Convert the sbuf structure to a VMStateDescription.
Note this uses the VMSTATE_WITH_TMP mechanism to calculate
and reload the offsets based on the pointers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Convert the migration of the struct tcpcb to use a VMStateDescription,
the rest of it will come later.
Mostly mechanical, except for conversion of some 'char' to uint8_t
to ensure portability.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
ASAN detects an "unknown-crash" when running pxe-test:
/ppc64/pxe/spapr-vlan: =================================================================
==7143==ERROR: AddressSanitizer: unknown-crash on address 0x7f6dcd298d30 at pc 0x55e22218830d bp 0x7f6dcd2989e0 sp 0x7f6dcd2989d0
READ of size 128 at 0x7f6dcd298d30 thread T2
#0 0x55e22218830c in tftp_session_allocate /home/elmarco/src/qq/slirp/tftp.c:73
#1 0x55e22218a1f8 in tftp_handle_rrq /home/elmarco/src/qq/slirp/tftp.c:289
#2 0x55e22218b54c in tftp_input /home/elmarco/src/qq/slirp/tftp.c:446
#3 0x55e2221833fe in udp6_input /home/elmarco/src/qq/slirp/udp6.c:82
#4 0x55e222137b17 in ip6_input /home/elmarco/src/qq/slirp/ip6_input.c:67
Address 0x7f6dcd298d30 is located in stack of thread T2 at offset 96 in frame
#0 0x55e222182420 in udp6_input /home/elmarco/src/qq/slirp/udp6.c:13
This frame has 3 object(s):
[32, 48) '<unknown>'
[96, 124) 'lhost' <== Memory access at offset 96 partially overflows this variable
[160, 200) 'save_ip' <== Memory access at offset 96 partially underflows this variable
The sockaddr_storage pointer is the sockaddr_in6 lhost on the
stack. Copy only the source addr size.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
NC-SI (Network Controller Sideband Interface) enables a BMC to manage
a set of NICs on a system. This model takes the simplest approach and
reverses the NC-SI packets to pretend a NIC is present and exercise
the Linux driver.
The NCSI header file <ncsi-pkt.h> comes from mainline Linux and was
untabified.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously we would always send an RDNSS option in the RA, making the guest
try to resolve DNS through IPv6, even if the host does not actually have
and IPv6 DNS server available.
This makes the RDNSS option enabled only when an IPv6 DNS server is
available.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Do not hardcode the RA size at all, use a pl_size variable which
accounts the accumulated size, and fill rip->ip_pl at the end.
This will allow to make some blocks optional.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Coverity points out (CID 1005725) that an error-exit path in tcp_listen()
will try to close(s) even if the reason it got there was that the
qemu_socket() failed and s was never opened. Not only that, this isn't even
the right function to use, because we need closesocket() to do the right
thing on Windows. Change to using the right function and only calling it if
needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The mbuf code currently doesn't check the result of doing a malloc()
or realloc() of its data (spotted by Coverity, CID 1238946).
Since the m_inc() API assumes that extending an mbuf must succeed,
just convert to g_malloc() and g_free().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Check the return value from qemu_socket() rather than trying to
pass it to bind() as an fd argument even if it's negative.
This wouldn't have caused any negative consequences, because
it won't be a valid fd number and the bind call will fail;
but Coverity complains (CID 1005723).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The blocksize option is defined in RFC 1783 and RFC 2348.
We now support block sizes between 1 and 1428 bytes, instead of 512 only.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
if_start() goes through the slirp->if_fastq and slirp->if_batchq
list of pending messages, and accesses ifm->ifq_so->so_nqueued of its
elements if ifm->ifq_so != NULL. When freeing a socket, we thus need
to make sure that any pending message for this socket does not refer
to the socket any more.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Brian Candler <b.candler@pobox.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
struct arphdr is already used by the system headers on OpenBSD
and thus QEMU does not compile here anymore. Fix it by renaming
our struct to slirp_arphdr instead.
Reported-by: Brad Smith
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com
Buglink: https://bugs.launchpad.net/qemu/+bug/1613133
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but
they keep coming back. checkpatch.pl tries to flag them since commit
5d596c2, but it's not very good at it. Offenders tracked down with
Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated
version of the script from commit 312fd5f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Provide basic support for stateless DHCPv6 (see RFC 3736) so
that guests can also automatically boot via IPv6 with SLIRP
(for IPv6 network booting, see RFC 5970 for details).
Tested with:
qemu-system-ppc64 -nographic -vga none -boot n -net nic \
-net user,ipv6=yes,ipv4=no,tftp=/path/to/tftp,bootfile=ppc64.img
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Commit fad7fb9ccd ("Add IPv6 support to the TFTP code")
refactored some common code for preparing the mbuf into a new
function called tftp_prep_mbuf_data(). One part of this common
code is to do a "memset(m->m_data, 0, m->m_size);" for the related
buffer first. However, at two spots, the memset() was not removed
from the calling function, so it currently done twice in these code
paths. Thus let's delete these superfluous memsets in the calling
functions now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This adds the RDNSS option to IPv6 router advertisements, so that the guest
can autoconfigure the DNS server address.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
Changes since last submission:
- Disable on windows, until we have support for it
They look like fe80::%eth0
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
Changes since last submission:
- fix windows build
This makes get_dns_addr address family-agnostic, thus allowing to add the
IPv6 case.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Separate get_dns_addr into get_dns_addr_cached and get_dns_addr_resolv_conf
to make conversion to IPv6 easier.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).
This patch is the result of coccinelle script
scripts/coccinelle/round.cocci
CC: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move it to the actual users. There are some inclusions of
qemu/host-utils.h in headers, but they are all necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu/osdep.h is included in some headers twice - one time
should be sufficient.
Also remove the inclusion of time.h since that is already
done by osdep.h, too (this makes scripts/clean-includes
happy again).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
These hunks are apparently not used anymore, so let's delete them.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The slirp code does not use index() and gethostid() anymore,
so these parts can be removed without problems.
memmove() and strerror() should be available on each of the
supported platforms nowadays, too, so these wrappers are also
not needed anymore.
And we certainly also do not support Ultrix anymore, so no
need to keep the code for this platform anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
There are a lot of unused #defines / #undefs in slirp_config.h,
which are apparently left-overs from the very early slirp code.
Since there is no more code that uses them, let's simply remove
them from our version of slirp.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
On Darwin, connect, sendto and friends want the exact size of the sockaddr,
not more (and in particular, not sizeof(struct sockaddr_storaget))
This commit adds the sockaddr_size helper to be used when passing a sockaddr
size to such function, and makes use of it int sendto and connect calls.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is broken since commit c619644067.
Reported-by: Michael Fritscher <michael@fritscher.net>
Tested-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
slirp currently only handles ECONNREFUSED in the case where connect()
returns immediately with that error; since we use non-blocking sockets,
most of the time we won't receive the error until we later try to read
from the socket. Ensure that we deliver the appropriate RST to the
guest in this case.
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When the host aborts (RST) its side of a TCP connection we need to
propagate that RST to the guest. The current code can leave such guest
connections dangling forever. Spotted by Jason Wessel.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[steven@steven676.net: coding style adjustments]
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Samuel Thibault pointed out that it's possible that slirp_pollfds_poll()
will try to use a socket even after soread() returns an error, resulting
in an use-after-free if the socket was removed while handling the error.
Avoid this by refusing to continue to work with the socket in this case.
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
While adding the IPv6 support, the commit eae303ff23
("slirp: Make Socket structure IPv6 compatible") changed the format of
the migration stream, without taking into account that we might still
receive an old migration stream layout when upgrading from QEMU version
2.5 (or older) to QEMU 2.6. Currently, QEMU bails out when doing a
migration from QEMU 2.5 to the recent master version when it has
been started with a "-net user,guestfwd=..." network. So let's fix
this by checking the version ID of the migration stream and by using
the old behavior if we've detected version 3 or less.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
struct mbuf uses a C99 open char array to allow inlining data. Inlining
this in another structure is however a GNU extension. The inlines used
so far in struct Slirp were actually only needed as head of struct
mbuf lists. This replaces these inline with mere struct quehead,
and use casts as appropriate.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After automatic cleanup to remove unnecessary #includes of headers that
osdep.h provides, slirp.h has a few now unnecessary #ifdef/#endif pairs;
remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1456237112-32662-2-git-send-email-peter.maydell@linaro.org
Add the handler code for incoming TFTP packets to udp6_input(),
and make sure that the TFTP code can send packets with both,
udp_output() and udp6_output() by introducing a wrapper function
called tftp_udp_output().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch adds an IPv6 address to the DNS relay. in6_equal_dns() is
developed using this Slirp attribute.
sotranslate_in/out/accept() are also updated to manage the IPv6 case so the
guest can be able to join the host using one of the Slirp addresses.
For now this only points to localhost. Further development will be needed to
automatically fetch the IPv6 address from resolv.conf, and announce this via
RDNSS.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch adds IPv6 case in TCP functions refactored by the last
patches.
This also adds IPv6 pseudo-header in tcpiphdr structure.
Finally, tcp_input() is called by ip6_input().
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
No code change.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Basically, this patch adds some switch in various TCP functions to
prepare them for the IPv6 case.
To have something to "switch" in tcp_input() and tcp_respond(), a new
argument is used to give them the sa_family of the addresses they are
working on.
This patch does not include the entailed reindentation, to make proofread
easier. Reindentation is adressed in the following no-op patch.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch factorizes the tcpiphdr structure to put the IPv4 fields in
an union, for addition of version 6 in further patch.
Using some macros, retrocompatibility of the existing code is assured.
This patch also fixes the SLIRP_MSIZE and margin computation in various
functions, and makes them compatible with the new tcpiphdr structure,
whose size will be bigger than sizeof(struct tcphdr) + sizeof(struct ip)
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This adds the sin6 case in the fhost and lhost unions and related macros.
It adds udp6_input() and udp6_output().
It adds the IPv6 case in sorecvfrom().
Finally, udp_input() is called by ip6_input().
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Adding icmp6_send_error to send ICMPv6 Error messages. This function is
simpler than the v4 version.
Adding some calls in various functions to send ICMP errors, when a
received packet is too big, or when its hop limit is 0.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Disambiguation : icmp_error is renamed into icmp_send_error, since it
doesn't manage errors, but only sends ICMP Error messages.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch adds the functions needed to handle IPv6 packets. ICMPv6 and
NDP headers are implemented.
Slirp is now able to send NDP Router or Neighbor Advertisement when it
receives Router or Neighbor Solicitation. Using a 64bit-sized IPv6
prefix, the guest is now able to perform stateless autoconfiguration
(SLAAC) and to compute its IPv6 address.
This patch adds an ndp_table, mainly inspired by arp_table, to keep an
NDP cache and manage network address resolution.
Slirp regularly sends NDP Neighbor Advertisement, as recommended by the
RFC, to make the guest refresh its route.
This also adds ip6_cksum() to compute ICMPv6 checksums using IPv6
pseudo-header.
Some #define ETH_* are moved upper in slirp.h to make them accessible to
other slirp/*.h
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-10-git-send-email-peter.maydell@linaro.org
This patch simply adds a unsigned short family argument to remove the hardcoded
"AF_INET" in the call of qemu_socket().
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A unsigned short is now passed in argument to udp_attach instead of using a
hardcoded "AF_INET" to call qemu_socket().
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch makes solookup() compatible with varying address
families, by using a new sockaddr_equal() function that compares
two sockaddr_storage.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
solookup() was only compatible with TCP. Having the socket list in
argument, it is now compatible with UDP too.
Some optimization code is factorized inside the function (the function
look at the last returned result before browsing the complete socket
list).
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch factorizes some duplicate code into a new function,
sotranslate_out(). This function perform the address translation when a
packet is transmitted to the host network. If the packet is destinated
to the host, the loopback address is used, and if the packet is
destinated to the virtual DNS, the real DNS address is used. This code
is just a copy of the existent, but factorized and ready to manage the
IPv6 case.
On the same model, the major part of udp_output() code is moved into a
new sotranslate_in(). This function is directly used in sorecvfrom(),
like sotranslate_out() in sosendto().
udp_output() becoming useless, it is removed and udp_output2() is
renamed into udp_output(). This adds consistency with the udp6_output()
function introduced by further patches.
Lastly, this factorizes some duplicate code into sotranslate_accept(), which
performs the address translation when a connection is established on the host
for port forwarding: if it comes from localhost, the host virtual address is
used instead.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch replaces foreign and local address/port couples in Socket
structure by 2 sockaddr_storage which can be casted in sockaddr_in.
Direct access to address and port is still possible thanks to some
\#define, so retrocompatibility of the existing code is assured.
The ss_family field of sockaddr_storage is declared after each socket
creation.
The whole structure is also saved/restored when a Qemu session is
saved/restored.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In if_encap, a switch is added to prepare for the IPv6 case. Some code
is factorized.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Basically, this patch replaces "arp" by "resolution" every time "arp"
means "mac resolution" and not specifically ARP.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Before this patch, if sosendto fails, udp_input is executed as if the
packet was sent, recording the packet for icmp errors, which does not
makes sense since the packet was not actually sent, errors would be
related to a previous packet.
This patch adds a goto bad to cut the execution of this function.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
eth.h and slirp.h both define ETH_ALEN and ETH_P_IP
rtl8139.c and eth.h both define ETH_HLEN
Move the related constant (ETH_P_ARP) from slirp.h to eth.h, and
remove the duplicates; make slirp.h include eth.h
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Casting pointers to long won't work on 64 bit Windows.
It is not needed with the right format strings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When guest sends udp packet with source port and source addr 0,
uninitialized socket is picked up when looking for matching and already
created udp sockets, and later passed to sosendto() where NULL pointer
dereference is hit during so->slirp->vnetwork_mask.s_addr access.
Fix this by checking that the socket is not just a socket stub.
This is CVE-2014-3640.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Reported-by: Xavier Mehrenberger <xavier.mehrenberger@airbus.com>
Reported-by: Stephane Duverger <stephane.duverger@eads.net>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 20140918063537.GX9321@dhcp-25-225.brq.redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here we don't check the return value of malloc() which may fail.
Use the g_new() instead, which will abort the program when
there is not enough memory.
Also, use g_strdup instead of strdup and remove the unnecessary
strdup function.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Grub fails to boot from internal TFTP server when loading more than
3 initrd files.
Grub first opens a session to the TFTP server for every initrd file and
retrieves only the file size for all.
Then it wants to download the content using the old sessions which are
already expired.
Increasing the maximum number of session of the internal TFTP
server avoids this issue.
The error message reads as following:
error: timeout reading
`/boot/ISO.ROOT/BOOTMGR'.
Press any key to continue...
Signed-off-by: Bernhard Übelacker <bernhardu@vr-web.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The zero_ethaddr[] array is never used; delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Do not special-case addresses with zero host part, as we do not
necessarily know how big it is, and the guest can fake them anyway.
Silently avoid having 0.0.0.0 as a destination, however.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
[Edgar: Minor change to subject]
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
These errors don't seem user initiated, so forcibly printing to the
monitor doesn't seem right. Just use error_report.
Drop lprint since it's now unused.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* it's -> its
* grammar fix in ui/vnc-enc-zywrle.h
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
If slirp needs to emulate tcp timeout, then the timeout value
for mainloop should be more precise, which is determined by
slirp's fasttimo or slowtimo. Achieve this by swap the logic
sequence of slirp_pollfds_fill and slirp_update_timeout.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Each slirp has its own time to caculate timeout.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
"0xf << 28" shifts right into the sign bit, since 0xf is a signed
integer. Use the 'U' suffix to force an unsigned shift to avoid
this undefined behaviour and a clang sanitizer warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
port redirection code uses SO_REUSEADDR socket option before binding to
host port. Behavior of SO_REUSEADDR is different on Windows and Linux.
Relaunching QEMU with same host and guest port redirection values on Linux
throws error but on Windows it does not throw any error.
Problem is discussed in http://lists.gnu.org/archive/html/qemu-devel/2013-04/msg03089.html
Signed-off-by: Taimoor Mirza <tmirza@codesourcery.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch allows the hostfwd option to override the restrict=y setting in
the user network stack, as explicitly stated in the documentation on the
restrict option:
restrict=on|off
If this option is enabled, the guest will be isolated, i.e. it
will not be able to contact the host and no guest IP packets
will be routed over the host to the outside. This option does
not affect any explicitly set forwarding rules.
Qemu bug tracker:
https://bugs.launchpad.net/qemu/+bug/829455
Signed-off-by: Gertjan Halkes <qemu@ghalkes.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Some source files #include the same header more than
once for no good reason. Remove second #includes in
such cases.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
