init_qmp_commands() at the very beginning
- single function to init monitor_lock
- in the first entry of monitor_init() using "is_first_init"
Unify them a bit.
monitor_lock is not used before monitor_init() (as confirmed by code
analysis and gdb watchpoints); so we are safe delaying what was a
constructor-time initialization of the mutex into the later first call
to monitor_init().
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
With all targets defining CPU_RESOLVING_TYPE, refactor
cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model)
so that callers won't have to know internal resolving cpu
type. Place it in exec.c so it could be called from both
target independed vl.c and *-user/main.c.
That allows us to stop abusing cpu type from
MachineClass::default_cpu_type
as resolver class in vl.c which were confusing part of
cpu_parse_cpu_model().
Also with new parse_cpu_model(), the last users of cpu_init()
in null-machine.c and bsd/linux-user targets could be switched
to cpu_create() API and cpu_init() API will be removed by
follow up patch.
With no longer users left remove MachineState::cpu_model field,
new code should use MachineState::cpu_type instead and
leave cpu_model parsing to generic code in vl.c.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com>
[ehabkost: Fix bsd-user build error]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Postcopy migration of dirty bitmaps. Only named dirty bitmaps are migrated.
If destination qemu is already containing a dirty bitmap with the same name
as a migrated bitmap (for the same node), then, if their granularities are
the same the migration will be done, otherwise the error will be generated.
If destination qemu doesn't contain such bitmap it will be created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-12-vsementsov@virtuozzo.com
[Changed '+' to '*' as per list discussion. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have that variable but not exported. Export that so modules can have
a way to poke on whether machine init has finished.
Meanwhile, set that up even before calling the notifiers, so that
notifiers who may depend on this field will get a correct answer.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-2-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 00d09fdbba ("vl: pause vcpus before
stopping iothreads") and commit dce8921b2b
("iothread: Stop threads before main() quits") tried to work around the
fact that emulation was still active during termination by stopping
iothreads. They suffer from race conditions:
1. virtio_scsi_handle_cmd_vq() racing with iothread_stop_all() hits the
virtio_scsi_ctx_check() assertion failure because the BDS AioContext
has been modified by iothread_stop_all().
2. Guest vq kick racing with main loop termination leaves a readable
ioeventfd that is handled by the next aio_poll() when external
clients are enabled again, resulting in unwanted emulation activity.
This patch obsoletes those commits by fully disabling emulation activity
when vcpus are stopped.
Use the new vm_shutdown() function instead of pause_all_vcpus() so that
vm change state handlers are invoked too. Virtio devices will now stop
their ioeventfds, preventing further emulation activity after vm_stop().
Note that vm_stop(RUN_STATE_SHUTDOWN) cannot be used because it emits a
QMP STOP event that may affect existing clients.
It is no longer necessary to call replay_disable_events() directly since
vm_shutdown() does so already.
Drop iothread_stop_all() since it is no longer used.
Cc: Fam Zheng <famz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20180307144205.20619-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are two issues with the documentation of the --balloon parameter:
First, "--balloon none" is simply doing nothing. Even if a machine had a
balloon device by default, this option is not disabling anything, it is
simply ignored. Thus let's simply drop this option from the documentation
to avoid to confuse the users (but keep the code in vl.c for backward
compatibility).
Second, the documentation claims that "--balloon virtio" is the default
mode, but this is not true anymore since commit 382f074371.
Since that commit, the option also has no real use case anymore, since
you can simply use "--device virtio-balloon" nowadays instead. Thus to
simplify our complex parameter zoo a little bit, let's deprecate the
the parameter now and tell the user to use "--device virtio-balloon"
instead.
Fixes: 382f074371
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519796303-13257-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These options have been marked in a comment in qemu-options.hx as
deprecated in 2009 already (see commit 1ed2fc1fa3), but we
never informed the users about these deprecations. Let's catch up
on that omission now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519138892-12836-1-git-send-email-thuth@redhat.com>
[Fix messages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Automatic creation of SCSI controllers for "-drive if=scsi" for x86
machines was quite a bad idea (see description of commit f778a82f0c
for details). This is marked as deprecated since QEMU v2.9.0, and as
far as I know, nobody complained that this is still urgently required
anymore. Time to remove this now.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519123357-13225-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
