bdrv_co_get_block_status_from_file() and
bdrv_co_get_block_status_from_backing() set *file to bs->file and
bs->backing respectively, so that bdrv_co_get_block_status() can recurse
to them. Future block drivers won't have to duplicate code to implement
this.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is not used anywhere, so remove it.
Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy. This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change. Host floppy pass-through
was dropped in commit f709623. bdrv_media_changed() has never been
used for anything else. Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following functions fail if bs->drv is a filter and does not
implement them:
bdrv_probe_blocksizes
bdrv_probe_geometry
bdrv_truncate
bdrv_has_zero_init
bdrv_get_info
Instead, the call should be passed to bs->file if it exists, to allow
filter drivers to support those methods without implementing them. This
commit makes `drv->is_filter = true` imply that these callbacks will be
forwarded to bs->file by default, so disabling support for these
functions must be done explicitly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is not used anymore since c01c214b69 ("block: remove all encryption
handling APIs", 2017-07-11).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
This will let the callback take a CoMutex in the next patch.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-8-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_measure() provides a conservative maximum for the size of a new
image. This information is handy if storage needs to be allocated (e.g.
a SAN or an LVM volume) ahead of time.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-2-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Interface for removing persistent bitmap from its storage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-28-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be needed to check some restrictions before making bitmap
persistent in qmp-block-dirty-bitmap-add (this functionality will be
added by future patch)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-22-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add format driver handler, which should mark loaded read-only
bitmaps as 'IN_USE' in the image and unset read_only field in
corresponding BdrvDirtyBitmap's.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-14-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Start removing migration code from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The file drivers' *_parse_filename() implementations just strip the
optional protocol prefix off the filename. However, for e.g.
"file:foo:bar", this would lead to "foo:bar" being stored as the BDS's
filename which looks like it should be managed using the "foo" protocol.
This is especially troublesome if you then try to resolve a backing
filename based on "foo:bar".
This issue can only occur if the stripped part is a relative filename
("file:/foo:bar" will be shortened to "/foo:bar" and having a slash
before the first colon means that "/foo" is not recognized as a protocol
part). Therefore, we can easily fix it by prepending "./" to such
filenames.
Before this patch:
$ ./qemu-img create -f qcow2 backing.qcow2 64M
Formatting 'backing.qcow2', fmt=qcow2 size=67108864 encryption=off
cluster_size=65536 lazy_refcounts=off refcount_bits=16
$ ./qemu-img create -f qcow2 -b backing.qcow2 file🔝image.qcow2
Formatting 'file🔝image.qcow2', fmt=qcow2 size=67108864
backing_file=backing.qcow2 encryption=off cluster_size=65536
lazy_refcounts=off refcount_bits=16
$ ./qemu-io file🔝image.qcow2
can't open device file🔝image.qcow2: Could not open backing file:
Unknown protocol 'top'
After this patch:
$ ./qemu-io file🔝image.qcow2
[no error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170522195217.12991-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We had some conflicting documentation: a nice 8-way table that
described all possible combinations of DATA, ZERO, and
OFFSET_VALID, contrasted with text that implied that OFFSET_VALID
always meant raw data could be read directly. Furthermore, the
text refers a lot to bs->file, even though the interface was
updated back in 67a0fd2a to let the driver pass back a specific
BDS (not necessarily bs->file). As the 8-way table is the
intended semantics, simplify the rest of the text to get rid of
the confusion.
ALLOCATED is always set by the block layer for convenience (drivers
do not have to worry about it). RAW is used only internally, but
by more than the raw driver. Document these additional items on
the driver callback.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-4-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With image locking, permissions affect other qemu processes as well. We
want to be sure that the destination can run, so let's drop permissions
on the source when migration completes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of manually calling blk_resume_after_migration() in migration
code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend
activation with cache invalidation into a single function. This is
achieved with a new callback in BdrvChildRole that is called by
bdrv_invalidate_cache_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Klim Kireev <proffk@virtuozzo.mipt.ru>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Message-id: 1491405505-31620-2-git-send-email-den@openvz.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_child_set_perm alone is not very usable because the caller must
call bdrv_child_check_perm first. This is already encapsulated
conveniently in bdrv_child_try_set_perm, so remove the other prototypes
from the header and fix the one wrong caller, block/mirror.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When adding an Error parameter, bdrv_replace_in_backing_chain() would
become nothing more than a wrapper around change_parent_backing_link().
So make the latter public, renamed as bdrv_replace_node(), and remove
bdrv_replace_in_backing_chain().
Most of the callers just remove a node from the graph that they just
inserted, so they can use &error_abort, but completion of a mirror job
with 'replaces' set can actually fail.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
change_parent_backing_link() will need to update multiple BdrvChild
objects at once. Checking permissions reference by reference doesn't
work because permissions need to be consistent only with all parents
moved to the new child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-commit allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-mirror allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Backing files are somewhat special compared to other kinds of children
because they are attached and detached using bdrv_set_backing_hd()
rather than the normal set of functions, which does a few more things
like setting backing blockers, toggling the BDRV_O_NO_BACKING flag,
setting parent_bs->backing_file, etc.
These special features are a reason why change_parent_backing_link()
can't handle backing files yet. With abstracting the additional features
into .attach/.detach callbacks, we get a step closer to a function that
can actually deal with this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
When the parents' child links are updated in bdrv_append() or
bdrv_replace_in_backing_chain(), this should affect all child links of
BlockBackends or other nodes, but not on child links held for other
purposes (like for setting permissions). This patch allows to control
the behaviour per BdrvChildRole.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
For meaningful error messages in the permission system, we need to get
some human-readable description of the parent of a BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Some devices allow a media change between read-only and read-write
media. They need to adapt the permissions in their .change_media_cb()
implementation, which can fail. So add an Error parameter to the
function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
vvfat is the last remaining driver that can have children, but doesn't
implement .bdrv_child_perm() yet. The default handlers aren't suitable
here, so let's implement a very simple driver-specific one that protects
the internal child from being used by other users as good as our
permissions permit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Almost all format drivers have the same characteristics as far as
permissions are concerned: They have one or more children for storing
their own data and, more importantly, metadata (can be written to and
grow even without external write requests, must be protected against
other writers and present consistent data) and optionally a backing file
(this is just data, so like for a filter, it only depends on what the
parent nodes need).
This provides a default implementation that can be shared by most of
our format drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Most filters need permissions related to read and write for their
children, but only if the node has a parent that wants to use the same
operation on the filter. The same is true for resize.
This adds a default implementation that simply forwards all necessary
permissions to all children of the node and leaves the other permissions
unchanged.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In many cases, the required permissions of one node on its children
depend on what its parents require from it. For example, the raw format
or most filter drivers only need to request consistent reads if that's
something that one of their parents wants.
In order to achieve this, this patch introduces two new BlockDriver
callbacks. The first one lets drivers first check (recursively) whether
the requested permissions can be set; the second one actually sets the
new permission bitmask.
Also add helper functions that drivers can use in their implementation
of the callbacks to update their permissions on a specific child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When attaching a node as a child to a new parent, the required and
shared permissions for this parent are checked against all other parents
of the node now, and an error is returned if there is a conflict.
This allows error returns to a function that previously always
succeeded, and the same is true for quite a few callers and their
callers. Converting all of them within the same patch would be too much,
so for now everyone tells that they don't need any permissions and allow
everyone else to do anything. This way we can use &error_abort initially
and convert caller by caller to pass actual permission requirements and
implement error handling.
All these places are marked with FIXME comments and it will be the job
of the next patches to clean them up again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-19-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_io_plug and bdrv_io_unplug are only called (via their
BlockBackend equivalents) after starting asynchronous I/O.
bdrv_drain is not going to be called while they are running,
because---even if a coroutine runs for some reason---it will
only drain in the next iteration of the event loop through
bdrv_co_yield_to_drain.
So this mechanism is unnecessary, get rid of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161129113334.605-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These files deal with the file protocol, not the raw format (the
file protocol is often used with other formats, and the raw
format is not forced to use the file protocol). Rename things
to make it a bit easier to follow.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
