Commit Graph

333 Commits

Author SHA1 Message Date
Stefan Hajnoczi 1e81aba5ac net: simplify net_client_init1()
Drop the union and move the hubport creation into the !is_netdev case.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-6-git-send-email-stefanha@redhat.com
2015-06-24 16:33:42 +01:00
Stefan Hajnoczi 4ef0defbad net: drop if expression that is always true
Both is_netdev and !is_netdev paths already check that
net_client_init_func[opts->kind] is non-NULL so there is no need for the
if statement.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-5-git-send-email-stefanha@redhat.com
2015-06-24 16:33:27 +01:00
Stefan Hajnoczi d139e9a6cf net: raise an error if -net type is invalid
When a -net type is used that was not compiled into the binary there
should be an error message.

Note the special case for -net none, which is a no-op.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-4-git-send-email-stefanha@redhat.com
2015-06-24 16:33:20 +01:00
Stefan Hajnoczi 1322629b4f net: replace net_client_init1() netdev whitelist with blacklist
It's cumbersome to keep the whitelist up-to-date.  New netdev backends
should most likely be allowed so a blacklist makes more sense than a
whitelist.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1432743412-15943-3-git-send-email-stefanha@redhat.com
2015-06-24 16:30:29 +01:00
Stefan Hajnoczi 027a247bbf net: add missing "netmap" to host_net_devices[]
Although hmp-commands.hx lists "netmap" as a valid host_net_add type,
the command rejects it because it's missing from the list.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1432743412-15943-2-git-send-email-stefanha@redhat.com
2015-06-24 16:29:07 +01:00
Markus Armbruster a0b1a66ea3 Include monitor/monitor.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 485febc6d1 qmp: Wean off qerror_report()
The traditional QMP command handler interface

    int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);

doesn't provide for returning an Error object.  Instead, the handler
is expected to stash it in the monitor with qerror_report().

When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one.  More than
three years later, we're still using it.

Middle mode has two effects:

* Instead of the native input marshallers

      static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)

  it generates input marshallers conforming to the traditional QMP
  command handler interface.

* It suppresses generation of code to register them with
  qmp_register_command()

  This permits giving them internal linkage.

As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.

The former has to go to get rid of qerror_report().  Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().

Switch middle mode to generate native input marshallers, and adapt the
stragglers.  Simplifies both the monitor code and the stragglers.

Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster c6bd8c706a qerror: Clean up QERR_ macros to expand into a single string
These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 75158ebbe2 qerror: Eliminate QERR_DEVICE_NOT_FOUND
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code.  Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left.  Eliminate it with this
coccinelle semantic patch:

    @@
    expression EP, E;
    @@
    -error_set(EP, QERR_DEVICE_NOT_FOUND, E)
    +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Markus Armbruster 70b9433109 QemuOpts: Wean off qerror_report_err()
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP.  It should not be used
elsewhere.

The only remaining user in qemu-option.c is qemu_opts_parse().  Is it
used in QMP context?  If not, we can simply replace
qerror_report_err() by error_report_err().

The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.

The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.

Remaining uses:

* drive_def(): Command line -drive and such, HMP drive_add and pci_add

* hmp_chardev_add(): HMP chardev-add

* monitor_parse_command(): HMP core

* tmp_config_parse(): Command line -tpmdev

* net_host_device_add(): HMP host_net_add

* net_client_parse(): Command line -net and -netdev

* qemu_global_option(): Command line -global

* vnc_parse_func(): Command line -display, -vnc, default display, HMP
  change, QMP change.  Bummer.

* qemu_pci_hot_add_nic(): HMP pci_add

* usb_net_init(): Command line -usbdevice, HMP usb_add

Propagate errors through qemu_opts_parse().  Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err().  Switch all non-QMP users outside tests to it.

That leaves vnc_parse_func().  Propagate errors through it.  Since I'm
touching it anyway, rename it to vnc_parse().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:39 +02:00
Peter Maydell 89e9429c3c virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
 +0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
 5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
 cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
 BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
 sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
 =tju/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci fixes, enhancements

Most notably this includes virtio cross-endian patches.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost: enable vhost without without MSI-X
  pci: Don't register a specialized 'config_write' if default behavior is intended
  hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
  vhost_net: re-enable when cross endian
  vhost-net: tell tap backend about the vnet endianness
  tap: fix non-linux build
  tap: add VNET_LE/VNET_BE operations
  vhost: set vring endianness for legacy virtio
  virtio: introduce virtio_legacy_is_cross_endian()
  linux-headers: sync vhost.h
  vhost-user: part of virtio

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 11:30:57 +01:00
Pankaj Gupta 1e7398a140 vhost: enable vhost without without MSI-X
We use vhostforce to enable vhost even if Guests don't have MSI-X
support and we fall back to QEMU virtio-net.

This gives a very small performance gain, but the disadvantage
is that guest now controls which virtio code is running
(qemu or vhost) so our attack surface is doubled.

This patch will enable vhost unconditionally whenever it's requested.
For compatibility, enable vhost when vhostforce is set, as well.

Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-19 12:17:49 +02:00
Michael S. Tsirkin 4ee9b43be9 tap: fix non-linux build
tap_fd_set_vnet_le/tap_fd_set_vnet_be was missing,
fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-06-19 12:17:25 +02:00
Greg Kurz c80cd6bb9c tap: add VNET_LE/VNET_BE operations
The linux tap and macvtap backends can be told to parse vnet headers
according to little or big endian. This is done through the TUNSETVNETLE
and TUNSETVNETBE ioctls.

This patch brings all the plumbing for QEMU to use these APIs.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-17 17:12:54 +02:00
Fam Zheng 82e1cc4bf9 Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
Done with following Coccinelle semantic patch, plus manual cosmetic changes in
net/*.c.

    @@
    expression E1, E2, E3, E4;
    @@
    -   qemu_set_fd_handler2(E1, NULL, E2, E3, E4);
    +   qemu_set_fd_handler(E1, E2, E3, E4);

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng a90a7425cf tap: Drop tap_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-7-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng 6e99c631f1 net/socket: Drop net_socket_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be sent to peer when it arrives. If the device can't
receive, it will be queued to incoming_queue, and when the device status
changes, this queue will be flushed.

If the peer is not ready, disable the read poll until send completes.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-6-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng e8dd1d9c39 netmap: Drop netmap_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->iov when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.

Also remove the qemu_can_send_packet() check in netmap_send. If it's
true, we are good; if it's false, the qemu_sendv_packet_async would
return 0 and read poll will be disabled until netmap_send_completed is
called.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-5-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Fam Zheng 95b1416ae9 l2tpv3: Drop l2tpv3_can_send
This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.

This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->msgvec when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:26:21 +01:00
Markus Armbruster 8190483196 vhost-user: Improve -netdev/netdev_add/-net/... error reporting
When -netdev vhost-user fails, it first reports a specific error, then
one or more generic ones, like this:

    $ qemu-system-x86_64 -netdev vhost-user,id=foo,chardev=xxx
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: chardev "xxx" not found
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: No suitable chardev found
    qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: Device 'vhost-user' could not be initialized

With the command line, the messages go to stderr.  In HMP, they go to
the monitor.  In QMP, the last one becomes the error reply, and the
others go to stderr.

Convert net_init_vhost_user() and its helpers to Error.  This
suppresses the unwanted unspecific error messages, and makes the
specific error the QMP error reply.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-09 07:40:24 +02:00
Markus Armbruster 71df1d8337 QemuOpts: Convert qemu_opt_foreach() to Error
Retain the function value for now, to permit selective conversion of
its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Markus Armbruster 1640b200d5 QemuOpts: Drop qemu_opt_foreach() parameter abort_on_failure
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.

The two callers that pass zero could just as well pass one:

* qemu_spice_init()'s callback add_channel() either returns zero or
  exit()s.

* config_write_opts()'s callback config_write_opt() always returns
  zero.

Drop the parameter, and always stop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Markus Armbruster 28d0de7a4f QemuOpts: Convert qemu_opts_foreach() to Error
Retain the function value for now, to permit selective conversion of
its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-09 07:37:37 +02:00
Markus Armbruster a4c7367f7d QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failure
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values.  Funky :)

The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:

* qemu_add_globals()'s callback qdev_add_one_global()

* qemu_config_write()'s callback config_write_opts()

* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
  vnc_init_func()

Drop the parameter, and always stop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-08 19:33:20 +02:00
Michael Tokarev 8b8f1c7e9d slirp: use less predictable directory name in /tmp for smb config (CVE-2015-4037)
In this version I used mkdtemp(3) which is:

        _BSD_SOURCE
        || /* Since glibc 2.10: */
            (_POSIX_C_SOURCE >= 200809L || _XOPEN_SOURCE >= 700)

(POSIX.1-2008), so should be available on systems we care about.

While at it, reset the resulting directory name within smb structure
on error so cleanup function wont try to remove directory which we
failed to create.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-06-03 14:21:45 +03:00
Ouyang Changchun 830d70db69 vhost-user: add multi queue support
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.

Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01 14:18:55 +02:00
Shannon Zhao 2bc22a58e1 net/net: Record usage status of mac address
Currently QEMU dynamically generates mac address for the NIC which
doesn't specify the mac address. But when we hotplug a NIC without
specifying mac address, the mac address will increase for the same NIC
along with hotplug and hot-unplug, and at last it will overflow. And if
we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then
hotplug one NIC without specifying mac address and the mac address of
the hotplugged NIC is duplicate of "52:54:00:12:34:56".

This patch add a mac_table to record the usage status and free the mac
address when the NIC is unrealized.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster a308817743 tap: Improve -netdev/netdev_add/-net/... tap error reporting
When -netdev tap fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -netdev tap,id=foo
    qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted
    qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized

With the command line, the messages go to stderr.  In HMP, they go to
the monitor.  In QMP, the second one becomes the error reply, and the
first one goes to stderr.

Convert net_init_tap() to Error.  This suppresses the unwanted second
message, and makes the specific error the QMP error reply.

[Dropped duplicate "and" from error message as suggested by Eric Blake:
"ifname=, script=, downscript=, and vnet_hdr=, "
"queues=, and vhostfds= are invalid with helper="
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 95c35a74fe tap: Finish conversion of tap_open() to Error
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 576c6eb670 tap-solaris: Convert tap_open() to Error
Fixes inappropriate use of syslog().

Not fixed: leaks on error paths, suspicious non-fatal errors.  FIXMEs
added instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-14-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 4bce487e14 tap-bsd: Convert tap_open() to Error
Fixes inappropriate use of stderr in monitor command handler.

While there, improve some of the messages a bit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-13-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 47896e2fd3 tap-linux: Convert tap_open() to Error
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-12-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster 468dd82408 tap: Permit incremental conversion of tap_open() to Error
Convert the trivial ones immediately: tap-aix and tap-haiku.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:34:07 +01:00
Markus Armbruster ac4fcf5639 tap: Convert launch_script() to Error
Fixes inappropriate use of stderr in monitor command handler.

While there, improve the messages some.

[Fixed Error **err -> Error *err local variable that broke the build.
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-10-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 10:33:35 +01:00
Markus Armbruster 445f116cab tap: Convert net_init_tap_one() to Error
[Dropped %s from "tap: open vhost char device failed: %s" since
error_setg_errno() already prints a human-readable error string and
there is no format string argument.
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-9-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster 80b832c300 tap: Convert tap_set_sndbuf() to Error
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster a8a21be985 tap: Improve -netdev/netdev_add/-net/... bridge error reporting
When -netdev bridge fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -netdev bridge,id=foo
    failed to launch bridge helper
    qemu-system-x86_64: -netdev bridge,id=foo: Device 'bridge' could not be initialized

The first message goes to stderr.  Wrong for HMP, because errors need
to go to the monitor there.

The second message goes to stderr for -netdev, to the monitor for HMP
netdev_add, and becomes the error reply for QMP netdev_add.

Convert net_bridge_run_helper() to Error, and propagate its errors
through net_init_bridge().  This ensures the error gets reported where
the user is, and suppresses the unwanted second message.

While there, improve the error messages a bit.

The above example becomes:

    $ qemu-system-x86_64 -netdev bridge,id=foo
    qemu-system-x86_64: -netdev bridge,id=foo: bridge helper failed

net_init_tap() also uses net_bridge_run_helper().  Propagate its
errors there as well.  Improves reporting these errors with -netdev
tap & friends.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-7-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster da4a4eac26 tap: net_tap_fd_init() can't fail, drop dead error handling
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-6-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster 3791f83ca9 net/dump: Improve -net/host_net_add dump error reporting
When -net dump fails, it first reports a specific error, then a
generic one, like this:

    $ qemu-system-x86_64 -net dump,id=foo,file=/eperm
    qemu-system-x86_64: -net dump,id=foo,file=/eperm: -net dump: can't open /eperm
    qemu-system-x86_64: -net dump,id=foo,file=/eperm: Device 'dump' could not be initialized

Convert net_init_tap() to Error.  This suppresses the unwanted second
message.

Improve the error messages to include strerror(errno) where
appropriate.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-5-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster 6630886863 net: Improve -net nic error reporting
When -net nic fails, it first reports a specific error, then a generic
one, like this:

    $ qemu-system-x86_64 -net nic,netdev=nonexistent
    qemu-system-x86_64: -net nic,netdev=nonexistent: netdev 'nonexistent' not found
    qemu-system-x86_64: -net nic,netdev=nonexistent: Device 'nic' could not be initialized

Convert net_init_nic() to Error to get rid of the unwanted second
error message.

While there, tidy up an Overcapitalized Error Message.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-4-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:05 +01:00
Markus Armbruster a30ecde6e7 net: Permit incremental conversion of init functions to Error
Error reporting for netdev_add is broken: the net_client_init_fun[]
report the actual errors with (at best) error_report(), and their
caller net_client_init1() makes up a generic error on top.

For command line and HMP, this produces an mildly ugly error cascade.

In QMP, the actual errors go to stderr, and the generic error becomes
the command's error reply.

To fix this, we need to convert the net_client_init_fun[] to Error.

To permit fixing them one by one, add an Error ** parameter to the
net_client_init_fun[].  If the call fails without returning an Error,
make up the same generic Error as before.  But if it returns one, use
that instead.  Since none of them does so far, no functional change.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:04 +01:00
Markus Armbruster ca7eb1848b net: Improve error message for -net hubport a bit
Type "hubport" is valid only with -netdev.  Unfortunately, that's
detected late and the error message doesn't explain why:

    $ qemu-system-i386 -net hubport,id=foo,hubid=0
    qemu-system-i386: -net hubport,id=foo,hubid=0: Device 'hubport' could not be initialized

Improve the error message to "Parameter 'type' expects a net type".

Not fixed: -net hubport without the parameters required by -netdev
hubport still asks for those parameters:

    $ qemu-system-i386 -net hubport
    qemu-system-i386: -net hubport: Parameter 'hubid' is missing

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-2-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27 09:51:04 +01:00
Scott Feldman 890ee6abb3 net: add MAC address string printer
We can use this in virtio-net code as well as new Rocker driver code, so
up-level this.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11 14:49:03 +01:00
Paolo Bonzini 7fb439115d net: synchronize net_host_device_remove with host_net_remove_completion
Using net_host_check_device is unnecessary.  qemu_del_net_client asserts
for the non-peer case that it can only process NIC type NetClientStates,
and that assertion is valid for the peered case as well, so move it and
use the same check in net_host_device_remove.  host_net_remove_completion
is already checking the type.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1419353600-30519-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-12 19:59:39 +00:00
Gonglei c65476612a vhost: Remove superfluous '\n' around error_report()
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10 08:15:33 +03:00
Peter Maydell 0048fa6c80 pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
 All of ACPI refactoring has been merged.
 Legacy pci commands have been dropped.
 virtio header cleanup
 initial patches from virtio-1.0 branch
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
 kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
 MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
 WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
 HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
 w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
 =LY/j
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (130 commits)
  acpi: drop unused code
  aml-build: comment fix
  acpi-build: fix typo in comment
  acpi: update generated files
  vhost user:support vhost user nic for non msi guests
  aml-build: fix build for glib < 2.22
  acpi: update generated files
  Makefile.target: binary depends on config-devices
  acpi-test-data: update after pci rewrite
  acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
  pci-hotplug-old: Has been dead for five major releases, bury
  pci: Give a few helpers internal linkage
  acpi: make build_*() routines static to aml-build.c
  pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
  pc: acpi-build: drop template patching and create PCI bus tree dynamically
  tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
  pc: acpi-build: simplify PCI bus tree generation
  tests: add ACPI blobs for qemu with bridge cases
  tests: bios-tables-test: add support for testing bridges
  tests: ACPI test blobs update due to PCI0._CRS changes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	hw/pci/pci-hotplug-old.c
2015-03-09 09:14:28 +00:00
Haifeng Gao 24f938a682 vhost user:support vhost user nic for non msi guests
Currently, vhost user nic doesn't support non msi guests(like pxe stage) by default.
Vhost user nic can't fall back to qemu like normal vhost net nic does. So we should
enable it for non msi guests.

Signed-off-by: Haifeng Gao <gaohaifeng.gao@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-03 17:55:36 +01:00
Markus Armbruster f43e47dbf6 QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix use
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().

Most of its users assume the function can't fail.  Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.

Just two users remain, in util/qemu-config.c.  Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26 14:49:31 +01:00