This commit expands all uses of the INLINE macro and drop it.
The reason for this is to avoid clashes with external libraries with
bad name conventions and also because renaming keywords is not a good
practice.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
By just never doing write-backs. This is completely invisible to the
guest, as the entire storage area is implemented as device state (at
realize time the entire drive is read in).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sync_page() was conditionalizing it's whole fn body on the bdrv being
non-null. Just return for the function immediately on NULL brdv and
get rid of the big if.
Makes implementation consistent with flash_zynq_area().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The array regs is declared with IOMMU_NREGS (3) elements and accessed
using IOMMU_CTRL (0) and IOMMU_BASE (8). In most cases, those values
are right shifted before being used as an index which results in indices
0 and 1. In one case, this right shift was missing for IOMMU_BASE which
results in an out-of-bounds write access with index 8.
The patch adds the missing shift operation also for IOMMU_CTRL where
it is needed only for cosmetic reasons.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Add VMStateDescription for GT64120 PCI emulation used by the Malta
platform, to allow it to work with savevm/loadvm and live migration.
The entire register array is saved/restored using VMSTATE_UINT32_ARRAY
(fixed length GT_REGS = 1024).
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
[james.hogan@imgtec.com: Convert to VMState]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* remotes/kvm/uq/master:
hw/mips: malta: Don't boot from flash with KVM T&E
MAINTAINERS: Add entry for MIPS KVM
target-mips: Enable KVM support in build system
hw/mips: malta: Add KVM support
hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
target-mips: kvm: Add main KVM support for MIPS
kvm: Allow arch to set sigmask length
target-mips: get_physical_address: Add KVM awareness
target-mips: get_physical_address: Add defines for segment bases
hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
hw/mips/cputimer: Don't start periodic timer in KVM mode
target-mips: Reset CPU timer consistently
KVM: Fix GSI number space limit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTowW+AAoJECgfDbjSjVRpnMMH/jp3sKGzJumYLbi5ihjmYyND
jYd6ySXoVAjUTgaCvdje5srisOap8pbc783kQvQS4CeWsjZ5Vvh+PZjkBPIqF1pD
celxGQ43CY7QSUWq+02Dg9VIUwLwZqdKlxNsV01FligQn+ZBQ6sQ6ksWx7oGzqRt
5/HMZykbwUvSk/4xGUaMn2+/4uhQ0Wz5EsCkv9L/u8kS72k6ldc/tCGZMzBUNHTM
rW5FPYwMQP0MXgGTXnlLEQjJ7Lozc66IaMZoHw/a/aGSIxdag9Otj0ADuXq6yZaV
Xi4O/EOJWd1JpSG7w8LOyIZNakpHkU43fmJCLzBjDAupHeRp57TcW5ox4PJYAtg=
=Oxdt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio,hotplug fixes, enhancements
numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (109 commits)
numa: use RAM_ADDR_FMT with ram_addr_t
qapi/string-output-visitor: fix bugs
tests: simplify code
qapi: fix input visitor bugs
acpi: rephrase comment
qmp: add ACPI_DEVICE_OST event handling
qmp: add query-acpi-ospm-status command
acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
acpi: introduce TYPE_ACPI_DEVICE_IF interface
qmp: add query-memory-devices command
numa: handle mmaped memory allocation failure correctly
pc: acpi: do not hardcode preprocessor
qmp: clean out whitespace
qdev: recursively unrealize devices when unrealizing bus
qdev: reorganize error reporting in bus_set_realized
qapi: fix build on glib < 2.28
qapi: make string output visitor parse int list
qapi: make string input visitor parse int list
tests: fix memory leak in test of string input visitor
hmp: add info memdev
...
Conflicts:
include/hw/i386/pc.h
[PMM: fixed minor conflict in pc.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Support PSCI 0.2 when using KVM
* fix AIRCR reset value for v7M CPUs
* report correct size information for pflash_cfi01
* minor coverity fixes
* avoid warnings on Windows builds due to #define clash
* implement TTBCR PD0/PD1 bits
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=IOau
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140619' into staging
target-arm:
* Support PSCI 0.2 when using KVM
* fix AIRCR reset value for v7M CPUs
* report correct size information for pflash_cfi01
* minor coverity fixes
* avoid warnings on Windows builds due to #define clash
* implement TTBCR PD0/PD1 bits
# gpg: Signature made Thu 19 Jun 2014 18:35:06 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140619:
armv7m_nvic: fix AIRCR implementation
Use PSCI v0.2 compatible string when KVM or TCG provides it
target-arm: Introduce per-CPU field for PSCI version
target-arm: Implement kvm_arch_reset_vcpu() for KVM ARM64
target-arm: Enable KVM_ARM_VCPU_PSCI_0_2 feature when possible
target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64
kvm: Handle exit reason KVM_EXIT_SYSTEM_EVENT
hw/block/pflash_cfi01: Report correct size info for parallel configs
hw/arm/vexpress: Forbid specifying flash contents in two ways at once
target-arm/translate-a64.c: Fix dead ?: in handle_simd_shift_fpint_conv()
target-arm/translate-a64.c: Remove dead ?: in disas_simd_3same_int()
target-arm: Add ULL suffix to calculation of page size
hw/arm/spitz: Avoid clash with Windows header symbol MOD_SHIFT
target-arm: implement PD0/PD1 bits for TTBCR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In KVM trap & emulate (T&E) mode the flash reset region at 0xbfc00000
isn't executable, which is why the minimal kernel bootloader is loaded
and executed from the last 1MB of DRAM instead.
Therefore if no kernel is provided on the command line and KVM is
enabled, exit with an error since booting from flash will fail.
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The returned reset value was wrong (off by one zero nibble), and
qemu didn't log unimplemented writes to the PRIGROUP field.
Signed-off-by: Oran Avraham <oranav@gmail.com>
Message-id: 1403010447-4627-1-git-send-email-oranav@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we have PSCI v0.2 emulation available for KVM ARM/ARM64 or TCG then
we need to provide PSCI v0.2 compatible string via generated DTB.
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
Message-id: 1402901605-24551-9-git-send-email-pranavkumar@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the flash device is configured with a device-width which is
not equal to the bank-width, indicating that it is actually several
narrow flash devices in parallel, the CFI table should report the
number of blocks and the size of a single device, not of the whole
combined setup. This stops Linux from complaining:
"NOR chip too large to fit in mapping. Attempting to cope..."
As usual, we retain the old broken but backwards compatible behaviour
when the device-width is not specified.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402409025-25694-1-git-send-email-peter.maydell@linaro.org
Detect attempts by the user to specify the contents of the first flash
device via both -bios and -drive if=pflash... simultaneously and
print a helpful error message.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402419834-25982-1-git-send-email-peter.maydell@linaro.org
The Windows headers provided by MinGW define MOD_SHIFT. Avoid
it by using SPITZ_MOD_* for our constants here.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
emits event when ACPI OSPM evaluates _OST method
of ACPI device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... using TYPE_ACPI_DEVICE_IF interface.
Which provides status reporting of ACPI declared memory devices
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... it will be used to abstract generic ACPI bits from
device that implements ACPI interface.
ACPIOSTInfo type is used for passing-through raw _OST
event/status codes reported by guest OS to a management
layer. It lets management tools interpret values
as specified by ACPI spec if it is interested in it.
QEMU doesn't encode these values as enum, since it
doesn't need to handle them and it allows interface
to scale well without any changes in QEMU while guest
OS and management evolves in time.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
but use one provided by environment, in addition
force C style preprocessing so that 'gcc -E' or
"clang -E" wouldn't ignore .dsl files.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the patch was posted that became 5c21ce7 (qdev: Realize buses
on device realization, 2014-03-12), it included recursive realization
and unrealization of devices when the bus's "realized" property
was toggled.
However, due to the same old worries about recursive realization
and prerequisites not being realized yet, those hunks were dropped when
committing the patch. Unfortunately, this causes a use-after-free bug
(easily reproduced by a PCI hot-unplug action).
Before the patch, device_unparent behaved as follows:
for each child bus
unparent bus ----------------------------.
| for each child device |
| unparent device ---------------. |
| | unrealize device | |
| | call dc->unparent | |
| '------------------------------- |
'----------------------------------------'
unrealize device
After the patch, it behaves as follows instead:
unrealize device --------------------.
| for each child bus |
| unrealize bus (A) |
'------------------------------------'
for each child bus
unparent bus ----------------------.
| for each child device |
| unrealize device (B) |
| call dc->unparent |
'----------------------------------'
At the step marked (B) the device might use data from the bus that is
not available anymore due to step (A).
To fix this, we need to unrealize devices before step (A). To sidestep
concerns about recursive realization, only do recursive unrealization
and leave the "value && !bus->realized" case as it is.
The resulting flow is:
for each child bus
unrealize bus ---------------------.
| for each child device |
| unrealize device (B) |
| call bc->unrealize (A) |
'----------------------------------'
unrealize device
for each child bus
unparent bus ----------------------.
| for each child device |
| unparent device |
'----------------------------------'
where everything is "powered down" before it is unassembled.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
No semantic change.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: resolve conflicts
Add the numa_info structure to contain the numa nodes memory,
VCPUs information and the future added numa nodes host memory
policies.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
[Fix hw/ppc/spapr.c - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.
Additional checks for validity:
- requires `-numa node,memdev=..`
- requires `-device virtio-net-*`
The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Handle the feature bits negotiation when using vhost-user. Allow
the underlying implementation to have a finer control over all the
bits except the VIRTIO_NET_F_MAC.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The initialization takes a chardev backed by a unix domain socket.
It should implement qemu_fe_set_msgfds in order to be able to pass
file descriptors to the remote process.
Each ioctl request of vhost-kernel has a vhost-user message equivalent,
which is sent over the control socket.
The general approach is to copy the data from the supplied argument
pointer to a designated field in the message. If a file descriptor is
to be passed it will be placed in the fds array for inclusion in
the sendmsg control header.
VHOST_SET_MEM_TABLE ignores the supplied vhost_memory structure and scans
the global ram_list for ram blocks with a valid fd field set. This would
be set when the '-object memory-file' option with share=on property is used.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use vhost_set_backend_type to initialise a proper vhost_ops structure.
In vhost_net_init and vhost_net_start_one call conditionally TAP related
initialisation depending on the vhost backend type.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Decouple vhost from the Linux kernel by introducing vhost_ops. The
intention is to provide different backends - a 'kernel' backend based on
the ioctl interface, and an 'user' backend based on a UNIX domain socket
and shared memory interface.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_init will replace devfd and devpath with a single opaque argument.
This is initialised with a file descriptor. When TAP is used (through
vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in
VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and
pass the fd.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This decouples virtio-net from the TAP netdev backend and allows support
for other backends to be implemented.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The poll callback needs to be called when bringing up or down
the vhost_net instance. As it is not mandatory for an NetClient
to implement it, invoke it only when it is set.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generalize the features get/ack to be used for both vhost-net and vhost-scsi.
In vhost-net add vhost_net_get_feature_bits to select the feature bit set
depending on the NetClient kind.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It's hard to track all mac addresses and their configurations (e.g
vlan or ipv6) in qemu. Without this information, it's impossible to
build proper garp packet after migration. The only possible solution
to this is let guest (who knows all configurations) to do this.
So, this patch introduces a new readonly config status bit of virtio-net,
VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce
presence of its link through config update interrupt.When guest has
done the announcement, it should ack the notification through
VIRTIO_NET_CTRL_ANNOUNCE_ACK cmd. This feature is negotiated by a new
feature bit VIRTIO_NET_F_ANNOUNCE (which has already been supported by
Linux guest).
During load, a counter of announcing rounds is set so that after the vm is
running it can trigger rounds of config interrupts to notify the guest to build
and send the correct garps.
Cc: Liuyongan <liuyongan@huawei.com>
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
also make handler edge based to avoid losing events, the same as
it has been done for PCI and CPU hotplug handlers.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Needed for Windows to use hotplugged memory device, otherwise
it complains that server is not configured for memory hotplug.
Tests shows that aftewards it uses dynamically provided
proximity value from _PXM() method if available.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... it will be used by acpi-build code and by unit tests
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- provides static SSDT object for memory hotplug that can handle
upto 256 hotplugable memory slots
- SSDT template for memory devices and runtime generator
of them in SSDT table.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify PIIX4_PM/ICH9LPC device about hotplug event,
so that it would send SCI to guest notifying about
newly added memory.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the link will used later to access device implementing
ACPI functions instead of adhoc lookup in QOM tree.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds an optional subsection that allows to migrate current
state of acpi_memory_hotplug of ACPI PM device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add memory hotplug initialization/handling to ICH9 LPC device
and enable it by default for post 2.0 machine types
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Propeties of object should be available after its instances_init()
callback is finished and not added in PCIDeviceClass.init which is
roughly corresponds to realize() method.
Moving properties adding into instances_init will fix missing
property error when global/compat property mechanism is used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add memory hotplug initialization/handling to PIIX4_PM device
and enable it by default for post 2.0 machine types
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: resolve conflict in pc.h
Luiz Capitulino
Peter Maydell
Peter Crosthwaite
Stefan Weil
Sanjay Lal
Gerd Hoffmann
James Hogan
Oran Avraham
Pranavkumar Sawargaonkar
Igor Mammedov
Paolo Bonzini
Wanlong Gao
Nikolay Nikolaev
Jason Wang
Markus Armbruster
Michael S. Tsirkin